Hi folk,
I’m a really very-super-newbie (but I’m reading a lot of different posts… trying to fill the gap)
I wanna brick… ehm… ok, joking! I wanna flash my Kaiser with a Dutty's ROM.
I’ve got an ATT branded HTC 8900 (Tilt, isn’t it?).
Now my doubt is this:
Do I have to install a ROM specifically for ATT (Dutty's NewBuild Rom N0.6 +NETCF 3.5 AT&T, for example) with a specified RADIO (KAIS_Radinly_1.27.14.09_CustomRUU)
Or
Can I flash with the Duttys DualTouch V3 Final ? And in that case, which radio do i have to use? KAIS_Radinly_1.27.12.11_CustomRUU?
I saw in the RADIO section there are some limitations... regarding ATT.
Sorry, I know for you guys it’s just obviousness, but I didn’t find any post specifying which ROM I can and I can not use.
TNX!!!!!
Alex
eiem said:
Hi folk,
I’m a really very-super-newbie (but I’m reading a lot of different posts… trying to fill the gap)
I wanna brick… ehm… ok, joking! I wanna flash my Kaiser with a Dutty's ROM.
I’ve got an ATT branded HTC 8900 (Tilt, isn’t it?).
Now my doubt is this:
Do I have to install a ROM specifically for ATT (Dutty's NewBuild Rom N0.6 +NETCF 3.5 AT&T, for example) with a specified RADIO (KAIS_Radinly_1.27.14.09_CustomRUU)
Or
Can I flash with the Duttys DualTouch V3 Final ? And in that case, which radio do i have to use? KAIS_Radinly_1.27.12.11_CustomRUU?
I saw in the RADIO section there are some limitations... regarding ATT.
Sorry, I know for you guys it’s just obviousness, but I didn’t find any post specifying which ROM I can and I can not use.
TNX!!!!!
Alex
Click to expand...
Click to collapse
You can use DualTouch V3 Final. You have to make sure to apply the keyboard patch afterwards. As far as the radio is concerned, read the release document. It should tell you that.
before you do any of that you have to HardSPL your phone, then you can flash ANY rom to your phone and not just the specific ATT rom. There are certain radios that will work with Duttys v3 for you to be able to have your sound and camera working properly.
Related
Hey Guys,
I just upgraded to Dutty's v3 and am using a A&T TILT. I have no sound or camera. I have tried every radio on Dutty's cab collection. HELP!!!! I currently have 12.14.09.
PLEASE read the sticky on radios before posting this kind of question. The radio that you are using can only be used with the official AT&T rom, or the old dutty AT&T rom which is based on the official AT&T rom. Go look at the radio sticky and it will tell you all you need to know about what radio to use. I also have a tilt and it works great with the radio listed in my sig. That radio is available on Dutty's FTP under the radio folder.
As for trying other radios using cabs... radios are not cabs. They require a flash just like the V3 rom did.
Posts
bryangauvin said:
Hey Guys,
I just upgraded to Dutty's v3 and am using a A&T TILT. I have no sound or camera. I have tried every radio on Dutty's cab collection. HELP!!!! I currently have 12.14.09.
Click to expand...
Click to collapse
There's a thread already created for Dutty's ROM
All issues should be addressed there
Quick suggestion.....read, flash a radio that's compatible w/Dutty's Rom & then re-flash the Rom
I found that the 1.27.11.31 radio works great and fast camera with the ATT tilt, I have duttys daultouch v3 and that radio installed. You will also have to get the keyboard fix.
Why would you reflash after you install the radio, just wondering the reasoning behind that?
Have Tilt and flash'd. Now how do I get...
I flashed to Dutty' new V3 and .31 radio and keyboard. My question is what do I change in my setting to get gmail to work? I am missing MobiTv. Am I missing TouchFlo too?
jtsunami said:
I found that the 1.27.11.31 radio works great and fast camera with the ATT tilt, I have duttys daultouch v3 and that radio installed. You will also have to get the keyboard fix.
Click to expand...
Click to collapse
I looked for the keyboard fix but couldn't find it. Anyone know where it is?
NM found it
Hello, I have looked here for the official HTC TYTN II rom. I want the one that came with the device or the latest OFFICIAL rom (I don't think that the 6.1 verisions are official, but maybe I'm wrong). This link lists the official roms, but I am not sure which one is the original one??
http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
If I flash the Australia rom, will it work still here in the US? This looks like the latest official rom, but I really want the WWE version.
http://forum.xda-developers.com/showthread.php?t=346267
Also, I have a TILT and I am going to HardSPL and SIM unlock, which one do I do first?? I had the 8525 and I remember doing the SIM/CID unlock first I think?
Do I need to use this SuperCID and Security unlock as well if all I want to do is flash new roms and SIM unlock??
http://forum.xda-developers.com/showthread.php?t=361236
Oh, I almost forgot, why do some people post the .rar files and not the .exe, so much easier using .exe isn't it??
Thanks!!
tk123456789 said:
Hello, I have looked here for the official HTC TYTN II rom. I want the one that came with the device or the latest OFFICIAL rom (I don't think that the 6.1 verisions are official, but maybe I'm wrong). This link lists the official roms, but I am not sure which one is the original one??
http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
If I flash the Australia rom, will it work still here in the US? This looks like the latest official rom, but I really want the WWE version.
http://forum.xda-developers.com/showthread.php?t=346267
Also, I have a TILT and I am going to HardSPL and SIM unlock, which one do I do first?? I had the 8525 and I remember doing the SIM/CID unlock first I think?
Do I need to use this SuperCID and Security unlock as well if all I want to do is flash new roms and SIM unlock??
http://forum.xda-developers.com/showthread.php?t=361236
Oh, I almost forgot, why do some people post the .rar files and not the .exe, so much easier using .exe isn't it??
Thanks!!
Click to expand...
Click to collapse
The rom your phone came with if it is a tilt is one of the att ones on the site your first link leads to.
Hadspl and simunlock, don't matter which you do first just make sure you hardspl before trying to load a cooked rom from this site (and trust me it's worth going with a cooked rom over the att variants)
No supercid needed on the kaiser.
rar is much smaller then exe (rar is an archieve that has the files compressed)
Hello there! I just got off the phone with HTC tech support. They say they have no "official" release for WM6.1 and no date for a release either.
Also, they told me the newest "official" rom= 1.56.405.5
And radio= 1.27.12.11
Which is found here: http://rapidshare.com/files/5781641...dio_sign_22.45.88.07_1.27.12.11_Ship.rar.html
Anyone know how to get this in the .exe format?? I am a bit of a noob and I am used to using the .exe format to flash.
BTW manimore, I know what you are saying about the cooked roms, and I would definitely go with them over the AT&T crap; however, I like the look and reliability of the "official" HTC roms, like the one for the TYTN II.
Do we have any official HTC TYTN II roms besides the one above that the tech guys at HTC don't know about??
Thanks for the advice!
Manimore, I just reread your post. I was talking about official TYTN II roms, not anything for the Tilt.
What about this one?
1.83.631.4 (radio 1.27.15.32) Rogers Rom found here: http://forum.xda-developers.com/showthread.php?t=364789
Is this also a WWE official release for TYTN II?? What is Rogers??
tk123456789 said:
Is this also a WWE official release for TYTN II?? What is Rogers??
Click to expand...
Click to collapse
Rogers is the only GSM carrier in Canada. However, they don't currently offer the TyTN II, last time I checked (I was at a dealer yesterday, and looked on the website as I composed this post), so I'm not sure what to make of this.
Rogers is a weird beast, in some areas they are far ahead of the competition; We have name display (like a landline, you'll see the name of the caller as well as the number, when available), unlimited incoming plans (like Europe, but without raping the person calling you), nation-wide 3G (major markets), but in other areas they are way behind the times (handset selection is pathetic at best, account termination penalties of up to $900, customer service reps are all over the map, from don't-speak-English to telepathic, etc)
I have an unlocked AT&T Tilt, although I am a T-Mobile subscriber. Everything is working, except I hate the ROM that came with the phone when I bought it...I think it's a DCS rom. Anyway, I don't understand the whole thing about Radios... I would like to try Dutty's WM6.1 Hybrid v2 5.2.19716/5.2.19700 ROM, but I don't think I have the right version of the Radio? Here's what my device information screen says:
ROM version: DCSv1.7-WM6.1 WWE
ROM date: 02/19/08
Radio version: 1.70.OliNex
Protocol version: 25.65.30.04H
I have checked and HardSPL is installed, but I don't see anything about my radio being compatible. Can I use Dutty's Rom? HELP!!
TIA!
--FCOD
flyingcowofdoom said:
I have an unlocked AT&T Tilt, although I am a T-Mobile subscriber. Everything is working, except I hate the ROM that came with the phone when I bought it...I think it's a DCS rom. Anyway, I don't understand the whole thing about Radios... I would like to try Dutty's WM6.1 Hybrid v2 5.2.19716/5.2.19700 ROM, but I don't think I have the right version of the Radio? Here's what my device information screen says:
ROM version: DCSv1.7-WM6.1 WWE
ROM date: 02/19/08
Radio version: 1.70.OliNex
Protocol version: 25.65.30.04H
I have checked and HardSPL is installed, but I don't see anything about my radio being compatible. Can I use Dutty's Rom? HELP!!
TIA!
--FCOD
Click to expand...
Click to collapse
A radio is the driver to some of the hardware, camera/GPS/sound etc. Usually each ROM lists atleast one compatable radio. Some ROM's flash a radio with the ROM.
If you install a ROM and it doesn't work, just use the suggested radio (or search the ROM thread, there will be suggestions in there, I'm sure) and flash that in the same way you flashed the ROM.
Ta
Dave
I see. So the radio version listed in my device information is just the version of the radio "driver" software. Thank you for your help, I think I understand now.
--FCOD
flyingcowofdoom said:
I see. So the radio version listed in my device information is just the version of the radio "driver" software. Thank you for your help, I think I understand now.
--FCOD
Click to expand...
Click to collapse
I'd try a new radio, I've not heard of 1.7.OliNex before.
OliNex == OliPro + cmonex, but I think that's thier polaris radio, not a kaiser one, and I have never seen anyone with it on a kaiser.
I found one post on google, someone had it on a kaiser and was having problems.
Ta
Dave
DaveShaw said:
I'd try a new radio, I've not heard of 1.7.OliNex before.
OliNex == OliPro + cmonex, but I think that's thier polaris radio, not a kaiser one, and I have never seen anyone with it on a kaiser.
Click to expand...
Click to collapse
That radio is used to SIM / CID unlock your phone. You must use that radio to run Olipro's SIM / CID unlock process. It's a modified radio.
See here.
http://forum.xda-developers.com/showthread.php?t=375583
flyingcowofdoom said:
... I would like to try Dutty's WM6.1 Hybrid v2 5.2.19716/5.2.19700 ROM, but I don't think I have the right version of the Radio?
Click to expand...
Click to collapse
Dutty actually has two version of this ROM. One that works w/ different versions of radios. Check the Ultimate Radio Thread to see which one works with which one or check Dutty's thread concerning that specific ROM.
AllTheWay said:
That radio is used to SIM / CID unlock your phone. You must use that radio to run Olipro's SIM / CID unlock process. It's a modified radio.
Click to expand...
Click to collapse
Don't you usually have to flash another radio after the SIM/CID unlocking ones to make your phone work again? That's the case with Jocky's anyhow?
AllTheWay said:
Dutty actually has two version of this ROM. One that works w/ different versions of radios. Check the Ultimate Radio Thread to see which one works with which one or check Dutty's thread concerning that specific ROM.
Click to expand...
Click to collapse
Nothing like a bit of Shameless self promotion, eh?
Ta
Dave
I bought the phone unlocked like this about two months ago and it's been working (aside from some notification queue problems), so I guess not!
I think the Dutty rom includes a compatible radio, so I'm just gonna try flashing it and see what happens. I can always flash a new radio separately, right?
--FCOD
flyingcowofdoom said:
I bought the phone unlocked like this about two months ago and it's been working (aside from some notification queue problems), so I guess not!
I think the Dutty rom includes a compatible radio, so I'm just gonna try flashing it and see what happens. I can always flash a new radio separately, right?
--FCOD
Click to expand...
Click to collapse
Correct. It's just like flashing a ROM, except you don't lose any data, settings etc. etc.
Ta
Dave
flyingcowofdoom said:
I bought the phone unlocked like this about two months ago and it's been working (aside from some notification queue problems), so I guess not!
I think the Dutty rom includes a compatible radio, so I'm just gonna try flashing it and see what happens. I can always flash a new radio separately, right?
--FCOD
Click to expand...
Click to collapse
yes . . . . .
DaveShaw said:
Don't you usually have to flash another radio after the SIM/CID unlocking ones to make your phone work again? That's the case with Jocky's anyhow?
Nothing like a bit of Shameless self promotion, eh?
Ta
Dave
Click to expand...
Click to collapse
Yeah you do have to flash another Radio. But Some people don't. Why? I think you and I both know why.
Hello,
I have recently bought a AT&T Tilt, and would like to flash to the current Offcial HTC WM 6.1 ROM.
I have done alot of reading in the wiki here and various FAQ threads and what not. But i am still a bit confused with a few things.
I have read the ROM Flashing faq and Intro here:
http://forum.xda-developers.com/showthread.php?t=356895
And i understand all that.
I also undestand that i need the Key board fix from here:
http://forum.xda-developers.com/showthread.php?t=334911
But thats not hard.
I went here:
http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
I checked my device and the rom currently on it is the AT&T WM6.0 1.57.502.2 Original Shiped Rom.
I figured, being in Australia, i would need rom that had WWE as the country? So i downloaded the "RUU_Kaiser_HTC_WWE_3.28.405.0_radio_sign_25.83.40.02_1.65.16.25_Ship" rom. Is this an appropriete ROM for what i want?
BUT Its all this stuff about SPL's and what not that is confusing me.
My Tilt is SIM unlocked because i am using it on the Telstra network here in Australia. But im not sure if i have to change SPL's or not and if so, which spl i need and how to change it?
It would be greatly appreciated if someone was able to help me understand this SPL bussiness, because i really dont want to dive straight in a risk my device. I have done a fair bit of reading and i'm a fairly competent computer user so it won't take me long to learn.
Thanks in advance,
eMiller
you have to CID unlock it. this involves flashing the device with HardSPL then running a unlocker program. (this is what i know from Hermes, so i don't know if it is exactly the same on Tilt). It breaks the warranty though, so think first, then jump
by the way, you should try a cooked rom. in my experience, HTC roms are not that good, except for getting a stable radio. get the radio, then get a new OS rom, like hang.tuah or something.
warsng said:
you have to CID unlock it. this involves flashing the device with HardSPL then running a unlocker program.
Click to expand...
Click to collapse
Ok thanks. Can someone please recomend the best hardSPL and unlocker program for my needs. What do other people with Tilts recomend?
here you go
eMiller12 said:
Ok thanks. Can someone please recomend the best hardSPL and unlocker program for my needs. What do other people with Tilts recomend?
Click to expand...
Click to collapse
Try this one:
http://forum.xda-developers.com/showthread.php?t=334679
Look for the Zip file at the very bottom of the screen this hard spl will let you flash any rom (follow the instructions the spl gives you exactly and dont get nervous if it appears stiuck for a bit), just make sure you know which ROM you really want to flash at the end
.
Again same stuff.
Guys, when you gonna learn to read everything which is realted to your device when you want to do something?
Everything is in Wiki, everything you need is posted in ROM threads.
Come on GUYS!
read the f**** wiki. you need hardspl. its not that hard to figure out if your not an imbisel
@joel2009: That is a little harsh. Also, if you're going to call someone an imbecile, you should probably spell it right.
@eMiller12 (fellow noob): I don't know if I would bother with the HTC ROM, I just flashed it and I am finding a few really annoying bugs... Read Jocky's STICKY post about the HardSPLs to learn how to flash one. It really is quite simple--and it's unlikely that you're going to brick your device, so no worries.
Hey FireMedic, thanks for understanding.
I have read through the Wiki a fair bit, i was just unsure which versions of hardSPL etc where best for the [email protected] Tilt inparicular. But i will just use this one that vorostatz recomended if that is the best one for the tilt.
joel2009 said:
read the f**** wiki. you need hardspl. its not that hard to figure out if your not an imbisel
Click to expand...
Click to collapse
We are not all senior members. I can fully understand the guys wish not to turn his expensive device into a paperweight. Ease up eh?
search forums using google (at top right)
yeah, exactly... I was pretty scared to hardspl when I first started.
Hardspl 3.29 seems to be the best one, check my signature after you've read the hardspl sticky.
From what I understand, a rom flash might try to write a different spl which is obviously bad. hardspl prevents this.
If you ever need to, you can undo it. Kyphur explains in the hardspl sticky how to change them, by running a program named jumpspl 1.56 (on your device) with your sim and sd cards out and then flashing the spl normally.
Just make sure you follow directions for your device and try different roms.
Good luck and feel free to ask questions, even if some of the people here have heard them way too often.
Special ROMs for Australia
eMiller12 said:
I checked my device and the rom currently on it is the AT&T WM6.0 1.57.502.2 Original Shiped Rom.
I figured, being in Australia, i would need rom that had WWE as the country? So i downloaded the "RUU_Kaiser_HTC_WWE_3.28.405.0_radio_sign_25.83.40.02_1.65.16.25_Ship" rom. Is this an appropriete ROM for what i want?
Click to expand...
Click to collapse
Actually the WWE (World Wide English) one seems to be used more in Europe and this side of the world. For down-under, they use SEA South East Asia versions. There are issues with ROM compatibility in Australia specifically (at least in the WM 6.0 days) so if you want to know the best official WM 6.0 and 6.1 ROMs, short of searching for what setups Australian xda-dev forum members are using, you could look at the devices on sale in the shops. If you're wanting WM 6.1 just to have the latest and greatest, think again and have a look at the Windows Mobile 6 vs. Windows Mobile 6.1 thread.
***Edit*** Also note that there are two Australian specific ROMs in the WM 6.0 section of the Kaiser HTC ROM wiki
PREVIOUS COMMENTS:
Default Kaiser Rom???
Just got a Kaiser for ATT USA, i have it updated to the WM6.1 from ATT. But I'd really like to use on the cooked ROMs from this site. I've used a lot when I had a T-Mobile Wing.
Here is info on my phone
Rom Ver: 3.57.502.2 WWE
Radio: 1.65.21.18
What ROMs can I use?
NOTE: I'm still using T-Mobile and would like something that will work with the MMS and email...
NEW COMMENTS:
Maybe I should have worded that differently...
What I mean is that I am a new Kaiser owner, I do NOT know how to update the ROM, I took the suggestion at the end of my first post which was to read the Sticky's. I did that I followed different directions. HOWEVER, i can not get the hardSPL to update or install. So that is now my question. If that won't update, I won't be able to update my ROM???
Please do not make new threads when threads exist.
[Resources] Flashing Your First Kaiser Rom (For Noobs)
Follow guide any ?'s ask in the thread.
Closed.
You should put this post in the Kaiser General Question, cos more people will help you out then, i havent had my HTC TyTN II long and i followed the instructions from the stickies and everything worked, i installed hardspl without no problems whatsoever, so i dnt know whats going wrong with yours, normally when the phone starts up it should tell you which hardspl you have in red writing along with Radio version and Rom info, if you tried to install hardspl 3.29 and it worked then it will say that when the phone begins.