Database Info

Cab-file creation question.

Hi,
I have a question. I have for example SPB Mobiele Shell. We all now this has to be installed via a PC and i needs a serial to install. I have the program and the serial and i would like to make a cab-file of this 2. I have a program to make cab-files, WinCE CAB Manager. Can anyone explain to me how i can do this? I like to have this on my SD-card and like to install it from there in case of emergency's. I hope someone can help me with this.
Thx

many activesync install exe's
can be renamed to zip and one can out the cab files
give it a try

Rudegar said:
many activesync install exe's
can be renamed to zip and one can out the cab files
give it a try
Click to expand...
Click to collapse
Tried that but no luck. I think this is not what i mean. I would like to turn this exe into a CAB and the key included. So when i install the Cab i don't have to register.

one would think the program maker took precautions to make that impossible otherwise your cab could be distributed as a pretty easy free version
you can try to single out what files it depend
on and make a cab file from cratchs
and if the exe or dll files got alter when the serial was given
that cab would be reg'd
otherwise you would have to find out what registries was altered in the
serial process and make a reg which which did those alterations
and get the cab file to run it

Most installations that require you to install through activesync end up leaving a cab file behind. Check Program Files\Activesync\SPB... for the cab file. If it is not there restart the installation but after you have executed the setup file leave it alone and search for the cab file again. I hope this is what you were looking for

ALL exe that install via activesync have a cab, some are hidden in the profiles temporary files, some auto-delete once installed, so leave the application hanging in the install and do a search for recent files and sort by date/time (remember to allow it to scan hidden and system folders). a lot go into the activesync directory, some go into program files, i have even found some that go into the internet explorer temp files, install, and then delete themselves. The most common hiding place is your computers profile temp folder --- typically found under
C:\Documents and Settings\PROFILE\Local Settings\Temp
just dig around, its not to difficult once you find the 3 most basic hiding places.
good luck.

Sponzert said:
Hi,
I have a question. I have for example SPB Mobiele Shell. We all now this has to be installed via a PC and i needs a serial to install. I have the program and the serial and i would like to make a cab-file of this 2. I have a program to make cab-files, WinCE CAB Manager. Can anyone explain to me how i can do this? I like to have this on my SD-card and like to install it from there in case of emergency's. I hope someone can help me with this.
Thx
Click to expand...
Click to collapse
You can simply download the CAB files from SPB site directly.

Sponzert said:
Hi,
I have a question. I have for example SPB Mobiele Shell. We all now this has to be installed via a PC and i needs a serial to install. I have the program and the serial and i would like to make a cab-file of this 2. I have a program to make cab-files, WinCE CAB Manager. Can anyone explain to me how i can do this? I like to have this on my SD-card and like to install it from there in case of emergency's. I hope someone can help me with this.
Thx
Click to expand...
Click to collapse
I have run into a similar situation where my installation was failing due to the huge size of a CAB file.
In my case, the size of the CAB was nearly 23mb and the free storage left was around 26mb. This made the installer fail as it ran out of space midway during the install.
I know one thing for sure was that the PC installers (Exes that would run on the PC that would extract the CAB on the device) would extract the CABs and put them in \windows\appmgr\install folder and would trigger the installer on the device.
So during my second attempt, when the device prompted for installation location "device or storage card", I opened up the explorer on the device (guess you can do the same thing with Windows Explorer since your would stay connected over USB using Activesync) and went into \windows\appmgr\install folder and made a copy of the cab to the storage card (you can copy to your PC as well).
Exited the installer and then installed the cab from the storage card and the installation went fine.
Not sure about how the SPB apps work since there are two options during the PC install. Trail or Registered version. Based on the option chosen, it would either extract the necessary CAB (either trial or registered). I hope it creates a "Registered" version of the app in the CAB after you follow the above steps.
Hope this helps.
PS: I wish that the standard install location on the device "\windows\appmgr\install" be changed to the storage card by some tweaks. So far not successful in finding/getting one.

vprabu said:
I have run into a similar situation where my installation was failing due to the huge size of a CAB file.
In my case, the size of the CAB was nearly 23mb and the free storage left was around 26mb. This made the installer fail as it ran out of space midway during the install.
I know one thing for sure was that the PC installers (Exes that would run on the PC that would extract the CAB on the device) would extract the CABs and put them in \windows\appmgr\install folder and would trigger the installer on the device.
So during my second attempt, when the device prompted for installation location "device or storage card", I opened up the explorer on the device (guess you can do the same thing with Windows Explorer since your would stay connected over USB using Activesync) and went into \windows\appmgr\install folder and made a copy of the cab to the storage card (you can copy to your PC as well).
Exited the installer and then installed the cab from the storage card and the installation went fine.
Not sure about how the SPB apps work since there are two options during the PC install. Trail or Registered version. Based on the option chosen, it would either extract the necessary CAB (either trial or registered). I hope it creates a "Registered" version of the app in the CAB after you follow the above steps.
Hope this helps.
PS: I wish that the standard install location on the device "\windows\appmgr\install" be changed to the storage card by some tweaks. So far not successful in finding/getting one.
Click to expand...
Click to collapse
Thank you, this did the trick for me. Installed en included the registration.

Welcome. I am happy that I could be of some help

vprabu said:
Welcome. I am happy that I could be of some help
Click to expand...
Click to collapse
Now i have everything in registered Cab-files on my SD-card. Now i can make the switch to WM6. I'm dutch and have a P3300 and i guess it will take some time before HTC wil come with a dutch WM6 upgrade, so maybe not the place to ask but do you now where i can find a original English WM6 for the P3300?

How to kill WM6 system programs

For personal reasons, I want to kill solitaire in my WM6 phone. Not just the shortcut, I want it removed from the Windows directory! Not to save money but to keep me from playing it !
It is a protected system file on board the phone - how do I permantly kill it?
I will just play one game of solitaire, then check if there is an answer - doh!!!

make a rom from scratch which dont include the exe files

I want to avoid making a ROM like that, but I guess that is the only way? I did not know this file was part of the ROM - Read Only Memory - so I have to live with it then ... any other way to kill it without damaging the unit?

try this.
install resco explorer.
look in the /windows folder and find out the name of the solitare executable. (most likely solitare.exe)
make a empty text file on your comp. , rename it to the the file you want to del. (from newfile.txt to solitare.exe---->the icon should change to that of an executable file)
copy this file onto your sd card and with resco explorer copy this file into the windows directory...it should ask you permission to overwrite.
reboot

Using Total Commander, go to folder \windows\start menu\programs\games\ and remove (delete) the lnk file related to Solitaire. It will not delete the executable but will make it invisible. Out of sight is out of mind!

The real answer
You need to get hold of self_control_v1.exe but I can't remember where I got it from. It's the same program that stops me eating too much.
LOL

fallenczar said:
try this.
install resco explorer.
look in the /windows folder and find out the name of the solitare executable. (most likely solitare.exe)
make a empty text file on your comp. , rename it to the the file you want to del. (from newfile.txt to solitare.exe---->the icon should change to that of an executable file)
copy this file onto your sd card and with resco explorer copy this file into the windows directory...it should ask you permission to overwrite.
reboot
Click to expand...
Click to collapse
Great minds think alike.
This won't delete the file, but it will mask it with another file. (The file is still in the ROM.)

ivanmmj said:
Great minds think alike.
This won't delete the file, but it will mask it with another file. (The file is still in the ROM.)
Click to expand...
Click to collapse
it should actually delete the file (you are over writing it with another file of the same name)

Cool, it worked!
Or, at least I am not smart enough to find and run Solitare.exe any more ...
Mission complete!
Trial version of Resco did it, but it will run out in 7 days. Wonder if it is worth to keep it, now that I HAVE killed Solitare.exe?

How to clean up my windows folder

How to clean up my windows folder
- Remove touchflo 2d
- remove Htc Home plugin
my folder size more than 136 mb :S make my deivce so heavy :S

Dr.Mazika said:
How to clean up my windows folder
- Remove touchflo 2d
- remove Htc Home plugin
my folder size more than 136 mb :S make my deivce so heavy :S
Click to expand...
Click to collapse
install a clean rom, or customize your own. the windows directory is going to be a little large regardless, the operating system is there..

what is the normal size of windows folder

any how can i customize my room to remove and add new applications

That's basically what got this community started... just about everyone here can testify to having looked into ROM Cooking... please research before asking how to do it, because I PROMISE there's a thread or two out there about it

Clean windows folder possible ?
I'm trying to cook my own rom but when I add an EXT module, all files are in Windows directory and the app.dat file only copy them in the app directory.
So is it realy possible to have a clean windows directory, how to put files directly in app folder? must I use an OEM module with initflashfile or ???
thanks all

superraoul said:
I'm trying to cook my own rom but when I add an EXT module, all files are in Windows directory and the app.dat file only copy them in the app directory.
So is it realy possible to have a clean windows directory, how to put files directly in app folder? must I use an OEM module with initflashfile or ???
thanks all
Click to expand...
Click to collapse
All files go into \windows. The first thing you need to ask is this: do I need to copy the file into another directory, like \program files? A lot of apps work just fine if you leave all of the files in \windows. The files are going to be in \windows in one form or another, so you save space by just running the app out of \windows. You need to change shortcut paths and sometimes registry key paths to get this to work, but in my experience, it works about 95% of the time. Usually, if you've got a multi-component application (several files besides just the .exe), the .exe will search for other files it needs to run in the same directory that the .exe is located in, so you're good to go if everything is in \windows. Some apps have sub-folders, so you'll have to get that folder and its contents into \windows. The best way to do this is with a .cab file or a zip file during customization (using a mortscript for the latter). Zip files are nice, because they install really quickly and are easy to make and edit.
Anyway, if you need to get files into another directory for whatever reason, I'd say that the app.dat method is probably the worst, because if you have multiple files, then you increase the file count in \windows by that amount. Put them in a zip file or a cab file, and then you'll reduce the file count to 1 for the particular package. You will also compress the files, and save some rom storage space.
You can also look into \extendir for another method to clean up the \windows directory.
You do need to be careful with some apps if they have an .ini file or an .xml file or something similar that is basically a settings file. It's usually better if these files aren't read only, so you may need to figure a way to copy the file into the \windows directory.

Add file to WM programs list

I have a exe file on my Touch HD which is an application. It wasn't installed on my device, it was simply copied from my computer. To access the application, I currently have to go into file explorer and select the exe file.
I would like to be able to access the application from Start/Programs. Is there any way that I can make a link to my file appear in the programs list? Perhaps a new registry entry??
Thanks

dgspitfire123 said:
I have a exe file on my Touch HD which is an application. It wasn't installed on my device, it was simply copied from my computer. To access the application, I currently have to go into file explorer and select the exe file.
I would like to be able to access the application from Start/Programs. Is there any way that I can make a link to my file appear in the programs list? Perhaps a new registry entry??
Thanks
Click to expand...
Click to collapse
Move the exe file to your programs folder manually
Edit: Sorry I just thought actually that I don't know if this will work for your device (Touch HD with WM 6.1) but it works for me with my device and my ROM.

on my Nike with 6.0 i do it by copying the exe file and paste shortcut to Start Menu/Programs

ingerasu said:
on my Nike with 6.0 i do it by copying the exe file and paste shortcut to Start Menu/Programs
Click to expand...
Click to collapse
Actually you are not making a shortcut, you are copying the whole exe to the programs folder. You should actually cut and paste that way you are not having the program exe twice on your device - Save space on your internal memory.

it's .lnk file and has less than 1 KB. But thanks in advice

Opera 9.7.36000

New Opera version: download
You know the drill... unpack and copy opera9.exe over the opera9.exe in the \windows folder (preferably using Resco File Explorer)
Changelog: don't know
Is it better than other versions: find out yourself

thank you

Thanks very much

Thanks dude.

Hi, what about the people who do not know the drill? where do i copy the file? and then what do i do? do i have to use resco explorer, i want to use the normal file explorer. i have a T-MO HD2

Kazz88 said:
Hi, what about the people who do not know the drill? where do i copy the file? and then what do i do? do i have to use resco explorer, i want to use the normal file explorer. i have a T-MO HD2
Click to expand...
Click to collapse
You have to extract the Opera9 file and copy directly to Windows.
It is all.
Best Regards,

Hi, what you have said is a bit vague. the extrated file from the download is an exe file so dnt i need to run it once i copy it over? and what windows directory? do you mean the windows folder on the device memory? not the opera9 folder in the windows directory?
so your asking i copy the exe file into the windows folder on the device memory and just run the exe? is that what i do?
please explain properly (full file path and instructions)
Thank you very much

Kazz88 said:
Hi, what you have said is a bit vague. the extrated file from the download is an exe file so dnt i need to run it once i copy it over? and what windows directory? do you mean the windows folder on the device memory? not the opera9 folder in the windows directory?
so your asking i copy the exe file into the windows folder on the device memory and just run the exe? is that what i do?
please explain properly (full file path and instructions)
Thank you very much
Click to expand...
Click to collapse
Yes you have to copy Opera9 file to the Windows device memory, then you will be asked to overwrite, so you should tam yes.
Afterthat you can normally run Opera web browser but in new version.

just in my head?
is it just in my head or is this much faster!?!

ty gonna try it out

tobiascrystal said:
is it just in my head or is this much faster!?!
Click to expand...
Click to collapse
Much faster doing what? Page loading times are about your internet connection are they not?
Faster optimization, screen rotation? Pleaze post !

I copied the file overiding the original and when I try to start opera, it says "Opera Loader" with a red cross which when pressed it exits...
Any thoughts?

appelflap said:
New Opera version: download
You know the drill... unpack and copy opera9.exe over the opera9.exe in the \windows folder (preferably using Resco File Explorer)
Changelog: don't know
Is it better than other versions: find out yourself
Click to expand...
Click to collapse
I deleted the existing Opera.exe file from the Windows folder and copied this one, but the app won't start. I think it has something to do with the attributes of the new exe file. The ROM attribute is ghosted. Any ideas?
Thanks

Procedure is clear to me. Just overwrite .exe file with new .exe file
But to spare me hazzle and spending one day to revert: does this change my opera-settings which I tweaked in operaconfig or goof them by incompatibility ?
Does this new build support flash better than the old one ?
What EXACTLY can the new build better than the old one ?

troed said:
Procedure is clear to me. Just overwrite .exe file with new .exe file
But to spare me hazzle and spending one day to revert: does this change my opera-settings which I tweaked in operaconfig or goof them by incompatibility ?
Does this new build support flash better than the old one ?
What EXACTLY can the new build better than the old one ?
Click to expand...
Click to collapse
I have similar questions,my opera is skinned and as troed mentioned
several operaconfig tweaks including having moved the Cache.
Anyone know whether these will all need re-doing if we upgrade
to newer version ?
In short is it worth the effort just to have a different version number ?

Anybody notice that with this version Manila internet ta bookmark thumbnail don't work with manila 2016?
I and others using the whole package. I have not tried only the .exe

bobsbbq said:
Anybody notice that with this version Manila internet ta bookmark thumbnail don't work with manila 2016?
I and others using the whole package. I have not tried only the .exe
Click to expand...
Click to collapse
Hey Bobsbbq, do you mean the thumbnail not populating a page image? If so, yes I have. The only way I've found to get the image to show up is to open each favorite site in IE.