This is my first Treo 750, but not my first time flashing a ROM. Whenever I've run into problems with settings, I've always found Cingular/AT&T setting CABs readily available here that worked. I've tried every settings CAB I could find, but I still can't get to Media Net for my email and PIE. I even went to the AT&T support web site, did everything they said to do, but NOTHING!
The official AT&T WM6 update went fine today... even did a hard reset before trying set-up... just can't get onto Media Net, set up email like I've always done before.
Sure would appreciate any help, a CAB that is known to work on the Treo 750 with WM6. Thanks!!!!!!!
Related
I've recently upgraded my MDAc with the T-Mobile 1.13 ROM upgrade from their website.
Everything else seems to be fine except for ActiveSync, it's very tempremental- I managed to sync up data on the first connection but later that same day, I connected the device again and it doesn't seem to do anything except charge. I don't even see the AS tray icon either.
Anyone else had similar problems (and solutions for it)?
Thanks.
Had same type of problem myself, fix was to shut down Activesync on computer completly and deinstall, the reinstall active sync(3.8.0) connect device and give a new device name.
Ok thanks- I will give that a go.... I've got AS installed on 4 PCs :shock:
Still doesn't work- I remember actually trying re-installing AS on another machine with the same result.
Think I may have to go back to the 1.12 ROM.
Try hardresetting device sometimes it takes more than one go to get it stable!!!!!!!!!
I've tried about 5 hard resets now...
But it seems to work for the first couple of times then no more.
Another thing, I tried installing Card Export again and the icon for that also does not show up on the tray.
Anyone know if it is possible to downgrade to 1.12 with a shipped ROM?
If u get an AS connection that is stable then yes
Just to 'close' the topic; I went back to 1.12 ROM and all seems fine again.
Righ, I hope someone can help...
downloaded Faria ROM, ran flash utiliy, when it gets to 99%, the utility quits out with the communication error message. The phone, in the meantime, gets stuck on the 99% bit, and doesn't seem to go any further.
Any suggestions, please?
A.
Did you flash to T-Mobile 2.26 b4 upgrading?
Trying searching for solutions. Your problem has been asked several times in different threads... Including Faria's "The Real Thing" thread..
Actually solved it now, using the ShellTool tool...
However, got two new problems:
When trying to re-sync my contacts, I get an error 8007000e, device not having enough memory. Tried rebooting both my laptop and my wizard, bu nothing solved it. Searched the forums, found one reference, but no solution. If anyone has seen this, any ideas? I've also tried removing my partnership, to no avail.
Second problem I guess could be related - when I try to launch contacts on my PPC, it seems to launch, but it goes back to desktop straight away.
A.
AdamR78 said:
However, got two new problems:
When trying to re-sync my contacts, I get an error 8007000e, device not having enough memory. Tried rebooting both my laptop and my wizard, bu nothing solved it. Searched the forums, found one reference, but no solution. If anyone has seen this, any ideas? I've also tried removing my partnership, to no avail.
Click to expand...
Click to collapse
Did you use some backup utility (like Spb Backup) to restore your contacts from WM5 to your new WM6 device? WM5 PIM Database is a different format than WM6 PIM database and I've seen similar errors when someone tried doing a restore from a WM5 backup to a WM6 install.
I'm just using outlook 2003... synced all my contacts into it, and assumed WM6 would sync them back up again?
AdamR78 said:
I'm just using outlook 2003... synced all my contacts into it, and assumed WM6 would sync them back up again?
Click to expand...
Click to collapse
Yes, that is correct (you upgraded to ActiveSync 4.5, right?). Not sure about your error then as I suspected a WM5 backup restored on WM6.
When you upgraded to WM6, did you flash back to an official ROM (like TMobile 2.26) before doing the Faria WM6 rom? I find it cleaner to not flash from a custom rom to another custom rom.
At this point, I think its worth reflashing your phone. Drop back to an official rom then upgrade to the Faria one.
BTW: You've never mentioned if you have a G3 or G4. So if you are a G4 be careful doing this.
yeah, it's a G4...
I think, for the time being, I might drop back to WM5, as I'm travelling from tomorrow, and need my contacts... i'll try again when I get back on monday.
I have exactly the same problems
- activesync memory error
- contacts and new appointments problem
I already flashed my Wizard G4 (MDA Vario T-Mobile) several times with Faria's and X-plode and everyting goes smoothly but the erros always show up. Beside those errors, everything else seems to work just fine. WPA2, GPS softw, phone, etc etc
AdamR78: what rom of WM5 are you using? Can you give me a link so I can download it?
As for the contacts and new appointment problem it seems that if we run Clear Storage (Settings --> System --> Clear Storage) it does the trick. At least for me it seems to be working.
http://forum.xda-developers.com/showthread.php?p=1214274#post1214274
I had upgraded, reinstalled everything, all the hacks, even got the hidelogo.cab hack working. Bought a few 4GB MicroSD cards with MiniSD adapters and even THEY'RE all working.
I thought I'd died and gone to power users' heaven until I tried to install certificates. I'd imported them, and they installed just fine, they're visible when I go to the personal tab in the certificates applet. But the option in the mail settings to sign and encrypt my messages is greyed out, even though the certificates are installed.
Does anyone have any experience with this? I've searched and searched and all I've come up with are the procedures that I've already followed.
This is the last thing I really need to get working. I'm using Exchange 2007 through 4smartphone if that will help me get to the bottom of this.
As always, dear friends, any help/input is greatly appreciated!
I've recently installed Dutty's NewBuild Rom N0.6 +NETCF 3.5 AT&T on my Tilt and everything is running great except for IE. When I put any URL in the address bar and hit enter it says "Connecting.." then "Loading 0KB" and then it does nothing. I have tried rebooting, as well as verifying connectivity, but still no workie. Any ideas?
As far as reflashing the OS, this is a last resort for me because I don't want to go through the hassle of reinstalling and configuring blackberry connect and having to get removed/readded to my company's BES. Any help would be greatly appreciated. Thanks!
Frubbish
u need to run either the enable or disable proxy cab..I forgot which one. Dutty has these cabs on his server, where you got the rom from in his cab collection. You shouldn't mess with the proxy, there's no need to if you ever did something like that.
I posted the following item in the "Beginners instructions thread" last week, but only one person has responded. I am trying to repost again in the hope that more people will see it and that someone will have experienced this previously:-
I have read countless threads on this site and have finally decided to upgrade my O2 XDA from WM5 to WM6.
I have found the instructions for doing this, but have fallen at the first hurdle.
The mobile update utility cannot connect to my Wizard, (error 222). I am still able to sync with active sync, so my pda is seeing and being seen by the pc.
Is there anything that I can do to at least get started please?
P.S. I have tried downloading lokiwiz, but that doesn't work either. I tried searching google for it, but that only brings me back to this site.
Is it actually possible to upgrade or am I missing something really stupid?
P.P.S
I have now done a hard reset. The only thing that I have changed is the date and time. This is now an O2 Exec, completely as it came out of the factory. I am using Active Sync 4.5. Why can I not connect to the button rom?
im not too sure what your issue is but i think you will get an answer on ppcgeeks.com. i use this site and that one. you have a lot of experts between the 2 sites
Thanks aman1127, my main problem is that the mobile update utility cannot connect to my Wizard, (error 222). I am still able to sync with active sync, so my pda is seeing and being seen by the pc.
I have read all the warnings about turning your Wizard into a brick, I can't even get it to do that!
I have checked the help tab on the Mobile Updat Utility, but that gives me "error 404"
Is there a proper way to upgrade my device using software and instructions that are up to date?
I'll have a look at the other site as well. Many thanks for your help.