Related
Faria and NTS seem to know this...
How do we get the extended rom to automatically run on Crossbow? I've searched Google and others and haven't found a thing. Is it a reg. setting or what?
jwzg said:
Faria and NTS seem to know this...
How do we get the extended rom to automatically run on Crossbow? I've searched Google and others and haven't found a thing. Is it a reg. setting or what?
Click to expand...
Click to collapse
Ok, you have an autorun.exe in the windows directory, and a config.txt file in the windows directory. The config.txt is the same as it was in WM5 just a location change. Have all your lines point to \extended_rom\ and youll be fine
Wrong thread I know - but I looked all over the place and can't seem to find the definitive answer ... so here goes - am I correct in assuming that it's possible to delete the contents of ext_rom once you've used them? I guess that they are only for installing into the "real" storage, and just as long as you don't need them following a hard reset, they are just taking up some space .. am I correct?
I'm working with orwell's. Those files aren't there, so what has to happen?
radiotrib said:
Wrong thread I know - but I looked all over the place and can't seem to find the definitive answer ... so here goes - am I correct in assuming that it's possible to delete the contents of ext_rom once you've used them? I guess that they are only for installing into the "real" storage, and just as long as you don't need them following a hard reset, they are just taking up some space .. am I correct?
Click to expand...
Click to collapse
No. In AKU 2.x and above, the extended rom partition is locked and cannot be written to and cannot have files deleted.
jwzg said:
I'm working with orwell's. Those files aren't there, so what has to happen?
Click to expand...
Click to collapse
If you are on orwells, you need to do it the WM5 way from what I understand.
nottoosmart said:
If you are on orwells, you need to do it the WM5 way from what I understand.
Click to expand...
Click to collapse
I'm not too smart either...can you give instructions?
In the system hive, (default.hv) you should have:
[HKEY_LOCAL_MACHINE\Comm]
"TurnRadioFlag"=dword:0
"AutoRunCFG"="\\Extended_ROM\\config.txt"
"AutoRun"="\\Extended_ROM\\autorun.exe"
Most of the WM6 ROMs are missing the last two keys, thus the Autorun of the Extended_ROM is disabled by default.
eluth said:
In the system hive, (default.hv) you should have:
[HKEY_LOCAL_MACHINE\Comm]
"TurnRadioFlag"=dword:0
"AutoRunCFG"="\\Extended_ROM\\config.txt"
"AutoRun"="\\Extended_ROM\\autorun.exe"
Most of the WM6 ROMs are missing the last two keys, thus the Autorun of the Extended_ROM is disabled by default.
Click to expand...
Click to collapse
in all honesty, you are wrong. Even if those lines are there, for some reason the checkautorun still looks in the windows directory for the config file and the autorun file. I have searched the whole default.hv and still cant figure out why. You figure it out and ill give you a cookie.
hi there,
As you will guess by my question and post count i am a fully fledged n00b and have just bought the o2 xda orbit.
It such a great forum and enjoying reading all these mod's however there is one slight problem...
...how do you add them all?! i can obviously download all the files etc to my desktop (PC) but how do i then get them to install and work on my xda? e.g. quickgps mod, emulators, themes etc?
i imagine its very easy to answer and thanks in advance
just sync ur pda to pc,some progs will require a simple click ,if this needs you to do more on the device it will prompt you
other will need transfering onto your memory card and activating from your pda
i used this method with trail and error
good luck buddy
yeah ive tried syncing it and it does connect but then unsure of where to put the files.
For example i have the file to update the quickgps to locate quicker. Its in a .arm file and inside that is one file which is quick~g.000. I dont know whether to put the .arm or .000 onto the xda and when i have found that out in which folder do it put it when on explore of the XDA through activesync?
Thanks for the reply.
massive help and all understood now. tried both cab and exe files and both work great, thanks alot
Chris
I love this forum. I have learn't so much so far, but still have a lot to learn. Epecially programming for WM. Anyway, on to the reason for posting this thread.
Since learning that I could flash from my microSD card thanks to the tutorial by renaming the *.nbh to KAISIMG.nbh and placing it in the root folder. I have been making custom 1st splash screens to flash remotely as well as making a directory on my microSd ("Flashing from MicroSD") and creating directories for original roms such as (\WM6 Originals\Alex\KAISIMG.nbh) or (\WM6.1\SleuthV3\KAISIMG.nbh), (I also have KAISIMG for just Radios under a different folder) so when I want to try a new rom, flash a different radio or splash, I can at anytime.
Here's the thing I love using the splash tools (maker and converter) and Rom Builder. But obviously you need a PC. Would anyone by able to recreate a mobile version of these tools so we could do most things (customisation wise) whilst we are mobile.
I.E. I want to make and flash a new splash whilst mobile from a *.jpg. I could use this program to convert to .bmp format needed, then convert to *.nb thsn to *.nbh. I could then use a file manager to rename to KAISIMG.nbh then place in microSD root folder and flash.
What you think? Would this be too hard to do? Anyone want more mobile control of your mobile customisation?
Other tools that could be ported would also help. I make the welcome.96.png with my mobile graphics problems.
Well for the moment I'll stick to making several themed splash into the KAISIMG.nbh to flash remotely (making sure you have enough battery mind/dont flash on 10% or something/I recommend over 10% for mobile flashing your splashes and over 50% for you WM Roms)
Got a collection of around 19 Slide out Keyboard sounds inc Knightrider, Thundercats, Xbox 360 boot sound and others. When I have a couple more made I'll post my Sliding keyboard Sounds.cab if anybody wants it over the next Couple of days. (Some sounds gathered from other users share i.e. Mario etc)
Thanks anyway. Feel free to post your views and look forward to seeing if anyone is up to this challenge..
for ever an xda padawan (as no-one ever knows everything)
diigibio
You pose interesting questions, if you don't get much here, I'd try dropping those ideas into the Development and Hacking forum and see what they think. That's usually where the new programs come from.
And yes, I would at least like to see some funky sounds added to the list of things I put on my Kaiser...
( OMG...Jarek91 didn't have anything snarky to say )
Sound .cab v1 (Keyboard Slideout)
Tried to upload my .cab in both .cab and .zip formats and are well below the file size limits but forum keeps saying failed *.cab or *.zip
Any idea's??
diigiobio
I'd say try a 4shared account or talk to alltheway or HDStreetGlide about tossing it on their 4shared accounts. That seems to be the current way of getting the larger files out there unless you want to use RapidShare or MegaUpload.
diigibio said:
Tried to upload my .cab in both .cab and .zip formats and are well below the file size limits but forum keeps saying failed *.cab or *.zip
Any idea's??
diigiobio
Click to expand...
Click to collapse
You can host your file at either rapidshare or Megaupload or others out there.
Sound .cab v1 (Keyboard Slideout)
Thanks guy's. Here is the first version:
http://rapidshare.com/files/95651751/diigibio_19_V1.cab
Enjoy..
Got Loads more to come!!
diigibio
jarek91 said:
( OMG...Jarek91 didn't have anything snarky to say )
Click to expand...
Click to collapse
I was thinking the same thing.
But then I realized that you always leave a calling card with your signature on it.
jarek91 said:
I'd say try a 4shared account or talk to alltheway or HDStreetGlide about tossing it on their 4shared accounts. That seems to be the current way of getting the larger files out there unless you want to use RapidShare or MegaUpload.
Click to expand...
Click to collapse
I feel left out....
P1Tater said:
I feel left out....
Click to expand...
Click to collapse
(and you wonder why I had nothing snarky to say? ) Just kidding...I certainly left you out and I have no idea why other than the voices in my head told me to.
P1Tater said:
I feel left out....
Click to expand...
Click to collapse
Here is something interesting so you do not feel left out.
http://subfighter.com/fighters.php?op=ListEvent&eventid=265
-McMex
diigibio said:
Thanks guy's. Here is the first version:
http://rapidshare.com/files/95651751/diigibio_19_V1.cab
Enjoy..
Got Loads more to come!!
diigibio
Click to expand...
Click to collapse
Error
The file could not be found. Please check the download link.
mathew18 said:
Error
The file could not be found. Please check the download link.
Click to expand...
Click to collapse
I got to say you are an idiot.... I could not stop myself from posting a response to your stupid request. Over a year DEAD post!? what is wrong with you people?
Mods... Please Delete this post entirely.... has no value and all links are dead and there is no need for it to consume realestate space on this site.
Thank you....
As promised, here are Just2Clean's kitchen files. You will need to use either JustClean's EasyBakeOven or Bepe's kitchen in order to use them. Just download either of the kitchens, delete the OEM and SYS folders and replace them with these.
This does NOT include my micro Extended ROM, but if you've flashed my ROM, you already have it installed.
Linky It's the Working_Folder
sorry still kinda new to all this ROM cooking...
So this is a newer build of the OS?
I the just2clean kitchen you released I want to keep all those packages I have in there so all i have to do is add the files from this OEM folder to that one and replace the sys folder... am I right?
Thanks. I will try to cast some magic with this
(for personal use, of course )
macaraballojr said:
sorry still kinda new to all this ROM cooking...
So this is a newer build of the OS?
I the just2clean kitchen you released I want to keep all those packages I have in there so all i have to do is add the files from this OEM folder to that one and replace the sys folder... am I right?
Click to expand...
Click to collapse
This is not my newest build, this is the Just2Clean that I had already released. If you want to get a newer build, search for EasyPortOven 2.2 and use that to port over the ROM. It will change the ROM, though, as the SYS folder has been optimized. You'll learn more about this in one of my upcoming cooking lessons.
awsome!.... Do you know more or less when you will be comming out with this lesson?
Again Thank you for all ur help and work... You Rock dude!
macaraballojr said:
awsome!.... Do you know more or less when you will be comming out with this lesson?
Again Thank you for all ur help and work... You Rock dude!
Click to expand...
Click to collapse
Well, you have to follow all my lessons first, in order to understand the whole process, so keep studying my lessons as they come and the ones I have already released and you'll be ok.
ivanmmj said:
Well, you have to follow all my lessons first, in order to understand the whole process, so keep studying my lessons as they come and the ones I have already released and you'll be ok.
Click to expand...
Click to collapse
What would we do without u bro but many thanks for the info
hmm well old kitchen still works but when i replace files with that attached ive got problem with running buildos (its building temp but after a while its giving up and show problem with buildos (windows dialog) and then with buildxip...)
old kitchen works. i also tried to use a fresh upacked version. its just not working for me...
ive reinstalled all frameworks, c+ and its not helping.. even if i not mod anything its just dont work ;/
(i have unpacked to good folder and old configuration (5.2.19199) still works fine. i'm having badsectors but this cannot be the problem right now..)
i need some help.. or there is some newer version of easybakeoven? (using still beta2...)
slimag said:
hmm well old kitchen still works but when i replace files with that attached ive got problem with running buildos (its building temp but after a while its giving up and show problem with buildos (windows dialog) and then with buildxip...)
old kitchen works. i also tried to use a fresh upacked version. its just not working for me...
ive reinstalled all frameworks, c+ and its not helping.. even if i not mod anything its just dont work ;/
(i have unpacked to good folder and old configuration (5.2.19199) still works fine. i'm having badsectors but this cannot be the problem right now..)
i need some help.. or there is some newer version of easybakeoven? (using still beta2...)
Click to expand...
Click to collapse
One of the packages you chose is probably not compatible with Just2Clean. To make it compatible, read the error and it will tell you. If a duplicate file is found, delete the extra file from the OEM folder or the SYS folder.
when i put the OEM and SYS folder from the Just2Clean in the working folder of the Kitchen, the Kitchen won't even start up.
- reinstall of VC -> no start up.
- mixing of old and new OEM and SYS -> no start up.
- using the old oem and sys -> all works great
Ghostrider
i cant choose any package and i'm using ONLY oem and sys from working folder.7z!
old kitchen works great but i cant use these files. same as GhostRider.
need help..
Ghostrider said:
when i put the OEM and SYS folder from the Just2Clean in the working folder of the Kitchen, the Kitchen won't even start up.
- reinstall of VC -> no start up.
- mixing of old and new OEM and SYS -> no start up.
- using the old oem and sys -> all works great
Ghostrider
Click to expand...
Click to collapse
What do you mean by not start up. There are MANY files and batch files and programs that work together as a kitchen. You'll have to be more specific. Perhaps a screenshot of what happens.
slimag said:
i cant choose any package and i'm using ONLY oem and sys from working folder.7z!
old kitchen works great but i cant use these files. same as GhostRider.
need help..
Click to expand...
Click to collapse
You can't choose packages because the packages are all stored in the OEM folder. I forgot to mention that. Don't delete the OEM folder, just the folders in the OEM folder have the same name as the files in the other new OEM folder...
when I put the new files in the OEM and SYS Folder it say's BuildOS.exe don't work anymore, The Program has an Problem, and must be Closed.
Then the same with Buildxip.exe don't work anymore.
Ghostrider
That means that there's a conflicting name on an RGU, DSM, or inside an option.xml. If you do not go through BuildOS, Buildxip will crash because it will not have something to build in the first place, as it's BuildOS's job to get the files where they need to be.
i'm sorry but you are treating us (me and Ghostrider) like an idiots.. i'm quite sure that problem is with the package.
you write clearly "delete oem and sys and replace them" when i do this - same thing as on Ghostriders screenshots happens.
slimag said:
i'm sorry but you are treating us (me and Ghostrider) like an idiots.. i'm quite sure that problem is with the package.
you write clearly "delete oem and sys and replace them" when i do this - same thing as on Ghostriders screenshots happens.
Click to expand...
Click to collapse
I'm sorry if I insulted you, but I don't see how I treated you like idiots.
All I've done is ask you questions to get a better idea of what's going on. It works on my end, but it doesn't on your end. I can't magically know what's going on without asking questions. I'm sorry if you felt insulted by my questions. It was never my intent. I just wanted to ask questions to find out why it wasn't working on your end so I could help fix it. I just rememebered something, too. Just before I packed it up I was messing around with something... look for the OEM packages that have both an UPX version and a non-UPX version. I THINK that one I uploaded may have one. If it does, one of the packages may have duplicate RGU's and DSM's. If it does, keep the one that starts with A and delete the pair that starts with Z. Also you can delete the UPX version of that package altogether. Tell me if that works.
ivanmmj said:
I'm sorry if I insulted you, but I don't see how I treated you like idiots.
All I've done is ask you questions to get a better idea of what's going on. It works on my end, but it doesn't on your end. I can't magically know what's going on without asking questions. I'm sorry if you felt insulted by my questions. It was never my intent. I just wanted to ask questions to find out why it wasn't working on your end so I could help fix it. I just rememebered something, too. Just before I packed it up I was messing around with something... look for the OEM packages that have both an UPX version and a non-UPX version. I THINK that one I uploaded may have one. If it does, one of the packages may have duplicate RGU's and DSM's. If it does, keep the one that starts with A and delete the pair that starts with Z. Also you can delete the UPX version of that package altogether. Tell me if that works.
Click to expand...
Click to collapse
I don't felt me insulted
I'm testing this now.
Ghostrider
Edit:
I have Just2Clean and MMS 3.5.1.24.R2 as UPX and non UPX deleting the UPX version did't do it. I deleted both the UPX and non UPX version in the Kitchen files for Just2Clean, and now it is working.
I don't have the Just2Clean Customization
Ghostrider
Great to hear!
There should be a Just2Clean customization there also. It's labeled "Customization - Just2Clean."
I think what he meant is that Just2Clean customization packages don't work.
I did as you suggested by deleting the .rgu and .dsm starting with Z, but that still didn't work.
The option XML file needed to be edited because it pointed to those Z files not the A files.
Not sure if just deleting the .dsm and .rgu starting with A would've worked because I didn't try that.
After deleting the UPXed packages everything works for me now.
Hi everybody? I am trying to find a solution to a issue with sasimi on the new 6.5.X roms (with the start button on the lower bar). The issue is that sashimi cant install cabs to storage card. I searched the web and foud some ideas that u need to hack the sashimi.mrsc file but none of them was working.
Can anybody who succeeded in runing sashimi post his workoround? That would really help me. Thanks ion advance.
Nobody here uses sashimi?
Hello
unpack attached and replace the file in \\SASHIMI\Program\Bin\SASHIMI.mscr
and it will work with Win 6.5.X
Man, I love you, thanks.
secoseco said:
Hello
unpack attached and replace the file in \\SASHIMI\Program\Bin\SASHIMI.mscr
and it will work with Win 6.5.X
Click to expand...
Click to collapse
Will it also still work with older winmo versions? Or does this break that functionality... thanks though! (Thinking of it, only using 6.5.x now anyway...)
dagrim1 said:
Will it also still work with older winmo versions? Or does this break that functionality... thanks though! (Thinking of it, only using 6.5.x now anyway...)
Click to expand...
Click to collapse
no it will not working with 6.5, first backup SASHIMI.mscr original first for using later with 6.5
secoseco said:
Hello
unpack attached and replace the file in \\SASHIMI\Program\Bin\SASHIMI.mscr
and it will work with Win 6.5.X
Click to expand...
Click to collapse
Faaaaaaaaaantastic, it works.
Now, is there a way to install cabs to the device as well. I have tried "device" and nothing for the ASL directory, but nothing installs.
I have the Autoinstall facility on my rom but am a bit dubious to have have Autoinstall and Sashimi both working after a re-rom.
steveianson said:
Faaaaaaaaaantastic, it works.
Now, is there a way to install cabs to the device as well. I have tried "device" and nothing for the ASL directory, but nothing installs.
I have the Autoinstall facility on my rom but am a bit dubious to have have Autoinstall and Sashimi both working after a re-rom.
Click to expand...
Click to collapse
you need to install Sashimi program once in you device to storage card
1- if you already install Sashimi.cab you will get SASHIMI folder in storage card
2- copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\
3-copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\SC\
3-copy reg files that you want to install in SASHIMI\Auto\REG\
and so on
after you upgrade your Leo or hardreset it, run Autorun.exe from SASHIMI\Program\2577\
and chose AUTO
secoseco said:
Hello
unpack attached and replace the file in \\SASHIMI\Program\Bin\SASHIMI.mscr
and it will work with Win 6.5.X
Click to expand...
Click to collapse
I'm so glad that it works again...
secoseco said:
Hello
unpack attached and replace the file in \\SASHIMI\Program\Bin\SASHIMI.mscr
and it will work with Win 6.5.X
Click to expand...
Click to collapse
I just replaced my SASHIMI.mcsr and it does fix files installed to the device memory but for cabs installed to the storage card, I have to still select storage card and hit 'OK'. Then I have to go to the Home menu and come back to SASHIMI before SASHIMI will carry on with the next cab (in which then I have to repeat the steps for all cabs to be installed to the SC).
Anyone know what could be wrong?
I'm running: Energy.RHODCDMA.23549.Sense2.5_with_Cookie_HomeTab.Mar.20.7z
on a TP2
Me too
It seems that the "SendSpecial ("Down")" is not working and the script may be hanging on the command, or something like that. You don't see the selection change, so it could also be the "SendSpecial("Space")" not working. Either way, the "SendSpecial("LeftSoft")" just after is obviously not firing. Not sure why it's different now, but it apparently is. There used to be a "SendSpecial("CR")" instead of the "SendSpecial("Space")", so I'll try that to see if it's working again (worked in win6.1, not in win6.5). Mine's been working just fine, up till the very latest Energy ROM on my CDMA TP2.
LightC said:
I just replaced my SASHIMI.mcsr and it does fix files installed to the device memory but for cabs installed to the storage card, I have to still select storage card and hit 'OK'. Then I have to go to the Home menu and come back to SASHIMI before SASHIMI will carry on with the next cab (in which then I have to repeat the steps for all cabs to be installed to the SC).
Anyone know what could be wrong?
I'm running: Energy.RHODCDMA.23549.Sense2.5_with_Cookie_HomeTab.Mar.20.7z
on a TP2
Click to expand...
Click to collapse
I think it connected to the roms u are using. For me it worked with one rom, then I flashed other rom and I experencied the same thing as you.
sorry to ask, but so far I have no clue about Sashimi but would like to use it and read therefore as much as I could.
Is point 3 a typo?
>3-copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\SC\
shouldn´t it be:
3-copy cab's programs that you want to install in Storage Card to SASHIMI\Auto\cab\SC\
Sorry to ask maybe the obvious but for a newbie it is helping to sort out missunderstanding.
Best regards,
dingolino
secoseco said:
you need to install Sashimi program once in you device to storage card
1- if you already install Sashimi.cab you will get SASHIMI folder in storage card
2- copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\
3-copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\SC\
3-copy reg files that you want to install in SASHIMI\Auto\REG\
and so on
after you upgrade your Leo or hardreset it, run Autorun.exe from SASHIMI\Program\2577\
and chose AUTO
Click to expand...
Click to collapse
dingolino said:
sorry to ask, but so far I have no clue about Sashimi but would like to use it and read therefore as much as I could.
Is point 3 a typo?
>3-copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\SC\
shouldn´t it be:
3-copy cab's programs that you want to install in Storage Card to SASHIMI\Auto\cab\SC\
Sorry to ask maybe the obvious but for a newbie it is helping to sort out missunderstanding.
Best regards,
dingolino
Click to expand...
Click to collapse
You're right there off course
I am having no luck with the v8.0 of Sashimi. I have the Artemis ROM (WinMo v. 6.5.5).
Auto mode only installs cabs from cab/ASL folder. I replaced the Sashimi.mscr with the one posted in this thread but to no avail.
Do you guys have any suggestions?
me too,
sashimi doesnt install (not works) for new artemis v7. It install all my cabs from auto/SC to device becasue it can not move cursore down anymore..
any suggestions?
I also had a problem with cabs not auto installing onto my Storage Card, instead they were installing to My Device. I have been doing some hunting around for the solution and i think i have managed to find it. (its worked for me anyway).
Go to SASHIMI > Program > Bin, BACKUP SASHIMI.mscr and then replace with the one i have attached. I am no coder so please don't ask me about specifics, there were just some hashes added to the beginning of a couple of lines of code. Like i say it worked for me, so hopefully it will work for you Let us know if it works for you. Cheers.
I'm surprised that either of the attachments on this thread works on HD2 Leo. I found that there is a very basic problem with mortscript and all sashimi scripts will hang. Two symptoms:
1) if not in flight mode, sometimes hangs during initialisation
2) if auto install to storage card, will hang (leaving you to select the radio button and press install)
and there is no easy cure.
padlad said:
I also had a problem with cabs not auto installing onto my Storage Card, instead they were installing to My Device. I have been doing some hunting around for the solution and i think i have managed to find it. (its worked for me anyway).
Go to SASHIMI > Program > Bin, BACKUP SASHIMI.mscr and then replace with the one i have attached. I am no coder so please don't ask me about specifics, there were just some hashes added to the beginning of a couple of lines of code. Like i say it worked for me, so hopefully it will work for you Let us know if it works for you. Cheers.
Click to expand...
Click to collapse
thx m8,
i will try it
i'm on wm 6.5.x and sashimi stalls at SASHIMI INITIALIZATION COMPLETE.... HEEEEELP!