Hi all -
I have an older Audi a4 with the factory Concert/Bose radio. I replaced the CD changer input with one of these:
http://www.crutchfield.com/App/Product/Item/Main.aspx?g=50900&i=581DFVW&tp=1672
This allows me to input audio to my car radio using RCA-type connectors. I then got one of these:
http://www.cablestogo.com/product.asp?cat_id=2009&sku=03178
that lets me plug into a 1/8 jack and send the audio to the RCA jacks. I then got:
http://www.ppc4you.com/pages/13635.html
which allows me to pluf the 1/8" plug into my Trinity. I didn't use this exact one, but mine is similar to this one. Don't use the 1/8" converter that is in the form of a single solid piece, only use the ones that have a short length of wire between the two ends. The solid ones do not stay in properly. Also, by using the Y connector, I can both plug my Trinity into my stereo as well as plug in a regular 12v lighter power converter and power it. I then finished it off with the ProClip/Brodit cradle:
http://www.proclipusa.com/home/home.aspx?afid=42&admkt=670ca577
Everything works great! Once I have it all hooked in,
1.) I can play MP3's through my car stereo (useful)
2.) TomTom directions also go through my car stereo, and the music is slightly muted making directions easier to follow (very useful)
3.) Best of all, I tried calling my girlfriend (while the Trinity was in the cradle, playing MP3's through my stereo), and a.) her side of the conversation came through my car speakers, with the music muted, and b.) she said she could hear me just fine (but a little loud), which tells me the Trinity continued to use the internal microphone and amplified my voice the same way it would when set on speakerphone!
So, I now have the equivalent of in-dash navigation, integrated cellphone, and MP3 player. And I can take it with me when I leave the car! This is exactly why I bought this phone in the first place. What surprises me is that it actually worked!!! <grin>
Mike
Thanks for sharing your setup!
Good on ya!!
I share a similar story.
I drive a Mazda 3.
I installed a chip at the back of the stereo so that it allows an audio auxiliary input into my car stereo.
I then bought a 3-in-1 adaptor, car charger and mic adaptor from ebay.
This is so that I can place my craddle and phone further away, while having the mic externalised and stuck near my dashboard.
So in effect, same deal! GPS navigation + mp3 player while charging, calls get accepted no problem, and make calls via voice speed dial. Absolutely loving it.
Hey guys,
You should check out my set up, I have my Trinity on a GPS holder (suction cup), my trinity is then connected to a device like this:
http://www.oo.com.au/MP3_Player_Car_Modulator_FM_T_P5477C75.cfm
It accepts USB drives to play MP3's through the FM Transmitter, however I used the USB port to power my device, and the 3.5mm port (this allows you to plug in other devices and play through the device via FM) goes to my Bluetooth handsfree (i-Tech Radio Clip).
From here I have an ultimate wireless solution apart from the recharging, however Bluetooth really takes a lot of memory and slows the Trinity, however music plays and Tomtom works! no issues with that, the Radio Clip has remote functions so I can change music while Tomtom is still on, I don't have to minimise Tomtom and go to WMP to change music, I just do it on my Bluetooth device.
However this isn't a perfect solution, as Bluetooth really takes a lot of memory
I looked into using an FM transmitter approach, but there are a lot of FM stations around where I drive, so finding a clear channel gets to be a pain. Also, I'm stupidly picky when it comes to audio quality, which is better using a wired solution rather than the FM solution. Looks like a good apprach though!
hey guys
I bought a £50 car stereo from Lidl
which has a usb port
superb
x
In most cases with FM Transmittors and it depends on the FM Transmittor, it usually dominates the FM Channel, so if you had it on say 104.1 in which in Australia is 104.1 Today FM as long as the Transmittor is nearby and close to your aerial it is all good!
But yeah, I feel that bluetooth and FM Transmission can cause quality lose in Audio, however sometimes I can't tell the difference, I have the USB to 3.5mm converter and I was dumb enough not to find the USB and 3.5mm unit, which was available at that time, but oh well, alls well ends well.
http://cgi.ebay.com/ws/eBayISAPI.dl...item=160180673140&_trksid=p3984.cWON.m313.lVI
I bought this one and works great, it has everything I need, but when I connect it to my stereo, the music has no bass. Still have to figure that one out. Any ideas?
I have a small 2.5mm to 3.5mm adapter, then connect that to one of those tapes with 3.5mm jack. It works great on my PSP, but with my phone the bass is gone. I have 1.23 with GPS and WM5. I have to try different player (Using WMP) and the HTC equalizer & audio manager.
Anyway, I love the setup, everything is together into a cool device.
http://forum.xda-developers.com/showthread.php?t=333607
Hey! Exactly the same setup I had with my old Magician! I had glued the 2,5mm jack to the Brodit holder, so it would connect power and audio at the same time. It was a treat to use!
However, now I have a Sony BT2500 Bluetooth car radio and don't need no connectors (besides USB power) any more.
landshark said:
3.) Best of all, I tried calling my girlfriend (while the Trinity was in the cradle, playing MP3's through my stereo), and a.) her side of the conversation came through my car speakers, with the music muted, and b.) she said she could hear me just fine (but a little loud), which tells me the Trinity continued to use the internal microphone and amplified my voice the same way it would when set on speakerphone!
Mike
Click to expand...
Click to collapse
I have a similar configuration, on my alpine stereo.
Sound quality is great and everything works as you told.. very good but,
when i have a call, i can hear very well from my car speaker but the other side can't hear me my Trinity don't continue to use the internal microphone. I'm quite sure it's a trouble by audio jack to htc usb converter: every post i read i found only Y cables (audio and input power)... mine is 3 way: http://www.gpsforless.co.uk/product_details.php?id=7920
Or maybe a rom trouble? i'm using Bepe's 0.79 WM6...
does exist a cab file witch forces trinity to keep using internal microphone always??
i'm planning to buy a new radio with bluetooth audio streaming capabilities for my Trans Am.
probably this radio:
http://www.amazon.de/LG-MP3-CD-Tune...r_1_1?ie=UTF8&s=gateway&qid=1202059350&sr=8-1
Nice Price, Nice Functions, less Cable-Chaos....
Hi, I have a Palm Treo 750 and an original jawbone bluetooth headset. I was wondering if there's a way for me to play music through my bluetooth headset? Thanks!
i highly doubt it, those types of bluetooth earpieces are designed specifically for talking and as far as i know do not support stereo sound.
if you want to listen to music through bluetooth headphones you have to go out and purchase a pair of MotorROKR S9 headphones
http://direct.motorola.com/hellomoto/s9/
i own a pair and they are wicked for listening to music, although i'm not a fan of the earbud types of headphones and if you don't have the right sized head they wont fit properly, however they do support stereo sound for music. another point about them, they suck for taking phone calls and talking with them, they pick up way too much background noise, i only use them for music.
The only other alternative would be the logitech type, which i believe are more expensive but same idea. and they're not earbuds which appeals to me, i only bought the motorola type cuz they had been reduced to half as much as i remembered them being when i used to work for best buy lol.
these are the logitech alternative (never used them so i don't know what they're like although i imagine they kick ass for listening to music)
http://www.logitech.com/index.cfm/speakers_audio/headphones/devices/212&cl=US,EN
Looking at the product info on the site, these do come with an adapter for any other music device with a jack plug-in that doesn't have built in bluetooth.
Hey guys, I've got a motorcycle helmet with a bluetooth add on which supports stereo music and phone calls. The stereo speakers are located in the helmet and they're great for around town but when I'm on the freeway I like to use earbuds instead. On my original Droid if I plugged in my headphones they would override the bluetooth audio but I would still be able to control some aspects of the music with my bluetooth controls (track forward, track back). Anyway on the Droid X if I plug in my headphones they do not override bluetooth audio, no sound comes through the headphones so in order to play music through my earbuds I have to turn off bluetooth all together. My question is this, is there somewhere I can edit bluetooth priorities? I would like plugged in headphones to have first priority, I'm sure it must be possible since the Droid allowed me to do this, but I'm not sure how to go about doing it. I would really appreciate any insight on this, I've heard tasker may be able to do this but so far have been unable to make it work. Thanks!
Hi,
I'm wondering if there is any way to stream audio music and/or FM radio from Windows Phone 7 (I have the HTC HD7) to a non A2DP Bluetooth headset (I have the Jabra EasyGO).
It seems that I can only make and receive calls with it.
I've searched all over the place (and web) and cannot find a way to do that.
The only way is to get a new Bluetooth headset with A2DP capability?
Is there is a workaround, please let me know.
Thanks.
I don't know of one. As far as I know, the Headset profile is mono-channel only (plus another channel for the mic) anyhow, and probably quite low bandwidth, so it would likely sound awful.
Thanks for your answer GoodDayToDie.
But I don't mind for quality... Actually I'm not interested to listen for audio.
I just want, for example, to hear drive directions when I'm driving using navigation software (Navigon) instead of hearing from the loudspeaker.
Hmm... I thought the phone *would* use Headset profile for driving directions. Weird. I find the WP7 implementation to be so bad that I prefer to keep using a 4-year-old Garmin Nuvi instead, but I could have sworn I tested it and it came over the BT (and my car only has Headset, not A2DP). Maybe poke around in Settings?
Alternatively, if your car has Aux In, you could use a ripping cable (double-ended headphone cord, they're very cheap) and then the phone will play instructions over the cable into the car's stereo. This is also a great way to use the phone's music player, including Zune Pass if you have it, to play music in the car (I do this all the time). It uses less battery than having Bluetooth transmitting constantly would anyhow.
Hi there!
Has anyone experienced any headphones compatibility issues? I have dropped the idea of using stock headphones as I find them way behind any different pair that I own. The problems start when I plug the jack into my P8 and put it inside a pocket. It seems that when the jack moves just slightly around the socket, the phone goes crazy changing the volume, randomly stopping the playback or launching some kind of speech assistant. It happens so frequently, that I am not able to listen to a single song on the device.
I am using a pair of Cresyn C520S headphones with a single button and a mic built in the set - they have the exact same size and type of jack as my stock P8 ones.
There was no problem when I plugged a regular, no mic, no remote control, Sennheiser headphones.
As for the software, I am on branded Polish B200 OS and am using the full version of Poweramp (god! this is such a great player!) and a streaming service app Tidal with the premium pack allowing me to listen to music offline from my devices.
Please tell me this is not an issue with my new device, but rather a hardware compatilibity issue. If so, then which headphones could I buy to make it all comfy? Do I need to look for the ones that are made for iPhone (I know they do have a three button remote attached)?