hi. i just had a question. is it just on my phone, or does everyone's htc touch cube slow down drastically after a fresh install of a rom? i mean, i've tried several roms that have the touch cube, like ocatvoi, black diamond, tnt, and in each one, after the fresh install the cube works really fast, however when i reboot the device, the cube begins to show lag. especially the media face of the cube. when you turn the cube it takes a second for the next face to show up and the transition isn't as smooth as it was before. i'm overclocked at 240mhz and this still happens. any help?
thanks for the help everyone....j/k. i figure it out. i installed the t-mobile rom, then octavoi's rom, and then the touch rom i wanted (TNT Touch) and now everything works fast. Not sure why it works that way after installing octavoi's but i'm not complaining. just thought i'd share that with everyone.
Related
Just interested in finding out how many people are using them just to show off, or if people are actually finding use for them?
These are my observations:
Cube- hard to master getting it to flip out with the finger, and sometimes gives a lot of false positives. And using it after pressing the softkey takes too long, I would rather use HButton or some other launcher.
Scrolling- again this is hard to master.. sometimes it would scroll up when i'm actually flicking downwards... works surprisingly well at times and i found myself flicking the screen on non-touch ROMs.
Today plugin- this is ofcourse useful. But it takes too much space, and i couldn't embed it within a tab in spb diary. Also, in landscape mode its too big and leaves very little room for other plugins.
i think the cube is a POS. i've never actually used it as its much easier to do the task without messing around with it. the today plugin gives pretty much all the functionality of the cube without having to flick up left and right. the only time i've used it is to show other people how much the iPhone sucks.
and i think scrolling is very helpful. makes one handed use even easier if used with smartskey. anything possible to not use the stylus is a huge time saver.
1. Cube - dont use it much - or maybe just to fidget around...
2. Scrolling - can't live without it now - takes a little while to master it, but have stopped using the scroll bars mostly now that i can flick and scroll.
3. Home Plugin - do use it quite a bit, mostly for shortcuts to programs, photo dialling, weather.
Is there a cab which just installs the scrolling on any wm6 rom? Installing the htc home plugin slows down the device if its not built into the rom..
Nah its a Pose... OK but thats the cube only.
The Today screen is ok, especially if you use ur fingernail.
Great to show off and then tell ppl that its running a 2 year old phone,
and then iMention that iMac's iPhone is a iCon and no big deal.(Ummm actually iPhone Sux but their Media side and Batt life is sweet.)
And to wait for iPhone 2.0.0.666.
Let the .666 flame war begin. ;D
sometimes i end up playing around with the cube cause i admire how cool it is, although it's a little slow. I mostly use the top 9. I got too many contacts to scroll and I don't go on web much.
Can't live with out the touch scrolling and today plugin, but you need little mastering, but it's not a big deal.
Cube is pretty useless to me. I built a ROM without it, but with the touch scrolling and Home plugin. Trying to rebuild another ROM without it also. I don't use it and would rather use the space for Voice Command.
Currently rocking nbd 8.3. Can't live without the scroll and home screen but the cube is a novelty that quickly wears off, IMHO.
Would love to see a ROM with touch scroll and HTC home but without cube and missed calls bug. Any chefs out there listening?
yoda6 said:
Currently rocking nbd 8.3. Can't live without the scroll and home screen but the cube is a novelty that quickly wears off, IMHO.
Would love to see a ROM with touch scroll and HTC home but without cube and missed calls bug. Any chefs out there listening?
Click to expand...
Click to collapse
You can try NBD 7.9 and just reassign the left softkey and you will have it
icezar said:
You can try NBD 7.9 and just reassign the left softkey and you will have it
Click to expand...
Click to collapse
Almost, unless I'm mistaken all NBD ROMs (and most WM6 ROMs in general) have the missed calls bug. Please correct me if I'm wrong.
No problem of missed calls in NBD 8.3
I personally couldn't do withouth the HTC Home and the finger scrolling.
As many here, the cube is really beautiful to see in motion, but quite useless...
yoda6 said:
Almost, unless I'm mistaken all NBD ROMs (and most WM6 ROMs in general) have the missed calls bug. Please correct me if I'm wrong.
Click to expand...
Click to collapse
NBD 7.x does not have the 1,2 sec missed call bug.
Hi guys,
I agree with everyone... Htc home and touchflo rocks!!
The cube is a nice visual and for showing off, but not realy usefull.
Only if i havent set the IE launcher on the home plug i use the cube to launch it.
gr. bram
icezar said:
NBD 7.x does not have the 1,2 sec missed call bug.
Click to expand...
Click to collapse
Really? I'm talking about the problem where the GPRS is connected and an incoming call that is not answered before the calling party hangs up does not register as a missed call. NBD 8.3 certainly does this, although I'm thinking of trying the 2.19 UK radio to see if that helps.
I use cube time to time, bt is very nice thing. iphone contacts are the best and i use them daily.No button activation is not for me.
I got the touch installed on my second MDA which I use just for GPS. It's good for showing off. No useful functionality.
What's this scrolling business? Are you guys talking about the volume side thing? Or is there another way?
where is this touch scrolling from? I've flashed a few touch roms in the past monthish but none with the ability to scroll with my finger outside of contacts
Changed my mind from an earlier post.
Touch scrolling is awesome. Now that there is a version of the Home plugin works on TMobile its great to get the weather. Also, now that the Cube can come up via a finger swipe, it is actually useful (not required). Also, changing the links on the app side of the cube is needed because most of the default ones are already mapped to a hardware button.
Hello guys. I've tried many touch roms and I still have problems flicking the screen to scroll towards the direction I want. Is there any way to tweak the biotouch scroll settings?
Thanks
Is there no one who is facing the same problem as me in using Touch Scrolling? Or at least is there any tips in using it?
Thanks
I think the max you can do is to increase screen sensitivity so that it responds to your touch more often than not
i've had the same problem with many roms.
and the only thing i've found is that some do work a little better than others, so, just trial and error my friend.
The Black Diamond 2 Touch is the best I've found in any ROM, blazingly quick.
Hi,
I have a very strange problem... I have a german MDA Vario IV (Raphael) and I recently flashed ROMEOS 1.12, then HTC StockROM and after a couple of days it first happened, that my camera viewfinder is completely black. The camera, however, works, i.e. it takes pictures which I can view in the album.
When I tap the screen in camera mode, I see the 3 symbols, but when I tap the preferences-wheel, nothing happens.
When Romeos 1.40 (German) came out, I flashed it - and I still have the problem. I don't quite understand it, as it worked first with the HTC Rom and after about 14days it stopped working.
Do you have any help?
I just had the same problem. Fixed by doing a hard reset...
did you flash a new radio?
I just registered to report this same issue.
I just picked up my fuze today, and was going through the steps in the noob guide before I decided to stop and just let the phone install the regular software so I could at least activate it before a new bill kicked in before the account got cancelled.
Right before I stopped going through the noob guide, I got as far as doing a soft reset right before the installing ATT bloatware and was removing some options in the guide and restarting. Then, since I just wanted to activate the phone (I had no SD card to safely try out all the steps in the noob guide, and wanted to wait for it), I did a hard reset.
After I activated my phone, I've been trying out my camera and it just shows a black screen. If I touch the screen the three buttons show up and clicking on the buttons don't do anything. Though, if I hold the enter key it clicks and takes a picture which shows up in my album.
I'm going to wait till my SD card comes in before I do another hard reset to do the install again. Hopefully the hard reset fixes the issue.
Still no one else with this issue? I have flashed NATF 4.5 as well as energy 2.0 . I have changed to two different radios and this problem has persisted. Everything works fine at first, but then within a couple of days it goes black. Everything is exactly as others have reported. Pictures take, the touch screen menus work ( selecting any setting ).... its just the viewfinder that is acting goofy. Soft resetting it will occasionally make it work again. It makes me feel as though some of us have some software somewhere that isnt acting as it should. I googled the issue to no avail.
Any gurus able to shed some light on this matter?
Currently running:
HardSpl 1.9
EnergyRom 2.0
Radio 1.02.25.32
I am running Shep's 3.0 rom with the new 1.12.25.19 radio and I have just recently had this viewfinder problem arise as well. I am about to flash Shep's new 3F and will check the camera after hard reset.
Is anyone running additional programs when this arises? I had thought there was a conflict with freecaddie as I was on the golf course when I noticed the problem but maybe this is more widespread?
KSS said:
I am running Shep's 3.0 rom with the new 1.12.25.19 radio and I have just recently had this viewfinder problem arise as well. I am about to flash Shep's new 3F and will check the camera after hard reset.
Is anyone running additional programs when this arises? I had thought there was a conflict with freecaddie as I was on the golf course when I noticed the problem but maybe this is more widespread?
Click to expand...
Click to collapse
It must be as I dont play freecaddy. I can post all of the addons I have used...maybe theres something in common?
Ok heres the list
Ageye G-Alarm ( Which isnt working correctly anyway as it plays the WM alarm and not my MP3 )
Coreplayer
WMWifiRouter
MS Livesearch ( Preinstalled )
ShapeServices IM +
Skyfire
Skype
TomTom7
Any of these similar ?
pyraxiate said:
It must be as I dont play freecaddy. I can post all of the addons I have used...maybe theres something in common?
Ok heres the list
Ageye G-Alarm ( Which isnt working correctly anyway as it plays the WM alarm and not my MP3 )
Coreplayer
WMWifiRouter
MS Livesearch ( Preinstalled )
ShapeServices IM +
Skyfire
Skype
TomTom7
Any of these similar ?
Click to expand...
Click to collapse
Of the programs you listed, Skyfire is the only one I am also running. I just completed my flash and turned the camera on prior to installing any apps, cabs, etc... and the viewfinder worked fine.
I am in the process of adding my customizations back on, doing a PIM restore, and installing cabs and will edit my post later to report whether it continues to function correctly.
After setting things up the way I like them and a full day of use, the viewfinder still works fine. I am baffled as to the cause but as long as its works I won't complain.
To those still having the problem, I would recommend a hard reset at a minimum or perhaps try a new rom.
KSS said:
After setting things up the way I like them and a full day of use, the viewfinder still works fine. I am baffled as to the cause but as long as its works I won't complain.
To those still having the problem, I would recommend a hard reset at a minimum or perhaps try a new rom.
Click to expand...
Click to collapse
This was an issue with RRE's roms a while back. Not sure what he did to fix it but I know he tweaked a flashed new versions about 100 times in one day! I would post the question in your respective rom's threads and see if the cooks have a better idea. I would bet that there is a file or setting common to all of the roms listed here that is causing the problem.
Im running the stock rom in a 1 1/2 month old Fuze
The Black screen happens to me, if too much sunlight gets thru on superfine settings. (i hold it facing directly into the sun) It seems to blow out the picture (goes all white) -then theres no display at all (black) unless i exit camera and restart.
Camera viewfinder is black
Hi,
there is a fix for this on the htc asia site, if you go to the support tab and look at the downloads for touchpro, I am not sure its for all phone as it asked for my serial number and told me it was not for my phone, on this site at least it seemed to be for hong kong, singapore & china, Perhaps check the htc site for your location.
Good Luck
A|C
First, I want to thank everyone on this forum for being so active and dedicated! I can say without doubt that you guys are the main reason I chose the Fuze as my new smartphone.
I just got my Fuze yesterday, and it was working great (if a bit laggy) on the stock rom. I then installed hardSPL and ' ROMeOS conFUZEd AT&T edition' without any problems. But shortly after that, I noticed that the colors started acting strangely. It almost looks like when you're running windows in 256 bit color mode. There are no smooth gradients. But even more strangely, these color 'bands' rapidly shift around, making most of my screen appear as though it's flickering.
I tried Da_G's latest rom, then went back to the stock rom and stock SPL. But this didn't fix it. I tried taking a screenshot of it with CapScrUtil, but when I view the images on my computer they look fine.
This all leads me to believe it's a hardware problem and I should take it back, but it is kind of suspicious that it started after flashing the rom. Just checking if you guys have any suggestions.
Thanks!
Hi Guys,
I just got a HD2 yesterday and installed CMYLXGO's Stock Desire HD2 build on it. Everything seems to be working nicely, but I've had one instance where it rebooted when I tried to wake it from sleep and another just now where the keypad lights up when I tried to wake it from sleep, but the screen doesn't turn on at all.
Unfortunately, I don't have enough post count to post in the actual build thread, so I was wondering if anyone here could provide some assistance.
Thanks!
I do like this CMYLXGO rom also, I flashed 1.17 lite edition on HD2 WWE, all went well. My problem is I have only 40 MB left on my internal disk (ROM). I used 285MB recovery as advised. I think the app2sd is not work well. I replaced with Frankenstine Droid v1.1 and all went well. I do like sense keyboard comparing to generic android keyboard. Sense keyboard is very comfortable to move the cursor up-down, right-left without touching the text area