Hi, guys. I'm having a problem with connecting to my Harman/Kardon GPS-810 portable navigation device. I had trouble prior to hacking my phone with WM6, but now when I attempt to connect, no audio is transmitted. At first, I thought it was just a problem with Nitro's bluetooth stack, but I've since replaced his ROM with Gnat's 6.1, and I'm having the same problem. The GPS-810, by the way, is based on Windows CE, so you wouldn't think there would be a problem. Has anyone else experienced something similar with a GPS device? My phone connects fine with my Motorola headset....
Daryl
Yes, I have the same problem with my Tornado/Gnat WM6.1. I can send files via bluetooth without any problem, but I can't receive anything! Others see my device name, but it fails to send something to my device.
Anyone has any suggestions?
Oh, this is a different problem ... I'm connecting my GPS to MY PHONE. It downloads my phonebook and call history, but when it connects with a call, it refuses to transmit any sound to its speaker. It worked with the old WM5 (it was flaky, though).
Daryl
Has anyone else experienced this problem?
Daryl
just check Receive incoming beams in Settings->Connections
Thanks for the suggestion, but that did not work. I had figured that that was for infra-red connections, anyway. I had tried calling my voicemail, though, and after a brief moment, the audio was transferred to my GPS, but when I called another number, it didn't transfer at all, and this time, there was no audio in the phone, either. Strange.
Daryl
Does ANYONE have a solution to my problem?
Daryl
Related
Hi,
I am using my HTC Touch Pro with an Opel Vectra built-in bluetooth carkit.
All functions, like browsing the address book and call registers, are working fine. However, at random times, my carkit reports no phone. When I then check my Touch Pro's bluetooth status, I see that it is has been disabled.
After manually re-enabling it, I can pair with my carkit for as long as it takes for bluetooth to turn itselves off again.
I've already tested with JETware, but that does not change anything. Also tried the universal broadcom bluetooth stack, but doesn't seem to work on the Touch Pro. HTC only comes with a standard answer that they don't support all carkits and headsets... Since the BT stack on the phone seems to crash, I don't think it's a carkit issue.
Anyone here with the same issue? And maybe a solution?
Thanks and regards!!
Start -> Settings -> Connections -> Bluetooth -> Timeout (tab). Turn off Visible mode set to "Never".
I think this must be your problem.
Hi Freco,
Thanks for your reply! This option is set. However it's not really the visibility that turns to invisible, but the whole bluetooth stack is being turned off completely. Need to fully re-enable it via Comm Manager.
Any other options? Does anyone know if there is a working broadcomm stack for the Touch Pro?
Regards!
Hi,
I have exactly the same problem with a Vauxhall kit, I have tried all sorts of things, but nothing seems to work
try:
start -> settings -> connections -> bluetooth
timeout tab
select 'never' from drop down box
Hi Brendo,
Unfortunately this doesn't solve the issue. Once paired, the connection even works without being visible. It's also not a fixed period of time before the disconnect takes place (can be within a minute, sometimes after half an hour). However, the whole bluetooth icons disappears from the top icon bar and comm manager shows it's turned off completely.
Hope somebody has any other ideas, because the only thing HTC can do is point to the carkit vendor :-(. Since all functionality is there when connected and the phone is turning off BT in some way, I really don't think this is caused by the carkit vendor. I should at least expect BT to stay enabled on the phone.
Thanks!
Yes, same here, BTW I have tried this in my Friends Saab, and the same problem.
same problem here with a Opel DVD90 buildin bluetooth carkit.
With other htc phones it always worked like a charm, but my mda vario IV continuously disconnects after a random time period and shuts down the complete stack.
Try this!
I have the same problem with my opel with original bluetooth-kit (2007). On the touch pro I changed the band and network from auto to GSM, as G3 reseption in this area is quit poor, especialy while driving. It helped for me, at least the last few days. I agree this has been an annoying problem.
I have tried to switch to "GSM only mode" in the past, but as far as I remember it does not completely solve the issue. However, I will give it another shot! Actually I can't figure out at what point it occurs... It can happen within a minute or after half an hour without using any funtion.
Does one of you know if there is a way to do some debugging on the Bluetooth stack?
And has anyone experience with other Windows Mobile 6.1 based phones in this combination (just curious if it's a WM issue or HTC only)?
Furthermore I did some tests with JetWare. You should be able to limit the number of synchronised items then (might be related to this issue). However, it looks like this configured limit is being totally ignored: when I limit my recent call list to 5 with JetWare, it still syncs about 25 items. Anyone tested with Jetware?
I have tried the GSM only mode, this didn't help either
I have now given up and got myself a Nokia E66, which works perfectly.
All contacts are pushed to car, no disconnects and AD2P works so my mp3 ringtones play through the car speakers! Sweet
Word of note, I had issues with N-Series phones, would connect ok, but contacts would not push.
I have the samen problem with my HTC Touch Pro and Saab.
bluetooth pairs just fine with my pioneer bluetooth enabled deck, but the problem iwth mine is once i receive a call sometimes no sound comes from the car, instead the earpiece is still on. but if i initiate the call first sound works just fine and earpiece on the phone is disabled, BUT once the call is ended bluetooth disconnects randomly and the phone takes a good 1-2min to reconnect. i absolutely hate the bluetooth on this phone!
ExTREmE99 said:
bluetooth pairs just fine with my pioneer bluetooth enabled deck, but the problem iwth mine is once i receive a call sometimes no sound comes from the car, instead the earpiece is still on. but if i initiate the call first sound works just fine and earpiece on the phone is disabled, BUT once the call is ended bluetooth disconnects randomly and the phone takes a good 1-2min to reconnect. i absolutely hate the bluetooth on this phone!
Click to expand...
Click to collapse
I am having the same problems you describe. Anyone got an suggestions???
I encountered the same problem; first with an opel udp carkit and next with the bluetooth interface software from homeseer.
It has something to do with phone signal loss.
With the opel carkit I noticed bluetooth automatically turns off when the phonesignal switched from 3g to gsm.
I also noticed that in my home, BT turns off whenever I have been in a room with no phone-signal reception.
try this thread, both registry change and attached cab file, reset. DOn't worry if the make visible to all option is unchecked.
http://forum.xda-developers.com/archive/index.php/t-314996.html
Hi if someone can help me it would be much appreciated. I just bought a Touch Pro and everything is working fine....except for one really annoying issue.
Whenever I connect my bluetooth to a headset, it shows connected but no sound is coming out. The sound is muted. when connected to my Audi, I see that the phone has bars (shows connected and I can dial the phone), but when I make a call no sound. Similarly on my SE HBH-DS970 headset. The A2DP works perfectly, but when I make a call nothing.....I've searched google and through XDA and no solution.
Can someone suggest a solution? I've soft/hard reset the device already. If I should change Radio ROM which one would someone suggest that's stable? Thanks
If no one else has this problem, can anyone at least suggest to me if this sounds like a Hardware or software issue? If hardware I will return it, but if software I will try to find a solution. Like I said the phone connects to BT, but I just can't get handsfree to work. File transfers and A2DP work. Thanks
Just flashed to UK ROM and still no help....I've read some people having the same problems over at the Diamond thread...I'm the only one answering my own thread here hahaha....if anyone can help I'd greatly appreciate it. Thanks.
Hi,
I occasionally had such an issue with my Parrot CK3100, but I did not get the time yet to investigate further. After the call was connected I did not hear anything, and I am not sure whether the other party could hear me.
On another day, the handsfree was working perfectly OK.
Cheers
Michael
Thanks for replying Michael....I'm at a loss and I tried all the suggestions posted. I hope it's a software issue...I'm going to buy a bluetooth headset tomorrow and see if that works. It's not the end of the world, but annoying since all my ppc, s60, BB, and UIQ phones prior to the TP have not had any such issues.
Do you think it's a software issue?
have you tried playing music?
Yes.....A2DP works perfectly....no problems whatsoever with file transfers either....I'm guessing either it's a software problem or the phone has a new bluetooth software that's not agreeing with my older SE headset, but the car is another issue. The Car is 2007 and I'm sure the Bluetooth software is not that old. I've tried Euro WWE and Asian WWE ROM and no go.....I'm going to try the Cingular ROM and see what happens.
Just another quick update....I tried 2 other different bluetooth headsets and still the same problem... for some reason the sound for handsfree will not come through...anyone know of registry hack possibly that will allow sound to come through?
May not be entirely related to your problem...
Mine is worst...whenever I have paired my Jabra or iTech BT headset, when the phone rings, 8/10 times the phone will auto pickup (and no I did not setup the phone to auto pickup) and the it will NOT connect to the bluetooth. Instead it will be just like an auto pickup and the sound will come thru the phone headset. This is driving me nuts!!!!
hi
i have a problem with my bluetooth, my instrument is vpa compact ii with wm 05. my insrument can find and send files to other insruments like pda and cell phones, but they can not find me, so i can't get files from others. i did not have this problem before, i can't point when it started but my be i dowloaded something that is blocking my bluetooth. what do i have to do? i don't want to go for HR. by the way, iv'e marked the possibility of let other instruments to find me so this is not the problem.
discoverable have to be on
auto receive incoming beams have to be on
it is on but still not working.
i have a problem with connecting by bluetooth nexus s with my mac ...
its says paired but not connected anyone experience this problem and does someone got a solution???
What are you expecting to see at this point? This message means that the devices are ready to communicate.
Now send some files from one to the other, or do some other task that requires them to talk, and they will connect.
All my bluetooth problems have been fixed since the 2.3.3 update.
Previously, it would connect to my BMW bluetooth, rings, but no sound when answered. now FIXED! I can hear the other person.
Connecting to blackberry bluetooth audio streamer, playing music there would be pauses/breakups evey few minutes. now FIXED! constant stream.
perfect!
Hi.
Have read around the forum a little, and haven't found much info in regard to the problem I'm having...
Am currently using the Opensensation Rom from 13/05/2012...
I am unable to connect bluetooth to my car's handsfree bluetooth audio... I tried connecting it to a blackberry and my laptop, and worked fine. However, it connected in a different way to normal. Normally, I've had it ask for pin number, and put in the default 0000. However, on the blackberry, it came up saying something along the lines of "device trying to connect, number 2837346". On the phone, it said "ensure the number on other phone is 2837346" or whatever.
When I connect to the bluetooth in car, it says "Couldn't pair with Ford Audio because of an incorrect PIN or passkey". But, as said, it doesn't ask me to enter the passkey...
So, any ideas of what the problem is, or how I can solve it? Tried changing the radio to see if that would help, but no difference...
Please help me get this sorted. Need the handsfree for phone, and only just got this phone... All other phones previously have worked.
Well, it appears that this is a problem with the ROM itself, as using another ROM (Revelation HD 6.6.4 XE), and it pairs fine with my car bluetooth...