First let me tell you where i am at. I was running Farias WM6 Real Thing Rom, but there were a few bugs and a lot of junk programs i didn't want.
so i used the Faria ROMkitchen to flash my rom, which went fine, the phone flashed and everything was ok in use, however i left DRM selected which i dont want by mistake. and upon further examination the MS office icons are not in the programs menu, but the pword and pexcel files are in the windows directory and do load fine when executed. but i dont know why this was the case when i did have office selected.
and the major problem is when i connect via usb, activesync recognises the connection. but doesn't ask to create a partnership, but goes directly to guest profile. (I am using Activesync 4.5) and when i try to connect to my vista machine with Mobile Device Center i just recieve an error when the connection is active. I cannot even use the phone for push email with my exchange as i am unable to install my self signed certificate as it states it is unsuccessful when i attempt to install and gives me the classic microsoft helpdesk advice asking me to reboot .
so i tried to run through the kitchen again de-selecting DRM and reflashing, but when it tries the flash i recieve error ERROR [212]: FILE CREATE The update utility can not create the requested file. Please check your update utility. so i reset to the bootloader and tried the flash again and recieved error 300 saying i needed an updated Rom Upgrade Utility.
I then tried to install the Tmobile Ship Rom but this would not work as the upgrade utility reports that it cannot connect to the phone with various connection codes even in the bootloader.
My Wizard is a G3 device and has been CID unlocked and i have installed many a rom on this phone.
please help as i am on a malfunctioning WM6 rom that i cannot connect to via activesync and can only use for making calls only.
any help much appreciated, i have had occasional problems flashing in the past but i could resolve these easilly but this is leaving me stumped, it seems like the sync portion of the phone is not working correctly so i cannot downgrade to my original tmobile uk rom.
help help help
fuzzysb
u try flashing on a different OS?
Update after much screwing around, i did try flashing on XP and also Vista but no go. interestingly i have finally managed to push through the oriiginal update from tmob but it was achieved by uninstalling and re-installing activesync a few times and booting into the bootloader its now upto 80% and running. another observation that is wierd, the WM6 rom that was installed was missing cpanel icons like power and backlight. i will upgrade using the kitchen one last time and see if it goes ok this time.
Can someone direct me to a walkthrough for a hard-reset on an xda mini s?
I have searched and searched these threads-alas! but i do recall that i can perform a hard reset to reload the o/s restart in basic mode and delete the unwanted software (which files it would be i dont know)
Also I've been following the guides given on this site to unlock cid (succsessful) and flash the rom on the pda, but cant get Vista to run the flash rom update utilities software to flash the rom to downgrade. It keeps closing it down. I've spent hours attemping this but have had to concede that Vista isnt wanting to play! yes i have installed active sync and the rom update version for Vista. Does the cab file that has to be installed on the pda have to be re-installed every time the thing is rebooted by the software? After dozens of goes i still have spl's of 2.1. (I only aim to flash the rom with the T-Mobile 2.6 version of WM5 to get a stable device at the moment)
Without wanting to spend valuable hours of my life persuing this i might just try it on a friends xp desktop Pc and see if i can get success.
guys, I need some help here...
Just lately I started to learn about cooking ROM. Cause I have only WM6.1 Kitchen, I tried to cook WM6.1 for my iPAQ rw6828.
I've finished my first ROM for my rw6828, flashed it, but some problems appears.
1. I have no certificate installed on my device. Tried to install third party certificate, but a message box shows "The certificate was not successfully added. Please restart your device and try again." I've restarted it, but it still shows the same. Could someone tell what is wrong whit my ROM?
2. I can't change my theme at all. I think it has something to do with my certificate problem, but still I don't have the answer...
Please help...
I have the HTC HD2 recently released by t-mobile (3/24/10). Everytime I download and try to install a cabinet (.cab) file, I am greeted by the screen that reads (Installation Unsuccessful) Any suggestions for getting this to work? I have tried downloading from different sources.
sounds like ur installing apps that wasnt made for winmo 6.5
try installing BsB onto the device and turning on the unsigned apps button... hope it works Good Luck...
also a lil heads up, when askin a question alway let people know what ur doing what u hav and what u need, Device ?
Rom ?
app trying to use ?
and a bref descript of the problem
Thanks for the all the advice. I'll take that into consideration.
CABS meant for this device
I'm having the same issue. I flashed the ROM to the new T-MO version and worked great. Installed some CABS that I had installed before and suddenly I get this error on any CAB I try to install. Regardless if it is VIA Windows Marketplace, copied to the device by usb, sent over by WMDC, or downloaded directly on the device and saved. No prompt where to install, just pops up with installation failed. And some of these CABS I know for a fact work. It's got to be some kind of security issue I would think, but I'm not getting any prompt or warning.
I've scoured the web the last week and lots of people with this issue, but no solutions.
Suggestions?
HTC HD2 Installation of update
I am guessing you are speaking of the latest rom update put out by TMobile?
If so, go to TMobile here ----> http://support.t-mobile.com/doc/tm54430.xml?
and then follow the instructions as given. I had a problem with my H2 then did this update and all is well.
Good Luck!
Certificates?
That's what I already did! And it was working fine, I was installing CABs, etc. Now nothing will install. I know that I can always do a hard reset, but something caused this problem and I can't keep hard resetting forever. I'm not a newbie here to flashing roms of working with windows mobile either. I did notice today though that under security/certificates there are no certificates now. There were lots of them installed from the factory with the original rom, but none now. I don't know if the rom flash wiped them and didn't reinstall, or something else did. It worked so I never checked after flashing. I suppose I could find someone else with a HD2 and have them send me copies of all there certs.
I'm having the same issue with any cabs im trying to install. Any solutions?
cappyfusa said:
I'm having the same issue with any cabs im trying to install. Any solutions?
Click to expand...
Click to collapse
can you give specific .cabs - links - that aren't working for you?
Installation unseccussful problem with no fix?
I'm having the same issues as the ppl above. Was installing cabs no problem, then suddenly I cannot install anything.
Is there a fix or has this topic been left behind.
Any help??
US T-Mobile HD2 installation problem
Gosh, i never thought a lot of people would be having installation problems on their T-mobile HD2 like me.
I have the same unit, just had it last June 2010.
And i just couldn't get to install any third party application on it!
but im able to install apps if and only if i downloaded it on Windows Market place using my phone. Any other method aside from the the Windows Market Place in my phone wouldn't do. Like if i downloaded an application, any application, in my pc and transferring it to my phone through Microsoft's active sync or disc drive transfer and when i try installing it, it just wouldn't install?
i couldn't even install .Net Framework 3.5 on it to hoping to be able to use CHT or any other interesting apps requiring the framework. i got the .Net Framework Downloaded it frm here forum.xda-developers.com/showthread.php?t=625483 and also here forum.xda-developers.com/showthread.php?t=591784
i also couldn't even get to install recommended drivers like Chainfire's HD2/Leo 3D Driver Patch. As you can see, i really couldnt install any requirement apps to get the good progs and stuffs =/ and i've downloaded a lot of apps already hoping to see them running on my hd2, but only to be turned down for they couldn't seem to get installed =/
my unit is HTC HD2 from US, originally a T-mobile and has these specifications:
OS version: 5.2.21892 (21892.5.0.89)
Manila version: 2.5.20121412.2
ROM version: 2.13.531.1 (90963) WWE
ROM date: 04/28/10
Radio version: 2.10.50.26
Protocol version: 15.39.50.07U
this is a Leo having a flash size of 1024
i sincerely hope you'd help me diagnose the problems properly =/ Thank you sooo much for the help then masters.
and oh one more thing, having said my phone's specifications, is it ok to try flashing it using this thread and a few ROMS on it? i've been reading carefully these thereads
forum.xda-developers.com/showthread.php?t=591784
forum.xda-developers.com/showthread.php?t=625483
forum.xda-developers.com/showthread.php?t=611433
However, my only problem is, i really couldnt get to install the necessary apps like the .net framework and stuff =/
doggiedaddy1 said:
That's what I already did! And it was working fine, I was installing CABs, etc. Now nothing will install. I know that I can always do a hard reset, but something caused this problem and I can't keep hard resetting forever. I'm not a newbie here to flashing roms of working with windows mobile either. I did notice today though that under security/certificates there are no certificates now. There were lots of them installed from the factory with the original rom, but none now. I don't know if the rom flash wiped them and didn't reinstall, or something else did. It worked so I never checked after flashing. I suppose I could find someone else with a HD2 and have them send me copies of all there certs.
Click to expand...
Click to collapse
have you called t-mobile tech support to report the problem???
Hi
I use a Qtek 9090 and just tried installing ginderbread on it. Did everything as instructed, but the unit seems to be running a continuous script with errors. I tried this several times and left it overnight to no avail.
Do I need to upgrade my operating system before I do that? If I do, could you please give a step by step instruction on this? Have downloaded the wm 6.5 rom, but don’t know how to go about the upgrade.
Thanking you in advance