Related
1st off I DID use the search button.... 2nd HELPPP ME!!!
Waaah :'( I have a most intriguing problem I was running pdaviet 4.0.0.6 Touch for almost 2 weeks now without a single glitch.. the phone fell on my carpet and went to bootloader screen and eversince then it has never recovered I tried a hard reset it didn't work when I was pressing the send button it did nothing I did some forum searches and tried putting back the nvid RUU and it said that the update was succesfull and the progress bar on the phone moved accordingly but it went back to the bootloader screen ... then I tried pdaviet temp rom that was in the package still no go I can tell it works somehow because the USB lights up in the bottom left when I plug the usb cable and the progress bar that moves, but I'm getting desperate IPL and SPL info is in my sig...
same same... but i dropped mine before flashing the new PDAVIET touch rom.. still went fine..
now, it still flashes... RUU says its successful.. but PDA just reboots back to bootloader..
i can charge my phone fine in bootloader.. i can see the USB come on when i connect it to my computer.. other than that, can't do anything...
i've tried everything the past 2 days.. looks like i'll have to send it back to dopod.. will let u guys know what happens... probably something got damaged..
struck at bootloader
I tried WM6 (4.0.0.6 touch) from WM5 AKU 2.2 but it failed in between with some write message,which was bit strange as I didn't touch any key on laptop during that time and no program was being run at that time. (I am using VISTA Home premium). I got my phone into bootloader but it does not connect to my laptop...so cant upgrade back to AKU 2.2. In Windows Mobile Device Center, I cant see my device connected. So is it particular to Vista or my phone got bricked?
I am yet to try on Windows XP, which I have to arrange.
Please advise.
i had the sam problem.i installed this : try to install the 2.20 nvid rom
just go into bootloader mode-you dont need active sync connection and start the upgrade-search for 2.20 nvid rom download it and recover your device
charliess said:
i had the sam problem.i installed this : try to install the 2.20 nvid rom
just go into bootloader mode-you dont need active sync connection and start the upgrade-search for 2.20 nvid rom download it and recover your device
Click to expand...
Click to collapse
I tried the same but when I run ROMUpdateUtility_No_VenderID, I get a message 'Update Error, 260' which tells further that PDA is not connected to laptop., although it is very much connected. However LED on PDA does not blink as well.
When I plug in this phone to Wall adaptor, LED does show up.
'USB' appears at Bottom Left corner of PDA when connected to laptop and certainly its getting recognised by Vista as it starts installing Driver as soon as this is connected to laptop.
Please suggest.
I am stuck in the same situation, although I have a G3, running 2.20 on IPL & SPL
Working now
I tried on XP (I was trying on vista before)..I had to install Active Sync as it was not installed on that PC, then run RUU update for AKU 2.2 and update was successfull. Now will try Touch 4.0.0.6 again but this time on XP.
Hope this time I wont have any problems.
Hi All,
Out of the blue my HTC Vox stopped booting. I mean, it would load to the windows mobile screen and then stay there till eternity. Removing my memory card and SIM also did not help! I then tried the hard reset option.
Even after hard reset it sometimes boots(1 out of 15 times) and when it does...it hangs after 10 to 12 minutes. Still have not put my sim n memory card into the phone.
I tries flashing the ROM using the ARA 1.27 ROM. After it rebooted to the bootloader, the flash utility gave a connection error! It did not connect to ActiveSync and stayed at the bootloader screen.
I still do not know how to flash it successfully.
If anybody can help me out, I'll be extremely grateful!
Thanks
Prateek
take the battery out, put it back.
connect your Vox (USB).
Hold the camera button and turn on your Vox.
you should see a red, blue and green screen (if my memory works as it should) and the computer should recognize the device, though you won't be able to explore it with activesync.
Run the SDA_ApplicationUnlock thingy (if you need to)
now try flashing the device.
If it flashes but after 3% restart, you need to do a CID unlock right before flashing.
hope that helps.
Invalid Vendor ID
Hi MoRkusReX,
Its giving me Invalid Vendor ID. How do I CID unlock it?
Thanks,
Prateek
http://forum.xda-developers.com/showthread.php?t=330909
first post , download the last file:
Vox USPL- CID BYPASS.zip
There a Readme file in there, you should read it.
post back where you're done.
No Luck!
Hi MoRkusReX,
Since my phone is not booting into the OS thus I cannot use the UPSL_CID provided in the link.
Only once I have been able to boot into my OS and followed the instructions given in the link. The phone comes to the Linux black screen and then switchers off. Then the ROM Update Utility with which i'm trying to update the ROM gives an error that "cannot connect to the phone".
So, now I need to flash my ROM from the bootloader itself. Have managed to get mtty and connect to the phone. But even trying ResetDevice command, the phone does not boot.
Can you tell me the exact steps to flash a new ROM from the bootloader itself including CID unlocking? Can it be done??
Thanks,
Prateek
prateekswarup said:
Hi MoRkusReX,
Since my phone is not booting into the OS thus I cannot use the UPSL_CID provided in the link.
...
including CID unlocking? Can it be done??
Thanks,
Prateek
Click to expand...
Click to collapse
yes it can be done.
you don't need to boot to OS, I couldn't either. after the steps from my first post here, run the uspl_116_jockyw.bat file. follow instructions.
that will unlock the CID.
Now the VOXs' screen should be white or so... then you run the ROM update thingy.
Hi..
I connected with the usb and got the bootloader screen.
tried running the SDA unlock program...the button to unlock the phone is grayed out. Cant click on it.
Next tried running uspl_116_jockyw.bat file
..cannot connect to phone and hence copy of haret.exe did not occur and neither did pmemtest run successfully...
What am I doing wrong??
ok..
first steps again..
battery out, back in.
connect USB
CAMERA button + Turn on.
now.. does windows do that USB sound? you know.. "tu du" ?
No sound....using win 2k Nt server edition...
but has detected my phone once on that USB and then allows me to talk to the phone using mtty....as in commands like ResetDevice work on the phone using mtty..
also, cannot get into bootlaoder mode with USB plugged in...
Steps and their results:
Disabled USB connections in activesync
Booted to the bootloader (red and green and Blue screen)
Connected the USB
"USB" displays on the left hand side corner
Now tried unlocking using Apllication unlock...grayed out button...
Tried running USPL bat but stops and says phone not connected when copying haret.exe
Using windows NT server 2003
if the SDA Application unlock button is grayed, of course the USPL won't work.
why "Disabled USB connections in activesync"?
And.. I doubt this is the problem but you should check on an winXP pc, I did it on XP.
No Luck!
Tried the same with USB enabled...same result
basically the thing we need to figure out is why your computer doesn't recognize the device.
the rest is obvious.
when I go to bootloader on my device windows pops up with a message says windows found device "and it's ready to use". like when you cannot every other USB item.
have you tried doing that on an XP system?
Going to do that now....lets hope it works....
Does ur activesync turn green when u connect at bootloader?
Also, I have removed my sim and memory card...thats okay right?
yeah, I removed both of them.
and no, activesync didn't turn green, but Windows recognized the device when I turned it on. turn on the speakers and wait for that winxp "USB connected" sound.
Still No Luck!
Tried doing the same on win xp...
no luck...
it connects to win xp ans says new device found...and ur USB device is now
ready to use...
after that i try application unlock it still gives me grayed out button....
ne suggestions???
Finally....
Finally got it done...
Thanks for all the help....
I managed to cold boot into the system for one time ans then SDA unlocked it and then ran UPSL .... it ran and then balnked out...
then i disconnected the usb before the ROM update utility and unchecked the USB option in active sync...
then i flashed it with the ARA rom...
Seems to be working okay now..will test for a day and see...
thanks a lot
prateek
prateekswarup said:
Finally got it done...
then i disconnected the usb before the ROM update utility and unchecked the USB option in active sync...
prateek
Click to expand...
Click to collapse
I'm not sure this step was necessary but as long as it worked.. good times.
btw, how did you boot into the system?
kept trying hard reset and repeated booting...( it was booting 1 in 15 times type...)..and one lucky time it didnt hang..so used that window to slip in the SDA unlock and USPL..
thanks ...
you're welcome.
First of all, I wish to say thanks to jockyw2001 for coming up with a solution for all those 1.56/1.57 Tilts. You guys all got a Merry Christmas... you lucky SOBs. Haha
However, there are newer versions of the Kaiser/Tilt coming out with 1.82.00 display versions and the current fix for 1.56/1.57 do not work. They get to the WSOD and stall.
I may be one of the first to have a 1.82.00 phone - I understand that it is the latest version put out by HTC, but I won't be the last. So I am hoping that jockyw2001 reads this thread and will continue to work on finding solutions for these newer versions of the Kaiser.
@jockyw2001
I've got a bounty for you if you can figure this one out... I need to switch from Traiditonal Chinese (which my phone came with) to the WWE ROM to be able to use this phone. Thanks a bunch beforehand!
Michael
Mike some questions:
1. did you try 1.93 (i posted in the original thread)?
2. do you see tri-color with any of the versions you tried?
3. do you see "USB" on the display after a few seconds? If yes with which version?
4. do you see "unrecognized device" after unplug and replug usb cable? or do you see MS sync device in device manager?
5. do you have MTTY up and running?
Note that you should always run the SSPL with USB cable connected!!
Answer to your questions...
jockyw2001 said:
Mike some questions:
1. did you try 1.93 (i posted in the original thread)?
2. do you see tri-color with any of the versions you tried?
3. do you see "USB" on the display after a few seconds? If yes with which version?
4. do you see "unrecognized device" after unplug and replug usb cable? or do you see MS sync device in device manager?
5. do you have MTTY up and running?
Note that you should always run the SSPL with USB cable connected!!
Click to expand...
Click to collapse
A1. I did try 1.93 and I still got WSOD, I lost USB connectivity at that point
A2. No tri-color screen with 1.56, 1.93 or the original HardSPL v1
A3. I do not see "USB" anywhere, the connection goes dead at WSOD
A4. No and no.
A5. I got MTTY 1.42 and tried it, but I'm not sure I'm using it correctly. I'll have to re-read some posts for that.
Thanks for the followup. I'll try and figure out MTTY and get back to you on this.
Michael
good luck to ya..
i am sure it ll just be a matter of time before u get a solution, he is pro and before u know it u will be part of the flashing world here on xda..
the team here on xda rocks..!!
a in yul said:
i am sure it ll just be a matter of time before u get a solution, he is pro and before u know it u will be part of the flashing world here on xda..
the team here on xda rocks..!!
Click to expand...
Click to collapse
Thanks for the well wishes... I have faith in these guys based on the body of work that is available here. Almost every HTC phone ever made has been hacked so I know it's a matter of time before they get this one sorted out.
Michael
Hi dear,
I have the same problem.
During the installation of Hardspl on my new Tilt, the PDA doesn't go in Bootloader mode (3 colors screen) but stop it in a white screen......and I can only make a soft reset to continue to use it.
I have read something about these new version of Kaiser but I need to reflash my Tilt.
Is there someone who know the way to resolve this problem?
I'll post my Boot version shortly....
Thanks and regards
Daniele
I have a 1.57 (from the ROM version in Device Information, right?) Tilt that's new (stock at&t ROM without the customizations). I get the WSOD using both the methods of doing the HardSPL. I was hoping to start fooling around with my new toy!
I'll re-read the forum, but my experience seems consistent with the people in this thread.
TTFN
If I have some time left today I will post another patched SPL.
Oh yeah it *does* cost time ya know ...
You wouldn't happen to be able to pull your existing Traditional Chinese ROM off of that their badboy would you?
I'd really like getting my hands on a chinese ROM for the IME.
Please try the attached file. Follow the instructions exactly!!
The only thing I'd like to know is if display is tri-color and if "USB" appears.
Don't do anything else with it!
- download the attached file
- REMOVE SIM and SD CARDS !!
- connect usb cable
- copy sspl-1.16-test-on-kaiser.exe to your device and run it (leave usb cable connected!)
- screen should be tri-color and after a few seconds "USB" should appear on the display
display is tri-color and "USB" appears
Orange Tytn II French version HSPL 1.81
The test is ok ...
Patrick27 said:
Orange Tytn II French version HSPL 1.81
The test is ok ...
Click to expand...
Click to collapse
Thx, will wait for feedback from the original poster.
Do you actually have trouble running pof's SSPL and my SSPL 1.56 ??
re 1.81
it is ok with 1.56
Chinese ROM
ouminan said:
You wouldn't happen to be able to pull your existing Traditional Chinese ROM off of that their badboy would you?
I'd really like getting my hands on a chinese ROM for the IME.
Click to expand...
Click to collapse
I guess I'll have to go check some threads about how to dump the ROM on the Kaiser. I thought I saw an HTC traditional chinese ROM on one of the links for the Kaiser though. I'll have a look. If not, I'll do my best to dump this bad boy for you.
Michael
Hi there,
I just tried your new test file on my 1.57 Tilt and followed your instructions exactly. It worked. I get the tri-color screen and it says USB on it. It also says:
KAIS1*0
SPL-1.16.Jump
CPLD-0
Thank you for your efforts... no more WSOD!
So, is that it or is there another step? I'm not sure.
TTFN
greggerca said:
Hi there,
I just tried your new test file on my 1.57 Tilt and followed your instructions exactly. It worked. I get the tri-color screen and it says USB on it. It also says:
KAIS1*0
SPL-1.16.Jump
CPLD-0
Thank you for your efforts... no more WSOD!
So, is that it or is there another step? I'm not sure.
TTFN
Click to expand...
Click to collapse
Yes sounds like progress
With this 1.16 do you see "unrecognized device" after unplug and replug usb cable? or do you see MS sync device in device manager?
Can you also try with 1.93 from this post please.
@MikeLim: did u try?
1.16 Did not work...
jockyw2001 said:
Please try the attached file. Follow the instructions exactly!!
The only thing I'd like to know is if display is tri-color and if "USB" appears.
Don't do anything else with it!
- download the attached file
- REMOVE SIM and SD CARDS !!
- connect usb cable
- copy sspl-1.16-test-on-kaiser.exe to your device and run it (leave usb cable connected!)
- screen should be tri-color and after a few seconds "USB" should appear on the display
Click to expand...
Click to collapse
jockyw2001,
I followed your instructions to the letter but still ended up on WSOD. After about 15 seconds the USB connection times out and dies. Back to the drawing board
Michael
Just for info, I noticed this thread whilst looking for a solution to my WSOD, my Kaiser is 1.88.00.00 - (UK Orange) I used the JumpSPL1.56-kais on mine, and it worked fine, Tri-Color - USB, then installed
Also, I can tell you that so far, I have been unable to SIM-unlock via IMEI-Unlock.
MikeLim said:
jockyw2001,
I followed your instructions to the letter but still ended up on WSOD. After about 15 seconds the USB connection times out and dies. Back to the drawing board
Michael
Click to expand...
Click to collapse
After unplug and replug of the usb cable, please check if there is a microsoft usb sync device in device manager
Have you ever tried a hard reset and then run a SSPL?
jockyw2001 said:
Yes sounds like progress
With this 1.16 do you see "unrecognized device" after unplug and replug usb cable? or do you see MS sync device in device manager?
Can you also try with 1.93 from this post please.
@MikeLim: did u try?
Click to expand...
Click to collapse
Let's see... when I unplugged the USB cable and re-plugged it, Vista detected a new device and started installing a USB Sync driver. I think it finished. Actually Windows Update decided there was a new HTC Sync driver available for me, but it didn't successfully install. I'll try the next step.
TTFN
I have flashed dutty's v4 rom and i want to change it
the problem is that when i try to do so i run
KaiserCustomRUU
my device goes into the 4 stripes screen it says usb
but then the program in the pc says error 260 and doesn't load the new rom
my phone still works as dutty's rom is still in but what can i do to change it?
Thank you and i have searched a lot but could not find a solution
thimiost said:
I have flashed dutty's v4 rom and i want to change it
the problem is that when i try to do so i run
KaiserCustomRUU
my device goes into the 4 stripes screen it says usb
but then the program in the pc says error 260 and doesn't load the new rom
my phone still works as dutty's rom is still in but what can i do to change it?
Thank you and i have searched a lot but could not find a solution
Click to expand...
Click to collapse
OK lets start at the basics...... In bootloader mode (tricolour screen) what text does it say at top of the screen?
Have you DEFINITELY Sim Unlocked and CID unlocked?
it says these things
kais130 mfg
spl-10.0.Olipof
cpld-8
Ok that confirms you have the capability to flash. I have seen in the past some people have managed to flash one time only using jumpspl but then their device reverts back to original bootloader...I was one of those people
Next question then...Can you boot the phone normally and gain an activsync connection to it?
yes
i can use my phone normally
only i cannot put a new image in
Are you using Xp or vista? If using vista it may be worth trying a reboot... sometimes it goes doolally with its usb ports. If you cannot see the phone through WMDC or activsync after a reboot it is worth going to SYSTEM (on your PC) viewing non present devices through device manager,( Drop to Command prompt and type... Devmgmt.msc set DEVMGR_SHOW_NONPRESENT_DEVICES=1 ) removing the relevant phone connection and then re attaching it so that windows re detects it.
If you can get a connection via actvisync (win XP) or WMDC (vista) to your phone then all should be ok. Uncheck the activesync/ WMDC "allow USB connections" and try again.
If this still doesn't work then search around here for MTTY. That will allow you to specify the usb connection to the device...amongst other things.
thank you for your time
i have win xp and activesync works nice
the problem is when bootloader starts
When you attempt flashing, do you do it from the device already booted into windows mobile or direct from bootloader?
Which ever way you have tried it, try ther other way.
Not teaching you to suck eggs but just in case you dont know.... To get direct to bootloader hold camera button and soft reset with stylus whilst holding camera button down and the tri colour screen should appear.
With device at the bootloader screen, Can you confirm that you hear the windows "noise" when you unplug and re plug the USB cable just as you would when plugging and unplugging the device normally. This will determine if the device has connection at the bootlaoder stage.
why not just flash using the microsd card. its much easier that way
yes it has connection
the thing is that i have already flashed as i told before with dutty's v4
now i can't
Usually Error 260's are related to the USB port functionality ( Port can't be opened etc).
The SD card method or MTTY should sort you out.
thx again
hope it works
at least the sd trick worked!!!!
now running on winmob 6.1
Glad to hear you sorted it.
almost
i cannot use my sd card cause i have to have it formated in order to put a new rom in
thimiost said:
i cannot use my sd card cause i have to have it formated in order to put a new rom in
Click to expand...
Click to collapse
disable USB connections in ActiveSync and flash.
This Link gives a list of eror codes for Hermes, and probably the same for Kaiser.
It's likely that you have a USB port error - maybe try changing the USB port you use or a different sync cable - or just stick to SD card flashing in the future - I keep an old 1gig card for this.
this IS the problem...i cannot flash...
it stays in the bootloader with the message i wrote
thimiost said:
it stays in the bootloader with the message i wrote
Click to expand...
Click to collapse
It happen to me before hardspl again fix it, not sure why
you mean use the sd method to do hardspl again?
OHHH lord dutty we need your new rom
I am trying to Unlock T-Mobile MDA Vario III
R 1.27.15.32
D 22.51.88.13H
G 1.82.00.00
and on the first step installing Hard-SPL, it goes into Bootloader mode and shows
KAIS130
SPL-1.93.0000
CPLD-8
on the 3 color screen, after a while it shows "USB" i replug da cable, and the progress bar appear, BUT IT STAYS AT 0% FOREvER.
I try this one - JumpSPL1.56, it goes into bootloader, shows
KAIS130
SPL-1.56.Jump
CPLD-8
on the screen........... and again the same situation, 0% FOREVER!!!
tryed this one too, - JumpSPL1.93, in this case shows
KAIS130
SPL-1.93.Jump
CPLD-8
BUT Stucks - USB doesn't appear on the screen!!!
I also try this "solution" (while my MDA shows "0%" on the screnn);
4. After some time you get a communication error Message. DON'T RESET YOUR MOBILE DEVICE. DON'T TOUCH IT.
5. Press Exit to quit KaiserUnlocker.exe on your Desktop machine.
6. Unplug and replug the USB cable.
7. Start the KaiserUnlocker.exe again and wait a little bit.
but doesn't work - when i replug the cable PC discover it like "Unknown Device" (VEN_000&PID000)
PLEEEEEEEEEESSEEEE HELP me. How can i flash this Olipof SPL!!!
the same thing happens to me with one tynt II brand 3 ita!!
who helps us?
thanks!
Hi,
Can you try these steps (from this thread):
kyphur said:
1a. download the attached files
1b. pull out the battery and reinsert it (this step *is* important)
1c. connect your PC to phone with a USB cable
2. REMOVE SIM and SD CARDS !!
3. copy JumpSPL1.56-KAIS.exe to your device and run it (make sure the USB cable is still connected). If you still get a white screen then reset your device and now try JumpSPL1.93-KAIS.exe
4. after a few seconds "USB" appears on the phone display
5. unplug and replug the usb cable
6. deselect "Allow USB connections" in Activesync connection settings
7. now flash hardSPL (run KaiserCustomRUU.exe from flash-hardSPL.zip on your PC)
Click to expand...
Click to collapse
Hard SPL 3.56 download here: http://forum.xda-developers.com/attachment.php?attachmentid=92774&d=1213511155
Let me know what stage you get to and what errors you get. If the RUU gives an error you can check here first: RUU Errors
Ta
Dave
DaveShaw said:
Hi,
Can you try these steps (from this thread):
Hard SPL 3.56 download here: http://forum.xda-developers.com/attachment.php?attachmentid=92774&d=1213511155
Let me know what stage you get to and what errors you get. If the RUU gives an error you can check here first: RUU Errors
Ta
Dave
Click to expand...
Click to collapse
perfect!!!!
tnxxxxxxxxxxxxxxx
thanx
thanx,
you r legend bro
much appreciate
where do u learn all these stuff ?
hauntedgrave said:
thanx,
you r legend bro
much appreciate
where do u learn all these stuff ?
Click to expand...
Click to collapse
Spending too much time on here reading everything
Dave