Sounds like others, after using the Cheetah unlocker, I'm stuck with radio v 1.16.00.00 on my Treo 750.
I've read the instructions about updating the radio and downloaded them from http://forum.xda-developers.com/sho...ocked) Treo 750 with WM6.
What am I missing?
Of interest, I downloaded Treo750_2_23_ROW_EN_DesktopUpdater.exe and tried to install it.
I get the 'unsupported' pda errror.
I figured it out. Hopefully this will help someone else.
You need to rename the file to CHEEIMG.nbh
Related
so I lost my tricked out mda and got a new one from my insurance and I've beeen trying to upgrade to wm6 and I've been having so many problems. I downgraded to the love rom and tried to cid unlock it and when I try using my cooked roms they don't seem to install because the love splash keeps showing up and its still running wm5. I don't know if I'm even cooking the roms correctly because it been a while since I cooked a rom and the kitchen was not working properly and I even downloaded a new kitchen. I even tried installing a premade rom and it still it boots up as the love rom. my ipl is 1.26 and the spl is 2.26. can someone please help.
hello
did you succeed in cid unlocking the wizard ? Because i had the same issue and, after unlocking my pda properly, all worked fine. u could also try to install a t-mobile wm5 official rom.
I think I cid unlocked it, I ran lokiwiz and when I try to run it again it say theres an error.
What is the process for restoring the factory T-Mobile ROM?
I have an T-Mobile SDA which shipped with:
ROM Version 1.0.14.0
Operator Version 1.9.19.16
Radio Version 4.0.13.20_01.09.00
IPL ?
SPL?
First I upgraded to:
ROM Version 2.0.9.0 (Qtek 8300)
Operator Version 2.5.322.1
Radio Version 4.1.13.28_02.61.01
IPL ?
SPL?
Finally, I upgraded to:
ROM Version Windows Mobile 6 for Tornado Perfect English Edition
Operator Version 10.0.0.15341
Radio Version 4.1.13.28_02.61.01
IPL 2.00
SPL 2.00.0008
I have no idea what the SPL/IPL versions were in the original ROM.
I need to return the phone for a swap under warranty (unrelated to flashing)
I have seen conflicting posts about whether or not there was a problem reverting to an older bootloader, etc. Most of the posts seem to be referring to the UK SDA (Typhoon), not the US SDA (Tornado). But they are similar enough that the concerns might be valid.
So the question is... How do I get back the SDA back to "factory fresh?" I have the original T-Mobile ROM. I downloaded it from HTC months ago. Is it as simple as running the original EXE, or will I need to jump through hoops?
Thanks for any help you can give.
dc
Use TyphoonNBFTool and open the nbf file in your original ROM, you will see the versions
The Dopod 577w AKU2 ROM for my Tornado comes with IPL and SPL, so if your ROM comes with it, then it will be patched. Just run the ROMUpgradeUtility.
Here is what TyphoonNbfTool gives me.
So, since it shows IPL and SPL are in the ROM, I don't need to worry about being able to downgrade?
Also. by going from WM6 to WM5, do I need to launch teraterm and "FORMAT BINFS" again?
Hi,
i have Treo 750 want to unlock!!
IPL:0.20
SPL: 0.24.0000'
i try with Cheeta unlocker and MAGIC Unlocker, both not work.
it this because of the new SPL0.24??
can anyone give me instruction how to please!!
thanks
i had same problems with my treo. first like oli says in his first post about hard spl make sure you have net compact framework 2.0 on your computer. what worked for me was in your c drive there is a folder called tempche. delete that file then run unlocker again. i only did first step on my treo just so it would be hard spl'd. never did step 2 and so on cause i didnt feel a need too.
thanks man, just delate the tempche folder then everyhting run smoothly.
cheers
Good for you!
Hi:
Where do you find the SPL and IPL information?
And can you tell me what SPL actually is?
Thanks!
spl
im not sure about what spl means but i do know that you need to have it done in order to install a cooked rom. it basically unlocks your phone so you can flash different roms that the chefs cook. there really isnt to many people cooking roms for the treo. theres only about 3 or 4. i think everybody got different phones so thats why your not getting responded too very quickly. i too have a tilt and a treo and i like to bounce back and forth between phones. i have the wm 6.1 lite rom on my treo. if your looking at just upgrading from wm 5 to wm 6 you dont need to do a hard spl. stock roms allow you to flash without unlocking your phone. im not a computer genious here but i will try and assist you however i can. ive been in your shoes before trying to figure all this stuff out.
i forgot to answer your question about where to find the spl. it shows up in your bootloader screen. you can see it by pressing down the lower left side button and pushing soft reset which is located on the other side where you put your mini sd in. there is a small whole that you use your stylus to push in. you can just soft reset again to get out of the bootloader screen.
helpeee
i used cheeter unlocker. I
did step one and two
successfully. But at the end i get
the debug error which some
people got. So i copied htc herm
unlock v3 to the phone. I ran it
from phone and selected sim
unlock and it was succesfull. But
when i turn on radio, i get "you
have tried 5 times, wait for time
out ****".
Please anyone, what am i doing
wrong, or what should i do to
unlock my machine?? It has wm6
from at&t.
_________________
I have a Treo 750v - UK Vodafone which i unlocked using cheetah unlocker, even though i managed to get to step 3 on the cheetah unlocker which should flash radio back to original, it didnt.
Problem im having now is that the phone works on Orange and T-Mobile UK but no longer works on Vodafone and O2 UK.
Im assuming this problem is with the radio, how can i remove this?
I have tried the method with a MiniSD card, it flashes the bootloader but still gives me the same problem and Olipro Hard-SPL 1.40 is still on the phone
Does anyone have a solution PLEASE? or a workaround so i can get at least Vodafone working again?
Hi, I've been to the wiki page and downloaded the cid unlocker, T-Mobile rom, Lokiwiz and the Hornet 6.1 rom. I actually wanted a touch flo rom but every link seems to be dead. My ipl and spl are both 2.16.0001 so I have a G4. I have recently changed providers (I'm in New Zealand) so I take it my phone must be unlocked?
My problem is I'm using Windows 7 and so the windows mobile centre but when I use the "custom-ruu-wizard-1050412" program. I get part way through the installation and windows tells me the program has stopped working and recommends I close the program or check online and when I check online it just shuts down...help!!!
What am I doing wrong?
Cheers Matt