Yesterday i cleaned my application data\home, cause there where lots of themes i installed and didn´t use. I make a big mistake deleting the nomru.home.xml . This whas one of the Original Windows Mobile 6 themes. Googled a lot, but didn´t find a page to download this file.
So please, can someone upload this file for me ? It´s the one without the application shortcuts at the top.
Thousand thx in advance
Go to yours device \Windows directory with file explorer, unhide rom files, there is your missing file nomru.home.xml, just copy it to \Application Data\Home.
Use for example Resco Explorer.
Thank you man. I didn´t think that this was so easy.
Related
long version:
I've tried to use the solution in here for my blackstone in order to fix the arab-numbers issue on my ppc.
I've downloaded the tahoma.ttf and tahomabd.ttf files
rename the existing files to tahoma.ttf_old and tahomabd.ttf_old
I copied the files from the sd to the /windows folder and SRed the device.
all the hebrew fonts were screwed and blank squares were shown where normally the letter would be,
I got worried, so I checked the "/windows" forlder and I've noticed new files were created.
so now I have 3 versions of each file in the folder:
for tahoma:
tahoma.ttf (original, was created after the SR)
TAHOMA.TTF (the one I copied from the SD, yes, its the same name only the letters are in different case)
tahoma.ttf_old (the backup of the font including hebrew letters)
same goes for tahomabd.
renaming the tahoma.ttf or TAHOMA.TTF is not possible not from normal file explorer, not from resco file explorer and not from total commander (pocket-version), deleting the files didn't work as well ("can't delete file" or "can't rename file" error).
the font on quick dial was ok.
I've figured the problem was that the files were in use, so I've searched the folowing thread which changes the windows fonts folder, so I copied the new version to the /windows/fonts folder and changed the registry value...
it worked, I can see hebrew and normal numbers when the font is set to "right to left", but the fonts are in the wrong folder and I can't delete or rename the new files... which brings me to the...
short version:
how can I delete/rename (and then delete after SR) the "tahoma.ttf", "TAHOMA.TTF", "tahomabd.ttf" or "TAHOMABD.TTF" files from my /windows folder so I can change them with my own font files?
any help would be appreciated.
p.s.
I'm NOT using a coocked ROM and I would like to avoid reset to factory settings... as I've been spending the past week to make the device behave just the way I like it...
thanks in advance
Deleting Fonts in WM6/WM6.1
Rename the filename extension ".ttf" (i.e.: "Tahoma.ttf" --> "Tahoma.bak")
Then delete the font file. That's it. No need to reboot.
If you still can't delete it, reboot your device..Then try deleting again.
I've made a cab with the fonts
you can just install it.. and it'll make the arab numbers disappear
btw, the fonts were edited by InfX
EDIT: use Resco Explorer, it will work
I'm stuck with the same problem. I want to replace tahoma.ttf with the Vista version of it. It gives better results with cleartype. It always worked fine until I installed a newer ROM. I don't really understand the solution. Could anybody pleasy make a cab to replace the Tahoma en Courier New fonts with the default ones from Vista? I would be extremely thankful.
just use QuickCAB 1.0 to create a cab with the new fonts.
nir36 said:
just use QuickCAB 1.0 to create a cab with the new fonts.
Click to expand...
Click to collapse
Thanks. Will look into it.
Resco Explorer fixed the problem for me. Total Commander didn't work.
Yeah... total commander.. altho wonderful.. has it's annoyances.
Hi guys, I have this ambition to change the symbols in call history with ones that are colored.
I know that for this some Manila files should be changed, but I don't know where to start the search and what exactly to look for, so any advises would be more than appreciated. thanks
Hi there, files you're looking for are into windows directory, unfortunatly are marked as "read only" and the easiest way to replace them using Resco Explorer. Althought you can find .cab file here here.
Installing this you can keep original files into backup folder end restore when needed.
Bye
The cab is also on XDA forum but it replace the icons on phone menu not in the history...so I assume that the file for history is another one...this file I'm looking for but don't know how to find it...
You have to find and change some graphic file in windows directory. I'm using dutty's R5 so can't help you better.
Those files are located in phcanOverbmp.dll
ArtieQ said:
Those files are located in phcanOverbmp.dll
Click to expand...
Click to collapse
Are you sure ?
muntos said:
Are you sure ?
Click to expand...
Click to collapse
I'm sure, but you need Unsigner.exe and ResHacker to replace/extract those files.
Ok, I found the dll and the resource files inside but I believe that this is for WM phone call history not the Manilla call history right...?
I found the files (Manila files) who is interested in replace them look for :
http://forum.xda-developers.com/showthread.php?p=4774690#post4774690
I'm trying to change the analogue clock on my HD2 but it won't change from the default clock (well sort of i've managed to change it from a square one to a round one), i've followed the instructions on moving the file into the device-windows folder.
but there's a file in there with the same name already and it doesn't replace the original file, if i try to delete the file 20F62884_manila it doesn't give me the option, the delete and rename options are not selectable, they are on the file i've pasted into the windows folder but not the original file, is it protected in any way ?
I'm using the file explorer that came with the Elegancia V8.0 Rom is this ok or do i need to use something else...
Many thanks...
wakers said:
I'm trying to change the analogue clock on my HD2 but it won't change from the default clock (well sort of i've managed to change it from a square one to a round one), i've followed the instructions on moving the file into the device-windows folder.
but there's a file in there with the same name already and it doesn't replace the original file, if i try to delete the file 20F62884_manila it doesn't give me the option, the delete and rename options are not selectable, they are on the file i've pasted into the windows folder but not the original file, is it protected in any way ?
I'm using the file explorer that came with the Elegancia V8.0 Rom is this ok or do i need to use something else...
Many thanks...
Click to expand...
Click to collapse
Many manila fills are protect to overwrite, changing or deleting!
The easiest way is to use a cab file! It will overwrite and it give you the possibility to uninstall so you get back to the original one!
Ore maybe you can simply used a program called CfC GUI!! Perhaps the most simply way if it is fore personal used!
more explication ore where to find it:
http://forum.xda-developers.com/showthread.php?t=470798
The file explorer which is on your device will not overwrite protected files.
But, search for "Total Commander" for Windows Mobile - it´s not the "freshest" software, but free, and it *does* overwrite protected files.
To make it more finger friendly, just change to large icons view!
Or, after all, as the previous poster mentioned, use cab files - those will automatically install and overwrite files.
Cheers for the reply's i've used a cab and yep changed the clock, but most of the clocks i've really liked are not as cab's so will try the total commander now, again thanks for the help, much appreciated...
Buggar even with total commander it says unable to delete file
If you will I make a cab for you! Perhaps the easy's way!!
Forgot i have installed Dinik's Clock for CHT not sure if that effects things...
Thanks for the offer of making a cab file, its the Tag F1 clock i like on this thread, again many thanks...
http://forum.xda-developers.com/showthread.php?t=670875
wakers said:
Forgot i have installed Dinik's Clock for CHT not sure if that effects things...
Thanks for the offer of making a cab file, its the Tag F1 clock i like on this thread, again many thanks...
http://forum.xda-developers.com/showthread.php?t=670875
Click to expand...
Click to collapse
So here you go!
Have fun with it!
Don't forget I'm not the creator of it! I just put it fore you in a cap all credits go to suyama8!
Thanks a lot as said before much appreciated...
wakers said:
Thanks a lot as said before much appreciated...
Click to expand...
Click to collapse
Np mate; We are here to help each other!!!
What is the fastes way to copy files from WINDOWS-folder from my Phone to my laptop?
Cause when I try to open the Windows dir it takes ages to read it out.
Also when I try to copy multiple files I get an Error, but not if I copy one file
The other question is:
In what manilla file are the graphics located for Sense (Cookies Home tab installed)
Is there a list available?
Thanks
Fastest way is for me doing a full Backup with SPB Backup and then read this Backup on PC with the provided SPB Backup Explorer.
Maybe,
crypt0r said:
What is the fastes way to copy files from WINDOWS-folder from my Phone to my laptop?
Cause when I try to open the Windows dir it takes ages to read it out.
Also when I try to copy multiple files I get an Error, but not if I copy one file
The other question is:
In what manilla file are the graphics located for Sense (Cookies Home tab installed)
Is there a list available?
Thanks
Click to expand...
Click to collapse
It depends on what you will sir; if you will changed some graphics (manilla file) you can used cfc_GUI; its a free prog. and its useful and simple.
you can find a way fore download; and how to use by taking a look on a friend's wonderful thread fore that.
"°°how to figure out wich manila file is for what°°"
Using together with M9Editor, helps you a lot more.
But like I mentioned; it depends on what you will do.
crypt0r said:
What is the fastes way to copy files from WINDOWS-folder from my Phone to my laptop?
Cause when I try to open the Windows dir it takes ages to read it out.
Also when I try to copy multiple files I get an Error, but not if I copy one file
The other question is:
In what manilla file are the graphics located for Sense (Cookies Home tab installed)
Is there a list available?
Thanks
Click to expand...
Click to collapse
First copy ure wanted files on your storage card with an file explorer like total commander or resco file explorer, then connected ure hd2 to your notebook, chose Disk Drive and copy it to your harddrive.
to your 2nd question:
extract the manila files of cookies cab : http://msceinf.softonic.de/pocketpc
and then use method of previous post (cfg-gui)
Thank you very much
But I get this Error after importing the manilla files:
It says "Done" in the import list but I can't see any files, just this Error
Hi Guys,
trying to change my start icon used both Restorator 2009 & ResHack and neither of them does the trick for some reason, i have extracted the shellres.192.dll from my HD2 and opened it on both of the those apps and replaced the icons 4609 & 4620 with my own 32 x 32 icon file but all i get after reboot is a blank are where the button should be and the text start and the button is not touchable nothing happens.
Thanks For any help in this weird thing.
If im not mistaken dll files needtobe signed
miller710 said:
If im not mistaken dll files needtobe signed
Click to expand...
Click to collapse
Oh ok, so how do you go about signing them???
121man said:
Oh ok, so how do you go about signing them???
Click to expand...
Click to collapse
good question. I have no idea. lol. sorry.
I don't fully understand taskbar editing. So here is the process i've done on a 6.5.x taskbar.
-Grad the .dll and drag it onto the UnSigner
- create 32x32 png convert to xp colors using icoFX/Axialias Icon Workshop(for converting higher resolutions to .icos e.g the dropdown taskbar in 6.5.x)
-Replace icon using ResHack
-sign it with msigntools
-cab using WinCE or whatever tools are available for download, set the directory to /Windows, install reboot and you have your icons on the taskbar
Just make sure it's the correct version for winMO, i've been using 6.5.5 dll's as a base in all my taskbar works.
Also a simple google search can help you gather up the files.
"How to mod winMO 6.5 taskbar"
Hope this helps
121man said:
Hi Guys,
trying to change my start icon used both Restorator 2009 & ResHack and neither of them does the trick for some reason, i have extracted the shellres.192.dll from my HD2 and opened it on both of the those apps and replaced the icons 4609 & 4620 with my own 32 x 32 icon file but all i get after reboot is a blank are where the button should be and the text start and the button is not touchable nothing happens.
Thanks For any help in this weird thing.
Click to expand...
Click to collapse
you is the official ROM? perhaps because of this
I have so too, was when he set the custom, button Start normally changed
Some help please
Hey, I've tried copying, moving or anything with .dll s in the windows folder and it keeps saying that Rom files cannot be copied. I've tried Total comander, resco explorer and winmo explorer but still can't copy those files.
I'm tired of searching for this answear... and I can find it anywhere... :'(
may someone help me to extract those files from the phone??
Mhz250 said:
Hey, I've tried copying, moving or anything with .dll s in the windows folder and it keeps saying that Rom files cannot be copied. I've tried Total comander, resco explorer and winmo explorer but still can't copy those files.
I'm tired of searching for this answear... and I can find it anywhere... :'(
may someone help me to extract those files from the phone??
Click to expand...
Click to collapse
If you need to place your patched .dll files you need to add them in a cab file first.
Send me your dll files patched by pm i will do a cab tomorrow night after office if you want
I have to first download the file from the phone to edit it... that's what I can't do.
I have the tools, I've already donne something similar. But I can't download the DLL file.
Any ideas please?