Core Player Updated!!! - Touch Cruise General

There is a new version of CorePlayer out (v1.1.3) that it is supposed to fix the video issue in the TC.
http://www.mobihand.com/product.asp?id=8905

palmbluetooth said:
There is a new version of CorePlayer out (v1.1.3) that it is supposed to fix the video issue in the TC.
http://www.mobihand.com/product.asp?id=8905
Click to expand...
Click to collapse
Got it. the QTV is working very well. I can't compare with the 1.1 version, but GDI benchmark on 320x240 is 149% and the QTV(for Kaiser, TC) is 239%. So it seems to have improved, but as I said, I havent compared with 1.1

still no test version?...great

A trial would be much appreciated.

Could it be compared to the last Freeware edition, the TCPMP 0.81?

Looks good!
I tried this test http://www.pdamania.hu/uploads/teszt.avi file with a free version 0.72RC1 and the Core Player 1.1.3.
Results:
TCPMP Version 0.72RC1 Benchmark Results
Average Speed 27.17%
Core Player 1.1.3
Average Speed 79.80%
I think this is the first step for the better video driver.

With the same test as post above I get 70.06%

That's good news. Too bad however, Coreplayer's interface is about as bad as it gets. Not to mention that the issues of performance are not limited to only watching vids.

palmbluetooth said:
There is a new version of CorePlayer out (v1.1.3) that it is supposed to fix the video issue in the TC.
http://www.mobihand.com/product.asp?id=8905
Click to expand...
Click to collapse
really nice videos now, but with coreplayer installed, make a new photo, and try to open it u won't be able to open the photo...

g0r3t3x said:
really nice videos now, but with coreplayer installed, make a new photo, and try to open it u won't be able to open the photo...
Click to expand...
Click to collapse
This is serious

Can confirm that installing coreplayer 1.1.3 breaks the camera. it seems i can no longer take a valid jpg picture.

I have CorePlayer 1.1.3 installed.
Camera works the same as before, no changes
T

Camera works here as well, I can't see how installing this app would make any difference to the camera

Weird,
So i did a hard reset, and this time installed coreplayer 1.1.3 to the device, rather than the SD card. After doing this i get no problems.

bencassie said:
Weird,
So i did a hard reset, and this time installed coreplayer 1.1.3 to the device, rather than the SD card. After doing this i get no problems.
Click to expand...
Click to collapse
I installed it on the device too, but problem remains the same even after the soft reset. CANNOT TAKE A VALID JPEG PIC ANYMORE WITH THE CAMERA.
Uninstalled Coreplayer v1.1.3 and after soft reset , camera was working fine again and I could see a picture taken in the album.
Even tried dissociating JPEG files from coreplayer's recognised files but no luck.
Anyone found the solution yet????
Thanks.

I have the same problem !!!
Has anyone found a solution ???
and has the guys from Coreplayer adressed the issue ???

bencassie said:
Can confirm that installing coreplayer 1.1.3 breaks the camera. it seems i can no longer take a valid jpg picture.
Click to expand...
Click to collapse
The same!!! need help...
THX!

i have this problem too

I have the same problem with damaged jpg pictures from camera. But it seems after installing CorePlayer, taking some (damaged photos) and than soft reset, the problem is solved for me (it still works).

spellshaper said:
I have the same problem with damaged jpg pictures from camera. But it seems after installing CorePlayer, taking some (damaged photos) and than soft reset, the problem is solved for me (it still works).
Click to expand...
Click to collapse
works fine, thank you

Related

Video drivers

Hi guys,
hopefully will be returning my I-Mate 9502 soon, and the only device I can imagine replacing it with is a Pro.
Are video drivers present? I read a few threads, but can't find a solid answer. Can the Pro at least play VGA video at full framerate? Can it do this through TV-out? I want to be able to play a divX video from my PC without having to convert.
Also, are there any other horiffic bugs/problems that I should know about that will stop me doing basic things?
Cheers,
Mike
I would also like to know answer for that question before purchasing touch pro. I learned from the mistake of buying kaiser without getting familiar to it's bugs before buying it.
Please someone run gxmark on your touch pro and tell me what score do you get! download gxmark here
edit. with kaiser i scored somewhere around 1550. So hopefully its at least that with touch pro.. and much better.
And please, someone with touch pro, run coreplayer benchmark and any D3D benchmark apps and keep us posted. Those numbers would tell us a lot how the device is managing. This would benefit all the users who are considering to swap their kaiser to TP.
Touchscreen Bug
Yes. I am also looking forward to touch pro. Only one thing interests me and hasn't been completely answered even in diamond forum: can anyone test if THE TOUCHSCREEN BUG from devices like tytn II still exist when playing a game that requires continuous stylus on screen (skyforce reloaded for ex, or call of duty 2). i saw some videos on youtube with a guy playing an emulator on the diamond and it was flawless. If that is the case, then I'm clear to buy this puppy.
rakdoll said:
I would also like to know answer for that question before purchasing touch pro. I learned from the mistake of buying kaiser without getting familiar to it's bugs before buying it.
Please someone run gxmark on your touch pro and tell me what score do you get! download gxmark here
edit. with kaiser i scored somewhere around 1550. So hopefully its at least that with touch pro.. and much better.
And please, someone with touch pro, run coreplayer benchmark and any D3D benchmark apps and keep us posted. Those numbers would tell us a lot how the device is managing. This would benefit all the users who are considering to swap their kaiser to TP.
Click to expand...
Click to collapse
I couldn't get gxmark to work, just got a plain white screen. I'll try something else later and test the video playing if nobody else does but I'm just having dinner right now
@ukdj78
If its not an issue can you try out this http://www.glbenchmark.com/GLBenchmark_Community_Full_1_02_WM5_CM.cab , you will need to register at www.glbenchmark.com to view the results. Can you post them here please?
Can you also try running this video as well
http://www.glbenchmark.com/videos/GLBenchmarkPro_High.wmv
Thanks.
Video playing is flawless using Coreplayer, and using the TV-Out cable has absolutely no effect on performance.
I'm not a big believer in benchmarks, but out of interest I ran benchmarks Coreplayer using DirectDraw, GDI, Raw FrameBuffer and QTV Display, just to see whether "QTV display" is still much better - it isn't - they all come out at roughly 140%. So there isn't the same sort of difference that I got when using "QTV Display" on the Kaiser, but the improvement isn't needed anyway (on the Kaiser the same videos would always return benchmarks under 100% unless I used the "QTV Display").
I've tried seven different 700Mb Xvid .avi movies, and they've all work perfectly. No page tearing or stuttering using CorePlayer. Haven't tried TCPMP, but I'm sure it'd work just as well.
aksd said:
@ukdj78
If its not an issue can you try out this http://www.glbenchmark.com/GLBenchmark_Community_Full_1_02_WM5_CM.cab , you will need to register at www.glbenchmark.com to view the results. Can you post them here please?
Can you also try running this video as well
http://www.glbenchmark.com/videos/GLBenchmarkPro_High.wmv
Thanks.
Click to expand...
Click to collapse
Just ran the test, but I have no idea whether the results are any good. They're attached though...
Just tried a selection of video files from my PC in Windows Media Player on the Touch Pro and here are my findings (Video file info determined with GSpot v2.7):
.WMV file: 640x480 29.96fps 1257kps Audio: 44100Hz stereo 64Kps:
It didn't cope too well with it to be honest, sound was ok but the video only appeared to have about half the framerate of what it should be.
.AVI file: DivX 5/6 Codec 640x480 29.97fps 3164kps Audio: PCM 48000Hz 1536kps
Didn't play the video at all - got sound only (probably no video codec on device)
.AVI file: XVid Codex 720x438 29.97fps 1991kps Audio: MP3 44100Hz 128kps
Didn't play video or sound - came up with the message "Windows Media Player cannot play the file."
.MP4 file: 640x480 24fps 1601kps Audio: MP4 48000Hz Unknown kps
Played perfectly - Very smooth and not noticeably different from performance on my PC
.MPG files: Touch Pro does not recognise this format, wanted to try a PAL DVD quality MPEG 2 file
Looks like MP4 is the way to go for video files then
@sub69
Thanks mate. Its not great, almost identical to the Diamond in 3D performance, maybe the Diamond is a wee bit superior.
Any luck playing the video?
Thanks once again .
@ukdj
Try COrePlayer(which is 20USD) or TPCMP, supports a lot more codecs.
I'll try TCPMP then, used that a lot on my Vario II to play flv files but I originally didn't bother to install it on the touch pro cos I knew it could handle flv files since it had a youtube player built in!
aksd said:
@sub69
Thanks mate. Its not great, almost identical to the Diamond in 3D performance, maybe the Diamond is a wee bit superior.
Any luck playing the video?
Thanks once again .
Click to expand...
Click to collapse
I should declare that I had a few things minimised in the background (ActiveSync, Calendar, Messaging, File Explorer) and push mail was running, so it wasn't exactly a scientific test and I'm sure I could get marginally better results if I could be bothered!
We would expect it to be pretty much identical to the Diamond anyway, wouldn't we?
Video is very jerky if you just try to play it in CorePlayer, but if you run a CorePlayer benchmark on it, it's as smooth as you like. Odd. Much better in WMP, but still jerky.
@sub69 I'm having a little issue with text message notifications, could you do me a quick favour and try this on your touch pro: http://forum.xda-developers.com/showthread.php?t=418089 If you want me to send you a text message to try it out Private message me with your mobile number and I'll send the word "test" to you!
The processor scores maybe higher although I doubt having minimized apps would have affected the 3D benchmarks. Since a lot of folks have mentioned that TF3D is smoother on the Pro than on the Diamond wondered if it was some changes to the 3D acceleration or better s/w optimisation of TF3D.
Did you try to play the video using QTv? Any benchmark values for the video from Coreplayer? btw, that video plays on the Kaiser at about 9-10fps.
Thanks again .
(just wanted to say this) You guys are the best! So much needed info about this, keep on going!
aksd said:
@ukdj
Try COrePlayer(which is 20USD) or TPCMP, supports a lot more codecs.
Click to expand...
Click to collapse
Don't really wanna pay $20 for testing purposes, sorry and TCPMP doesn't work either - another of the many programs I've found which don't seem to like VGA screens I'm using version 0.72RC1 is there a newer one which might work or is this the latest?
EDIT: just found another cab file for TCPMP on the Athena forum which has a different file name to mine, will give that a try!
2nd EDIT lol: No, that was no good either - it wouldn't even install!
You could try the TCPMP which was rebuilt using VS2008 (its in the dev and hacking forum i think)??
gimme a sec i'll get the URL...
EDIT: Here http://forum.xda-developers.com/showthread.php?t=380387
youve probably already tried it but if not, do
EDIT 2: Im getting my Touch Pro soon after i get back from vacation (a week or so) so i will encode some vids into VGA and see how they perform, ive found coreplayer to be great so far with my Hermes so will have a straight comparison using the same files benchmarked both in QVGA and VGA versions on both devices.
Might be worth stating what kinda of formats people are using aswell (XVid/DivX, H261 etc....)
Try the one in this post, this is working on the diamond so high probability it will work on the touch pro.
http://forum.xda-developers.com/showpost.php?p=2061081&postcount=1
Cab at the bottom.
mrvanx said:
You could try the TCPMP which was rebuilt using VS2008 (its in the dev and hacking forum i think)??
gimme a sec i'll get the URL...
EDIT: Here http://forum.xda-developers.com/showthread.php?t=380387
youve probably already tried it but if not, do
EDIT 2: Im getting my Touch Pro soon after i get back from vacation (a week or so) so i will encode some vids into VGA and see how they perform, ive found coreplayer to be great so far with my Hermes so will have a straight comparison using the same files benchmarked both in QVGA and VGA versions on both devices.
Might be worth stating what kinda of formats people are using aswell (XVid/DivX, H261 etc....)
Click to expand...
Click to collapse
Thanks,
I found changing the "Normal buffer size" to about 8000 kb improves video playback dramatically of an XVid file. This video was designed for the Tilt however with a 320x240 video size. I'll have to wait and see how it plays something at 640x480.
aksd said:
The processor scores maybe higher although I doubt having minimized apps would have affected the 3D benchmarks. Since a lot of folks have mentioned that TF3D is smoother on the Pro than on the Diamond wondered if it was some changes to the 3D acceleration or better s/w optimisation of TF3D.
Did you try to play the video using QTv? Any benchmark values for the video from Coreplayer? btw, that video plays on the Kaiser at about 9-10fps.
Thanks again .
Click to expand...
Click to collapse
I guess that the smoother TF3D on the Raphael will be because it's a later build (later than any I ever saw in my Diamond ROM's, anyway).
Didn't get a percentage value for that video...I guess that because of the filetype, CorePlayer "benchmarks" it differently? CorePlayer just told me the bitrate and properties of that high-def file when I ran it's benchmark to the end. Again, QTV, DirectDraw, RawFrameBuffer, and GDI all looked pretty much identical to my untrained eye, but this time I didn't have percentage values to confirm that...
Can i play a 700MB 640x480 X-Vid (or wmv,...) file on a touch pro with coreplayer smoothly? or even a 2x700MB movie? (-->means double bitrate)
Sorry if the question is stupid, but i always read no concrete answer. (means YES or NO)
greetings
empi

divx player for touch pro

this is a very nice player which plays divx movies
http://labs.divx.com/system/files/private/DivXPlayer_PPC.zip
For people having problems to download this file: Try another browser instead of Internet Explorer.
I could download it with Firefox, but when I tried to download it at a friends place with IE, it failed.
So I tried it at home with IE, also problems.
Tried it again with Firefox: No problem
have no problem downloading it with IE7..
you should ditch firefox. its the most sucky browser there is.. go check Opera if you insist on having a better browser as this is the only one better then IE7.
da_jojo said:
have no problem downloading it with IE7..
you should ditch firefox. its the most sucky browser there is.. go check Opera if you insist on having a better browser as this is the only one better then IE7.
Click to expand...
Click to collapse
I hope you're joking! IE7 is terrible. Firefox is vastly superior and can be customised nicely! Opera is great on the PC (Not a huge fan of it on the PPC though); If you want speed, Safari is what you need!
Regarding the Dixv player, there is a slightly newer version available HERE
neil_swann80 said:
I hope you're joking! IE7 is terrible. Firefox is vastly superior and can be customised nicely! Opera is great on the PC (Not a huge fan of it on the PPC though); If you want speed, Safari is what you need!
Regarding the Dixv player, there is a slightly newer version available HERE
Click to expand...
Click to collapse
I just tried this out and was very surprised to note that it played a full size 700 mb movie as well as Coreplayer with "QTV Display". I was only expecting it to be as good as "directdraw" on coreplayer, slow and jittery.
Has anyone tried this program with the TV Out cable? I wonder if it would still have the blue flicker reported when using Coreplayer and TV Out.
P0ll0L0c0 said:
Has anyone tried this program with the TV Out cable? I wonder if it would still have the blue flicker reported when using Coreplayer and TV Out.
Click to expand...
Click to collapse
My TV-Out cable arrives on Friday, so I'll let you know!
neil_swann80 said:
My TV-Out cable arrives on Friday, so I'll let you know!
Click to expand...
Click to collapse
Great, I hope it works. Based on the reviews on Coreplayer and it's TV Out, I'd kind of lost hope on video performance for this phone.
I installed it and got a message that it is outdated and go to mobile.divx.com to get the updated player. The problem is that it requires a login and gives no option to "join". How can I get the updated player??
sndtubes said:
I installed it and got a message that it is outdated and go to mobile.divx.com to get the updated player. The problem is that it requires a login and gives no option to "join". How can I get the updated player??
Click to expand...
Click to collapse
Try the latest one HERE
I have a TV-out cable, and I can confirm that the Divx player doesn't have any blue flicker like Coreplayer.
i dl'd the file and it said i installed the wrong file even though i installed the right cab file.
Thanks Guys,
I think the link should have been Here instead.
How long does it run for before it expires?
Cheers,
D.
Zaim2 said:
I have a TV-out cable, and I can confirm that the Divx player doesn't have any blue flicker like Coreplayer.
Click to expand...
Click to collapse
Awesome. Can someone confirm the video quality over TV Out with this program? The two questions I have specifically are the following: Does the processor slow down any further when exporting via tv out - or does the tv out hardware take over? Also - when exporting to a widescreen tv, does the image stretch to the right aspect ratio, or does it only get wide making the image look fat?
Sorry P0ll0L0c0 unable to confirm TV Out performance as I don't have a cable, I can confirm that the app's not bad, it does however reset your backlight settings to 5 mins on battery and 10 mins on power but forgets to return them to original settings on exit.
Other than that, good work.
D.
got my pro and the tv-out cable today.
from what i can say is that the divx player sucks big time
coreplayer is the one to go for. but yes, i also have that blue flickering when using qtv. any fix for it already? still using the o2 stock rom if that matters.
TarKin said:
got my pro and the tv-out cable today.
from what i can say is that the divx player sucks big time
coreplayer is the one to go for. but yes, i also have that blue flickering when using qtv. any fix for it already? still using the o2 stock rom if that matters.
Click to expand...
Click to collapse
I guess it must depend on the file. I've got a 700 mb copy of Hellboy that plays just as good on the divx player when compared to coreplayer using qtv. Since qtv doesn't work with tv out due to the blue flicker, the divx player has the advantage in my opinion.
I'm now tempted to buy a tv out cable to see how good output will be - but I think they're overpriced right now.
The Divx player stutters with every avi file I've tried on my device. Core player on QTV setting is by far the best (although you get the blue flicker on TV-Out). It's not too bad on the Direct Draw setting when using TV-Out, watchable.
Hopefully the next release of Core Player will solve this issue.
Guys I just chimed in on this thread. I just got my 8gig card and now I want to try out a movie on my phone. I have the latest version of TCPMP installed on my phone. Should I go with the Coreplayer you guys have been talking about on this thread? Also I don't understand what you guys were talking about in using the tv out input etc... I am switching from a Palm Treo to the Pro and I am trying to use this phone for all it's worth. Please help me. Thanks!!!!
mmotown said:
Guys I just chimed in on this thread. I just got my 8gig card and now I want to try out a movie on my phone. I have the latest version of TCPMP installed on my phone. Should I go with the Coreplayer you guys have been talking about on this thread? Also I don't understand what you guys were talking about in using the tv out input etc... I am switching from a Palm Treo to the Pro and I am trying to use this phone for all it's worth. Please help me. Thanks!!!!
Click to expand...
Click to collapse
seems like u can either use coreplayer or the divx player on our devices. There is just a conflict weather it works with our phones TV/out. (Our phones can output video to a TV with a special cable)
im interested in this. Installing the divx player now to test some 700mb movies.
brooksthepro said:
seems like u can either use coreplayer or the divx player on our devices. There is just a conflict weather it works with our phones TV/out. (Our phones can output video to a TV with a special cable)
im interested in this. Installing the divx player now to test some 700mb movies.
Click to expand...
Click to collapse
So I should uninstall TCPMP and install coreplayer or divx?

TCPMP works on HD2

Hello all,
I don't know if there is already a post concerning that.
After many hours of search, i found a version of TCPMP which is operationnal on HD2 !!!!
URL : http://portegeclub.ru/file/multimedia/TCPMP-0.72RC1-GF5500Edition-Alpha4-CAB.rar
IF you are like me, the first video was completly green .... so open TCPMP, go to options/video and choose GDI instead of Directdraw
I hope that is going to help you, beacause personnally, i'm fed up about DIVX player (i have to big fingers ;-))
PS : sorry for Thierry Henry hand against Ireland .....
for me it also worked when in directdraw options I choose YV12 and with better performance than GDI
for it doesn't work with YU12 option but with YUY2 option
Thanks kheni - crashed my hd2 about 5 or 6 times trying to play video earlier today on loads of tcpmp hacks - this does the trick nicely
I've downloaded before the Alpha4.1 cab for this.. not sure whether it's the same. But I can't find the YUY2 thingy in any part of the setting. Care to elaborate further?
Edit: I've found the setting. Seems like there is no difference between the two cabs.
Request
For Firiel & Kheni
Like Sian, Could you please tell me where you find the YV12/YUY2?
Thanks in davance
Franky
pierre duras said:
For Firiel & Kheni
Like Sian, Could you please tell me where you find the YV12/YUY2?
Thanks in davance
Franky
Click to expand...
Click to collapse
It's in the "Setting", one of the last under 'Options'. Go to 'Direct Draw', choose it at the 'Select Page'. Then you can see the options to select YUY2.
Interestingly, the movie I encode for Touch HD now playable not only via the HTC Album media player, but also by TCPMP, but sometimes can see the lag. I think the processor is stronger now.
Thanks
Thanks Sian for your quick response.
Goin' to try now.
See you
Franky
You might want to try the "Raw Framebuffer" setting, see how it compares to DirectDraw. (On a TP2 it's faster). You could also try using DirectDraw, but with the "use blitting instead of overlays" box ticked in the DirectDraw settings page. There are lots of interesting combinations to try.
Thanks
Thanks, this version working fine on my HD2 but not read flv files (it crashes my HD2 everytime I test a flv file).
Maybe someone will find THE solution.
Thanks again
Franky
Best config for TCPMP for the HD2
The configuration explained there (http://forum.xda-developers.com/showpost.php?p=5162820&postcount=31) apply to TCPMP too ;-)
LB280772 said:
The configuration explained there (http://forum.xda-developers.com/showpost.php?p=5162820&postcount=31) apply to TCPMP too ;-)
Click to expand...
Click to collapse
and it's a post by you.....way to go for self promotion?
I cant even run it. Everytime I try it crashes immediately
Try this one. Its works fine on my HD2 with 1.43 stock rom.
http://www.4shared.com/file/89175177/89c24ac7/TCPMP_v081RC1Beta_Touch_HD.html
Altough as per first post you do need to change from directdraw to GDI to get rid of the green screen issue.
Its also v0.81 beta which is the last ver made.
Starfury said:
I cant even run it. Everytime I try it crashes immediately
Click to expand...
Click to collapse
Have you tried setting the Video renderer to GDI?
Shasarak said:
Have you tried setting the Video renderer to GDI?
Click to expand...
Click to collapse
I have it working now as I found a recompiled version, but before that you clicked the exe to start it and instant crash, you couldnt even get to a menu to change any settings.
the setting from the first post works for me. THANK YOU!!
Hey Kheni,
Looked for hours to get TCPMP working again on my new HD2 as I watch many series everyday in the train to my work. Great job and many thanx!!! You give me back hours of time killing...
Marc
Guys, I installed and tested the subtitles with this version. Just past the files in the TCPMP program folder. Then options and load the subtitle you want. *.srt works fine!!!
It is the ultimate movieplayer now...
The linkt to the subtitle add on:http://sourceforge.net/projects/tcpmpsubssubtit/files/tcpmpsubssubtit/0.54%20Beta/SUBS054.zip/download
It works!
Have to use direct draw, overlay format yuy2 and unchecked both "overlay with colorkey" and "use device stretching for blitting"
When using GDI rather than directdraw, there is video stuttering during playback

HTC YouTube WVGA for TG01?

I have looked on these and other forums for a working cab of the htc youtube from the touch hd or the blackstone that works on the TG01 but haven't manage to find a working one. I installed the latest certs and htc framework but still cannot play video. It a shame as the quality of the videos is really good. I remember when I had my blackstone the quality on the wvga screen was fab on the tg01 is got to be smoother and better hey?
If someone has ported this can you be so kind to point me in the right direction?
Thanks in advance guys
143 views and nobody can point me to a working version?
Please guys, google youtube is crap. Interface and quality are dreadful.
I have tried the touch hd it version but it doesnt even install. What are the things that I need?
Thanks all in advance
In CorePlayer theres YouTube supports, just change the setting to hight quality and you are set to go.
Hi, thanks for the reply. I know that, the version that I have of core player is the original one that comes with the rom. I have upgraded to the newer version but felt it was too slow and benchmarked a lot less that the original one. Unfortunatly the original version does not have the youtube feature working. I still think that the videos look a lot better and the UI is much nicer with the HTC version. I have tried the TP2 version but it doesn't work either. Do I need anything else installed apart from the HTC framework and the certs do you think? It all installs fine and shows the videos but when I try to play them it says that the videos cannot be played error. Again, thanks for replying.
elder T said:
In CorePlayer theres YouTube supports, just change the setting to hight quality and you are set to go.
Click to expand...
Click to collapse
demonknight9 said:
Hi, thanks for the reply. I know that, the version that I have of core player is the original one that comes with the rom. I have upgraded to the newer version but felt it was too slow and benchmarked a lot less that the original one. Unfortunatly the original version does not have the youtube feature working. I still think that the videos look a lot better and the UI is much nicer with the HTC version. I have tried the TP2 version but it doesn't work either. Do I need anything else installed apart from the HTC framework and the certs do you think? It all installs fine and shows the videos but when I try to play them it says that the videos cannot be played error. Again, thanks for replying.
Click to expand...
Click to collapse
I use youtubeplay
http://tinyurl.com/youtubeplay
Unfortunately it seems that Youtube has just banned it because it appears a Error messaje: Failed to play: -3
Best Regards
Thanks, you're right. It looks like it's been banned. Don't work for me.
Thanks all the same
Pere said:
I use youtubeplay
http://tinyurl.com/youtubeplay
Unfortunately it seems that Youtube has just banned it because it appears a Error messaje: Failed to play: -3
Best Regards
Click to expand...
Click to collapse
demonknight9 said:
Thanks, you're right. It looks like it's been banned. Don't work for me.
Thanks all the same
Click to expand...
Click to collapse
trying this is works fine on my TG01
mirolg said:
trying this is works fine on my TG01
Click to expand...
Click to collapse
I don't know what to say but omg. How did you get this ?!! I've been looking everywhere for a youtube app after trying MVU Mobile Browser and youtubeplayer. I looked on youtube and kept saying your device isn't supported (TG01). Google didn't return any results for any youtube native apps for windows mobile.
I've installed it and honestly didn't expect it to work, but it does! The only problem is though is that since youtube have updated their mobile website, the quality is much better than what is streamed on the native apps, such as the one I've just downloaded from your post. There doesn't appear to be a HQ button on the app so I guess it's streaming from 3GP.
Anyway, just wanted to say thanks for posting this. Hopefully, it will be a long while yet before Windows Mobile is actually abandoned, even though various sources state that development has come to an end for the platform.
BTW, Youtubeplayer doesn't work for me either, hence why I started to use MVU Mobile Browser as my youtube FLV downloader - playback still doesn't seem to work in coreplayer
Tozzy2 said:
I......BTW, Youtubeplayer doesn't work for me either, hence why I started to use MVU Mobile Browser as my youtube FLV downloader - playback still doesn't seem to work in coreplayer
Click to expand...
Click to collapse
Officially confirmed from COREPLAYER that Google has changed anything on Youtube and after that, COREPLAYER can't play Youtube videos. They say that next Coreplayer release will fix it (paying?? )
http://forum.corecodec.com/viewtopic.php?f=4&t=2746&p=11146&hilit=youtube+fails#p11146
I've downloaded the last official Youtube app for WM
Only avilable from the phone: http://m.youtube.com/app , and I also think that quality image has been improved, but not for all the videos (I can't understand why...). Besides, looks great on our big screen!!
So, I've just deleted youtubeplay from my device and perhaps Coreplayer will be the next, as I prefer TCPMP
(On the other hand if you have your own videos on Youtube, you can watch them easily with the new app. Not possible with Youtubeplay)
demonknight9 said:
I have looked on these and other forums for a working cab of the htc youtube from the touch hd or the blackstone that works on the TG01 but haven't manage to find a working one. I installed the latest certs and htc framework but still cannot play video. It a shame as the quality of the videos is really good. I remember when I had my blackstone the quality on the wvga screen was fab on the tg01 is got to be smoother and better hey?
If someone has ported this can you be so kind to point me in the right direction?
Thanks in advance guys
Click to expand...
Click to collapse
repliesrseem to be a bit of topic. use a htc branded rom, you can find many on this forum, then you have youtube htc player. still i strongly recommend using coreplayer. btw i have the latest version so youtube works fine.
olyloh6696 said:
repliesrseem to be a bit of topic. use a htc branded rom, you can find many on this forum, then you have youtube htc player. still i strongly recommend using coreplayer. btw i have the latest version so youtube works fine.
Click to expand...
Click to collapse
I have COREPLAYER 1.3.6 build 7427 and Youtube doesn't work. Which one do you have? TNKS
Pere: I like your avatar
btw i have the latest version so youtube works fine.
Click to expand...
Click to collapse
Can you please confirm which version you have. I'm thinking of buying coreplayer latest version but problem is I don't know which one to get because there is smartphone and pocketpc but smartphone says nontouchscreen! Which one did you choose?
Thanks, and does youtube work on the lastest version? Cheers
P.S. I can't believe we have to pay to upgrade coreplayer!! Even though it comes free with the phone. I have a good mind not to bother to be honest because I'd rather support the developers here than let coreplayer have my money. Problem is though, it seems google keep changing the way video is streamed on their servers all the time, causing playback issues with our software.
Pere said:
I have COREPLAYER 1.3.6 build 7427 and Youtube doesn't work. Which one do you have? TNKS
Click to expand...
Click to collapse
oh no! i have the same version. my youtube no longer works! why? it was working before. perhaps a new version and developer cannot afford to lisence the old version. however i am on holiday atm maybe the servers could be a problem? personally i think its selfish if you have to upgrade for a new version to get youtube!
Tozzy2 said:
Pere: I like your avatar
Click to expand...
Click to collapse
Nice my office-in-the-pocket isn't it?
olyloh6696 said:
oh no! i have the same version. my youtube no longer works! why? ......
Click to expand...
Click to collapse
Read my link to COREPLAYER forum....
I'm afraid that all that has been a Google strategy because it coincide in time with the launching of the new Youtube mobile....

Video playback issues

Hello there!
I've been searching the forums (mainly this one) and wasn't able to find a proper answer, so here I go:
I am REALLY happy with this phablet, being the Mate 7 my 5tht android phone, but I've never had any video playback problems: When I try to play a 720p mp4 file, it freezes at 1:00 (5 seconds more or less) or it stops and the system shows a popup: "Cannot play this video".
I've tried MX Player (HW and SW decoding), VLC and VLC beta, stock video player and MoboPlayer. Every one of them behaves the same way.
Also tried lower resolution files, and 360p aren't a problem for them: It plays them flawlessly. Played them from SD card and internal storage.
Btw, Youtube plays 1080p videos without a problem, and I usually watch short Twitch.tv sessions at highest resolution.
I don't know what else I can do, and I am seriously thinking about returning the unit, since it's one of my main uses (and that's why I just LOVE this screen).
Any help is appreciated and, also, any question regarding this problem.
[EDIT]
Btw, I am on 5.1.1 with EMUI 3.1 (build B324), unrooted.
Have you tried a factory reset? This would mostly fix issued like this. I'm running the same version of Android on the mt7-tl10 gold version and have never had an issue with this. In fact I'm currently happily re-watching Star Wars episodes 1 to 6 in 720p.
It sounds like the videos are being corrupted (correct me if I'm wrong), because that's exactly what happens when I try to play a video which torrent hasn't finished downloading.
Good luck!
Scruffykid said:
Have you tried a factory reset? This would mostly fix issued like this. I'm running the same version of Android on the mt7-tl10 gold version and have never had an issue with this. In fact I'm currently happily re-watching Star Wars episodes 1 to 6 in 720p.
It sounds like the videos are being corrupted (correct me if I'm wrong), because that's exactly what happens when I try to play a video which torrent hasn't finished downloading.
Good luck!
Click to expand...
Click to collapse
Thanks for your reply.
Today I've discovered my SD card was having read issues, and even when I formatted it, it had issues with anything beyond 20MB, regardless being video or audio. Also, when i copied anything from the SD to the main memory, it kept having the same problems: mp3 suddenly stopped and videos couldn't be played.
So I extracted the SD, did a factory reset, and it looks like it's working flawlessly (fingers crossed).
So far, so good.
EQLucky said:
Thanks for your reply.
Today I've discovered my SD card was having read issues, and even when I formatted it, it had issues with anything beyond 20MB, regardless being video or audio. Also, when i copied anything from the SD to the main memory, it kept having the same problems: mp3 suddenly stopped and videos couldn't be played.
So I extracted the SD, did a factory reset, and it looks like it's working flawlessly (fingers crossed).
So far, so good.
Click to expand...
Click to collapse
I'm glad I could be of some help!
I had the same issue with a previous device of mine, though the culprit had been a cheap and nasty MSD card I bought on vacation to squeeze extra photos in. I find that investing in proper storage (and taking the punch cost-wise) can go a long way, whether it be for your phone, PC, laptop or whatever.
Cheers! :highfive:

Categories

Resources