Database Info

Kaiser Sim Unlocker

Kaiser Sim Unlocker v0.1
========================
Brought to you by jockyw2001
(c)2008 jockyw2001
You definitely save money by using this unlocker, so consider a donation for me to keep the R&D going
Click here to send your PayPal donation.
Download links:
Rapidshare
Megaupload
Note for WM6.1 users
================
Do not try this on 6.1! You will need to downgrade to 6.0
Note for Vista users
===============
This guide will explain how to change your drivers to the xp. You will have problems running the unlocker otherwise. Log in as administrator if you run the ROM update tool and unlocker. That also applies to XP users.
Instructions
============
(The instructions below take preference since they are more current than the readme in the package)
1. To verify you have installed the right HardSPL do this: power off and then press power on while keeping camera pressed, this will enter the so called bootloader mode and you see a tri-color screen (Red, Green, Blue). You should see "SPL-1.0 OliPof" on the second line in the top left corner. You can exit this mode by means of a "soft reset": press the reset button with the stylus.
2. Make a note of the radio version that is currently installed. You see the version strings in the splash screen which appears soon after power on (e.g. "R 1.27.14.09"). Since we will flash a special radio in step 5 you need to flash back your original radio in the last step. You can download radio roms from XDA devs here.
3. Connect PC and Kaiser with a USB cable and keep it connected until the last step.
4. Power on the Kaiser and let it boot into Windows Mobile. On the PC make sure the activesync icon is green
5. After you unpacked the download you see directories "step1" and "step2". Go into "step1" and run KaiserCustomRUU.exe. This will flash the special patched radio rom. Follow the instructions until it is finished.
Note that you can also skip step 6. and proceed with step 7.
6. Power off your Kaiser and insert a 'strange' SIM, i.e. a SIM from another provider than the one your phone is locked to.
7. Once Windows Mobile has booted up it will (usually after you have entered the usual 4-digit PIN) show a window called "Simlock" and a textbox where you can enter a 8-digit unlockcode. Now perform a soft reset by pressing the reset button *but* at the same time keep the camera button pressed. If you did it well you will be back in bootloader mode and you see the tri-color screen. The best technique is to press and hold the camera button first and then shortly press the reset button with the stylus.
8a. right-click activeync icon and uncheck "Allow USB connections" from Connection Settings
8b. On your PC go into the "step2" directory and run "kaiser-simunlocker.exe". If all went well you will see the unlockcode on your monitor and your Kaiser is being restarted automatically.
8c. right-click activeync icon and check "Allow USB connections" from Connection Settings
You should see this:
Code:
=== Kaiser Sim Unlocker (c)2008 by jockyw2001
=== Donations happily accepted, paypal to [email][email protected][/email]
Your Unlockcode = 12345678
[] Done, enter the unlockcode
[] And then flash your original radio
Press Enter to exit
Note: If you skipped step 6 then you should now also skip step 9. and continue with step 9x
9. Once Windows Mobile has booted up it will again show the "Simlock" window. When prompted (usually immediately after you have entered the usual 4-digit SIM PIN), enter the the 8-digit unlockcode and your phone is permanently SIM unlocked
Now proceed to step 10.
9x. (Only if you skipped steps 6. and 9.): Run \windows\simlock.exe on your Kaiser and enter the 8-digit unlockcode when you are prompted.
In order to see simlock.exe you have to open file explorer then click menu > and show all files. If you can still not find simlock.exe copy the attached one to the phone's "My Documents" directory and run it from there.
10. Download the original radio from here to the "step3" directory on your PC and flash it with KaiserCustomRUU.exe
That's all folks
Now you can look forward to some other great tools which I will release soon: "Kaiser SuperCID" and "Kaiser Radio Dumper"
Enjoy and ... donate to keep R&D going! Thx!
JockyW
Credits
=======
* Tom Codon and unkown for testing
* des, pof and olipro for SSPL and HardSPL
* arc and all the other great minds at XDA devs
* viperbjk, adfree and all other QC hackers at Modopo
* PURESKILLZZZ for supplemental instructions here
(c)2008 jockyw2001
[email protected]
Jan 19th 2008

Thanks jockyw2001... trying now, will post feedback

Thanks! Appreciate it: I thought it was just a hype, trying....
Just unlocked...Thanks!!

WoW! Great job JockyW!!!!
Will try it out when I get home!

Nice works my friend...!
Keep up it and don't forget supporting niki device

great great and greater
il conna try it by first daylight thanx and great affoert regards

Great!! Thanks!! Keep up the good work!

gonna try as soon as my battery is over 50%.. will post result
THNX MAN

Instructions followed to the letter here and no dice. At step two i get an error, it reads: "\\.\WCEUSBSH001: No such file or directory cannot connect"
Any help would be appreciated, my OS is Vista Ultimate x64.

kamikaze_decoy said:
my OS is Vista Ultimate x64.
Click to expand...
Click to collapse
Bug detected !!!

Can it apply to all models? such as UK...Thanks...

kamikaze_decoy said:
Instructions followed to the letter here and no dice. At step two i get an error, it reads: "\\.\WCEUSBSH001: No such file or directory cannot connect"
Any help would be appreciated, my OS is Vista Ultimate x64.
Click to expand...
Click to collapse
See if u can find a PC with XP
I stay far away from Vista and never tested it on Vista.
But maybe this helps.

bwqipzbpd said:
Can it apply to all models? such as UK...Thanks...
Click to expand...
Click to collapse
Yes, and goodluck!

Can I use different radio since my original radio is not available for download (my original radio is 1.27.12.29) ?
I use a Kaiser on the UK Orange and I have flashed my phone to Dutty's Rom.
Thank you so much.

Im a UK Orange user. When I spoke to HTC a few months back, the guy I spoke to suggested that Orange are actually using a modified version of the radio rom.
Has anyone using a Kaiser on the UK Orange tried a different radio rom?
Or has the UK Orange radio rom actually been dumped, so we can upload go back to it after unlocking our "beautifully powerful phone"

benz710 said:
Can I use different radio since my original radio is not available for download (my original radio is 1.27.12.29) ?
Thank you so much.
Click to expand...
Click to collapse
You can, but each radio has it's pros and cons. Maybe you should wait until I release my radio dumper. No release date for it yet, but I think in 1-2 wk

i have a question on last step where u have to flash back your radio in "step3 folder", for example, if i need to flash back KAIS_Radinly_1.27.12.17_CustomRUU, but in this zip file has CustomRUU.exe and RUU_signed.nbh, should i put this two files in to "step3 folder", and then click on KaiserCustomRUU.exe (step3 folder). OR it doesn't matter which *.exe files i click, because they are same files, but different filename.

waichai said:
i have a question on last step where u have to flash back your radio in "step3 folder", for example, if i need to flash back KAIS_Radinly_1.27.12.17_CustomRUU, but in this zip file has CustomRUU.exe and RUU_signed.nbh, should i put this two files in to "step3 folder", and then click on KaiserCustomRUU.exe (step3 folder). OR it doesn't matter which *.exe files i click, because they are same files, but different filename.
Click to expand...
Click to collapse
If KAIS_Radinly_1.27.12.17_CustomRUU is a .exe then delete KaiserCustomRUU.exe and run KAIS_Radinly_1.27.12.17_CustomRUU.exe

Hi,
On Step2 it give the error:
\\.\WCEUSBSH001: Permission Denied
cannot connect to \\.\WCEUSBSH001
I'm using XP SP2.
Any sugestions ?

jockyw2001 said:
If KAIS_Radinly_1.27.12.17_CustomRUU is a .exe then delete KaiserCustomRUU.exe and run KAIS_Radinly_1.27.12.17_CustomRUU.exe
Click to expand...
Click to collapse
jockyw2001,
is that mean i don't have to use file in "step3 folder" file?

Custom RUU Issue

I was trying to flash my phone to a diffent ROM< but now everytime that i have tryed, it gives me an error - get newer updater. I have used CUstom RUU V. 1 that comes with most roms, and i have used the 5.22. The Hard SPL version is 1.00liPof. Help!!!

I think you may have the wrong section, what phone are u using, i dnt thats a kaiser hardspl

Hard SPL 1.00lipro is a hardspl for the kaiser, i have it on my kaiser. Although the 5.22 he refers to i have no idea what they mean?
Opening poster try to explain in more detail what it is that you are trying to do, i.e. what rom it is that you are trying to install, what windows you are using on your pc etc.
If you cant use that ruu try this one i attached

Ah i see, ive never really had that problem even though ive flashed on xp, vista and 7. Very weird. Try changing Hardspl.Good Luck and use the ruu that has been given here

had that problem
When i switched to windows 7 i had a similar issue. There should be an update now that you plugged your phone in to the c. Try to see if there is a windows update that shows up now.

Hi,
Or Even try to mount a virtual machine in Xp with Vmware or similar...
Good luck
Sat

Update your hardspl to 3.29 or 3.34. The spl you are using is for WM 6.0
http://forum.xda-developers.com/showthread.php?t=498320

sd
flash via micro sd. easy, faster, gets rid of a middle man. and update your spl.
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Kaiser Rom Develpoment Page and unzip/unrar it to your computer
3. Goto the Roms Folder and rename the .nbh file to KAISIMG.nbh
4. Copy the KAISIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Hold in the Power and Camera buttons, then press the reset button with the stylus for about 3 seconds until the BootLoader screen appears
7. You will first see a tri-color screen with the phone and SPL Information at the top
8. A message will then pop up asking you to press the Power button to start the update
9. Press power button to start flashing
10. Once phone finishes flashing and says Update Complete, reset with the stylus
11. When it gets to the screen where it configures the stylus, HARD RESET
(press left and right softkey buttons on the front and hold in reset with stylus until message appears)
12. When prompted, Press "Send Button" (Green Call Button on Front) to Clear Data
13. When prompted, Press "Send Button" (Green Call Button on Front) to Restart Phone
14. Follow onscreen instructions to set up your New Rom​
(from http://forum.xda-developers.com/showthread.php?t=433835)

i use windows seven and have never had any issues flashing roms?
A few kitchens dont work in seven though, so building is a bit hit and miss but flashing has never been a problem

Flashed or Not

Hi it seems like I need to do a new thread for this, I just need answers thank you
*upon checking my phone
I have this
ROM Version: 3.29.707.0 WWE
ROM Date: 05/07/08
Radio Version: 1.65.16.25
Protocol Version: 25.83.20.02H
and as I learn to check what Hard SPL is installed in my device (thanks to you guys ) it says 3.29. 0000 or something like that, so my question is... does my phone already have been flashed? if so can i skip to to loading the Rom i wanted, i do need help thanks
if not this is from mskip
1. MAKE SURE YOUR KAISER HAS AT LEAST 50% BATTERY POWER FIRST
2. Download and Unzip *THIS* File
3. Flash HardSPL 3.29 [ESSENTIAL]
Flashing via ActiveSync with USB Lead
1. Copy JumpSPL1.56-KAIS.exe, JumpSPL1.93-KAIS.exe and JumpSPL1.94-KAIS.exe to your device memory (NOT STORAGE CARD)
2. Pull out the battery and reinsert it (this step IS important) *DONT turn phone back on yet*
3. REMOVE SIM and SD CARDS!!
4. Turn phone back on and let it boot back into your operating system
5. Connect your phone to PC with a USB cable and wait until it syncs with your PC
6. Run File Explorer on your phone, browse to where you copied JumpSPL1.56-KAIS.exe on your device and run it (make sure the USB cable is still connected). If you get a white screen then reset your device and now try JumpSPL1.93 and lastly try JumpSPL1.94 if that one doesnt work.
7. CLick Continue on phone when prompted
8. After a few seconds the tri colour screen will appear on the phone and "USB" will be displayed at the bottom
9. Unplug the usb cable for 30 seconds and then Replug (phone will not re-sync but still says "USB" on the screen)
10. Right click on the Activesync icon in the bottom corner icon on the computer, goto connection settings, deselect "Allow USB connections" and click "ok"
11. Run the KaiserCustomRUU.exe file on your PC thats in the same folder as the HardSPL .nbh file and follow instructions (ticking boxes and clicking Next) *DO NOT re-enable USB Connections in Activesync*
12. Update will goto 100% (should take less than a minute), the Congratulations screen will be displayed on the PC and the phone will restart
13. Unplug USB cable from phone then REPLACE SIM and SD CARDS !!
14. Restart phone
*Remember to re-enable "Allow USB connections" in Activesync connection settings after a successful flash*
Flashing via MicroSD Card using cmonex HardSPL 3.29 [OPTIONAL]
FOR UPGRADING HARDSPL ONLY!! THIS WONT WORK UNLESS YOU ALREADY HAVE HARDSPL ON YOUR PHONE
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download Cmonex's HardSPL 3.29SD, unzip it and copy the 2 files into the root of your MicroSD Card
(KAISDIAG.NBH is basically an SSPL patched to load from SD without booting OS)
(KAISIMG.NBH is cmonex HardSPL 3.29)
3. Insert the microSD Card into the phone
4. Hold in the Power and Camera buttons, then press the reset button with the stylus for about 3 seconds until the BootLoader screen appears
5. It should say Loading / Update in progress and then to a screen saying SPL 1.00.OliNex
6. It should now say Press Power Button to flash or just flash the KAISIMG.NBH and then reset
7. At this point it should boot to the OS, if it doesn't then flash an OS (delete the previous KAISDIAG.NBH and KAISIMG.NBH from the SD Card and use Flashing Rom from MicroSD Card method)
8. After the Operating System loads, DELETE the KAISDIAG.NBH and KAISIMG.NBH files
*To check HardSPL version on your phone Enter Bootloader by Holding in the Power and Camera buttons, press the reset button with the stylus for 3 seconds until the tri-colour screen appears, then read the 2nd line which is the SPL version*
4. SIM and CID-Unlock [OPTIONAL]
For more reading go *HERE*
* YOUR DEVICE MUST BE SYNCHED WITH YOUR COMPUTER BEFORE RUNNING EACH STEP *
*Put your phone into Bootloader and update to a 6.1 Rom first if you get a black screen after Flashing the Patched Radio*
*If the program wont run u may need to install Microsoft .NET 2.0 on your computer to get it working*
1. Make a note of your current Radio in case you need to flash it back
2. Run KaiserUnlocker.exe, follow the instructions
(if you already have HardSPL on your phone you can skip straight to Step2)
3. After patched Radio has been flashed phone will restart and sync with the computer
4. On the Unlocker Program it should say Radio Patched at the bottom
5. Click on Step3 (Run Unlocker). This will bring up the Unlocker screen on your phone
6. If you want to check the status of your Sim Lock or CID Lock click the appropriate buttons
7. Click on Remove Sim Lock and Set CID, then click "Commit Changes"
* IF YOU DONT NEED TO FLASH A NEW ROM THEN PROCEED TO STEP6 TO PUT YOUR DESIRED RADIO BACK*
Click to expand...
Click to collapse
are the instructions from flashing hard spl 3.29 below it or what? I'm just confused coz' I found this tutorial here in the forums also http://forum.xda-developers.com/showpost.php?p=2498297&postcount=10
Im just confused thanks

If you are confused, stop.
Re-read again and again, until it makes sense. Understanding the huge material around here is not to be taken in only one day.
I spent my early days 2 weeks by merely reading, collecting tools (and patches) before even attempting to flash.

I just needed an answer if my phone's already flashed that's it if it is flashed could i skip now on flashing my desired rom? that's just it, just answers from experts. I'm reading btw.

any help will do

On bootloader will say Hard if have hard-spl.
You could have asked in teh thread rather than starting new so as to keep forum clean.
On that note thread closed.

[Q] Flashing MAGLDR

Guys, Help, I get to No 3 of the instructions listed below, the box disapears and nothing else happens, any tips on how to over come the problem, keep the suggestions simple please
1. FLASH MAGLDR TO YOUR DEVICE
The Original MAGLDR Thread by Cotulla is *HERE*
NOTE1: LEO512 and LEO1024 are both supported
NOTE2: MAGLDR doesn't replace OSPL/HSPL. It runs in the chain after. So it's safe to install and remove it
NOTE3: You can flash between 1.11, 1.12 and 1.13 versions on Magldr without losing your NAND Rom
1. Synch Phone with PC in Windows Mobile!!! It has to be connected to activesync or WMDC via USB cable
NOTE: As an alternative method to activesync you can restart your phone in Bootloader Mode, then connect the usb cable and wait until 'usb' appears in the bottom half of your phones screen
2. Browse to the folder you extracted your Magldr Package files to on your pc, right click on ROMUpdateUtility.exe and select Run as Administrator
3. Tick the box to confirm you are aware of the risks and select 'Next'
4. Tick the box to confirm you have followed the preperation steps and select 'Next'
* The program will now check the usb connection *
5. Select 'Update'
6. Verify the image you will flash (it should say 2.00.000.0) and Select 'Next'
7. Read the process list and Select 'Next'
8. Your phone will enter BootLoader Mode and the progress will goto 100%
9. Your phone will now Reboot. Congrats, you just flashed MAGLDR.
NOTE: To Enter MAGLDR Menu Screen after installation, Long Hold the Power Button when resetting the phone and the menu will appear

[Q] flashing MAGLDR onto a htc hd2

Guys, Help, I get to No 3 of the instructions listed below, the box disapears and nothing else happens, I have downloaded from the links from here http://forum.xda-developers.com/showthread.php?t=893948, from these links
3. Download MAGLDR 1.13 package from *HERE* and extract to an empty folder on your pc
4. Download a NAND Android ROM from *THIS* Forum and extract to an empty folder on your pc any tips on how to over come the problem, keep the suggestions simple please
I've followed the instructions, but keep failing at No3 ....
Please help, lol, and keep it simple lol
1. FLASH MAGLDR TO YOUR DEVICE
The Original MAGLDR Thread by Cotulla is *HERE*
NOTE1: LEO512 and LEO1024 are both supported
NOTE2: MAGLDR doesn't replace OSPL/HSPL. It runs in the chain after. So it's safe to install and remove it
NOTE3: You can flash between 1.11, 1.12 and 1.13 versions on Magldr without losing your NAND Rom
1. Synch Phone with PC in Windows Mobile!!! It has to be connected to activesync or WMDC via USB cable
NOTE: As an alternative method to activesync you can restart your phone in Bootloader Mode, then connect the usb cable and wait until 'usb' appears in the bottom half of your phones screen
2. Browse to the folder you extracted your Magldr Package files to on your pc, right click on ROMUpdateUtility.exe and select Run as Administrator
3. Tick the box to confirm you are aware of the risks and select 'Next'
4. Tick the box to confirm you have followed the preperation steps and select 'Next'
* The program will now check the usb connection *
5. Select 'Update'
6. Verify the image you will flash (it should say 2.00.000.0) and Select 'Next'
7. Read the process list and Select 'Next'
8. Your phone will enter BootLoader Mode and the progress will goto 100%
9. Your phone will now Reboot. Congrats, you just flashed MAGLDR.
NOTE: To Enter MAGLDR Menu Screen after installation, Long Hold the Power Button when resetting the phone and the menu will appear