The story: Received an new O2 XDA NEO from Germany. Being portuguese I don't know nothing of german idiom. I dowloded the JAMIN Eng. rom from the FTP and tryed to unstall this rom. With the ROMUpadte utility that comes with the ROM I get an error. With the ROM Update Utility_NOID the process stars and go normally until 95%. Here, after some minutes give me an error saying I can't upagrade with the NBF file.
I was a little passed out thinking that instead a phone I had a brick. Pul out the batery for moments. After I turned on the phone and it shows the tri color scren of bootloader. Ok conect the usb cable again and start the upgrade to the RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID. and voila... the process completed without problems.
The weird thing is why my phone doesn't accept the JAMIN rom?
Anyone has an expplanation for that? Thank you
can you tell me wehere i can download a jamin rom ? then i can test it with my o2 xda neo
I upgraded my Neo to jamin rom without a problem. I was using the RomUpdateUtility by machinagod, which you can find in this forum. But now I have switched to RUU_2151327..._DOP_ASIA_WWE too. To me, the new version DOP_ASIA_WWE rom works much better than that jamin. More fast, more effective. The JAMIN always runs out memories and makes the CE-Star chinese input inactive, especially when WiFi used. The DOP_ASIA rom rarely meets such problem.
Upgrade rom
You can only upgrade rom but can not downgrade. So now you are at 2.15
but Jamin is at 2.13.
Hi,
upgraded qtek s200 with RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe, using ROMUpdateUtility-NoVendorID.zip, which does not check Vendor ID.
No major issues so far. During boot dispays Dopod instead of QTEK .
Besides, few differences I found in voice diler and new program called AutoConfig. Appears, to configure automatic settings for your GSM carrier, but only for ASIAN operators, which is useless to me. No worries, interface still English.
It was mentioned few times in this forum, that you may experience some "delays" during flashing your device - don't panic, don't touch it, just wait for some time, it will finish on its own.
Good luck with upgrades.
de yl1wc
when i upgrade [loading rom] WM6 version "FantasticMobiz_v1.1i" my battery crash down.....
then i charge battery .... and start o2
i got to bootloader with screening ....
RUU
IPL 2.15.001
SPL 2.20.001
USB
... then i decided to load original ROM "RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship"
at 80% of loading it will stop at 1 minute with red strip then continue to 95% and then again stopped with error : Invalid Command : this rom is not for this pda
this type of error usually not occurs.......
this error code have solution....
go to customer service center and get new flash rom code....
but i don't know that what is new code rom.....
Can anyone help me.....
email : [email protected]
test with a nvid rom
checked..,.
i checked with NVID ROM
still have same problem....
you gotta remove the IPL/SPL for NVID,as the rom has the IPL/SPL installer itself..
the solution is:
recook the NVID ROM.
how? :
visit www.molski.biz
then look for "cook your own ROM".
the instructions are out there.
there is nothing but Radio Rom Problem.... solved
hi guy,
i solved this problem....
so thread is close...d.
thanks for suggestion.
Hi snggwt
How did you solved, could you explain us, I am having the same problem.
thnx
hi, i have a g3 prophet with ipl ver. 1.00 and spl ver. 1.00.0000
i've just upgraded to pdaviet 4.0.0.4 PV and everything works flawlessly. however, due to wifi connections dropping i upgraded my phone's radio firmware from 1.13 to 2.19, the known version without bug with the pdaviet firmware.
installation is flawless but now my prophet can not boot , i just shows the dopod screen and resets continuosly. please help
i tried reupgrading with the newer radio version, but the installer said that it can not install, eventhough i have put my prophet in the three colour screen (bootloader) help me
You tried to restore old radio to phone , if not .
TOLD me ! i help u !
i dont have the old radio installer, it is 1.13 and can't find it anywhere.
also, i tried to upgrade to newer radioand reinstall rom, but the installer can not recognize my dopod, altough i have put it in the bootloader screen and connect it via usb.
it says error [300], invalid update tool. i have tried the 2.69 radio, 2.19 radio, and even the AKU 2.2 installer, and all of them return the same message.
please help
I try to update my dopod to WM 6 using PDAVIET ROM
But now the device stuck at start up screen..
IPL 2.20
SPL 1. 00.0000
GSM 01.13.20
OS 2.20.7.34
Can anyone tell me what should I do
Thanx
re-flash your PDA with official WM 5 ROM and try antoher WM 6 ROM, you can find it here:
http://forum.xda-developers.com/showthread.php?t=310452
Just follow exact steps!!!
BTW, did you just connect your PDA to PC and start upgrade????
I want to upgrade my good old Magician from ROM 2.03 TX WWE to the new Windows Mobile 6.1. But it doesn´t work. Tried also to downgrade to 1.13 ROM (with no extended ROM) but had no success. Has anybody any idea what can i do to get 6.1 to work on the Magician? That would be great !!!
Thanks for your interest and i hope someone has a solution for me!
greetings from Germany
Hubie53
I have the same Problem. But it's not just that I can't upgrade to 6.1... I can't do anything. I tried to get different Roms on my Magician. The original Rom too...but nothing works. All that since I tried the 2.03TX Rom... The 2.03TX is working nice at the moment but I would prefer the original one or WM6.1 Please help!!!
I had no problem switching between tx and 6.1 - both directions.
The only thing I had to be aware of is the radio version. 2.03tx doesn't install it's own radio and last cotulla rom requires radio 1.12.
my O2 mini can't upgrade any WM6.1 ROM. It's 64MB RAM and 64MB flash.
phamhien said:
my O2 mini can't upgrade any WM6.1 ROM. It's 64MB RAM and 64MB flash.
Click to expand...
Click to collapse
Check following 3 points:
1. Make sure your device is a "Magician"
2. Make sure the downloaded ROM is one of Cotullas WM6.1 (O1 , O2 or O3)
3. Befor flashing make sure the Radio on the Magician is version 1.12
Yes, it is a Magician, the ROM is Cotulla´s 6.1 Beta 7 (03), and my Radio is 1.12. But my PC says no USB! A problem with Vista, perhaps?
Flashing the Magician on a Vista PC does not work, this is a very old stuff.
Use a PC with XP-Pro and everything will be fine.
targets said:
Flashing the Magician on a Vista PC does not work, this is a very old stuff.
Use a PC with XP-Pro and everything will be fine.
Click to expand...
Click to collapse
I have xp, and many problems with connect magican to the pc in bootloader.
maybe i can change bootloader or reload it? where i can get some bootloader to the magican?
sory for my english (im from polish)
kamillo-s said:
I have xp, and many problems with connect magican to the pc in bootloader.
maybe i can change bootloader or reload it? where i can get some bootloader to the magican?
sory for my english (im from polish)
Click to expand...
Click to collapse
Maybe you have a problem with your PC, maybe you are doing wrong, or maybe your Magician is corrupted.
I don't know much about the bootloader, guess it is on his own chip and not changeable at this time, otherwhise it could be a part of the rom but i have never seen a Magician bootloader-file for itselfs.
hubie53 said:
Yes, it is a Magician, the ROM is Cotulla´s 6.1 Beta 7 (03), and my Radio is 1.12. But my PC says no USB! A problem with Vista, perhaps?
Click to expand...
Click to collapse
try to change the usb port to another....
or make sure u have the newest activesync...
Thanks for your help! i 've upgrade succesed for my magican!
I try update on other magican, and was succesfuly. I think I cant update rom after instaling 2.03 tx that something was broken or its something wrong witch magicans software. I have this same model of magican ,and other rom, and I can flash it.
same same here
i had the same problem with my magician i think it happens with some devices not all of them i couldn't find any way yet to solve it.
WM 6.1 for Magician-a fake?
Managed to flash my device with Windows XP. Works fine, thanks to all helpers!!!
dead.....!!!!
wiuh,my services i-mate jam dead after upgrading.
i got in bootloader mode n upgrade radio rom to 1.12 use this rom NL_11300_131_11200.exe.
i deleted nk.nbf, and ms_.nbf, so just radio.nbf
upgrade success!
then i try to upgrade with the same rom(NL_11300_131_11200.exe) without radio.nbf. fail it say error id country.ok then i try the other rom.
JAM_WWE_11200_128_11210_ship.exe
i deleted just radio.nbf,because i just want to upgrade the rom.
at ext rom upgrade it success.but when maybe about 30% uprade rom,it fail. and say error.i forgot the error.
and my i-mate dead. :'(
if i put usb cable n open the back case(baterai still in side or not) the lamp red is on.
but when i closed the back case.it turned off.
nothing happen,no indicated the pda was still connected.activesync has no sound.usb on device manager didnt indicated there was a pda connection.
so??
what must i do now?
??? this is not mine.if mine i dont care too much,but this my costumers!
anyone can help pls!
i beg u.pls!
learnig said:
wiuh,my services i-mate jam dead after upgrading.
i got in bootloader mode n upgrade radio rom to 1.12 use this rom NL_11300_131_11200.exe.
i deleted nk.nbf, and ms_.nbf, so just radio.nbf
upgrade success!
then i try to upgrade with the same rom(NL_11300_131_11200.exe) without radio.nbf. fail it say error id country.ok then i try the other rom.
JAM_WWE_11200_128_11210_ship.exe
i deleted just radio.nbf,because i just want to upgrade the rom.
at ext rom upgrade it success.but when maybe about 30% uprade rom,it fail. and say error.i forgot the error.
and my i-mate dead. :'(
if i put usb cable n open the back case(baterai still in side or not) the lamp red is on.
but when i closed the back case.it turned off.
nothing happen,no indicated the pda was still connected.activesync has no sound.usb on device manager didnt indicated there was a pda connection.
so??
what must i do now?
??? this is not mine.if mine i dont care too much,but this my costumers!
anyone can help pls!
i beg u.pls!
Click to expand...
Click to collapse
thx the problem was solved.thx
hubie53 said:
I want to upgrade my good old Magician from ROM 2.03 TX WWE to the new Windows Mobile 6.1. But it doesn´t work. Tried also to downgrade to 1.13 ROM (with no extended ROM) but had no success. Has anybody any idea what can i do to get 6.1 to work on the Magician? That would be great !!!
Thanks for your interest and i hope someone has a solution for me!
greetings from Germany
Hubie53
Click to expand...
Click to collapse
i Have flash my jam with 2.03 TX WWE and then downgrade to original i mat jam
after a month i flashed it again and can't downgrade or upgrade or do anything for 1 1/2 year
i tray many things like sd flash and many roms but it didn't work
may be Mr.Cotulla have a solution for it or any one have it share it to us
the only thing we can made is to inter the boot loader mode
Thanks