Hi guys, I have this ambition to change the symbols in call history with ones that are colored.
I know that for this some Manila files should be changed, but I don't know where to start the search and what exactly to look for, so any advises would be more than appreciated. thanks
Hi there, files you're looking for are into windows directory, unfortunatly are marked as "read only" and the easiest way to replace them using Resco Explorer. Althought you can find .cab file here here.
Installing this you can keep original files into backup folder end restore when needed.
Bye
The cab is also on XDA forum but it replace the icons on phone menu not in the history...so I assume that the file for history is another one...this file I'm looking for but don't know how to find it...
You have to find and change some graphic file in windows directory. I'm using dutty's R5 so can't help you better.
Those files are located in phcanOverbmp.dll
ArtieQ said:
Those files are located in phcanOverbmp.dll
Click to expand...
Click to collapse
Are you sure ?
muntos said:
Are you sure ?
Click to expand...
Click to collapse
I'm sure, but you need Unsigner.exe and ResHacker to replace/extract those files.
Ok, I found the dll and the resource files inside but I believe that this is for WM phone call history not the Manilla call history right...?
I found the files (Manila files) who is interested in replace them look for :
http://forum.xda-developers.com/showthread.php?p=4774690#post4774690
Related
Hey there ppl, im stil quite new here, I started today expirementing on the cooking, and got addicted, but im struggling to make the ROM automaticaly install on the first boot.. I can't even seem to get a new theme in, except for the HTC and Windows Mobile 6.1 Theme..
Any help will be greatly appreciated, I have searched a thousand times and only came on a thread thats been dead from 2005..
Regards
Hi,
Search your kitchen for files called config*.txt in the OEM folder. There might be more than 1.
In one of those you will see it setting a tsk file as the theme (hopefully).
If not then add a line such as
Code:
TSK: \WINDOWS\Htc.tsk
To one of the files.
If there is a line saying CFG: Config.txt then add the TSK command to the config.txt file.
Ta
Dave
DaveShaw said:
Hi,
Search your kitchen for files called config*.txt in the OEM folder. There might be more than 1.
In one of those you will see it setting a tsk file as the theme (hopefully).
If not then add a line such as
Code:
TSK: \WINDOWS\Htc.tsk
To one of the files.
If there is a line saying CFG: Config.txt then add the TSK command to the config.txt file.
Ta
Dave
Click to expand...
Click to collapse
Okay i see, but doesn't really help me, because I want my own theme to be configured, not the basic HTC one, and if you meant that I should replace the name, where do I throw the .tsk file in? in wich folder? Thanks
Pho3niX90 said:
Okay i see, but doesn't really help me, because I want my own theme to be configured, not the basic HTC one, and if you meant that I should replace the name, where do I throw the .tsk file in? in wich folder? Thanks
Click to expand...
Click to collapse
Just create a package to place your own tsk file into \Windows and replace the line in the config file.
Thanks
Dave
Thanks for the help, did like you told me and eventually got it just right
I made a little Tutorial how you can figure out wich manila file is for what.
Only you need is cfc_GUI you can download from here:
http://forum.xda-developers.com/showthread.php?t=470798 <----Thanks Chainfire for that!
At the first you had to Cerate a FOLDER on your DESKTOP called manila files or something you want!
At the first start from cfc_GUI it will ask for a folder and than you choose the created Folder!!
All other things are in the Pictures!!!!
Step1:
:
Step2:
Step3:
Step4:
Step5:
Hope that helps a little bit?
Dic3ptor said:
I made a little Tutorial how you can figure out wich manila file is for what.
Only you need is cfc_GUI you can download from here:
http://forum.xda-developers.com/showthread.php?t=470798 <----Thanks Chainfire for that!
At the first you had to Cerate a FOLDER on your DESKTOP called manila files or something you want!
At the first start from cfc_GUI it will ask for a folder and than you choose the created Folder!!
All other things are in the Pictures!!!!
Hope that helps a little bit?
Click to expand...
Click to collapse
it helps loads for idiots like me, thanks loads for your time and patience
Thank you! Dankeschön!
Your Welcome! Hab ich gern gemacht!
Does anyone know the file name for the softkey bar?
The softkey is onlay a .png picture so far i no with a name. Its in the Windows folder on the device.
Softkeybar: HTCblack_softkeybar.png
Taskbar:HTCblack_taskbar.png
But later at the day i will have a look!
Hello,
is this only to copy the manila files or copy this software the shellres.dll etc. too???
Cause i cant copy the shellres.dll from my device to my pc "cant copy....." i tryed this with totalcommander :-(
Hey mate
good job Thank you
Very Basic Question
Up to now I have only "consumed" as a user, but I start to dig deeper...
Basic Question: The manila files contain only pictures (skins, buttons etc.)? There is no code in?
So if I modify one of the manilas, I just change the appearance of that specific part of the screen?
If anyone could confirm or explain the function of the manila files, would be great.
Hugo the JungleDyret
hugojungle said:
Up to now I have only "consumed" as a user, but I start to dig deeper...
Basic Question: The manila files contain only pictures (skins, buttons etc.)? There is no code in?
So if I modify one of the manilas, I just change the appearance of that specific part of the screen?
If anyone could confirm or explain the function of the manila files, would be great.
Hugo the JungleDyret
Click to expand...
Click to collapse
Some Manila files are only graphics (called QTC) others are Luascripts and Mode9 (what you call code).
The tool described above will help you for the graphics
oh wow loads better than manila editor thanks man
Your welcome!
Which manila file is responsilbe for the day format in the weather tab?
copy your manila files in a folder on your pc and scan the folder with this
http ://forum.xda-developers.com/showthread.php?t=464984 (remove the space before the : to get the link to work) and it'll give you the name of the files and therefore their functionality
I figured out that it is 308671e5_manila.
I edited the file to the desired format but it doesn't change in the weather tab.
Any idea?
Etihad said:
I figured out that it is 308671e5_manila.
I edited the file to the desired format but it doesn't change in the weather tab.
Any idea?
Click to expand...
Click to collapse
Can you post the manila file here? Because i cant find it on my device.
Sure. There you go.
Woow, thank you very much for these. Now i can begin to create my first Manilas.
Because before you post this, i don't know how i can became the Manilas on my PC and in cfc gui. God bless you. Bonito77.
my keeps sayin export change i crnt do anything, alos which is the manila for the background for like everything? the black one with like white light in the middle? how do i change that?
dy_domyoung said:
my keeps sayin export change i crnt do anything, alos which is the manila for the background for like everything? the black one with like white light in the middle? how do i change that?
Click to expand...
Click to collapse
The best is to post a screenshot! Because i dont know what you mean!
I'm trying to change the analogue clock on my HD2 but it won't change from the default clock (well sort of i've managed to change it from a square one to a round one), i've followed the instructions on moving the file into the device-windows folder.
but there's a file in there with the same name already and it doesn't replace the original file, if i try to delete the file 20F62884_manila it doesn't give me the option, the delete and rename options are not selectable, they are on the file i've pasted into the windows folder but not the original file, is it protected in any way ?
I'm using the file explorer that came with the Elegancia V8.0 Rom is this ok or do i need to use something else...
Many thanks...
wakers said:
I'm trying to change the analogue clock on my HD2 but it won't change from the default clock (well sort of i've managed to change it from a square one to a round one), i've followed the instructions on moving the file into the device-windows folder.
but there's a file in there with the same name already and it doesn't replace the original file, if i try to delete the file 20F62884_manila it doesn't give me the option, the delete and rename options are not selectable, they are on the file i've pasted into the windows folder but not the original file, is it protected in any way ?
I'm using the file explorer that came with the Elegancia V8.0 Rom is this ok or do i need to use something else...
Many thanks...
Click to expand...
Click to collapse
Many manila fills are protect to overwrite, changing or deleting!
The easiest way is to use a cab file! It will overwrite and it give you the possibility to uninstall so you get back to the original one!
Ore maybe you can simply used a program called CfC GUI!! Perhaps the most simply way if it is fore personal used!
more explication ore where to find it:
http://forum.xda-developers.com/showthread.php?t=470798
The file explorer which is on your device will not overwrite protected files.
But, search for "Total Commander" for Windows Mobile - it´s not the "freshest" software, but free, and it *does* overwrite protected files.
To make it more finger friendly, just change to large icons view!
Or, after all, as the previous poster mentioned, use cab files - those will automatically install and overwrite files.
Cheers for the reply's i've used a cab and yep changed the clock, but most of the clocks i've really liked are not as cab's so will try the total commander now, again thanks for the help, much appreciated...
Buggar even with total commander it says unable to delete file
If you will I make a cab for you! Perhaps the easy's way!!
Forgot i have installed Dinik's Clock for CHT not sure if that effects things...
Thanks for the offer of making a cab file, its the Tag F1 clock i like on this thread, again many thanks...
http://forum.xda-developers.com/showthread.php?t=670875
wakers said:
Forgot i have installed Dinik's Clock for CHT not sure if that effects things...
Thanks for the offer of making a cab file, its the Tag F1 clock i like on this thread, again many thanks...
http://forum.xda-developers.com/showthread.php?t=670875
Click to expand...
Click to collapse
So here you go!
Have fun with it!
Don't forget I'm not the creator of it! I just put it fore you in a cap all credits go to suyama8!
Thanks a lot as said before much appreciated...
wakers said:
Thanks a lot as said before much appreciated...
Click to expand...
Click to collapse
Np mate; We are here to help each other!!!
New Opera version: download
You know the drill... unpack and copy opera9.exe over the opera9.exe in the \windows folder (preferably using Resco File Explorer)
Changelog: don't know
Is it better than other versions: find out yourself
thank you
Thanks very much
Thanks dude.
Hi, what about the people who do not know the drill? where do i copy the file? and then what do i do? do i have to use resco explorer, i want to use the normal file explorer. i have a T-MO HD2
Kazz88 said:
Hi, what about the people who do not know the drill? where do i copy the file? and then what do i do? do i have to use resco explorer, i want to use the normal file explorer. i have a T-MO HD2
Click to expand...
Click to collapse
You have to extract the Opera9 file and copy directly to Windows.
It is all.
Best Regards,
Hi, what you have said is a bit vague. the extrated file from the download is an exe file so dnt i need to run it once i copy it over? and what windows directory? do you mean the windows folder on the device memory? not the opera9 folder in the windows directory?
so your asking i copy the exe file into the windows folder on the device memory and just run the exe? is that what i do?
please explain properly (full file path and instructions)
Thank you very much
Kazz88 said:
Hi, what you have said is a bit vague. the extrated file from the download is an exe file so dnt i need to run it once i copy it over? and what windows directory? do you mean the windows folder on the device memory? not the opera9 folder in the windows directory?
so your asking i copy the exe file into the windows folder on the device memory and just run the exe? is that what i do?
please explain properly (full file path and instructions)
Thank you very much
Click to expand...
Click to collapse
Yes you have to copy Opera9 file to the Windows device memory, then you will be asked to overwrite, so you should tam yes.
Afterthat you can normally run Opera web browser but in new version.
just in my head?
is it just in my head or is this much faster!?!
ty gonna try it out
tobiascrystal said:
is it just in my head or is this much faster!?!
Click to expand...
Click to collapse
Much faster doing what? Page loading times are about your internet connection are they not?
Faster optimization, screen rotation? Pleaze post !
I copied the file overiding the original and when I try to start opera, it says "Opera Loader" with a red cross which when pressed it exits...
Any thoughts?
appelflap said:
New Opera version: download
You know the drill... unpack and copy opera9.exe over the opera9.exe in the \windows folder (preferably using Resco File Explorer)
Changelog: don't know
Is it better than other versions: find out yourself
Click to expand...
Click to collapse
I deleted the existing Opera.exe file from the Windows folder and copied this one, but the app won't start. I think it has something to do with the attributes of the new exe file. The ROM attribute is ghosted. Any ideas?
Thanks
Procedure is clear to me. Just overwrite .exe file with new .exe file
But to spare me hazzle and spending one day to revert: does this change my opera-settings which I tweaked in operaconfig or goof them by incompatibility ?
Does this new build support flash better than the old one ?
What EXACTLY can the new build better than the old one ?
troed said:
Procedure is clear to me. Just overwrite .exe file with new .exe file
But to spare me hazzle and spending one day to revert: does this change my opera-settings which I tweaked in operaconfig or goof them by incompatibility ?
Does this new build support flash better than the old one ?
What EXACTLY can the new build better than the old one ?
Click to expand...
Click to collapse
I have similar questions,my opera is skinned and as troed mentioned
several operaconfig tweaks including having moved the Cache.
Anyone know whether these will all need re-doing if we upgrade
to newer version ?
In short is it worth the effort just to have a different version number ?
Anybody notice that with this version Manila internet ta bookmark thumbnail don't work with manila 2016?
I and others using the whole package. I have not tried only the .exe
bobsbbq said:
Anybody notice that with this version Manila internet ta bookmark thumbnail don't work with manila 2016?
I and others using the whole package. I have not tried only the .exe
Click to expand...
Click to collapse
Hey Bobsbbq, do you mean the thumbnail not populating a page image? If so, yes I have. The only way I've found to get the image to show up is to open each favorite site in IE.
Hi Guys,
trying to change my start icon used both Restorator 2009 & ResHack and neither of them does the trick for some reason, i have extracted the shellres.192.dll from my HD2 and opened it on both of the those apps and replaced the icons 4609 & 4620 with my own 32 x 32 icon file but all i get after reboot is a blank are where the button should be and the text start and the button is not touchable nothing happens.
Thanks For any help in this weird thing.
If im not mistaken dll files needtobe signed
miller710 said:
If im not mistaken dll files needtobe signed
Click to expand...
Click to collapse
Oh ok, so how do you go about signing them???
121man said:
Oh ok, so how do you go about signing them???
Click to expand...
Click to collapse
good question. I have no idea. lol. sorry.
I don't fully understand taskbar editing. So here is the process i've done on a 6.5.x taskbar.
-Grad the .dll and drag it onto the UnSigner
- create 32x32 png convert to xp colors using icoFX/Axialias Icon Workshop(for converting higher resolutions to .icos e.g the dropdown taskbar in 6.5.x)
-Replace icon using ResHack
-sign it with msigntools
-cab using WinCE or whatever tools are available for download, set the directory to /Windows, install reboot and you have your icons on the taskbar
Just make sure it's the correct version for winMO, i've been using 6.5.5 dll's as a base in all my taskbar works.
Also a simple google search can help you gather up the files.
"How to mod winMO 6.5 taskbar"
Hope this helps
121man said:
Hi Guys,
trying to change my start icon used both Restorator 2009 & ResHack and neither of them does the trick for some reason, i have extracted the shellres.192.dll from my HD2 and opened it on both of the those apps and replaced the icons 4609 & 4620 with my own 32 x 32 icon file but all i get after reboot is a blank are where the button should be and the text start and the button is not touchable nothing happens.
Thanks For any help in this weird thing.
Click to expand...
Click to collapse
you is the official ROM? perhaps because of this
I have so too, was when he set the custom, button Start normally changed
Some help please
Hey, I've tried copying, moving or anything with .dll s in the windows folder and it keeps saying that Rom files cannot be copied. I've tried Total comander, resco explorer and winmo explorer but still can't copy those files.
I'm tired of searching for this answear... and I can find it anywhere... :'(
may someone help me to extract those files from the phone??
Mhz250 said:
Hey, I've tried copying, moving or anything with .dll s in the windows folder and it keeps saying that Rom files cannot be copied. I've tried Total comander, resco explorer and winmo explorer but still can't copy those files.
I'm tired of searching for this answear... and I can find it anywhere... :'(
may someone help me to extract those files from the phone??
Click to expand...
Click to collapse
If you need to place your patched .dll files you need to add them in a cab file first.
Send me your dll files patched by pm i will do a cab tomorrow night after office if you want
I have to first download the file from the phone to edit it... that's what I can't do.
I have the tools, I've already donne something similar. But I can't download the DLL file.
Any ideas please?