i have a full configured tornado, running vjgrace wm6 english v3.7. everything works perfect.
so i would like to setup my second tornado exactly the same way.
is it possible to make an image of my tornado including everything to setup a clone to my second device?
i know there is 'sprite clone', but honestly 300$ is just to much...
any help is highly appreciated.
Sprite Backup. Worked on my two E650.
SPB Clone ... but never tested it.
maymaymay said:
Sprite Backup. Worked on my two E650.
Click to expand...
Click to collapse
this is just a backup. you will have to install the os and the applications manually.
osavioro said:
SPB Clone ... but never tested it.
Click to expand...
Click to collapse
yep, but 299$ is just to expensive!
i just checked, sprite backup will do the job. you have to flash the rom and afterwards sprite backup is fine.
thanks.
Related
Can I use a backup program to reinstall applications after a rom update. I have tested every rom that came out but manually reinstalled all the apps after rom update. Any help would be great.
Thanks ,
Victoria
That's not a good idea: if the registry structure has been changed, from the previous rom to the new one, when you restore your backup, it can really mess things up!
Thanks for the quick reply. its a pain to do the installs on my jasjar but its double with the O2 exec XDA as well. Best to do it the wright way
I use the Rom upgrade utility from Sprite and it does the job always. No issues yet. Follow the instructions to the letter though..
I use SpbBackup with great results, but like vmiguel said, you shouldn't restore backups between ROM flashes as it restores ALL settings and registry entries, and this aint a good idea unless on the same ROM.
U shld freshly install every app after a clean ROM upgrade as it would also speed up ur device.
i have a question.
All softwares work good for WM5 will work on WM6?
Thanks
lonelyboy2003 said:
i have a question.
All softwares work good for WM5 will work on WM6?
Thanks
Click to expand...
Click to collapse
That depends on the software. Most work well, others require WM6 support.
SPB BAckup... and it is in my folder....
try
is there a NORTON GHOST-like program for pocket pc ? a software that will allow me to create a total image of my sd card and rom so i can restore it later ? thanks
yes it does but only apps
yes it does but only apps no rom backup is the spb clone for ppc
I suppose any backup software could get it. I use HP backup to backup the whole data. I even could restore them after hard reset to continue using as before. So I suppose it should be like Ghost thing totally.
so how excatly do i backup my phone ?
Spbclone will do the card, but I don't think it will do the ROM
Incidently, whatever happened to the backup/restore function which was in the early Activesync software? Why did MS leave it out?
Edit
LOL. I never noticed the price - $299
yeah yeah
yeah the spbclone only do a file like backup (no rom backup) if you want a rom backup with the apps inside you will cook the rom
greetings
enjoy it
suppose i upgrade my OS from one version of WM5 to another newer version of WM5....will spb clone allow me to restore my settings and installed apps on the new OS ??
Lets say I have two G3 version, CID unlocked Wizards. Call them W1 and W2.
I installed WM6 (X-plorer 1.1) and all software I need on one of them (W1). Everything is fine.
W2 is still stock TMobile WM5 device.
1. If I make full SPB Backup image of W1, can I then take that image and install it on W2, making it WM6 device ? If not ....
2. Can I upgrade W2 to be WM6 device and then apply image from W1 ? If not ... what would you suggest.
Basically idea is to make copy of W1 and move it to W2. I dont want to install software and tweaks on both devices
Any suggestions ?
bogdatov said:
Lets say I have two G3 version, CID unlocked Wizards. Call them W1 and W2.
I installed WM6 (X-plorer 1.1) and all software I need on one of them (W1). Everything is fine.
W2 is still stock TMobile WM5 device.
1. If I make full SPB Backup image of W1, can I then take that image and install it on W2, making it WM6 device ? If not ....
2. Can I upgrade W2 to be WM6 device and then apply image from W1 ? If not ... what would you suggest.
Basically idea is to make copy of W1 and move it to W2. I dont want to install software and tweaks on both devices
Any suggestions ?
Click to expand...
Click to collapse
I would say, flashing the secound W2 and then restoring the backup of W1 would be the safer way. But for me no backup worked perfectly although it has been the same device with the same OS. Sometime active sync didn´t function anymore - the other time messaging was not able.
Give it a try. When you just flash W2 - you get WM6.
And when restoring is worse - you make a hardreset and install.
It´s hard work but it will work.
Btw - wait on Xplore 2.0 before startin!!
bogdatov said:
Lets say I have two G3 version, CID unlocked Wizards. Call them W1 and W2.
I installed WM6 (X-plorer 1.1) and all software I need on one of them (W1). Everything is fine.
W2 is still stock TMobile WM5 device.
1. If I make full SPB Backup image of W1, can I then take that image and install it on W2, making it WM6 device ? If not ....
2. Can I upgrade W2 to be WM6 device and then apply image from W1 ? If not ... what would you suggest.
Basically idea is to make copy of W1 and move it to W2. I dont want to install software and tweaks on both devices
Any suggestions ?
Click to expand...
Click to collapse
I have created a backup of my WM5 using SPB-Backup, then proceeded to load WM6, and ran the backup. Everything seemed to transfer over alright
envmyz said:
I have created a backup of my WM5 using SPB-Backup, then proceeded to load WM6, and ran the backup. Everything seemed to transfer over alright
Click to expand...
Click to collapse
So you initially had WM5 and SPB Backup image was for WM5, right ? Then you upgraded to WM6 and then run backup ...
1. did you end up having WM6 or WM5 ?
2. That was on the same device, right ?
envmyz said:
I have created a backup of my WM5 using SPB-Backup, then proceeded to load WM6, and ran the backup. Everything seemed to transfer over alright
Click to expand...
Click to collapse
I'm surprised (and question whether) this worked. WM5 and WM6 use different PIM databases. I did something similar the first time I moved to WM6 and found it completely hosed up where outlook couldn't find the database and I couldn't get sms or anything.
From what I've read, and my own experieince, you should not restore a full backup (like from spb backup) from one type of rom to another.
As for the OP question, spb backup (and similar) do not copy the actual rom. So to do this, you'd have to install XPlore 1.1 onto both, configure the one, then backup and restore onto the other. Even then, I'm not sure if thats a great idea, but it should work.
What version of Sprite Backup are you using ?
Did you get working scheduled backups with version 6.2.1 ?
Not me. I'm still in contact with Sprite's support.
Thanks for your feedback
Calico
I'm still using 5.1.0, Build 1447.
It's been working just fine with my 750.
Im using ver 6.1 and it works fine with my wm6.1 full edition.
Ok, i got a patch from Sprite. Now my version also works again.
I have been using Sprite backup for a long time and for the most part it works great.
I've had some problems since upgrading to WM6 though ... a lot of times I'd get "unexpected errors" and cannot backup at all, even right after a soft-reset.
I can, however, backup successfully if I initiate the backup from the PC instead of from the phone itself. The content is still backed up to the SD card on the phone, the only difference is I have to start the backup from the PC console.
Anybody experienced the same problem? At least the workaround works ...
Hi there,
I have another question today where I did not find any anwer to by searching the forum.
I am now about to give the Dr. Gonzo WM61 ROM a try. However in the unlikely case I do not like it I would like to go back to the original WM60 ROM provided by HTC.
As my current installation is heavily customized, is there any way to save the current installation and put it back if required? I mean with all settings, installed software etc.?
Something which I can easily do on a Windows PC by using software like Trueimage oder Ghost.
Is there a way to achieve this with Windows Mobile somehow?
Many thanks already for your thoughts.
Have a nice day
Andi
You can use Sprite Backup program but it is not recomanded to restore settings from one rom to another...
No problem with using sprite backup if you revert to your original rom.
Just reflash it. Install Sprite backup. Restore your backup and everything should be back as it was before flashing 6.1.
However if you keep 6.1, then you are better to re-install all your applications rather than restoring from the backup, unless you are carefull to only restore things that do not conflict with the new version.
Yes, heed the above advice. If you are WM6.0 and upgrading to 6.1 - make a complete and self-extracting backup using Sprite Backup. If you decide you don't like WM6.1, drop back to your original ROM and you can restore your backup to exactly how it was prior to your upgrade.
You can merge specific data from 6.0 to 6.1 however registry entries will not come over properly - which means all you can really restore are SMS and PIM.
EDIT: Double Post
AndiP said:
Hi there,
I have another question today where I did not find any anwer to by searching the forum.
I am now about to give the Dr. Gonzo WM61 ROM a try. However in the unlikely case I do not like it I would like to go back to the original WM60 ROM provided by HTC.
As my current installation is heavily customized, is there any way to save the current installation and put it back if required? I mean with all settings, installed software etc.?
Something which I can easily do on a Windows PC by using software like Trueimage oder Ghost.
Is there a way to achieve this with Windows Mobile somehow?
Many thanks already for your thoughts.
Have a nice day
Andi
Click to expand...
Click to collapse
This can be done by means enabling the r2sd function in the SPL. Unfortunately this is not really user friendly
Many thanks
Hello,
I am overwhelmed of that many answers and just say a big thank you to all who answered.
Will give SpriteBackup a serious try now, maybe also try the "user unfriendly" r2sd function afterwards.
Many many thanks for you, really making this forum a great platform!
BR
Andi