I have a Parrot Minikit device which sets up voice dialing by receiving the contacts details via bluetooth. I'm using a WM6 rom from TNT on my KJAM, but can't see anything in the send option which would use bluetooth. Any help welcomed please, I've searched around but couldn't find anything useful.
Thanks
EDIT: Found it under the "beam" area. I thought this was only for IR, but the bluetooth device showed up after a few second. All done now.
Related
Good Day to ALL!
I always read in the topics about bluetooth widcomm stacks against ms stacks, and the primary concern is HEADSET/HANDSFREE profiles. Well thats a vey nice function to have IF and WHEN perfected.
Right now, I have the standard bluetooth stack the came with my XDA 2. And I do not have a bluetooth headset or earpiece, my pimary bluetooth concern is SENDING and RECEIVING files over bluetooth, the SENDING PART seems to be OK and can transmit to other phone units (nokia especially but not SonyEricsson). BUT i cannnot receive files from any of these devices.
NOW, if I install the WIDCOMM stack that is available here and can be successfully installed, WILL this allow me to SEND and RECEIVE files to any device via bluetooth?
Thanks, I dont want to install yet coz there might be others out there who already know and I will learn from them and save me the time and effort.
THANKS.
I installed Widcomm 1.4.1 build 58on my 1.60WWE XDAII and I am able to exchange files between both Nokia and SE phones (I've only tried this with smartphones). When using the Widcomm and the MS bluetooth stack you should remember the following:
1. Don't turn both of them on at the same time.
2. BT headset only works with MS Stack
BLUETOOTH - SENDING
I CAN SEND AND RECIEVE AND SEND FILES TO OTHER DEVICES AND PHONES, BUT I CAN NEVER FIND OUT WHO THE SENDER IS WHEN RECIEVING FILES FROM SOMEONE... ON ANY PHONE OR LAPTOP WHEN YOU GET A FILE THROUGH BLUETOOTH IT ASKS DO YOU WANT TO RECIEVE THE FIEL FROM USER "XYZ", WHERE AS ON THE XDAII IT JUST ASKS DO YOU WANT TO RECIEVE THE FILE,,
IS THERE A SOFTWARE OR AN UPGRADE WHERE I CAN FIND OUT WHO THE SENDER IS WHEN RECIEVING BLUETOOTH????
ANYONE HELP ME PLEASE
Re: BLUETOOTH - SENDING
HEX said:
I CAN SEND AND RECIEVE AND SEND FILES TO OTHER DEVICES AND PHONES, BUT I CAN NEVER FIND OUT WHO THE SENDER IS WHEN RECIEVING FILES FROM SOMEONE... ON ANY PHONE OR LAPTOP WHEN YOU GET A FILE THROUGH BLUETOOTH IT ASKS DO YOU WANT TO RECIEVE THE FIEL FROM USER "XYZ", WHERE AS ON THE XDAII IT JUST ASKS DO YOU WANT TO RECIEVE THE FILE,,
IS THERE A SOFTWARE OR AN UPGRADE WHERE I CAN FIND OUT WHO THE SENDER IS WHEN RECIEVING BLUETOOTH????
ANYONE HELP ME PLEASE
Click to expand...
Click to collapse
When such message appears, try to beam smth via bluetooth. The first device appeared will be the sender of the file
chameleon said:
Right now, I have the standard bluetooth stack the came with my XDA 2. And I do not have a bluetooth headset or earpiece, my pimary bluetooth concern is SENDING and RECEIVING files over bluetooth, the SENDING PART seems to be OK and can transmit to other phone units (nokia especially but not SonyEricsson). BUT i cannnot receive files from any of these devices.
Click to expand...
Click to collapse
To receive a file via bluetooth you need to select "Discoverable" mode in bluetooth settings (start-settings-connections-bluetooth). Then, make sure your "beam reception" is checked (enabled) [start-settings-connection-beam-Receive all beams]. Now you can receive any files!
RTFM
Hi, guys. I'm having a problem with connecting to my Harman/Kardon GPS-810 portable navigation device. I had trouble prior to hacking my phone with WM6, but now when I attempt to connect, no audio is transmitted. At first, I thought it was just a problem with Nitro's bluetooth stack, but I've since replaced his ROM with Gnat's 6.1, and I'm having the same problem. The GPS-810, by the way, is based on Windows CE, so you wouldn't think there would be a problem. Has anyone else experienced something similar with a GPS device? My phone connects fine with my Motorola headset....
Daryl
Yes, I have the same problem with my Tornado/Gnat WM6.1. I can send files via bluetooth without any problem, but I can't receive anything! Others see my device name, but it fails to send something to my device.
Anyone has any suggestions?
Oh, this is a different problem ... I'm connecting my GPS to MY PHONE. It downloads my phonebook and call history, but when it connects with a call, it refuses to transmit any sound to its speaker. It worked with the old WM5 (it was flaky, though).
Daryl
Has anyone else experienced this problem?
Daryl
just check Receive incoming beams in Settings->Connections
Thanks for the suggestion, but that did not work. I had figured that that was for infra-red connections, anyway. I had tried calling my voicemail, though, and after a brief moment, the audio was transferred to my GPS, but when I called another number, it didn't transfer at all, and this time, there was no audio in the phone, either. Strange.
Daryl
Does ANYONE have a solution to my problem?
Daryl
I am using the HBH-DS980 bluetooth headset with my Nokia 6300 phone. I desperately need on the following questions,
1. After pairing and connecting, the contacts lists shows up as empty in the headset. How can I enable the bluetooth headset to read my phone's contacts?
2. When I receive a call the caller ID only shows the number of the caller and not his/her name as stored in the contacts. How can I fix this?
3. The auto-connect feature doesnt seem to work well. After connection, if I take my phone away from range for a while and then come back the re-connection does not happen automatically after any amount of time. I have set my phone to auto-connect with Bluetooth headset without confirmation. Still it does not work. How can I fix this.
Please help.
On this site people talk mostly about Windows Mobile phones made by HTC and AFAIK this is not the case with the Nokia 6300... (I could be wrong and this wouldn't be the first time).
I suggest you post your questions at Nokia Discussions or Esato.
Hey folks,
I have a couple of questions regarding the bluetooth hands free profile and Caller ID and Contacts.
First issue: I use a Garmin Nuvi 760 as a speakerphone in my car via the hands free bluetooth profile. The 760 can't access the recent calls on my HTC Polaris (Touch Cruise) running the official WM 6.1 ROM...it just says, "no data available" when I try to access it. My old phone (T-Mobile MDA / HTC Wizard with the official WM 5 ROM) worked fine. The Wizard happily sent my recent call data to the GPS. If I remember correctly, the Wizard would prompt me the first time the GPS tried to access the call data, and then it just worked after that until I deleted the bluetooth device pairing. When I receive a call the Wizard also sent the name from my contacts to the Caller ID display on the 760, and my Polaris doesn't...it just sends the phone number of the incoming call.
Second issue: at home I use a XLink BT bluetooth hub to use my "land line" phones with my Polaris. It also uses the hands free bluetooth profile to connect to the phone and then emulates a "land line" for my other phones via my home telephone wiring. When I receive a call through the XLink I also don't get the caller name along with the Caller ID data...it just sends the phone number. I also have my girlfriend's 4 year old Motorola Razr v3 connected to the XLink hub and the contact name data comes through to the cordless "land line" handset just fine on the Razr.
I'm pretty sure these issues are connected, and I'm also pretty sure that there must be a setting somewhere on my Polaris to allow this to work, but so far I haven't been able to find it. Do any of you guys know of a setting or registry key that will allow me to enable this functionality? I'd really appreciate some advice.
Thanks!
Enable SAP Settings?
Hi
I think that this may be an issue to do with "SAP" or Remote SIM Access in bluetooth settings.
Cheers
andrew-in-woking
andrew-in-woking said:
Hi
I think that this may be an issue to do with "SAP" or Remote SIM Access in bluetooth settings.
Cheers
andrew-in-woking
Click to expand...
Click to collapse
Thank you for the reply. Unfortunately Remote SIM Access is already on...I swear I've tried every setting I could find to try to figure this out.
Yeah, something is definitely just turned off somewhere (probably in the registry). I can dial from my phonebook from my nuvi via the handsfree bluetooth profile with my old phone (Wizard), but when I connect with my Polaris the option to dial from the phonebook is disabled (grayed out). Something is explicitly disabled somewhere...I just need to figure out which registry keys I need to change.
I'm really surprised I'm having such a hard time finding this info on the 'net.
Searched, but no results for this problem. I have Alltel, Touch Pro. Connect to bluetooth headset is fine. Calls ring in, talk, hang up all ok. Cannot initiate a voice command call either thru contacts nor by the phone number. Acts like it wants to, but then does nothing. Motorola H680, which lists the Alltel Touch Pro as compatable. If I manually dial using the phone touch screen, works ok.
Solution
Found a 3td party app that works for my setup.
http://www.jetwaremobile.com/index.htm
$14.95, 30 day free trial so I tested before buying.
They were not too clear on this, so if someone else uses it, you say "call" to bring up a contact, and "dial" to have phone dial a phone number you supply.
hth
You shouldn't need the add-on software. If you look at the advanced information on the BT screen for your headset, what profiles does it show and which ones are checked.
I'm using a Plantronics Discovery 655/665 (same headset) and don't have any issues with VC initiating.
TP Hands free is not an option for this or any headset with Alltel. At least, that is what HTC support said. Are you with Alltel and HTC got that wrong? Taking support for its word, didn't figure to go buy n try different headsets other than the ones we already own and know works on other phones. 'Tis why I posted here, hoping there might be a reg hack someone knew about. Then got HTC email reply saying Alltel did not activate that service for the TP. Alltel support has been zilch on this subject. btw, HTC email support has been pretty good, usually within a few hours during workdays.
Have a look at this thread; it includes supporting posts on how to get the most out of MS VoiceCommand ... including Bluetooth.
http://forum.xda-developers.com/showthread.php?t=520991
HTH,
Hi
I have problem with bluetooth headset. I have Nokia BH-108 bluetooth headset, when I call to somebody everything works fine, but somebody is calling to me headset does not work. Maybe somebody know the solution?
PerfAlbion said:
You shouldn't need the add-on software. If you look at the advanced information on the BT screen for your headset, what profiles does it show and which ones are checked.
Click to expand...
Click to collapse
Sorry to answer so late. Yes, BT profile was set to Hands Free.