Database Info

O2 Connect Problem

Guys, I am a newbie and really need your help here.
I have problem with my O2 Connect Application. Everytime I run this application it keep saying "02 Connect application is designed for O2 devices, which can't run on other devices". I think my device is an O2 device. Why this message always appear instead of running the O2 Connect application?

if you have 2005 then you dont have an official o2 rom
in which case the program cant tell that you have an o2 phone

You mean WM2005? Still Looking for it, mine is still WM2003. It's funny that other O2 that I found all have O2 Connect on it and 'working good'.

you posted your question in the forum called
Windows Mobile 2005

HI all,
Is there anyway that this app - O2 Connect, to work on the WM5 ?

Bluetooth Dailup?

Hello,
Im a new owner of a HTC S710, i like the phone and i previously owned a Orange SPC C600. And im a proud owner of an Dell Axim X51v.
In the past i could go discover with my Dell Axim the bluetooth devices and see the c600 and see its bluetooth dailup service. i used that to automatically make connection with the phone and dail up when i the axim needed a connection.
But now with the S710 it only finds an accesspoint to witch it won't connect. and i really want the dailup back so it automatically connects.
How can that be done?
Greetings, Marcus

DJ-Marcuzz said:
Hello,
Im a new owner of a HTC S710, i like the phone and i previously owned a Orange SPC C600. And im a proud owner of an Dell Axim X51v.
In the past i could go discover with my Dell Axim the bluetooth devices and see the c600 and see its bluetooth dailup service. i used that to automatically make connection with the phone and dail up when i the axim needed a connection.
But now with the S710 it only finds an accesspoint to witch it won't connect. and i really want the dailup back so it automatically connects.
How can that be done?
Greetings, Marcus
Click to expand...
Click to collapse
You will want to install the Widcomm BT stack on your Axim. It supports BT PAN client mode.
Also see my related articles - I've published a LOT of articles on this problem.

Hello,
I have the widcomm stack on my axim, and it worked fine with my C600 but now with the S710 the service just is not there? There is no option for a bluetooth dailup when clicking on cennect to a phone for internet.
Greetings

DJ-Marcuzz said:
Hello,
I have the widcomm stack on my axim, and it worked fine with my C600 but now with the S710 the service just is not there? There is no option for a bluetooth dailup when clicking on cennect to a phone for internet.
Greetings
Click to expand...
Click to collapse
Use BT PAN and read http://www.pocketpcmag.com/blogs/index.php?blog=3&p=1415&more=1&c=1&tb=1&pb=1 for the why's.

HI!
I had a Blue Angel, I used to conect to my other phone(CDMA) via bluetooth for dialup net access(I get free Mb per month there plus its faster(EVDO). My Vox does not see the dial up service on my other phone. Is there anyway to make it find the dial up service?

Cisco CallManager??

Hey everyone just wondering if anyone knew of a way to use a WM6 device to a Cisco CallManager as an extension on the system?
-=*)RADAR(*=-

YUP,
I'm curious about this too!
Anyone no how to do this?

This may not be what you're asking, but is the Cisco CallManager the "soft phone" app for their Internet phone? If so, I use the Plantronics PersonoCall (free) app. They have a personal and an enterprise version, but they both seem to work the same.
With a Plantronics multipoint BT headset like the 510 or 615 and the BUA100 BT dongle, answering or making a call on either is seamless, the headset switches back and forth between my PPC-6800 and the soft phone without doing anything on the headset.
I've tried this program with other headsets and dongles, but none work as well as this combination.

Well lemme go into more detail here:
I run a cisco voip network both at home & at work. I would like to use my mobile phone (kaiser aka tilt running Death4 ROM) over WiFi and have it become basically an "extension" on the system. Configuring things on both ends is not a problem since I'm the network admin. Just wasnt sure what software I needed on the windows mobile side, or if it was even possible!
I'm going to look into this software further, thanx for the reply either way!
-=*)RADAR(*=-

I did find a software that I have already tested (as of right now) that works perfectly!
hxxp://www.ipblue.com/products_vtgo_ppc.asp
Very minimal setup, and pretty robust!
-=*)RADAR(*=-

I don't know what version of Call Manager you are running (Call Manager Express, UC500 or Call Manager Appliance). You can do what you want from your kaiser installing in it a Softphone that uses SIP or Skinny (I don't know if exists). On the other hand, you have to have a VPN client in your kaiser installed because remember Cisco sees the extensions as a MAC Address, and you have "to be" inside your netkork. So, raise up a VPN tunnel against your work or home, take an IP Address from there and your SIP phone is gonna log into your call manager as if you was inside your office.
What's the problem I have? I'm know using Kaiser or Windows Mobile device and I don't know any softphone. I don't know what to use. I want to know if exists any free software but I also want to know which ones are paid.
Good Luck.
Guido.

hi, do you have any soulution for HTC VOX (710) "[ROM] Snap v1.4 [build 21040]" ? I tried "VTGO for PocketPC " but i cannot install this app.
thank you

Configure WLAN(Wifi) Static IP address in Non Touch Windows Mobile 6.5 Smartphone

hi,
I have LG GW550.
I have Wifi Router setup at home, without using DHCP.
So my home computer use to connect to Router using static IP.
Now i tried to find out the way to configure in my Smartphone.
But didnt find anything.
Could you please help me to set the Static IP of WLAN adapter from my smartphone.
Thanks in advace.
Chintan,

Dear: I need (Fixed/Static IP) for WM6.1 Non Touch Benq E72. I did before but could not found same solution again on internet. So excuse me and help to find it.
Thanks
Sadat007

VyprVPN on WM 6.1

hi all,
I'm trying to set up a vpn connection on my WM 6.1 device, using Giganews' VyprVPN, but I can't seem to make it work at all.
On wifi, it shows as Connected but my IP isn't changed. On 3g, it doesn't connect at all so far (french operator Bouygues)
Has anyone already used this successfully ? It is supposed to be working with WM (PPTP)
Thanks,

Moved as not software release.