Need some help with bootloader problem :( - Tilt, TyTN II, MDA Vario III Windows Mobile ROM De

Hey guys ive been trying to fix my problem for hours and cant seem to figure out what is wrong. I try to flash and get stuck at 1% the the connection is lost apparently. Im stuck on bootloader with:
KAIS1*0 MFG
SPL-1.0 OliPof
CPLD-8
I am trying to restore my ATT Tilt to factory settings again using RUU_Kaiser_CINGULAR_WWE_ . I can get back to the OS using MTTY but it doesnt help the same crap keeps happening. Ive also tried to use HardSPL with no luck. Im new to flashing this phone so I may have screwed up somewhere. Any help would be appreciated. Thanks in advance.
PS - When "Updating rom" screen ( the % bar) pops up after the device goes to bootload the usb connection is lost for some reason during most rom flashes... any ideas?

Related

Orange SPV M600 (HTC Prophet) Stuck in Bootloader

Guys,
I wonder if you can help. I have trawled this and many other forums and found many people that are having problems with their HTC Prophet or variations of the same device.
I have the Orange SPV M600, it was in my pocket and when I took it out to turn it on, it was displaying the bootloader screen after seemingly soft resetting itself. It is displaying the tri-colour bootloader with the following IPL/SPL
- IPL 2.10.0001 - SPL 2.10.0001
I have tried the following things that I have found in the forums:
1. Taking the battery out for 10 minutes ~ Still the same.
2. Hard Reset ~ I get the "Press SEND button to factory restore" message
but nothing happens when I push the call button.
3. Reflashing the ROM ~ I am unable to do this. I only have Vista and
WMDC does not see the phone in bootloader mode.
Is the phone dead? If so how could this have happened?
If anyone could help I would be eternally greatful. Oh and to add another complication the phone is still CID Locked
Thanks in advance
Barry
well if you where is south africa i would of helped you im sure if you have it runing on xp it will work my jamin did the same and all i did was push the camera button and reseted it got into tri colour mode and reflashed it
sorry that i could not help you but like i said if you in SA we could of tried it on my mashine
Any progress ?
did you ever get this sorted out ? Surely all you're gonna need is a PC with XP and active sync....
If I was closer you could have sent the phone to me and I would have had a go at reflashing the rom, but I'm at the other end of the country....
Hello guy here is a solution to flash under vista i have too a orange m600 and it works fine
http://www.modaco.com/RUU-Vista-done-u-t252977.html
help stuck on the bootlader screen?
guyz i have a jamin.. my cousin was flashin it and flashed the wrong software.. if i reset the phone it shows the boat loader screen!! and i cnat do anythin..caz u tell me which slftware to flash..and how to do it?? My freind told me all solution to my problem's will be solved here
hopin i will get my solution
First of all, download the NVID (no vender) AKU2.2 from here. http://rapidshare.com/files/17208693/RUU_Prophet_220734_2207114_024721_NVID.exe
Then, open activesync, select connection settings and UNCHECK the connect through USB option.
Then run the NVID file. It will take a while, and may seem to get stuck at 80% or 95%. Just leave it alone.
When that's done, you can either use it as it is, or load anyother ROM you want.
i have a bit similar problem
can some one plese guide me how to flash it with xp?????
Regards
First get a version of ActiveSync, any will do, but more recent is probably better. Then download the ROM (see above). In ActiveSync>Connection Settings uncheck the Connect through USB option. Then connect the Prophet.
Next Unzip the NVID file, and run RUU_PROPHET... This will flash your Prophet with a very basic ROM. If you then want to upgrade to a different ROM follow these steps: http://forum.xda-developers.com/showthread.php?t=310452

spl-1.93.0000

Hi
Been searching through posts but couldn't find anything relating to the following hence this topic...I been trying to flash wm6.1 to this device...i had dutty's rtm 4 installed, but decided to upgrade to 6.1, however when i follow the flashing procedure (copy JumpSPL1.56-KAIS.exe to device n run it) it either gets stuck, and gives me a 262 error code then i get the tri-colour boot screen and only flashing to RUU_Kaiser_HK_WWE_1.82.721.1_radio_sign_22.51.88.13_1.27.15.32R2_Ship.exe gets the phone working again...otherwise im stuck with a tri-colour screen...when i do get stuck...i get the following on the tri-colour screen kais130
spl-1.93.0000
cpld-8
thanks
Z
so i am not the only one
to give you a little compensation you can put a new rom by using the sd
method
http://forum.xda-developers.com/showthread.php?t=336158
but please someone help
the answer isn't anywhere here cause i searched a lot
so i read wikis threads but no answer
also i can't change radios like that
Why would you jump_spl, Unless it was to solve the Hardspl issue?
Hard_Spl is the semi-permanent spl you need for flashing roms.

Palm Treo 750, stuck in bootloader ROM flashing not working

I had to hard reset my palm, as it was stuck at windows screen. It had WM6.
Now it does not go beyond bootloader screen.
Tried, the following
1. Palm recovery tool, connection gets lost
2. Tried ROM flashing with the WM6 ROM (CHEEIMG.nbh) with 2GB Mini SD card with FAT 32 formatting, does not progress, it gets stuck no progress even after one hour.
Not sure what to do next, any help is greatly appreciated.
Hi mohaninusa2003, looks like your waiting for a reply since a while. Here you will find all the answers connected to your issue. Probably you did already but just incase have the link
http://forum.xda-developers.com/showthread.php?t=366771
Thanks hammod2k, I have tried all the suggestions on the thread. Still when flashing the original rom, it does not go beyond Bootloader -ok hans at GSM, left overnight for flashing, still not working.
Tried Mtty, set 14 0/ task 28 55aa /
Tried to flash Hard SPL, bit it is not successful, I am getting an error "Image file is corrupted".
I will keep searching threads and reading..in the meantime.
recovery tool
my friend where i can find the recovery tool? i been looking for it but nothing even on the palm suuport page? thanks in advance
regards from lima
mohaninusa2003 said:
I had to hard reset my palm, as it was stuck at windows screen. It had WM6.
Now it does not go beyond bootloader screen.
Tried, the following
1. Palm recovery tool, connection gets lost
2. Tried ROM flashing with the WM6 ROM (CHEEIMG.nbh) with 2GB Mini SD card with FAT 32 formatting, does not progress, it gets stuck no progress even after one hour.
Not sure what to do next, any help is greatly appreciated.
Click to expand...
Click to collapse
stuck on boot loader
hey mohaninusa2003..
I exactly have the same problem bro..it hangs up on gsm...i tried removing my card and hard resetting it but it just brings me to a tricolored screen red green and blue with the word serial at the bottom...tried soft reset but still the same thing..hope someone could help us on this
Hey fguimet,
Please follow the link and look at post 9 for the file,use the Desptop update method file and extract using winrar to get th file you are looking for. hope it helps,
http://forum.xda-developers.com/showthread.php?p=1714416
Sorry to bother but i have a few questions...i have a 750 treo and none of the support on this website is helping...i am trying to flash my palm 750 but its says the file is corrupted..what do i do about that? Progress only reaches 7% ive used cheetah and kaiser unlockers and i was also wondering if it can be flashed just using the computer and usb in booter mode since it wont go past the palm splash screen...i can access my treo using mtty but doing task 2a doesnt do anything either... I think that maybe my phone is screwed up. I appreciate any help you can offer.
I have almost the same problem with my Palm 750 that I believe locked to Rogers.
1. It hangs on GSM if I use SD card ROM file CHEEIMG.nbh . I have tried many different CHEEIMG.nbh files (ATT, Cingular, ROW…)
2. Running CheetahUnlocker will crush at 7%, and my Palm 750 will reboot and freeze at MS Mobile screen.
I have the same problem, and I think we have to change the IPL and after run cheatunlock.
How can we do it?
on my treo I have hard-spl'd but still i cant manage to flash a rom
My Bootloader screen results:
CHEE100
IPL - 0.20
CHEE100
SPL - 1.40.0liNex
______________________
it starts, gets to about 4-7% and then it says:
|00018003
|CHEEIMG.nbh - FAIL
|
|OS - Fail
|
|
|
|Update Terminate
|UPDATE FAIL
i have no idea what i am doing wrong
it all started when i tried to flash a wm 6.5 os and it didnt work... i was just randomly stuck on the bootloader screen
Swarford

kaiser after unlock with black screen

hi, guys, i tried to unlock a kaiser with htc all unlock 1.2, and in the pass number 3, show me an error, and put the screen black, when i conect to sync, it shows conected, but the screen is black, if i pull out and in the battery, and turn on, shows the att and 3g logos, and then again the screen turns black.
please if somebody can help me, i'm new with htc, but it shows this:
KAIS1*0 MFG
SPL-1.0.Olipof
CPLD-8
Thanks in advance for you help.
it is getting worst, i did a hard reset, and now when i conect to my computer, ask me for "generic rndis drivers", last time i solve this from the phone, but now it has black screen.
Please i need yor help.
thanks.
cellshop2 said:
hi, guys, i tried to unlock a kaiser with htc all unlock 1.2, and in the pass number 3, show me an error, and put the screen black, when i conect to sync, it shows conected, but the screen is black, if i pull out and in the battery, and turn on, shows the att and 3g logos, and then again the screen turns black.
please if somebody can help me, i'm new with htc, but it shows this:
KAIS1*0 MFG
SPL-1.0.Olipof
CPLD-8
Thanks in advance for you help.
it is getting worst, i did a hard reset, and now when i conect to my computer, ask me for "generic rndis drivers", last time i solve this from the phone, but now it has black screen.
Please i need yor help.
thanks.
Click to expand...
Click to collapse
You have a patched Radio on your device that was put on to unlock it. Unfortunately the Radio is incompatible with your rom which is giving you the black screen. Do you know if you have WM6.0 or WM6.1? If you do then you can just flash a compatible Radio back onto your device via microSD Card.
The simplest thing if you dont know what Rom you are using and dont have any user information on your phone that you need to keep, or if you already have it backed up is to goto my Flashing Your First Rom Guide, upgrade your HardSPL using step3 (Flashing via MicroSD Card) and then flash a WM6.1 Rom using step5. Once you have upgraded your Rom you should have no problem using step4 to unlock your device if you want to. Just remember to flash back a WM6.1 Radio (step6) after it has completed.
What is "htc all unlock 1.2".
I can't find that tool on xda-developers.
Dave
DaveShaw said:
What is "Flashing via MicroSD Card".
I can't find that tool on xda-developers.
Dave
Click to expand...
Click to collapse
Dave what did I tell you about following me around lol
mskip said:
Dave what did I tell you about following me around lol
Click to expand...
Click to collapse
LOL
Yeah, sound's like a new radio flash will sort it out.
Why use a Unlocker off one forum and ask for help on another? There are 3 Kaiser unlockers on here All of which are really easy to use and work perfectly (or we know howto fix when they go wrong).
Ta
Dave
Turn's out your using Olipro's unlocker.
Just that the bastards on the other site didn't credit him for it
@OP - Please see this thread for more help - http://forum.xda-developers.com/showthread.php?t=375583
Ta
Dave

Qtek S200 G3, flashed with G4 , please heelp!

So here's the deal, I have a Qtek S200, stuck in tri-color screen.
The screen says IPL 2.10, SPL 2.20.0001.
I have been told that this is a G4 device that was flashed with a G4 IPL.
Any number of flashing tools I use tells me Invalid tool, file open, error etc etc.
It appears that my device is toast.
IS there a way to revive this little beauty>?
Please say yes
noonas said:
So here's the deal, I have a Qtek S200, stuck in tri-color screen.
The screen says IPL 2.10, SPL 2.20.0001.
I have been told that this is a G4 device that was flashed with a G4 IPL.
Any number of flashing tools I use tells me Invalid tool, file open, error etc etc.
It appears that my device is toast.
IS there a way to revive this little beauty>?
Please say yes
Click to expand...
Click to collapse
Anybody? Please? I have read the WIKI, the lazy guides, they all result in the same.
noonas said:
Anybody? Please? I have read the WIKI, the lazy guides, they all result in the same.
Click to expand...
Click to collapse
Oh and also I was told the Oipro had a solution , but since PM and other ways to contact, no response.
Anyone knows of a way?
noonas said:
Oh and also I was told the Oipro had a solution , but since PM and other ways to contact, no response.
Anyone knows of a way?
Click to expand...
Click to collapse
Not ready to give up on this , please someone please...
puhleeze? Helehehehellp me?!
noonas said:
puhleeze? Helehehehellp me?!
Click to expand...
Click to collapse
Echo,,, echo echo echo.. hello, hello hello....
you can't flash a g3 with g4 upgrader. the program don't allow you to do this..
if your spl / ip is like x.xx.0001 is a g4 if is x.xx.0000 is a g3
you can instal a g3 update on bootloader (the 3 colors screen)
just connect to usb port and start the program/try with novendor update. ( the program not the ms dos)
marar said:
you can't flash a g3 with g4 upgrader. the program don't allow you to do this..
if your spl / ip is like x.xx.0001 is a g4 if is x.xx.0000 is a g3
you can instal a g3 update on bootloader (the 3 colors screen)
just connect to usb port and start the program/try with novendor update. ( the program not the ms dos)
Click to expand...
Click to collapse
So in Tri-color screen it says the following:
IPL 2.10
SPL 2.20.0001, this should make it a G4 chip then.
On to do the NVID update now...
Ok downloaded the Upgrade_HardSPL_G4 tool and ran it.
It went rather quickly and ended in a completely green screen
att he top it says:
IPL 2.10
SPL 2.20.0001
Will do some more attempts.
noonas said:
So in Tri-color screen it says the following:
IPL 2.10
SPL 2.20.0001, this should make it a G4 chip then.
On to do the NVID update now...
Ok downloaded the Upgrade_HardSPL_G4 tool and ran it.
It went rather quickly and ended in a completely green screen
att he top it says:
IPL 2.10
SPL 2.20.0001
Will do some more attempts.
Click to expand...
Click to collapse
So I downloaded Prophet Shadow 2.0 rom and ran the G4 upgrade RUU.
During the flashing progress the Bar on the Phone whent RED a couple of times, it eventually went to 100% (being red for about a minute), once the flash completed the phone rebooted in to the sam old tri-color screen again,.
What do to now??
*bricked*
did you try to recover the device yet by flashing a NVID ROM before flashing a cooked rom? try downgrading it first before hardSPL.. let me find links for you to read..
http://forum.xda-developers.com/showthread.php?t=310452
follow this link very very carefully..
marekPLPH said:
did you try to recover the device yet by flashing a NVID ROM before flashing a cooked rom? try downgrading it first before hardSPL.. let me find links for you to read..
http://forum.xda-developers.com/showthread.php?t=310452
follow this link very very carefully..
Click to expand...
Click to collapse
Downloaded the Prophet's 2.20.7.34_2.20_7114_02.69.21 Rom
Launched the G4 RUU, and I get Error 260 Update Error ;(
/Jonas
*EDIT*
Bad USB Cable (Oups), I flashed the G4 completely (again the progress bar on the phone goes red at times and then green again) once completed it reboots to the same BootSplash (Tri-color) screen without any difference.
/Jonas
did you tried the other USB ports at the rear end of your CPU??
did you tried the recovery prcedures stated on the files i gave you to read?
if you have followed those there should be no problem bro..
try reading them back again and this time carefully...
and before flashing remove battery.. make sure its charged 50% or more... return battery, do hard reset when its on boot loader try connecting USB make sure you see a USB sign on the lower left of your screen... when RUU starts check the upper right corner of the screen of your phone if theres an RUU sign < optional, its just like a USB sign on the lower left of screen>
your phone should work if all procedures have been done...
marekPLPH said:
did you tried the other USB ports at the rear end of your CPU??
did you tried the recovery prcedures stated on the files i gave you to read?
if you have followed those there should be no problem bro..
try reading them back again and this time carefully...
and before flashing remove battery.. make sure its charged 50% or more... return battery, do hard reset when its on boot loader try connecting USB make sure you see a USB sign on the lower left of your screen... when RUU starts check the upper right corner of the screen of your phone if theres an RUU sign < optional, its just like a USB sign on the lower left of screen>
your phone should work if all procedures have been done...
Click to expand...
Click to collapse
Well this 'ol PZ I have only have one USB port. I have another PZ but is Vista.
I leave the phone on USB Charge over night so it should have enough juice.
I will go back and re-read the instructions, but this is not my first HTC device... but I may have missed something.
noonas said:
Well this 'ol PZ I have only have one USB port. I have another PZ but is Vista.
I leave the phone on USB Charge over night so it should have enough juice.
I will go back and re-read the instructions, but this is not my first HTC device... but I may have missed something.
Click to expand...
Click to collapse
Status report.
Downloaded the file as referred to in the post.
Once I run it, it stops at 80% RED bar on the phone.
On the PC (RUU 2.5.2) it says the following:
Error 326: Invalid Command
This NBF file cannot be used for your PDA phone. Please check your NBF file
What now?
goja67 said:
Download Prophet_PV_Temp and you will fiks it.
Click to expand...
Click to collapse
Thanks for the tip, I downloaded this ROM, ran the G4 RUU file.
It went through (again with a red bar at times on the device).
The PC said it all went successfully, and the phone reboots to tri-color screen again, SPL and IPL still the same.. DAMN!!
Any other suggestions or should I just declare it bricked?
If your device is G4 , try this RUU:
http://www.mediafire.com/download.php?yjzwtd4yybt
Hope it'll fix your device as it did for mine .
thangkls said:
If your device is G4 , try this RUU:
http://www.mediafire.com/download.php?yjzwtd4yybt
Hope it'll fix your device as it did for mine .
Click to expand...
Click to collapse
About 80% in I get "INAVLID COMMAND"
Hi,
I have the same problem. My imate was G3 ( I learn it after appyling the G4 batch ) I need to recover process and files from G4 to G3. I tried to recover by RUU_Prophet_220734_2207114_024721_NVID.exe (novendor)
But, On the PC (RUU 2.5.2) it says the following:
Error 326: Invalid Command
This NBF file cannot be used for your PDA phone. Please check your NBF file
Do you have any solutiun or idea???
Hi guys...
Well Here's my story....
I was an Universal guy for about 5 years, and now I find myself stuck with a Prophet....
Don't take me wrong, I realy loved my Uni, and the prophet seems a good phone...
So after using it for a few days, I came back to this forum, and entered the prophet world...
Without spending the minimum time needed to search and learn how to properly upgrade the phone, or even tp know if it was a G3 or G4, I downloaded and flashed my prophet with a new ROM...
All went fine, and I got stuck in the bootloader screen, for about an hour... Then I finally found out how to properly HardReset the device, and now....
Well,... now I'm stuck in the splash "Inovation" screen and nomatter what I do, I just can't enter the bootloader....
After readding a bit...yah I know I should have done that before, and not after... I realize that my battery may be the culprit for not entering bootloader and so I plugged it in to the wall charger...NO charging light came on...
I know I don't need to write the next few words, but here they go...
HELP!!! PLEASE!!!
EDIT:
I needed the SIM card in my prophet, so I took it out, and also took the SD card...
Then I decided to re-try entering the bootloader...and....SUCCESS!!!
Now doing the RIGHT procedures to upgrade my prophet...

Categories

Resources