Database Info

Need MMS settings for T-Mobile USA

I can not find the MMS settings for USA that work. I always says unable to sync.

Search My friend Search...
http://forum.xda-developers.com/showthread.php?t=298222

rlonnborg said:
I can not find the MMS settings for USA that work. I always says unable to sync.
Click to expand...
Click to collapse
Not only are they in the forum, they are on TMobile's website (with the exception of the correct IP address...figures) but the correction is in the WIKI. There are CABS available also in the FTP directory. *sigh* as Projectile says: search.
--M

ok go to settings>connections>MY ISP add new connection and then wen it askes for for connection name put edge or w.e u want then modem make it cell GPRS then access point put internet2.voicestream.com and your done

with ArcSoft....
server name: tmobile mms
Gateway: 216.155.165.50
Port: 8080
Server address: http://216.155.174.84/servlets/mms
Connect via: The Internet
Sending limit: 300k
WAP version: WAP 2.0
then delete the other configurations under the server settings, and set tmobile mms as default...and ur set!

rlonnborg said:
I can not find the MMS settings for USA that work. I always says unable to sync.
Click to expand...
Click to collapse
If you are using the CAB issues by T-Mobile, please not they are not working properly with the latest version of ArcSoft MMS (3.5.x.x) cause the registry structure has been altered. The way the default profile is set has changed, so I had to tune the XML provisioning from T-Mo.
You can also fix it by going into the server tab of ArcSoft's settings and set T-Mobile as your default server manually - that should work.
Make sure GPRS is configured prior you setup MMS.
Hope this helps.
--eluth.

Da did that
I have already tried those setting and when I try to "SEND and RECEIVE" it shows on the bottom left corner "ERROR SYSYNCHRONIZING".

rlonnborg said:
I have already tried those setting and when I try to "SEND and RECEIVE" it shows on the bottom left corner "ERROR SYSYNCHRONIZING".
Click to expand...
Click to collapse
Which version of ROM and of the ArcSoft MMS software are you using?
--eluth.

CROSSBOW
2.18.0.0 Wwe
Rom Date 2/14/06
Radio 02.69.11
Protocol Version 4.1.13.30
Extrom Version Faria V5.0

All the settings listed above, arcsoft 3.5.1.17. Error Synchronizing as well.

Mms Version 3.5.1.17

rlonnborg said:
Mms Version 3.5.1.17
Click to expand...
Click to collapse
Please see my post http://cleanimport.xda/index.php?POSTs.
I posted my CABs for T-Mobile USA there.
Install both the GPRS and MMS cabs to get it working.
Regards,
--eluth.

MMS Settings for T-mobile USA
There is a big error in the gateway adress. For the last octet, it should be 50 and not 050.
It will work fine after that

SOLVED (w/screenshots): MMS vs. T-Mobile USA!
Details and screenshots at http://forum.xda-developers.com/showthread.php?p=1227020#post1227020, but here's the executive summary:
1. Type exactly "216.155.165.50", not "216.155.165.050"; and "http://216.155.174.84/servlets/mms" instead of "...174.084..."), i.e. no leading zeroes; and
2. After setting up MMS, click the power button until the device turns off (not just the screen; don't press and hold, just click and release; if you're sync'ed, you'll hear it disconnect). Repower to load the settings!!

Instant Messaging on USA MDA WM6

so i have decided to update to WM6 and everything is working great. i got MMS to work and im pretty happy with it. The only thing is that now my T-Mobile (USA) MDA no longer has the Instant Messaging program and i can no longer send IM's. How can i fix this? i tried to download agile messenger but for that to work i have to be within wi fi range. While earlier before upgrading to WM6 i was able to do it from anywhere i had signal. Please help, i would really like to be able to instant message.

killerkhatiby009 said:
so i have decided to update to WM6 and everything is working great. i got MMS to work and im pretty happy with it. The only thing is that now my T-Mobile (USA) MDA no longer has the Instant Messaging program and i can no longer send IM's. How can i fix this? i tried to download agile messenger but for that to work i have to be within wi fi range. While earlier before upgrading to WM6 i was able to do it from anywhere i had signal. Please help, i would really like to be able to instant message.
Click to expand...
Click to collapse
Heres What Ur Looking For Hope It Helps!

LiQuiD FrEeZe said:
Heres What Ur Looking For Hope It Helps!
Click to expand...
Click to collapse
thanks, i have been looking for this app too...

killerkhatiby009 said:
so i have decided to update to WM6 and everything is working great. i got MMS to work and im pretty happy with it. The only thing is that now my T-Mobile (USA) MDA no longer has the Instant Messaging program and i can no longer send IM's. How can i fix this? i tried to download agile messenger but for that to work i have to be within wi fi range. While earlier before upgrading to WM6 i was able to do it from anywhere i had signal. Please help, i would really like to be able to instant message.
Click to expand...
Click to collapse
agile messenger works with gprs as well as wifi. btw there is also IM+ for all services(ICQ, MSN, AOL, Yahoo, Google)

Thanks a ton for the program, but when i try to sign on it doesn't connect its just stays at the signing on screen also i always get this weird text message when im trying to sign on. and after a while it just says communication error check your settings. does anyone know how to do this? does this program not work with WM6 cause even with wi fi it won't connect.

keep trying to connect..i used to get that error

so your saying to just keep on connecting? every time i start to connect it always gives me this text message
WVIIRLI ST=(200,"succesful")
SI=1.1Ax4d4dd54e576d84bc25a2049227dbca55
CI=WW: oz4121#[email protected]
KA=60000

Sorry for double post, but i fixed it by instalilng it to the main memory instead of storage card, like i had earlier.

killerkhatiby009 said:
so your saying to just keep on connecting? every time i start to connect it always gives me this text message
WVIIRLI ST=(200,"succesful")
SI=1.1Ax4d4dd54e576d84bc25a2049227dbca55
CI=WW: oz4121#[email protected]
KA=60000
Click to expand...
Click to collapse
do i need a data plan for oz messenger to work as well. Cause i have done all of this and i still get the error message. it also establishes an edge connection when i try to connect. what is it doing if it uses mainly txt messages; would be lame if it uses data and text messages, must be why tmobile uses it i.e. rack up your bill by using expensive but non bandwidth intensive features

big000000 said:
do i need a data plan for oz messenger to work as well. Cause i have done all of this and i still get the error message. it also establishes an edge connection when i try to connect. what is it doing if it uses mainly txt messages; would be lame if it uses data and text messages, must be why tmobile uses it i.e. rack up your bill by using expensive but non bandwidth intensive features
Click to expand...
Click to collapse
Hi big, You do not need a data plan, you just need to make sure that you have the Cellular (GPRS) modem set up in your Connections settings. If I am not mistaken, it will use txt msgs and there is a little lag time the IM's.
Hope this helps.

Mms Not Working
Killer, how did you get those MMS working?

Intergalactic said:
Killer, how did you get those MMS working?
Click to expand...
Click to collapse
Go to Messaging >> Menu (right soft key) >> Options
Tap MMS then click the Servers tab
Click the New button and enter the following info:
Server Name: PictureMessaging
Gateway: 216.155.165.50
Port Number: 8080 (I've heard you could also use 9201 but i use 8080)
Server address: http://216.155.174.84/servlets/mms
Connect via: My ISP
Size: 300k (you might set this smaller)
WAP Version: WAP 2.0
Tap: OK
Select the PictureMessaging entry and set is as default by tapping the Set As Default button
Tap: OK

The_Wizard said:
Go to Messaging >> Menu (right soft key) >> Options
Tap MMS then click the Servers tab
Click the New button and enter the following info:
Server Name: PictureMessaging
Gateway: 216.155.165.50
Port Number: 8080 (I've heard you could also use 9201 but i use 8080)
Server address: http://216.155.174.84/servlets/mms
Connect via: My ISP
Size: 300k (you might set this smaller)
WAP Version: WAP 2.0
Tap: OK
Select the PictureMessaging entry and set is as default by tapping the Set As Default button
Tap: OK
Click to expand...
Click to collapse
,,,,,,,,,,,,,,,,,,,,,,,,,,

Liquid Freeze: Thank You Very Much I've Been Looking For This Dam App For So Long Thank You.

nobody know a rael setting 4 mms & internet

i've two device
c600 whith Windows Mobile 6 for Tornado Perfect English Edition Released
c600 whith WM6 For Tornado - HTC Edition
but i can not configure those devices in mms and iternet .
I want ask if somebody had found a simply road to make a configuration.
in italy is not work . many people ask this cab or those info but ...
many thanks andrea

making a cab Document!

This is the application (HP iPAQ DataConnect) from HP iPAQ 514 that sets the Internet/WAP/MMS settings for ALL operators around the world.
http://rapidshare.com/files/65992342/HP_iPAQ_Data_Connect_by_NiTroGen.cab
It's tested on my Tornado and it works fine!
Unfortunately it must be installed in \Windows directory and it's about 300 files, occupying a total of 2MB! Just install it, run it, select your Country and Operator and uninstall it to regain these 2MB.
Warning! After the installation, my system became unstable and I had to reboot. If it will happen to you, do not remove the battery, just turn off and on the phone to flash the filesystem cache. This instability is normal because there are a lot of small files installed making the filesystem cache crazy!!!!
If you get a "SIM Error" with DataConnect then run MMISyncApp and rerun DataConnect! I don't know why this happens, but that's how it is solved.
Yes, I know this app is a little pain in the a$$, but it surely works!

question
Does this work for tmobile ? I have sda with wm6.
Or does anyone know settings for tmobile I can get internet OR email to work simultaeously using GPRS.Thanks!

gumbyandpokie999 said:
Does this work for tmobile ? I have sda with wm6.
Or does anyone know settings for tmobile I can get internet OR email to work simultaeously using GPRS.Thanks!
Click to expand...
Click to collapse
What data plan do you have with T-Mobile?

tzones
bipinsen said:
What data plan do you have with T-Mobile?
Click to expand...
Click to collapse
I am using the tzones $5.99 .It does work but I have to keep going into connects to and changing WAP to Internet and back and forth to get email OR internet.Weird huh?

jus tried it the mms still dont work, my txt work anyways...but not mms

iky10 said:
jus tried it the mms still dont work, my txt work anyways...but not mms
Click to expand...
Click to collapse
Under MMS settings
1. Make sure Port is 8080 (default 80)
2. Make sure WAP version is WAP 2.0 (default 1.2)

it jus changed the settings it says error synchronzing...

O2 MMS settings

Just started getting a problem with the MMS on my Serra and not sure if anyone can let me know theirs please.
Under connections/My ISP I have
Mobile Web - Cellular Line (GPRS,3G), mobile.o2.co.uk, o2web/password, DNS 193.113.200.200, Alt DNS 193.113.200.201
Mobile Web 2 - Cellular Line, mobile.o2.co.uk, o2web/password, DNS 193.113.200.200, Alt DNS 193.113.200.201
My Work Network
02 Active - Cellular Line (GPRS, 3G), wap.o2.co.uk, o2wap/password, user server specific
MMS Settings
o2uk - Gateway 193.113.200.195 port 8080, server address http://mmsc.mms.o2.co.uk:8002. Connect via My ISP
Thanks

Sorry all fixed myself, my proxy settings were incorrect

What exactly was the error - I still cannot get MMS to work even with your seetings from your post?

I found out that mine was that a proxy server was enabled. I hook mine up to my laptop while in the office to charge and activesync with my Exchange server. Hadn't realised that it also enables my office proxy server.

crazyC, is the SIM in your Serra on O2 contract or Pay and Go? I'm guessing it's the former, but if it's the latter I know the settings...
Is it just MMS that's not working, or is your data connection (via telephone I mean) not working either?

It was just MMS that did not work.
I am on contract, and after a lot of digging and trialling of cabs that should have fixed it, but didn't, I have sussed it out and tested it.
I will roll the settings into my O2 setup cab, test it, and then post it if anyone wants it.

YES! Please post it.
I am using these settings on my contract o2, htc touch pro. all my 3g and internet works... just no mms.
I have sat here for four hours now messing around with it...
any chance of posting the settings that worked for you?

Try this
MMS Settings
o2uk - Gateway 193.113.200.195 port 9201, server address http://mmsc.mms.o2.co.uk:8002. Connect via My Work Network
Other connections as per the normal O2 set up.
'My Work Network' shows up as O2 Active
Dont forget to set the O2MMS server as the default under MMS options

I havent tested this yet, but this cab SHOULD insert the O2 MMS settings - note you must already have the correct O2 network setup for calls and data, this is just the MMS bit.

im also having prblems with this, using the new Elite RC4. Im gunna reflash it and try again cuz i have fiddled with the settings too much
Edit - i tried the cab and the setting listed above it and neither worked for me

I have called O2 to see if they can help me and they sent me the some lame ass intruction which are exactly the same as on here... except afte you set up the o2web settings it says to use auto download for the rest :/
Whats the deal witht he proxy for the o2 active settings are they supposed to be on or off and if on, what do i set them as?

Installed the original O2 ROM to get all the settings working properly. It seems the missing details are in the WAP Proxy ones.
start - settings - connections - connection settings - manage existing under the 'my work network' (or whatever you renamed it too) - proxy (ensure use proxy is ticked) - advanced
WAP - 193.113.200.195:9201
SECURE WAP - 193.113.200.195:9203
Other than that settings are as they have been mentioned previously

MMS issues
I have extensively searched forum after forum and this seems to be the only thread with the sort of info i am searching for. I have installed TPC V3.1 Rom With required radio, everything works including MMS, however, no matter what settings i try i cannot receive normal sized pictures and any MMS videos go straight to the O2 website and all i get is a message your phone is not compatible with this type of message. Can anyone help, its really annoying............
I have tried the above .cab file and it doesn't work for me either.
Thanks in advance for any help.
O2 serra (raphael) win6.5, TPC v3.1 radio 1.14.25.05

Kevfm said:
I have extensively searched forum after forum and this seems to be the only thread with the sort of info i am searching for. I have installed TPC V3.1 Rom With required radio, everything works including MMS, however, no matter what settings i try i cannot receive normal sized pictures and any MMS videos go straight to the O2 website and all i get is a message your phone is not compatible with this type of message. Can anyone help, its really annoying............
I have tried the above .cab file and it doesn't work for me either.
Thanks in advance for any help.
O2 serra (raphael) win6.5, TPC v3.1 radio 1.14.25.05
Click to expand...
Click to collapse
Try some of these reg edits.

Thanks, but that is more for increasing the send size limit of mms, I can send them fine, but my network O2 cannot determine what phone I have and therefore only allows me to receive the smallest possible sized attachement.
I have tried numerous settings and radios to adjust this I've even tried the get settings feature and I get a txt back sorry we are unable to blah blah blah. with out going back to O2 stock rom i'm running out of options.......
Also I have never attemped to edit the registry
Again thank u for your reply......
EDIT......
Attempted reg edit, has had no affect, am I doing something Wrong.......?

o2 mms size problems
crazyC said:
I havent tested this yet, but this cab SHOULD insert the O2 MMS settings - note you must already have the correct O2 network setup for calls and data, this is just the MMS bit.
Click to expand...
Click to collapse
Hi guys, I have entered all the settings found on here and my mobile web and mms work but the mms messages received are resized to a tiny default size as mentioned on here.
Any chanch of an idiots guide to edit the registry so that o2 think it's another phone allowing me to received full size pics.
My phone is a Vodaphone UK HTC Touch Pro2 with O2 Pay Monthly Sim.
Any help is appreciated

Verizon TP2 on ATT: MMS problem

I am using an unlocked Verizon tp2 stock rom on Att's network. I have got everything to work on ATT's network except for MMS. I can send mms messages to others but I cannot receive them. I used to not be able to download mms messages but I changed the mms settings from verizons to att's and it will actually download the message now. When I receive them though it just says "message not found". If anyone could help it would be greatly appreciated.

cloakinghalk said:
I am using an unlocked Verizon tp2 stock rom on Att's network. I have got everything to work on ATT's network except for MMS. I can send mms messages to others but I cannot receive them. I used to not be able to download mms messages but I changed the mms settings from verizons to att's and it will actually download the message now. When I receive them though it just says "message not found". If anyone could help it would be greatly appreciated.
Click to expand...
Click to collapse
Are you on a stock rom or custom rom? Whenever I flash my ROM I never get MMS to work until I tell the phone what to use for MMS. This requires registry editing which I can explain how to do if this is the case.

This is a stock rom. I had to registry edit to allow me to change the mms settings because before they were locked to verizon and there was no way to change them

daddylonglegs, Maybe you can tell me the registry edits you did and i can try that?

only if you no how to flash a custom rom
http://hotfile.com/dl/22460657/342b335/EnergyROM_21885_RHOD500_31.Dec.2009_StandardM2.5.rar.html. im using this custom rom and everything works great.

I just loaded the energy rom and and still no luck with mms. I am using mms server settings
* IP Adress: wireless.cingular.com
* Port number: 80
* Server address: http:// mmsc.cingular .com
* Send limit: 600K
* WAP Version: WAP 2.0
I also have a problem with bing not working with locate me. does that happen to you too?]

hollywood468 said:
. im using this custom rom and everything works great.
Click to expand...
Click to collapse
I tried to go to the site and it wouldnt download. What specific rom are you using? The only one I know of is ssk which I used but found to be slightly buggy. I too had an unlocked tp2 that is being used on att. I cannot get mms to work but like the stability of the 6.5 rom and would rather have a pretty basic one since I would not be up to tweaking it frequently

He is using Energy "Leo" 21885. I tried it and it didn't help mms. The rom was nice but had some bugs that annoyed me. I changed to JUICY ROM and it is really nice and stable. If your looking for stock then energy isn't really but Juicy is. I still haven't got mms to work but if you do let me know.

cloakinghalk said:
I am using an unlocked Verizon tp2 stock rom on Att's network. I have got everything to work on ATT's network except for MMS. I can send mms messages to others but I cannot receive them. I used to not be able to download mms messages but I changed the mms settings from verizons to att's and it will actually download the message now. When I receive them though it just says "message not found". If anyone could help it would be greatly appreciated.
Click to expand...
Click to collapse
I am having the same problem with my imagio. I have all of my mms settings. unblocked the server edit with arcsoft. can now send mms successfully but cannot receive. Any ideas anyone?

mms with att on verizon
go to ppcgeeks they have all the cdma stuff your looking for energy rom, mms fix, driver update, im dont have one problem. i love my verizon phone w/Tmobile service

AT&T is not CDMA. I have an Imagio and installed the AT&T WAP & MMS cab. Same problem: send is o.k. receive is "Message not found" I am using My Clean Imagio ROM (custom version with carrier provisioning [not turned on])

same problem here. changed all server settings but shouldnt the "connect via" be media net? thats not and option in the drop down for the cdma phones. is there a way to add this in? im thinking this would allow it to work? or has anybody found a solution for this yet? ive searching for days and havnt found any yet although iv seen people say theyve got it working but dont say how...

daddylonglegs said:
Are you on a stock rom or custom rom? Whenever I flash my ROM I never get MMS to work until I tell the phone what to use for MMS. This requires registry editing which I can explain how to do if this is the case.
Click to expand...
Click to collapse
I would like to know what registry editing are you doing. I have a vzw tp2 and cant get the mms to work. Any light shined on this would be great. Is there an arcsoft mms cab you installed over, a proxy enable/disable cab, manually add in medianet and configure it, manually add att mms settings?
please post your setttings and help us out.
thanks

MMS works perfectly on the stock rom. Do you have a custom rom?

im using energys manilla 2.5 leo rom. still havnt gotten this to work. has anyone got this going yet. ive been all over ppc geeks trying to figure this out. ive even got other members pm-ing me with the same problem. i know there has got to be a way for this to work.

Why is their no answer? How do you get mms and data to work when you have a verizon touch pro 2 and you are on att or t-mobile in the USA? And I mean with any stock rom?

I received my Imagio sim unlocked. I put in my AT&T sim card. I had to edit the GSM servers, and phone/data band choices to match AT&T. I have changed the registry for ServerEdit under ArcSoft. I have used the network wizard to set up AT&T. Just like everyone else, I can send MMS but cannot receive MMS. All other e-mail, SMS works fine. Is this a UAProf problem or is it an IMEI problem with the proxy server? I really don't know. I want to say this. T-Mobile folks are not having the problem as much. The problem is with Verizon unlocked (global) phones using AT&T sim cards. Does anyone have an idea if AT&T servers or software is blocking the MMS due to the phone not being recognized?

HEY EVERYBODY!!! i have stumbled across a temporary solution to this several months ago and had posted the link to the thread i started in several places but i guess i forgot this one!!! haha anyway, its over on ppcgeeks but my name is different over there. its luzboss. so if it helps you out please hit thanks or show you appreciate it!!! BTW, its a LOOOOOOONG postbuti tried to be as clear as possible about everything.
HERE IS THE ANSWER!!!!! -------> http://forum.ppcgeeks.com/showthread.php?t=120147&highlight=xyc+squeaky

cloakinghalk said:
I just loaded the energy rom and and still no luck with mms. I am using mms server settings
* IP Adress: wireless.cingular.com
* Port number: 80
* Server address: http:// mmsc.cingular .com
* Send limit: 600K
* WAP Version: WAP 2.0
I also have a problem with bing not working with locate me. does that happen to you too?]
Click to expand...
Click to collapse
what is your connect via on? if u set up internet and are able to use that then use media net

whats your user name for the post? I only care to read your post........ kewljay223