Database Info

kaiser commmanager with 3G button?

anyone found a version of a commmanager cab with a disable 3G button that works for the kaiser? the ones i've found cause the wifi to no longer function...

im waiting on this as well. the only cab file i found could not be uninstalled so i figure i would wait.

flexte said:
im waiting on this as well. the only cab file i found could not be uninstalled so i figure i would wait.
Click to expand...
Click to collapse
post the cab, so anyone with WinCE cab manger can make it unistallble

here it is
this is the file and link to page.
http://forum.xda-developers.com/showthread.php?t=317982&highlight=Schaps+3G+switch+button
please make it uninstallable. thanks.

flexte said:
this is the file and link to page.
http://forum.xda-developers.com/showthread.php?t=317982&highlight=Schaps+3G+switch+button
please make it uninstallable. thanks.
Click to expand...
Click to collapse
I turned on the uninstallable switch but I have no way to test to be sure it works. I can only guarantee that it will show up in remove programs.

Thanks! ill wait until someone tests it though. anyone?

Nice App.
Hi,
I installed this app on my pre-production kaiser and it works fine, including uninstallation
It replaces the data connection icon in the comms manager so once installed it is slightly more difficult to disconnect from GPRS.
Apart from this.. it works fine if you want to disable 3g networking.
- Syrius

flexte said:
Thanks! ill wait until someone tests it though. anyone?
Click to expand...
Click to collapse
Chicken!

wpbear said:
Chicken!
Click to expand...
Click to collapse
hehehehe

this was said in the original forum
"Hi, I just found out I think that if I switch between GSM to Auto band using this comm Manager the phone will make GSM Band as priority over 3G band. If I switch to 3G Band only manually through Phone Setting, then switch to Auto then the Phone will make 3G as priority. Strange!"
i wonder if this is really the case. i did notice the other day that i had the band set to auto and there was an "E" icon showing. i then switched to 3g and an "H" was showing. i dont understand why it wouldn't have automatically been on "H" since auto was selected.
im going to give this file a shot just a quick back up first.

Also looking for this. I'm hoping someone can craft one with both the Data and the 3G buttons. The stock CM has a space for another button already. Someone's gotta be able to add the 3G button in, please!

3g button doesnt seem to work properly. i confirmed that the quote from my previous post was true.

Oh well. I read a post about someone missing all the little things XDA created for the Hermes. Here is another example and I am starting to wonder if I want the Tilt the 1st day or even few months. It will take a while for the Kaiser to get all the hacks working.

I'm one of those people! But, most tweaks are now in place, I just added this com manager and it's great to be able to throttle down the connection once again to save battery. I'm finding AE Button extremely useful in making these tweaks work like the Hermes.
This com manager works well and as mentioned, it would be better if the Data AND 3G keys could both be present since there is space. Since the Kaiser's Red button no longer breaks the connection when pressed and held, I've used AE Button to map a key, I double-press one to "close dialup connection" which breaks the connection. Works great!

I've tried this .cab on my TyTN II and I've uninstall it.
It doesn't disable your connection like NoData of MoDaCo does.

The one im using works fine, but doesn't have the Data button ( i dont really care) . It does have a beam button though which is obviously useless on the Kaiser, so i suppose that should be replaced with Data. My biggest hope is that someone can replace "Wireless Modem" with "Internet Sharing". I cant get the BT PAN in my laptop to connect when i use Wireless Modem, but it works great with the windows Internet Sharing app.

Unfortunately the installation does not work , shortly before finishing it said
that the program has not the necessary permission ...
any hints ?

make sure comm manager is not running in the backgrounmd

10B with 3G Comm Manager
Here is the one with fixed WLAN link button. Use it to see if it works.

Anyway to force 3g over edge?

My Fuze is always connected via EDGE, even though I live in a 3G serviced area (San Francisco Bay Area). I'm assuming the phone is choosing the stronger of the two signals by default, which is fine for voice, but EDGE is excruciatingly slow for streaming video. Is there a way to force the phone to use the 3G connection?

I dont know about the Fuze but on the european Touch Pro, all you have to do is
Start --> Settings--> "Phone" Icon -->"Band" Tab
Here you can choose your netwok type, by default it is set to auto, but you can force CDMA only if you want.

ice_coffee said:
I dont know about the Fuze but on the european Touch Pro, all you have to do is
Start --> Settings--> "Phone" Icon -->"Band" Tab
Here you can choose your netwok type, by default it is set to auto, but you can force CDMA only if you want.
Click to expand...
Click to collapse
Thank you for the help, but unfortunately there is no "Band" tab under Start --> Settings --> Phone on my Fuze.

Install the Advanced Config utility (you can find it pretty easily if you search the forums). Using this you should be able to restore the phone app's band page. This is a common way carriers prevent you from messing with settings they don't want you to. You're actually lucky, there are more tricky things to fix than this one .

I got my Fuze today and was wondering this exact question about the 3g network and your fix worked!
Thank you

clmbngbkng said:
I got my Fuze today and was wondering this exact question about the 3g network and your fix worked!
Thank you
Click to expand...
Click to collapse
What setting was changed to get this effect? Sorry ultimate PPC newb.

Once you install and have Advanced Config up and running you go to Phone tab, click on it and it opens a new tree if items for you to click on, scroll down some til you find "Show Band Page" click on it and then change it from "No (default)" to Yes. Click the left soft key that says "Done" and then it will ask you to restart your phone, click yes on that message and once its back up and running you should have access to the band tab in settings for the Phone.
If you have any other questions post here and I'll try to help out.

clmbngbkng said:
Once you install and have Advanced Config up and running you go to Phone tab, click on it and it opens a new tree if items for you to click on, scroll down some til you find "Show Band Page" click on it and then change it from "No (default)" to Yes. Click the left soft key that says "Done" and then it will ask you to restart your phone, click yes on that message and once its back up and running you should have access to the band tab in settings for the Phone.
If you have any other questions post here and I'll try to help out.
Click to expand...
Click to collapse
Thank you much kind sir.. What should I change the band to to get the desired effect??

Well.............?
norkoastal said:
Thank you much kind sir.. What should I change the band to to get the desired effect??[/QUOTE
Is there an answer to this question or not? How do I force 3G? There are 3 to choose from. 2 of them disable data connection. The other doesn't force 3G. I must be doing something wrong.
Click to expand...
Click to collapse

Check this thread & this post.

disable wifi on tilt

does anyone know how to permanently disable wifi on a at&t tilt 8925, or know where I can find out from. by permanently I mean remove or disable the wifi antena, or some kind of program to edit the connection manager and remove the wifi on off switch.

try to delete this registry with registry editor: (it will ruin your registry setting about wifi, so wifi is permanently disabled, as your request)
[HKEY_LOCAL_MACHINE\comm\TNETW1251]
and
[HKEY_LOCAL_MACHINE\comm\TNETW12511]
and
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\WLAN]
and for the comm manager: make sure you dont have any text written "WLAN" in here:
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\5]
@="DataDisconnection"
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\4]
@="3G"
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\3]
@="WLAN" -> remove this, change to something else (ActiveSync, etc)
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\2]
@="Bluetooth"
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\1]
@="Phone"
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\0]
@="FlightMode"
there, you wont have any wifi in comm manager and available wifi,.

which editor should I use, and do u also know how I could delete bubble breaker and solatire

This worked somewhat for my somewhat bricked 8525 with WM6.1 (couldn't get radio working). There wasn't a "TNETW1251" but something similar "TNET..." Only problem was I set it up while WiFi was enabled so now it searches for WiFi and there seems to be no way to disable it.
I will eventually put those Registry items back so I can see what the deal is. Does this work similarly on an HTC Fuze? Whether I can disable WiFi will be a determining factor in whether I will buy the Fuze.

diskojoe said:
This worked somewhat for my somewhat bricked 8525 with WM6.1 (couldn't get radio working). There wasn't a "TNETW1251" but something similar "TNET..." Only problem was I set it up while WiFi was enabled so now it searches for WiFi and there seems to be no way to disable it.
I will eventually put those Registry items back so I can see what the deal is. Does this work similarly on an HTC Fuze? Whether I can disable WiFi will be a determining factor in whether I will buy the Fuze.
Click to expand...
Click to collapse
I don' mean to pry and if it is none of my business just say so, but why go to those extremes when you can just " shut it off" in your comm manager.
Two login names Joe? or two separate people coincidently named Joe.

I am a man with little self control, who is relying on the strength of God and His guidance for wiser choices. I love my 8525, but I "done it in," so I'm thinking of upgrading to something newer that has the same features. None of the other phones had the QWERTY board like I wanted. I use a program called Pocket eSword and have a ton of notes and highlighting in it. I may just continue using my 8525 as a PDA and get something simpler, but I also like the idea of an all-in-one. I also like using Word and Excel. Any insight would be appreciated.

Has anybody tested this?

double post sorry

diskojoe said:
Has anybody tested this?
Click to expand...
Click to collapse
Yes i tried it and it does as it says ,wifi is blocked, i was fed up with my tytn switching wifi on for no reason and draining my battery all the time. Since i removed the wireless reg settings i have no wifi and no power drain. So i am happy. Thanks for the info
denco7 said:
I don' mean to pry and if it is none of my business just say so, but why go to those extremes when you can just " shut it off" in your comm manager.
Two login names Joe? or two separate people coincidently named Joe.
Click to expand...
Click to collapse
maybe he gives it to his employeess and doesnt want them connecting to wifi, or maybe like me the rom just wants to connect to wifi all the time.

[Tweak] ULTIMATE!! aGPS cab (GOOGLE or NOKIA server!) Generic UPDATE 06/08/10!

UPDATED TO USE GOOGLE SUPL 3/30/10!
What people are saying:
patcat007 said:
I must say this is one of the most useful cabs floating around. The GPS locks in about 5 secs. Its almost as if Big Brother is watching you. Thank you Fone Fanatic your cab was of great help.
Click to expand...
Click to collapse
allthatinny said:
after installing this my locks were almost instantly, seems like this is the cure for all our GPS problem...
Click to expand...
Click to collapse
​
Here is my own aGPS settings cab.
Created originally for my Raphael, but works perfectly fine on my Rhodium (Touch Pro 2) and should work on any other WM6.1/5 aGPS capable device.
This replaces the default aGPS server to the one GOOGLE aGPS server. This has been found to dramaticaly increase GPS lock speed! After applying this cab i get cold Locks in about 20 seconds and warm gps lock in under 15!
Don't be scared to try it out as its easy to revert to defualt settings!
Try it out and report your results!
I created this so I can just add it to my UC list making life easier in setting up a rom after flashing and thought others might benefit from it.
Feel free to comment, hate, or appreciate
If there is a demand, i can easily delete the At&t bit and so its more generic, also if you want this adapted for your provider, reply with your APN and GPRSConnection and i can create the cab for you
It sets the following in the [HKLM\Software\HTC\SUPL aGPS\] Registry
DynamicURL to supl.google.com (searched on the internet and many people claim much faster locks than the default h-slp.mnc410.mcc310.pub.3gppnetwork.org)
EnableAGPS 1 (so aGPS is enabled in settings)
EnableLocInfo 0 Unchecks "Enable AGPS loation information to network services. Operator can get your location information." From the Privacy tab of the AGPS Settings
ServerIP to 74.125.113.192
ServerURL and TLSHostName to supl.google.com
Decided to just make a Generic one that sets the nokia aGPS server, enables aGPS, disables Location info and no network configuration.
[UPDATE: The cabs are the SAME as the previous ones titled FF ATT/Fido/Generic Nokia aGPS Settings, I just changed Nokia to Ultimate because I was getting PMs on how to install them on nokia devices]
update 3/30/10: updated the cabs to use the google supl which is provided on android devices!
There is no need for carrier specific settings, they should automaticly fill in from info already on your device. If you go to HKLM\Software\HTC\SUPL aGPS\ and APN, Network, and GPRSConnection are empty after you've installed the cab and soft reseted, then post here and i will make carrier specific cabs.
[06/08/2010] Re-attached the supl.nokia cab as requested. Please test and compare to the newly attached "FF Ultimate aGPS Tweak_supl.google_Generic.cab" and report your results.
When i ping supl.nokia.com requests time out leading me to believe nokia's servers are down, or they changed them to something else.
[size=+2]With FF Ultimate aGPS Tweak_suple.google_Generic.cab i get a lock in under 15seconds, even after hard reset!![/size]
​

does this speed up gps pick up time?

breezethrusd said:
does this speed up gps pick up time?
Click to expand...
Click to collapse
fone_fanatic said:
DynamicURL to supl.nokia.com (searched on the internet and many people claim much faster locks than the default h-slp.mnc410.mcc310.pub.3gppnetwork.org)
Click to expand...
Click to collapse
..........

fone_fanatic said:
Here is my own aGPS settings cab. Which does the following.
I created this so I can just add it to my UC list making life easier in setting up a rom after flashing and thought others might benefit from it.
Feel free to comment, hate, or appreciate
If there is a demand, i can easily delete the At&t bit and so its more generic, also if you want this adapted for your provider, reply with your APN and GPRSConnection and i can create the cab for you
It sets the following in the [HKLM\Software\HTC\SUPL aGPS\] Registry
APN to wap.cingular
DynamicURL to supl.nokia.com (searched on the internet and many people claim much faster locks than the default h-slp.mnc410.mcc310.pub.3gppnetwork.org)
EnableAGPS 1 (so aGPS is enabled in settings)
EnableLocInfo 0 Unchecks "Enable AGPS loation information to network services. Operator can get your location information." From the Privacy tab of the AGPS Settings
GPRSConnection and Network to MEdia Net
ServerIP to 66.35.236.25
ServerURL and TLSHostName to supl.nokia.com
Click to expand...
Click to collapse
I would really appreciate a cab for Fido.
APN internet.fido.ca
All I put for internconnection is
Name fido
apn internet.fido.ca
user fido
pass fido
Let me know if you require anything else.

finch said:
I would really appreciate a cab for Fido.
APN internet.fido.ca
All I put for internconnection is
Name fido
apn internet.fido.ca
user fido
pass fido
Let me know if you require anything else.
Click to expand...
Click to collapse
check first post, and don't know if it'll make a difference or not but set it to the connection name to Fido, capital F

Great work!
Pure awesomeness!
If you could, please make Rogers or unbranded version of this greatness!

Xaaran said:
Pure awesomeness!
If you could, please make Rogers or unbranded version of this greatness!
Click to expand...
Click to collapse
Generic/unbranded version added to first post!

fone_fanatic said:
check first post, and don't know if it'll make a difference or not but set it to the connection name to Fido, capital F
Click to expand...
Click to collapse
Thanks a million!

after installing this my locks were almost instantly, seems like this is the cure for all our GPS problem, i also got FusionGPS installed to get a lock after i soft reset my phone and i get looks btw 20-30 sec out door and 30-80 sec indoor

finch said:
I would really appreciate a cab for Fido.
APN internet.fido.ca
All I put for internconnection is
Name fido
apn internet.fido.ca
user fido
pass fido
Let me know if you require anything else.
Click to expand...
Click to collapse
Finch, did you try the cab? what's the feedback on it working with Fido?
Now only thing left is to find a way to trick the phone into thinking it's on Roger's instead of Fido and get rid of that roaming problem.
..

tjex said:
Finch, did you try the cab? what's the feedback on it working with Fido?
Now only thing left is to find a way to trick the phone into thinking it's on Roger's instead of Fido and get rid of that roaming problem.
..
Click to expand...
Click to collapse
If you don't want to try the fido cab, go ahead and try the Generic cab which doesn't touch any of the apn/data settings.
Report back with your results

Auto Connect?
Hi, I have installed the generic cab. But one question: do I have to establish the data connection by myself manually? I mean, applications like explorer or email do connect automatically once they need it. Apparently AGPS doesn't.
Further, as far as I understand, the generic cab should work everywhere if not limited by your carrier, right? I wonder if it works in Singapore though. Any ideas?

tjex said:
Finch, did you try the cab? what's the feedback on it working with Fido?
Now only thing left is to find a way to trick the phone into thinking it's on Roger's instead of Fido and get rid of that roaming problem.
..
Click to expand...
Click to collapse
Fido seems to work well. Initial fix can be slow but pretty damn fast afterwards.

Thank you very very much
enables aGPS on my T8285 in USA

clausg said:
Hi, I have installed the generic cab. But one question: do I have to establish the data connection by myself manually? I mean, applications like explorer or email do connect automatically once they need it. Apparently AGPS doesn't.
Further, as far as I understand, the generic cab should work everywhere if not limited by your carrier, right? I wonder if it works in Singapore though. Any ideas?
Click to expand...
Click to collapse
Not 100% sure if it is supposed to activate the data connection or not. If it doesn't, just fire up internet explorer before you decide to use your GPS to have a data connection.
And the generic cab is without data settings, so yes it should work in singapore or with any carrier
Sir.B said:
Thank you very very much
enables aGPS on my T8285 in USA
Click to expand...
Click to collapse
Your welcome

I applied the Generic Cab of GPS settings to my Touch Pro using an Energy ROM Build 6.5 21864 and Radio 1.14.25.05. I must say this is one of the most useful cabs floating around. The GPS locks in about 5 secs. Its almost as if Big Brother is watching you. Thank you Fone Fanatic your cab was of great help.

patcat007 said:
I applied the Generic Cab of GPS settings to my Touch Pro using an Energy ROM Build 6.5 21864 and Radio 1.14.25.05. I must say this is one of the most useful cabs floating around. The GPS locks in about 5 secs. Its almost as if Big Brother is watching you. Thank you Fone Fanatic your cab was of great help.
Click to expand...
Click to collapse
your welcome
and about the big brother comment, thats why this cab does the following
EnableLocInfo 0 Unchecks "Enable AGPS loation information to network services. Operator can get your location information." From the Privacy tab of the AGPS Settings
Click to expand...
Click to collapse
so this doesn't let big brother follow, although, if he did want to he really could and we can't do anything about that
glad this helping people out as it did me!

So wait, we can use any of them on any carrier or....
Which one do i use for tmobile>?

I installed the generic one on my TP which is on T-Mobile UK.
It did not seem to get a quick lock when I had the data connection disabled.
I enabled the data connection and it seemed to get a quick lock.
So I take it that the generic one will not fire up your data connection itself, but if you get an operator specific one it can?
If so, could I have a version for T-Mobile UK please? I am not sure what the password is, these are the settings I can find on my phone:
APN: general.t-mobile.co.uk
User: T-mobile
Pass: ??? (Starred out)
Is there not maybe some way of taking this info from the phone or automating this process so you dont have to make unique versions of this app?
And what about QuickGPS, does this make it redundant?
Thanks

What about touch pro cdma? Should this work for CDMA? I see no APN key in registry. How could I make it work?
Thanks.

Data Connection Auto Disconnect SOLVED!

Couldnt see any other posts that 100% solved this so thought i'd post........
This app works 100% for disconnecting the Data connection after a user definable period of data innactivity.........
http://forum.xda-developers.com/showthread.php?t=478519
I'm very happy as this was one of my biggest compaints about the phone!
Karlos.

Oh awsome, will try it now, have to put my phone away for xmas

Oh no way?!!! lol

Please can you share your settings for this app.

All default, choosing Qualcomm MSM72xx as the radio chip!
Left all 2g/3g settings off as I dont like the idea of being out of signal every time it switches over, and then in the Data section just choose to Disconnect idle connections after 30sec, with screen on, and programs runnning.
HTH!

Is this different from the setting in Advanced Config?
BTW - my 500th post! HURRAY!

Which Advanced config mate?

Karlos G said:
Which Advanced config mate?
Click to expand...
Click to collapse
Here:
http://forum.xda-developers.com/showthread.php?t=418151

I've never used that mate, so dont know!

pedmond said:
Here:
http://forum.xda-developers.com/showthread.php?t=418151
Click to expand...
Click to collapse
Does this Advanced App work on the HD2?

Thanks man!
This is awesome

Shockwave Pyrotechnics said:
Does this Advanced App work on the HD2?
Click to expand...
Click to collapse
It does, with the exception of the TF3D settings.

pedmond said:
It does, with the exception of the TF3D settings.
Click to expand...
Click to collapse
To me, the setting of Advanced Config for autodisconnect data worked with Blackstone, but with Leo it's no use.

It also doesn't work on my german HD2, data connections in TF3D (Weather, Mail) doesn't close after choosen time settings in both tools

Rod65 said:
It also doesn't work on my german HD2, data connections in TF3D (Weather, Mail) doesn't close after choosen time settings in both tools
Click to expand...
Click to collapse
WM long life seems to work, following the setting mentioned by Karlos G:
"All default, choosing Qualcomm MSM72xx as the radio chip! Left all 2g/3g settings off as I dont like the idea of being out of signal every time it switches over, and then in the Data section just choose to Disconnect idle connections after 30sec, with screen on, and programs runnning."

Intermediate version on page 45 of the thread, more improved for HD2
http://forum.xda-developers.com/showthread.php?t=478519&page=45
GREAT pcs of software!!
dingolino

Tyrion84 said:
To me, the setting of Advanced Config for autodisconnect data worked with Blackstone, but with Leo it's no use.
Click to expand...
Click to collapse
Not if you use auto update for weather, stocks or anything...

Tyrion84 said:
WM long life seems to work, following the setting mentioned by Karlos G:
"All default, choosing Qualcomm MSM72xx as the radio chip! Left all 2g/3g settings off as I dont like the idea of being out of signal every time it switches over, and then in the Data section just choose to Disconnect idle connections after 30sec, with screen on, and programs runnning."
Click to expand...
Click to collapse
Sorry, but this doesn't work on my device.
Also, the tool gb-soft gprs-tweak or the advanced config tool won't cut the data connection.
I think we need a new solution

I think you must be doing something wrong my friend as it works for everyone else, the updated version linked to above also works 100%.

Karlos G said:
I think you must be doing something wrong my friend as it works for everyone else, the updated version linked to above also works 100%.
Click to expand...
Click to collapse
Ok, so please can anybody help me with the settings ?
My screenshots show my actual settings plus the proof, that data conection is still active after getting hourly weather update
Every other setting is discarded, and I have chosen Qualcom MSM7K, QSD8K (GSM)