Cant Upgrade to 2.25 - Palm Treo 750

When I try to upgrade my device using the palm/att 2.25 exe it gives me an error message saying that i have an unsupported device.
Any Ideas?

Related

Boot screen says no gsm

Hello,
During a rom update of my mda compact my computer stopped.
After a reboot i tried to reinstall the rom and it fails.
I get the error 101 connection error or 150 not a valid update utility.
On my MDA i see a t-mobile screen with in the right down corner no gsm and D1.01.01 GER
Soft and hard resets have no result at all...
Anyone have a solution for this problem?
try to reinstall just another radio version
Best regs,Oleg
do you have any idea where to find the good radio version for my german mda compact?
i get the error 150: rom upgrade utility error when i try radio rom 1.11 when i try lower or higher versions i get the 101 cannot connect error....
anyone an answer?

no radio-stack after rom-upgrade

Hi!
It's the first time I'm posting here, but after some days of search, I've found a lot about upgrading / downgrading, but nothing about my problem.
I've an MDAcompact / T-Mobile PM10A / Austria and tried to upgrade to BigStorage-Rom according this thread: " Magician to 1.13 + 1.13 Radio + BigStorage ALL-IN-ONE Guide ". I've backed up my original Rom, but after the flash, there was no radio-stack at all (booting device: "no GSM" on display).
I've tried to update the radio-stack again - error message: 114 - error upgrading radio-stack, the same with 1.12 and 1.13. I've tried to downgrade the rom to 1.12 - ok, but no radio-stack. I've tried to restore the original Rom via SD-card in bootloader-mode - device says: not allowed.
Can anyone help me?
Thanks in advance!
did u try to use an origional rom? i mean a non Bigstorage rom upgrade ? because that should fix the problem ( atleast i think it shoud)
Try Downloading the origional t-mobile1.13 rom and upgrade ur device using that install file . If i am not mistaken the first thing that is upgraded is ur radio stack then the extended rom and finally the operating sytem ( if u upgraded u would see that it does it in 3 steps).
I've tried that. As soon, as I upgraded to the original rom from T-Mobile, it stopped at the radiostack-upgrade. After that, I opened the "original".exe-file from T-Mobile with winrar and tried to upgrade again, but without the "radio.nbf"-file, what was no problem. After that, I tried to update with the "radio.nbf"-file (stand alone) again, but the "error 114"-statement came up again.
I got this error before, but only because I flashed my device with the wrong ROM.
(...I once misread "Universal" as a meaning and not as a device codename, and flashed the wrong Radio stack. Thing worked, but radio invalid, no phone capabilities. Fortunately, a reflash with the correct radio ROM found here saved me. And my $300 investment. -.-)
Either the radio part of the ROM's accidentially corrupted (download again), or the radio driver is incompatible with your device hardware. I'm not aware of Minis being avaliable in anything other than GSM tho...
I downloaded the original rom-version from the official T-Mobile website. Fact was: up/downgrade of the rom itself "ms_.nbf/nk.nbf" no problem (I've extracted the exe-file via winrar to a folder and made that several times to up/downgrade), but update of the radio-stack "radio_.nbf" not possible, ended in error 114. The point is: as soon as I start the update-utility, it shows the "Device CE Image version", "Device Extended Image Version" but no "Device Radio Image Version", it looks like no radio-stack is installed at all.
I got that exact same error through the aforementioned Universal ROM debacle (-.-). Radio failed to flash, no radio at all.
There should be a standalone radio stack somewhere in the FTP for magician. I know I saved mine with the 1.12.00 version. Try flashing with that, there's a file inside that allows you to bypass the version detection IIRC (which allows a from-scratch flash). Flashing a standalone radio stack will hard reset your system, but otherwise will not touch anything else.

I need an expert here, its different this time, Stuck in bootloader..

Hey guys, i was upgrading the new NEW LvsW Edition: RUU_Prophet_220734_2207114_024721 (AKU2.3) when I got stuck in the process of upgrading in the Dos screen. I had to restart my device. After that it would not load after the splash screen. I did a reset again and tried to upgrade to the Original WWE Qtec rom. At 95% it stops and gives me an error that a newer NBF file is necessary. What do i do?
Try to update with "new NEW LvsW Edition: RUU_Prophet_220734_2207114_024721 (AKU2.3)"
I am struggling with the same problem here. I can get it back to life with upgrading os gsm extensions only. But then i can not make phonecalls and not sync with active sync. Also during boor GSM version is not shown. I gave up i am going to send it back to the Oange repair centre in Holland
Edit:
I tried all the roms available. Getting allways the same error; ERROR [326]
imparator said:
I tried all the roms available. Getting allways the same error; ERROR [326]
Click to expand...
Click to collapse
Is your set G3 or G4 and if G3 is it CID locked or Not?
exxi said:
Hey guys, i was upgrading the new NEW LvsW Edition: RUU_Prophet_220734_2207114_024721 (AKU2.3) when I got stuck in the process of upgrading in the Dos screen. I had to restart my device. After that it would not load after the splash screen. I did a reset again and tried to upgrade to the Original WWE Qtec rom. At 95% it stops and gives me an error that a newer NBF file is necessary. What do i do?
Click to expand...
Click to collapse
try going to this ROM using the no ID utility upater I think it's in this folder
extract all the files in RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe to one folder and then replace the ROMUpdateUtility-NoVendorID.zip to the olde folder, and then run it and update the ROM

M500 brick

Brother in law got a m500 with the original uk ornage rom on it. He downloaded an ornage upgrade from oranch.ch and started the upgrade process IN VISTA.
It went into bootloader mode and then came up with an error message.
When it resets now it goes through all the setup and installs all the software and customisations and then crashes back into bootloader mode.
we have tried all sorts of combinations now using my xp computer:
Using no_id with orange.ch rom, qtek, imate, tmobile rom, with USB on and off and also the tmobile radio upgrade too.
THe closest we can get is country id error when upgrading a rom.
On the radio upgrade it hangs at 0% giving error 114
Anybody got any ideas?

ivalid update tool?

trying to update cingular 8125 to wm6 titanium, keeps on giving me this error message number 300 "invalid update tool", is there a way to upgrade it?
thanks
help anyone?

Categories

Resources