wm6 sync issue - General Topics

I had HERM 200 with rogers, i upgrade to wm6, using windows vista, sync contact and email etc work fine.
problem: can not coply file or upload file to the device through file explorer. sync/window mobile device manager will auto disconnect the device
connection via usb. i duno is that device disconnected from computer or the device manager disconnect device.
it happen everytime when i copy file from computer to device, anyone knows about it?

Hi there, i had a similar problem, vista wouldn't let me copy files over to my Orbit and randomly disconnected, turned out it was the usb hub i had the lead plugged into, soon as i plugged it direct into my PC i had no probs. Hope this helps Ad.

i tried in different platform again
OS: windows XP via activesync 4.5
still would not allow me to copy files from computer to device. even tried with windows media player 11 sync the music file, wouldn't work either.
however copy within internal device like from device folder to device folder is fine.

BTW device info
HTC TYTN with WM6
ROM: 3.30.3.3
ROM date: 05/15/07
Radio version: 1.16.00.00
Protocol Version: 32.53.7018.01H

Related

Cant connet to Activesync on WM5 with USB

hey guys,
i upgraded my himalaya to wm5 yesterday, but i found dat i couldnt get my wm5 connected to pc after upgrading, the pc doesnt recognize my device, i've tried both activesync 3.7 and 4.0... can any1 help?
Active Sync new version 4.1 [Build 4841]
or go to microsoft homepage to find the latest version.
ok, will have a try.. thx so much :wink:
link to it
http://www.microsoft.com/downloads/...012-8793-d2d180a42dfa&DisplayLang=en#filelist
Hi all,
I have the same problem:
Upgrading to 1.60c.00WWE
Radio 1.17.00
and i have installed activesync 4.1 (last release from microsoft)...
activesync said he try to connect to my qtek 2020 (worked good before rom upgrade with activesync 3.8).
I also try to start from a good windows XP (and clean) version: i format my pc and reinstalled windows xp on it (sp2) + activesync:
same result (device detected but no sync)
on my qtek activesync (in the bottom on screen) said he is connected but not on my pc...
Any idea will help me good, thx a lot !
i got same problems right now, any one help us please
I. Try To use the latest Active Sync Program
II. Try to shutdown or Disable any antivirus or Firewall program
IV. try to restart the computer And the Device (Your PPC)
it will work . .. thanks
Me too
There's something wrong in the OS image. When I connect my Wizard via USB,I have no problems. But Himalaya want not connect. Why? I don't have SP2 in XP(Wizard is working correctly)!
ACTIVSYNC
If you are connected to a usb hub, try not using it and connect direct to computer. that sloved all of my sync issues of the phone not being seen.

HOw to connect i-mate jasjar through usb with pc

HI All
I m trying to connnect my i-mate jasjar with pc through usb cable but when i install the driver the message appears that the wizard cannot find the required software which software i need to install for connecting i-mate-jasjar with pc
We're going to need more info to help you better. Specifically:
1. What version of windows are you using on your desktop computer?
2. Do you have Microsoft Activesync installed on your computer? Download it from here and then give it another shot.
3. Is this the first time you're trying to connect your phone to the computer or have you done this before and has it suddenly stopped working?
Sounds like you haven't installed ActiveSync yet.
If you have vista download this: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
good luck,

Upgrade failed - no error message!

Hi there!
I just tried to install Cotullas WM6.1 ROM on my Magician (MDA Compact, Radio 1.12), as it didn't work on Vista I used XP. Entering bootloader mode was no problem, but on the second page of Update.exe I get an overview:
Your device software is about to update from:
[Nothing in here]
To:
[Nothing either]
However the upgrade completed on the PC without an error message, but I got no "100% Upgrade OS Image Complete" message on my device an after a reset there's still WM2003se on it.
What's the problem and how can I fix it?
seems you have no USB connection between device and PC.
you should check it. check if you see on device screen "USB\n\n\n\n\n1.0X"
Yes, the device in Bootloader mode shows "Serial v1.0.2" an when I connect it via the cable Serial changes to USB. My guess would be that Update.exe checks the wrong port. But even if the phone is not connected at all the update finishes without error.
Is Active Sync needed for an upgrade?
Where did you extracted the ROM?
Can you try to extract on the desktop and don't put in any folder and then flash the ROM.
it's on my desktop in the folder "HTCMAG_ROM_WWE_O3", copying files directly on the desktop didn't change a thing
UPDATE: Installing Active Sync solved the problem
yes you need install Active Sync for drivers.
is there previous your ROM 2.03TX?
is that TRUE meaning you couldn't upgrade to anything else! 2.03TX is bad rom!!!
It was no problem with the upgrading-process itself, it was simply that the program didn't find the phone but showed no error message. Might have something to do with a newer driver ActiveSync installed or just some registry values the update-tool needed.

How do I install apps with no SD card?

I've not installed anything on the phone before.
I tried to copy a cab file to the SD card but I've got problems as the phone thinks there is no SD card present.
Can I copy the cab file to the phone's memory? I cannot see the phones memory through explorer on my PC though do I need some special software?
Srry if this is a stupid question I did search but found nothing
Try installing MS ActiveSync. Connect the HD2 to the PC using the usb cable. Once installed, you will be able to see the HD2's files in Windows Explorer. Just copy the cab file to a folder. Disconnect the phone and launch the cab file from the phone's file manager.
Cheers
Microsoft says Active Synch will only work with XP SP2 and earlier I have XP SP3.
Is there anything else I can use?
What does everybody else do - do you not install anything via PC to the phone?
men8ifr said:
Microsoft says Active Synch will only work with XP SP2 and earlier I have XP SP3.
Is there anything else I can use?
What does everybody else do - do you not install anything via PC to the phone?
Click to expand...
Click to collapse
For Vista or Windows 7 the used tool is called Microsoft Mobile Device Center (MSDC). For Windows XP (even SP3) active sync has to be used. Did you try it to install? I´m sure that it will work.
To install applications at your mobile device do the following steps:
a) connect it via active sync
b) using your PC´s Explorer to copy the cab-file containing your application to your mobile device and remember the place you copied it
c) disconnect your mobile device
d) using your mobile device´s go to the directory you copied the cab-file and start it
This way your application will be installed
But I´m sure you would have found the answer without asking here. Mr. Google knows it already
men8ifr said:
Microsoft says Active Synch will only work with XP SP2 and earlier I have XP SP3.
Click to expand...
Click to collapse
XP SP3 here, ActiveSync works with no problems.
As to the installing files to device - you may run out of memory soon, so I'd suggest buying even the smallest card (although preferably min 2GB, if you intend to toy with SD Android at some time)

Can't connect phone to Zune

Hi everyone!
I have a HTC HD7 with Dynamics7 1.21 ROM. I have 2 PCs, on one i can sync my phone with Zune, on the other one Zune shows the message "No devices connected" (I'm from Austria, but I think the translation is OK^^)
working PC: Widows 7 Professional x64
other one: Windows 7 Ultimate x64
The phone is detected properly in Device Manager (driver version 4.8.2345.0).
Zune launches automatically when I connect the phone.
The USB port is working properly, because other devices are working (mouse, usb-stick, card reader, external hdd).
I have uninstalled VMware Player, libusb-driver, dlportio-64-driver, MSI OverClockingCenter, MSI GreenPowerCenter and reinstalled Zune (uninstall, reboot, install).
As I remember, everything was working fine some months ago, but I don't know what I changed until now. Please help me.
If you need more information I'll provide it.
Thanks in advance,
Mr nUUb
EDIT: I also reinstalled the drivers and deleted the contents of "C:\Users\USERNAME\AppData\Roaming\Microsoft\Crypto\RSA". I tried to delete the certificates via certmgr.msc but I can't find them there.

Categories

Resources