I've successfully cooking a few Kaiser ROM's, thanks to Alex's tutorial, kitchen, and other folk's programs. The cook ROM works.
After flashing with my last cook ROM, everything work except I cannot access to the phone dial pad and the signal icon has a exclamation mark means no service. I know something must screw up somewhere in the registry.
I had one time tried to restore a backup file from another version of ROM, the PDA portion worked fine but the Radio died. But I just hard-reset it and reinstall softwares from scratch, that was fine.
So somewhere in the registry or software conflict must have caused this problem.
Wonder if anyone came across the same problem (no phone) and has a simple way to fix it ?
Thanks!
Related
Hello,
Don't know if this was covered as when I had the problem I can't find any solution here or on the internet.
As I am considering sending my Qtek 9000 to get the memory upgraded, I wanted to test and trial out a few WM6 upgrades but I stumbled upon a network problem where the 3G will not connect.
I removed the contents on the Extended ROM and applied Lt.Cmdr.Ivan's ROM as it suited what I needed. Once done I was not able to access 3G but can make phone calls and SMS.
I then reflashed to nncuong's ROM as it had the min stuff and max amount of space for my customisation. Still the network failed..
Then I flashed to Beasty & Laurentius' ROM, and the same thing happened. I applied both the radio and also extROM flashes as well. The radio went smoothly, but the extROM got locked and I was not able to open it... Overwritting now does not work and it will try to install the stuff from the extROM everytime I try a hard reset or reflash of the OS...
Lastly, I finally got it to work when I located the original extROM for the Qtek 9000. Reflashed the extROM to the device and loaded Ivan's ROM and the network came back Some MMS setting problems that was fixed with a registry hack but everything was back to normal and the Universal is now WM6 without any problems.
The extROM now can't be used as a storage at all and it must be kept with the Qtek 9000 original files so this problem does not occur when reflashing or doing a hard reset. using other extROMs will only make this problem come back again.
If anyone needs the original Qtek 9000 extROM let me know and I will load it here.
If it has been posted before or there is already a solution, please ignore the thread.
Thanks
--- EDITED ---
Posted is the attachement for the version 1.3 of the Qtek 9000. Extracting it will provide an EXE file.
1) Connect your Qtek 9000 to the PC and activate bootloader. ( hold light and power while pressing the reset )
2) Once its connected via USB, start the file and it will flash your device to the new ExtROM.
Note it will also replace your custom boot screen.
I have the same problem...
Can you post here the information or data about the extRom?
Thanks you in advance
Posted the attachment and instruction.
If you get the sddaemon can't start, delete it from the startup will resolve the issue.
hi all
i was using the Dutty's DualTouch v1.1 Rom in my phone than i made update to Duttys DualTouch V3 Final and i faced a problem the program menu without icons ...!!!
i attached the pic if there is anybady can help me ...
thanks for all
Hi,
did you do a hard reset after installing it for the first time? it usually solves certain issues related to that.
Well, at least it did for me. try a it.
sunstorm said:
Hi,
did you do a hard reset after installing it for the first time? it usually solves certain issues related to that.
Well, at least it did for me. try a it.
Click to expand...
Click to collapse
Exactly what I would recommend. Good post sunstorm!
i will try and i will tell u...thnx
after the hardreset ,,every things is ok....for one day ,ido him softreset the same problem back...do i have to go back to the old rom or what ....
Hi sayyas,
maybe you might want to post a list of apps which you have installed on top of Dutty's V3. I'm sure that somebody will come along with prior experience with the same or similar app list and tell you about the necessary rectifications necessary for the apps and the rom to function properly. I'm suspecting a simple case of conflict in installed apps?
For instance, did you try to install the latest version of HTC Home on top of the one installed with the rom? I know that it will take a bit of tweaking and a dll replacement before the necessary verification checks are bypassed for the plugin to work on the kaiser as the latest version was actually written for the polaris, iirc. that being said, the mentioned app is just one of my experiences and seriously, an issue separate from Dutty's finely cooked rom.
hope this will help us to help you.
I've tried srerching the boards to no avail but I was wondering if there were any downoad links to restore a HTC S710 back to the original BT mobile rom?
Thanks for any help.
EDIT-
I am asking for this as I have flashed her S710 with a different rom and it seems to have developed a fault where it has started vibrating randomly. She's had it for months and its worked fine up until now.
I don't think there is such a ROM. It's some base ROM and than BT stuff is added to it.
check this out: http://bt.custhelp.com/cgi-bin/bt.c...346&cat_lvl2=1265&p_cv=2.1265&p_cats=346,1265
Check out the vibrations. they might not be random. they might be due to some software or script. (unless you have already checked and ruled out this option)
Deroc said:
Check out the vibrations. they might not be random. they might be due to some software or script. (unless you have already checked and ruled out this option)
Click to expand...
Click to collapse
Yes look if there are around files with *.mscr extension, maybe in the /Windows/Startup folder
Here is the link where you can restore to BT settings.
Regards,
Andy.
http://bt.custhelp.com/cgi-bin/bt.c...346&cat_lvl2=1265&p_cv=2.1265&p_cats=346,1265
Chazam - did you ever get to the bottom of this. As i see it the link above only gives you the additional BT Braodband-Anywhere software which you load on top of a base ROM, and i think that it is the Base ROM you are after. the reason i ask is that I want to flash my S710 with one of the cooked ROMs on this forum, but like you if i need to send it back to BT i need to restore it back to it's factory default?
Does anyone know if it possible to extract the original ROM and then flash it back in the future? (probably not as simple as that but i can only ask????
In case other people have the problem: Update to the latest version of ppckitchen!
Hello,
I was not satisfied with the current available rom's and decided to cook my own, I used the ppcgeeks kitchen to cook a 21042 wm6.1 rom and included quite some OEM packages. After building and flashing the ROM my device started, and got in the SPL (where you can see the radio/rom version). But it would not get past there. I tried flashing again (without sim and or memory card), hard resetting after flashing, and upgrading the hardspl to 3.59. All to no avail.
I thought it might be an issue with one of the OEM packages, so I started a new project in the kitchen and left everything to default and directly build the bare ROM. The problem still persists. I noticed the only carrier available as a choice in the kitchen was AT&T, I live in europe so this might cause a problem? (absolutely not sure about this, just poking around).
Some more details:
R: 1.70.19.09
G: 25.83.40.02H
D: 3.14.00.00
Luckily I can get in the bootloader and flash whatever I want and just go back to the stock ROM, but I rather want my own, so I was wondering, can anyone help me with this issue?
Thanks in advance, peterrus
Does the backlight dim or does it stay on constantly? If it dims, then you have an issue with your SYS or OEM. If It doesn't dim, then you have an issue with your XIP. Was the kitchen already ported to run on a Kaiser? Which kitchen did you use from ppcgeeks? A little more information will help figure out your issue.
It does dim indeed, so it seems I have an issue with my SYS or OEM, tell me more.
I used the latest version but I am not aware of any versionnumbers, this is the announcement post: http://www.ppckitchen.org/forums/showthread.php?t=650
I could get the versionnumber from the kitchen, but I just uninstalled to try an older version, and updating it takes about 2 hours.
The kitchen is said to be kaiser compatible
I see however that there are others experiencing the same issues. I am gonna try an older version of the kitchen and see what happens.
Test the older kitchen like you are already doing. I suggest creating a base build without any packages included, so you can verify that the base ROM is OK. This will help with the process of elimination. Now, you should also read any documentation with that kitchen to verify that the OEM folder is exclusively for the kaiser. The OEM folder contains device specific settings and drivers. So using an Elfin or Polaris OEM with you kaiser will cause lots of issues (mainly the one you're experiencing now, stuck at splash screen). Again, give the older kitchen a try and post how that goes and we'll go from there.
Using the old kitchen () I can not succesfully produce a working 21042 ROM.
Using the old kitchen I can produce a working 20931 ROM.
I have not tested the new kitchen yet. But when I find time for that I will post results.
So, using the new kitchen I also can not produce a working 21042 ROM, a 20931 ROM works fine though, so I think i'll just leave it like this.
Unzip and add
This to your sys and see if it helps.
The ppckitchen authors have pushed an update which seems to fix the issue, so josh: I haven't tried your fix yet because I prefer the official update over other solutions, but thanks anyway it seems I can now succesfully boot the rom.
Hi everybody.
I have, installed on my Htc touch cruise, the Kostas wm6.5 Rom.
Everything seems to work wonderful, but I have a problem.
Sometimes wm6.5 blocks everything and I have to make a soft reset.
After that, wm6.5 doesn't restart for a few seconds.
Subsequently my Polaris makes a Hard Reset by itself, without any kind of request or intervention.
Someone can help me?
Thank you very much!!
its a bug in some of the builds. please talk about this in your ROM thread
This is what happend to me! exactly with this kernel and after some time I even couldn't turn on this device, it'was like a dead no screen. After 5h without battery it again started but after that again freeze, so now I installed original http://www.htc.com/www/SupportDownload.aspx?p_id=59&cat=2&dl_id=113
But it restart themself during loading, so now I am solving what to do probably I will try install ROM from SD card. But this is 2 issue, I don't know if there is som corelation between them, but first is that phone seems like that and need rest for start, now it I am nearly sure that it's HW problem and 2nd is bad OS.
But anyway I am trying to ask if you have similar experience, because my case start exactly same as yours, but now ends in real hell
EDIT: I definitelly had Kostas too, but I think that WM6.1
EDIT2: Can you send your S/N number, it's weird beacause friend which sold me this phone told me that phone was working 1y absolutelly OK and now around same date as you happend something similar, that's weird, or you have new phone?
Thanks anyway!
I flashed the original ROM and than Kostas' ROM. Now everything is ok!
I'm sorry I can't help you.
Bye
what you mean under original? I am pretty confused from so many versions now, can you give me link?
Have you used the correct radio?
I've installed an Italian Rom wm6.5 and I've had to install Radio 1.59 before install the ROM, then it's better to install an original ROM like this:
RUU_Polaris_HKCSL_WWE_3.19.831.3_radio_sign_25.85. 30.07_1.59.42.15_Ship
Daniele
From Kostas Rom Page:
Radio not included.You must use any 1.59.xx.xx version.(1.59.46.12 is the latest and recomended.)
general guidelines;
certain application is not working (particularly camera) -> change your radio
system unstable, random freezes -> hard reset
hard reset cannot solve the problem -> flash stock rom, then reflash custom rom, then hard reset.