I've recently installed Dutty's NewBuild Rom N0.6 +NETCF 3.5 AT&T on my Tilt and everything is running great except for IE. When I put any URL in the address bar and hit enter it says "Connecting.." then "Loading 0KB" and then it does nothing. I have tried rebooting, as well as verifying connectivity, but still no workie. Any ideas?
As far as reflashing the OS, this is a last resort for me because I don't want to go through the hassle of reinstalling and configuring blackberry connect and having to get removed/readded to my company's BES. Any help would be greatly appreciated. Thanks!
Frubbish
u need to run either the enable or disable proxy cab..I forgot which one. Dutty has these cabs on his server, where you got the rom from in his cab collection. You shouldn't mess with the proxy, there's no need to if you ever did something like that.
Related
I've recently upgraded my MDAc with the T-Mobile 1.13 ROM upgrade from their website.
Everything else seems to be fine except for ActiveSync, it's very tempremental- I managed to sync up data on the first connection but later that same day, I connected the device again and it doesn't seem to do anything except charge. I don't even see the AS tray icon either.
Anyone else had similar problems (and solutions for it)?
Thanks.
Had same type of problem myself, fix was to shut down Activesync on computer completly and deinstall, the reinstall active sync(3.8.0) connect device and give a new device name.
Ok thanks- I will give that a go.... I've got AS installed on 4 PCs :shock:
Still doesn't work- I remember actually trying re-installing AS on another machine with the same result.
Think I may have to go back to the 1.12 ROM.
Try hardresetting device sometimes it takes more than one go to get it stable!!!!!!!!!
I've tried about 5 hard resets now...
But it seems to work for the first couple of times then no more.
Another thing, I tried installing Card Export again and the icon for that also does not show up on the tray.
Anyone know if it is possible to downgrade to 1.12 with a shipped ROM?
If u get an AS connection that is stable then yes
Just to 'close' the topic; I went back to 1.12 ROM and all seems fine again.
This is my first Treo 750, but not my first time flashing a ROM. Whenever I've run into problems with settings, I've always found Cingular/AT&T setting CABs readily available here that worked. I've tried every settings CAB I could find, but I still can't get to Media Net for my email and PIE. I even went to the AT&T support web site, did everything they said to do, but NOTHING!
The official AT&T WM6 update went fine today... even did a hard reset before trying set-up... just can't get onto Media Net, set up email like I've always done before.
Sure would appreciate any help, a CAB that is known to work on the Treo 750 with WM6. Thanks!!!!!!!
Hi,
I've got a HTC Hermes running Schaps 4.31 ROM. Everything was working fine until I install the latest version of Wefi. After it was installed, it slowed down my Hermes so I uninstalled it last night (and it's speed increased straight away).
Now I can't connect to the internet via usb when it's connected to my laptop. Instead it will always use my 3g connection. I've deleted the pairing, soft reset it, and set it back up again. I've also unticked the "enable advanced network functionality" setting and this has made no difference.
I've done various searches and am now at a dead end. I could do a hard reset but don't really want to if there's an easy fix for it.
Any ideas ?
Thanks.
Don't worry. After reading loads more it seems I'm not the only one to have issues after uninstalling wefi. I've taken the oppertunity to put the new manila2d rom and so far everythings working again.
What ActiveSync version do you have? At first uninstall your current ActiveSync if it's older that 4.5, then download ActiveSync 4.5. Reboot the PC and soft-reset the device. Then connect them, setup and see if it helps.
I just got a T-Mobile wing from a friend yesterday. They had open touch software installed on it which I don't want. I like the plain jane WM 6.0, I know I'm boring.
I've tried 10 times to flash this thing with a few diffrent roms including calling Tmo USA direct and got a their download. One ROM i have flashes Hard-SPL goes thru the entire flash process then gets stuck at the Tmo screen.
All the other ones start the flash, get to 1% then i get error 260 connection failure. I HAVE to have my phone for work today. Any help quickly would be appreciated...
make sure to to allow activesync permission in your firewalls, or just disconnect from the internet and turn off your firewall and try to flash the rom
I have searched extensively and can't find answers that work for me.
I have tried several of the latest 6.5.1 and 6.5.3 roms on my Wing (which is HardSPL'd) and almost all of them have the same issues:
1) My USB to PC icon is gone in Settings\Connections. Did MS move it somewhere else? I'm having Activesync issues and think this is why, but can't change the "advanced network setting."
2) Wifi... I tap on it to turn it on or off, and more than half the time, nothing happens. It'll either stay on, or stay off. Ideas?
I had some of the same issues with some older 6.5 roms as well. Do I need to update/downgrade some of the individual device drivers or something? I'm at a loss.
Thanks, and sorry if this repeats anyone else's posts.
I am also having similar issues. I HardSPLed my wing and after I did that successfully I decided to update my wing with SIMPLY EVERYTHING 6.5.1 BUILD 23616 so I flashed it on my wing. It's installed fine and is working but now my wing doesn't connect via active sync to my PC (same PC i used to HardSPL my wing and flash this build). The USB cable is connected firmly as it does charge my phone, just fails to connect the phone with the PC via active sync.
I would really appreciate if someone can either provide a fix for this issue on this thread or tell us a way to somehow flash the device with another ROM (from storage card somehow).
Thanks in advance.
Sort of solved...
This is the one I found that works best on my Wing:
Search forums for "Illconcepts Current Projects" (won't let me post a link)
(the 28014 Titanium at the top of the page)
It is flashed from SD card like most are now (nice!).
Occasionally (usually after soft reset) the first time I try to turn on wifi it will fail to start the wifi, but it works after that until next soft reset. Have had no connection issues with ActiveSync.
Big plus of this rom is that it's fast, is lean and leaves lots of program space. I added Office and such, but on the SD card, so I can still run Skyfire (just about every other rom I tried didn't have enough program memory free to consistently run Skyfire after I installed all my standard programs).
Only down side I see (if this is one?) is that it has old PIE, not newer version, and PIE doesn't work properly at all. Only problem this has caused me is making it difficult to download/install java apps easily, as Opera Mini always seems to give me "invoke errors" when I try to download files, and since Skyfire only seems to be detected as a "full" browser, it won't pull up mobile versions of most sites, thus won't get access to the java app links, etc. Would be nice to hear of a solution for this (preferably how to fix Opera Mini's "Opera Invoke Error")
i guess this wil help u all coz it worked for me
rprakash said:
I am also having similar issues. I HardSPLed my wing and after I did that successfully I decided to update my wing with SIMPLY EVERYTHING 6.5.1 BUILD 23616 so I flashed it on my wing. It's installed fine and is working but now my wing doesn't connect via active sync to my PC (same PC i used to HardSPL my wing and flash this build). The USB cable is connected firmly as it does charge my phone, just fails to connect the phone with the PC via active sync.
I would really appreciate if someone can either provide a fix for this issue on this thread or tell us a way to somehow flash the device with another ROM (from storage card somehow).
Thanks in advance.
Click to expand...
Click to collapse
all you guys just need to open network cards under connections in settings. just tap the Sdio wlan wirelss adapter and then select name servers and copy the dns and alt dns as the same as in your desktops. Select ok and restart your phone..
it should work just fine...
all the best..
uh...no...
Doesn't have anything to do with DNS settings. DNS settings doesn't affect whether or not the wifi card turns ON or OFF. It affects connections. This is different, dude.