With my HTC P3300 a have some problem with the overclocking program. I install'd it with the cab and the OmapClock.Ink is now in the startup folder and the OmapClock.exe and the OmapClockPlus are in the program files.
After a softreset it still wont work, wel it work and i can regiter the consul but the normal omapclock is still reset it self to 186Mhz. I get a message that something is wrong with the link in the startup folder, its not safe enough or i need some certificate to run it. Even when i put it in stand by i get te alarm message that the link wont work.
So how can help me?
Thanks!
Related
When I try to uninstall any software from my jamin (prophet) i get the following message: "this program was not completely removed. do u want to remove it from the list of installed programs."
And in fact the program is not removed at all and I have to delete the files manually, then go to the registry etc...
If i try to uninstall from activesync on the pc, the uninstall windows will simply shut, and uninstall would not proceed.
On the "first days" of my jamin this odd behavior never happened.
Any clue about this?
Thanks all
Have you moved things around? Manually changed program directories?
Usually there are 2 possible causes for the problem:
1) The program is running so the files are in use and cannot be deleted.
2) The files are located in a different directory then the one they were installed to, so uninstall can't find them.
You could try using MemMaid to get read of unused files and registry settings.
levenum said:
Have you moved things around? Manually changed program directories?
Usually there are 2 possible causes for the problem:
1) The program is running so the files are in use and cannot be deleted.
2) The files are located in a different directory then the one they were installed to, so uninstall can't find them.
You could try using MemMaid to get read of unused files and registry settings.
Click to expand...
Click to collapse
Thanks for ur reply. But it is not due to either of the 2 causes u mention...
Same happening to me and it's driving me crazy!
please someone help!
You're problems may not be from device side but from software side...
I also had this problem as a developer when i used releases for 2003 devices on 2005 devices (they work well no doubt about it but the message error ocures constantly). The main problem comes with softwares that have a customised setup.
Cheers,
Raul
xusso said:
Same happening to me and it's driving me crazy!
please someone help!
Click to expand...
Click to collapse
Whenever I have had this a soft reset normally solves it.
In other words when you see the error message "not successfully uninstalled do you want to remove the files in the installed list" answer NO then soft reset and try again.
BTW if the program has a today plugin - this should be unchecked before doing the soft reset.
Matt
his has hapened to me also with my Qtek S200 WWE.
But if I soft reset my device and once it boot's up (after quite some time Evil or Very Mad ) I unistall whatever I need to uninstall, then it works just fine.
I have also noticed that by using "Freeup Ram" (part of SKTools) then I'm able to unistall without problems.
Best regards,
Rayan
I have a Qtek 9100, I installed teh A2DP cab file, but didnt remember to add the DLL files to the Windows library first.
My filemanager now hangs cause i tried to open the Windows library so the symbol for working keeps running around on the screen for ages, but nothing happens.
Is there a way to save my settings and files and avoid a total reset of my unit???
Please dont get mad i looked every where to see if this had already been posted. When i run Hard-SPL I keep geting to 260 error it starts just fine asks me if i will grant access to the application which i do and it starts to do its thing but then halts and i get the 260 error and it dose not go any farther any suggestions?
did you remove your sim and sd card?
In addition, if you have not removed them back up your data. Then do a hard reset. Then remove sim and sd card. It maybe an open port problem so restart your computer as well. Hope this helps.
tried
Gave that a try after it asks if it is alright to load the file on my phone it auto resets phone then 260 error happening again im on vista 64 bit and even tried what the main website said for vista users but half the guide dose not really apply so im not sure what to do or what im doing wrong. any more suggestions?
Need Help
Anyone that has been able to run HardSPL on a vista 64bit system please point me in the right direction I really want to set up my custom roms on my phone that I have found! Please help!!!!!!!!
sorry i couldn't help you i always thought a 260 error was due to open connections or ports.
When you downloaded the zip file for hardspl did you use vista's unzip?
If so you may get an error because vistas unzip program sucks ass and you need to use another application to unzip the hardspl software.
crazigamer said:
Anyone that has been able to run HardSPL on a vista 64bit system please point me in the right direction I really want to set up my custom roms on my phone that I have found! Please help!!!!!!!!
Click to expand...
Click to collapse
Did you go through the connection settings in the mobile device manager and disable usb connections?
Are you using vista..sometimes it doesnt look for a new set of drivers for the Phone when its in tri color mode..try rebooting and leaving the phone in tri color mode...once you do that, start from scratch after it gets all the drivers installed
This advice is thanks to tochill. Try this and see if it works. Vista often does not automatically load the drivers. I used Vista 64 to flash without a problem. It was a little tricky to get it to load the drivers at first but after they are loaded you should be fine. If it doesn't work let me know and I will see if I can find the drivers for it.
Also make sure you have the most updated version of Windows mobile device center.
not sure what to do
When am I suppose to disable usb connections of the phone in WMDC ? and also I used winrar to extract the folder. also the phone auto reboots after it is promted to allow the program to launch to install hardspl and then I get the same 260 error again any more suggestions? Im sorry for all the trouble here I just really want to get this to work. everyone said it was easier to mod tilts but it seems to be harder then my iphone lol
update ur drivers if ur using vista
for me vista was a pain to flash so i just use my desktop which is xp and its happy flashing for me all the way...piece of cake now after u do it a few times
crazigamer said:
When am I suppose to disable usb connections of the phone in WMDC ? and also I used winrar to extract the folder. also the phone auto reboots after it is promted to allow the program to launch to install hardspl and then I get the same 260 error again any more suggestions? Im sorry for all the trouble here I just really want to get this to work. everyone said it was easier to mod tilts but it seems to be harder then my iphone lol
Click to expand...
Click to collapse
Before you connect your phone.
You don't need to do any of that. What you need to do is DL the USB driver from A/S & associate it with you device in WMDC. There are several good threads on doing it. Start Here: http://forum.xda-developers.com/showthread.php?t=291723
Even tried xp
I have even tried using XP I still get the same outcome my phone auto restarts after I tell it to run the program. What am I doing wrong? I am suppose to run the main file off of my PC not the phone correct? and just go trough the setup?
Can some one tell me how they did it step by step because I have followed the instructions on the HARDSPL main thread and it dose not work. And so I am correct this will work with the new ATT Tilt right?
tried all of that still dose not work any other vista run arounds? God i wish i still had my xp discs
Please feel free to message me on aim username is kl3pto really could use some help.
GSLEON3 said:
You don't need to do any of that. What you need to do is DL the USB driver from A/S & associate it with you device in WMDC. There are several good threads on doing it. Start Here: http://forum.xda-developers.com/showthread.php?t=291723
Click to expand...
Click to collapse
Thanks that was a thread I was looking for to post to the OP as the next step. I have had to reinstall vista 5 times and each 5 times had to do something different to get it to work.
NP, I also suggest with Vista, you flash HardSPL via Jump. Don't flash ROM's or Radios with JumpSPL, but with the 1.93 SPL, I have tons more success using the Flash HardSPL method than the .exe
how do i get rid of Extended_ROM? i see some .cab, .exe files n an autorun.exe in it..
i think these r the setup files which contniously get installed after the Screen Alignment..
n sometimes it goes to bootloader mode (shows "Serial v 1.0...") after a soft reset..but after restarting the ppc is works fine..
so as long as i'm having this extended_ROM it's gonna be a sleeping menace to me..
so plz..can anybody help?
i have a problem. my omnia i900 has not working touchscreen and i want to use the second option to control-use my phone with trackpad/mouse but because my touchscreen is not working at all i must change settings to use trackpad instead of touchscreen by remote control(activesync) through computer. how can i do this, can anyone help me.
Install MyMobiler in you pc. It'll allow you to use your PC to control the connected phone.
mymobiler doesnt work for me because when i start my mobiler on computer the phone wants me to accept remote acces and because the touchscreen is not working i cannot accept it. i want to know exactly what program to use AND EXACTLY what to do to change settings on the phone(which file to change or overwrite and with what file to overwrite on phone windows through my computer)
TOUCHSCREEN IS NOT VALID SO I CANT CLICK ON YES OR NO(accept or deny) IN ANY CASE
please write me the exact process
Hey watch the freakin' caps n bold! I'm trying to help here.
Can you access any app? With a simple registry change you can use the trackpad like a mouse pointer... Set the "HKLM\System\State\Samsung\Mouse\ActionMethod" value to "3001" (without quotes).
Else you could do it with Mortscript (do you have it installed?). Just place the script attached in "Windows\Startup" and reboot your phone.
exactly, i cant install any app to phone, because if I want to install it, the phone will ask me to accept/allow the installation, and because touchscreen is not working I cant click on screen to allow installation so the only way to solve my problem is to change registry(to activate mouse/trackpad instead of touchscreen) by connecting computer and phone using activesync on my computer.
I have no experience with registry changing, I even dont know how to find the registry(hklm) and even dont know how to change it so I need exact instruction, but remember, I dont know where it is(reg) and how to change it. So please write me the exact instruction, step by step. Tnx for sending me mouse.zip file. I will use the file when somebody will ive me instruction how to do it.
I know to connect the phone with computer, I know how to use activesync, but to work with registry i am a rookie.
OR
please tell me the exact instruction with mortscript. is it connected with mouse.zip or is mouse.zip standalone script to repair the problem. I dont know how to use mortscript, I did what u wrote- I copy morthscript into phone windows/startup. at the same point i extracted mouse.zip into windows/startup. so both are in startup folder. please give me a little bit more detailed instrution about this. tnx
You know I just fired up my old i910 and with windows button I was able to enable mouse without touching the screen. Swipe dpad to get to settings navigate and enable.
good day.
I don't think he'll be able to send the "Ok" to the window...
Ok I've adapted it again...
Extract the files from mouse2.zip. Place "fix.lnk" in the startup folder and place the other two files on the root of the device (internal memory... not storage or memory card). Reboot the device.