Hi , i am trying to upgrade the rom on my wizard to wm6.
some info about the pda: spl = 2.24 (Mr Clean), Pls 3.08
i am trying all the rom none of them work i can run them but they don't change my wizard.
i would like to install wm6 + touchFlo on the wizard please your help.
my e-mail : [email protected]
Thank you
CID unlock Your device.
ba_ronen, do you have brain damage?
How many people have to give you the same answer before you listen?
You posted the SAME question in the XM6R4 thread and I replied here:
http://forum.xda-developers.com/showpost.php?p=1690298&postcount=98
and you posted this thread AFTER that response.
famewolf said:
ba_ronen, do you have brain damage?
Click to expand...
Click to collapse
That's not nice...you were a n00b once too.
Related
Hi!
I've tried several WM6 upgrades posted in the forum, either the upgrade is unsuccessful or the ROM is not aplied to my phone.
Tried the Kitchen v.2, Core 2 etc etc
I'm sure It's not operator-locked!
Do I have to upgrade the OS, SPL and IPL manually with separate roms?
Please help me!
I want wm6 with as many options (progs) as possible!
Is there any ROM out there that I can apply on my phone?
My phone:
Qtek 9100
WM5 OS 5.0 (5.1.195 Build 14847.2.0.0)
OMAP850-195MHz
ROM-version: 2.17.7.1 SVE
ROM-date: 2/13/06
Radio: 02.61.11
Protocol: 4.1.13.28
ExtROM-ver: 2.17.7.103
If you get Error 300 when upgrading then u have to get rom update utility for G4 (probably) (Look carefully in Core 2.0 thread - the first post, there is G4 Users chapter)
If your rom is not flashed but the process goes to 100% complete then probably you have CID locked device, but anyway let the gurus give their advices.
I'm sure that It isn't CID-locked (if that is the same as operator-locked)!
Nope, CID locked is different than SIM Locked
Ok!
How do I unlock It ?
What I understand one must first identify G# or G4, but how?
The only information I've got is listed in my first post.
/Mike
mostberg said:
Ok!
How do I unlock It ?
What I understand one must first identify G# or G4, but how?
The only information I've got is listed in my first post.
/Mike
Click to expand...
Click to collapse
Read this and all will be explained:
http://forum.xda-developers.com/showthread.php?t=298613
mfrazzz said:
Read this and all will be explained:
http://forum.xda-developers.com/showthread.php?t=298613
Click to expand...
Click to collapse
Great! Thanx!
Hello people.
Yesterday i tried to upgrade my i-mate JAMin to WM6 but i couldn't do it.
anyway, because i couldn't upgrade it to WM6, after i upgrade to 2.40 WWE when i arrived at home i've tryed to upgrade to 2.13_Portuguese_ROM...
Here was when the problem started.
When updrade started, at 1% the problem ocurred... message ERROR.
From what i've read I need a flash ROM, I'm desperate...
Can any one help to find the flash ROM and how to recover my PPC?
Best Regards
Thank's in advance.
(Faria, ajuda-me! sei que podes fazê-lo nem que seja orientando-me em português...)
where did you get 2.40 WWE
you need No Vindor ID to install the ROM
please give your IPL SPL (G3 or G4), what error message?
but your problem can be solve I'm sure, don't do anything you don't know what it is
ask before every step !!!!!!ok
Again, would people please read through the forum carefully before starting a new thread and ask the same questions over and over again. It is not that I am mean (just getting old), because any new thread will take time to read. Why not the person who need answer to read first and save other people's time. I found this forum contains so much information that most problems people generally ask are well covered one way or the other.
you may right, but human is talking here, we are not machines, human did mistakes and sometimes even if read it new people hard to get it, they need it step by step
if you don't want to help please don't reply, leave it a lone and it will go to the end with no replies
I've seen a lot of replies like yours witch they are not nice I think they have to be deleted
sorry for beeing rude, but we are human
paradis_pal said:
where did you get 2.40 WWE
you need No Vindor ID to install the ROM
please give your IPL SPL (G3 or G4), what error message?
but your problem can be solve I'm sure, don't do anything you don't know what it is
ask before every step !!!!!!ok
Click to expand...
Click to collapse
Hello paradis, and everyone else.
Thank you for you quick reply and support.
Starting to answering your questions:
- My i-mate is G3
- ERROR [320~328] : INVALID COMMAND
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.
About the ROM 2.40..., i'm confused and since i can't read my i-mate i don't know the correct version but it was downloaded here in this forum.
Regards
reinstall the 2.20.7.37 wwe using the NO VINDOR ID NVID
look for RUU_Prophet_220734_2207114_024721_NVID.exe you can find it here
then unlock CID see the WIKI how to
and then install any ROM you want
What is you SPL Version?
NetrunnerAT said:
What is you SPL Version?
Click to expand...
Click to collapse
this not SPL problem
the arror at 1% is becasue of changing the langauge he just need NO VINDOR ID
that is all
and I want him to unlock CID, please do my steps
If he have SPL 3.08 -> CID Unlock doesnt work -> Device report wrong DeviceID and CID ^_^
paradis_pal said:
reinstall the 2.20.7.37 wwe using the NO VINDOR ID NVID
look for RUU_Prophet_220734_2207114_024721_NVID.exe you can find it here
then unlock CID see the WIKI how to
and then install any ROM you want
Click to expand...
Click to collapse
Thank's paradis_pal
My i-mate came back to live, tank you so much.
I fallowed your instructions and the problem was solved.
Best Regards.
As i said, my i-mate is biack to life.
I try to unlock CID, but the link ftp://xda:[email protected]/Uploads/Prophet/pdamobiz.com_downgrade_and_unlockcid.rar is not working.
Can any one put it on working?
NetrunnerAT said:
If he have SPL 3.08 -> CID Unlock doesnt work -> Device report wrong DeviceID and CID ^_^
Click to expand...
Click to collapse
dear net if he has 3.08 the 2.20 will not be installed, I know what I'm writting
but thanks for the advice
I think you can find it at pdamobiz.com
but please unlock cid before doing anything
paradis_pal said:
I think you can find it at pdamobiz.com
but please unlock cid before doing anything
Click to expand...
Click to collapse
Hello.
Sorry for responding so late.
Right now my i-mate is Cid Unlocked and working with WM6 Prophet_4.0.0.0.3_PV just fine.
I´m Going to try and explore this (Beautifull) Rom and post my feedback.
Once more thank you for your help, atention and support.
Best Regards.
msylva said:
Hello.
Sorry for responding so late.
Right now my i-mate is Cid Unlocked and working with WM6 Prophet_4.0.0.0.3_PV just fine.
I´m Going to try and explore this (Beautifull) Rom and post my feedback.
Once more thank you for your help, atention and support.
Best Regards.
Click to expand...
Click to collapse
As I said before, the feedback for this rom is just... GREAT.
Better than this only if it was in Portuguese (for me, off Corse), because in these rom theres no Portuguese GPRS configurations.
Regards.
I have a locked tmobile mda... I forget what I need to do b4 I can flash a new rom... I think all I have to do is CID unlock it right? But I forget how. Any help would be great
why not to read "sticky" threads on the top!!!
cgigate said:
why not to read "sticky" threads on the top!!!
Click to expand...
Click to collapse
Yes the fastest one way to figure this out again is to read the stickies labeled unlocking and UPGRADING. That is usually pretty helpful.
help wanted
dharvey4651 said:
Yes the fastest one way to figure this out again is to read the stickies labeled unlocking and UPGRADING. That is usually pretty helpful.
Click to expand...
Click to collapse
hi ive tryd to up to wm6 but no luck ive read all the info on how to doit downloaded loads of software still no good ive managed to put wizard love rom on it for now but cant get round the cid unlocking then how to up aput wm6 on
ive tryd it but dont want to kill the phone could some one make an ruu of wm6 then upload it or dont it work that way
any help would be great please and thank you
device info
mda vario
rom ver 2.26.10.2 wwe
rom date 6/7/06
radio ver 02.25.11
protocol 4.1.13.12
ext.rom ver 2.26.10.105
i just started going to this forum and I'm just looking for a way to get WM6 on my MDA. I know there are some posts here but I don't understand a lot of this flash rom things? Could someone help me ain directing me to a trustworthy post on how to upload WM6 on my MDA? thanks!
read the stickies...
especially
How to flash a new ROM to your Wizard... a little tutorial!
VWGolf2.OHH said:
i just started going to this forum and I'm just looking for a way to get WM6 on my MDA. I know there are some posts here but I don't understand a lot of this flash rom things? Could someone help me ain directing me to a trustworthy post on how to upload WM6 on my MDA? thanks!
Click to expand...
Click to collapse
Which is your device, a G3 or G4,how come we can tell,untill and unless you do not post the vital data of your phone,no one can suggest you any help without knowing the version of your phone.always post the data.
Well 'trustworthy post on how to upload WM6 on my MDA?',why ?,do you think what all is posted here in this Forum is not Trustworthy.
Very rightly said by moseslin 'Read The Stickies',you'll find all the answers here, just "Help Yourself"
bill4676 said:
hi ive tryd to up to wm6 but no luck ive read all the info on how to doit downloaded loads of software still no good ive managed to put wizard love rom on it for now but cant get round the cid unlocking then how to up aput wm6 on
ive tryd it but dont want to kill the phone could some one make an ruu of wm6 then upload it or dont it work that way
any help would be great please and thank you
device info
mda vario
rom ver 2.26.10.2 wwe
rom date 6/7/06
radio ver 02.25.11
protocol 4.1.13.12
ext.rom ver 2.26.10.105
Click to expand...
Click to collapse
which DOC chip version you got,a G3 or G4 ? to verify post your IPL/SPL...? or download the WST Tool,install and run it and post the report to determine if it's a G3 or G4 device.You can download the WST tool here :-
http://forum.xda-developers.com/showthread.php?t=329170
If it's a G3,it's required to first CID unlock the device and than upgrade to wm6.
How to CID unlock,check this guide here :-
http://forum.xda-developers.com/showthread.php?t=285435
http://forum.xda-developers.com/showthread.php?t=263116
But if a G4,read here how to upgrade :-
http://forum.xda-developers.com/showthread.php?t=329147
Good luck
Dear All,
I would like to thanks everyone for contributing to this forum. It is an unbelievable point of knowledge. However I am one of those that are not too tech and I would like someone to guide/tell me how I can update my HTC TYTN II on 3 UK network to the latest Windows Mobile 6.1 Pro.
My phone is unlocked and this is the information I do have about the phone:
KAIS130
SPL-1.94.0000
CPLD-8
R 1.27.15.32
G 22.51.88.13h
D 1.89.00.00
Thank you very much in advance.
makedoc
NO one will or should help you until you seach like you should have in the beginning...
Notice all the the "should haves"!!! Try the search function at the top of the forum and if you can't answer your own question in 10 minutes then post again...
ryncppr said:
NO one will or should help you until you seach like you should have in the beginning...
Notice all the the "should haves"!!! Try the search function at the top of the forum and if you can't answer your own question in 10 minutes then post again...
Click to expand...
Click to collapse
Dear ryncppr
Thank you for your input. I have search the forum but as I mention I am not a tech person and if is not too much to ask my questions are:
1. Due to my phone is not locked do I have use HardSPLv1 first before upgrading to win 6.1?
2. As there are no win 6.1 upgrade for the 3 UK what can I use instead?
Many thanks
makedoc
makedoc said:
Dear ryncppr
Thank you for your input. I have search the forum but as I mention I am not a tech person and if is not too much to ask my questions are:
1. Due to my phone is not locked do I have use HardSPLv1 first before upgrading to win 6.1?
2. As there are no win 6.1 upgrade for the 3 UK what can I use instead?
Many thanks
makedoc
Click to expand...
Click to collapse
1-yes start here: http://forum.xda-developers.com/showthread.php?t=396922
2.there is no WM 6.1 for 3 UK .you have latest update.
ROM version: 2.50.771.0 WWE
ROM date: 03/10/08
Radio version: 1.27.15.32
http://www.three.co.uk/business/devices_/detail_view.omp?d=1204798087914
korakesion said:
1-yes start here: http://forum.xda-developers.com/showthread.php?t=396922
2.there is no WM 6.1 for 3 UK .you have latest update.
ROM version: 2.50.771.0 WWE
ROM date: 03/10/08
Radio version: 1.27.15.32
http://www.three.co.uk/business/devices_/detail_view.omp?d=1204798087914
Click to expand...
Click to collapse
Thank you for the guidance.
Dear all,
thank you alot for your help but i have a question i am reading the wiki and the threads here but i can't find answer yet
the question is that i have a Kais 100 tytn II
and i want to flash a new cooked ROM , when i pressed the camera button with the soft reset i found this Info:
KAIS 100
SPL-3.29.0000
CPLD-8
am using WM 6.1
ROM version : 3.29.422.1 WWE
Radio version: 1.65.20.29
so now should i install any hard SPL or i can now Flash my cooked ROM ??
and how can i backup my contacts??
what is the steps to install new cooked ROM
Thanks alot in advance sorry for being dummy but this is my first time to hold HTC windows mobile phone
thanks again
loly2002 said:
Dear all,
thank you alot for your help but i have a question i am reading the wiki and the threads here but i can't find answer yet
the question is that i have a Kais 100 tytn II
and i want to flash a new cooked ROM , when i pressed the camera button with the soft reset i found this Info:
KAIS 100
SPL-3.29.0000
CPLD-8
am using WM 6.1
ROM version : 3.29.422.1 WWE
Radio version: 1.65.20.29
so now should i install any hard SPL or i can now Flash my cooked ROM ??
and how can i backup my contacts??
what is the steps to install new cooked ROM
Thanks alot in advance sorry for being dummy but this is my first time to hold HTC windows mobile phone
thanks again
Click to expand...
Click to collapse
Hi,
You still need a Hard SPL. The SPL you have is 3.29 but is the OEM version.
Download and Flash a 3.* HardSPL from the Sticky thread.
Backing up contacts can be done over active sync or using PIMBackup.
This section of the Wiki explains the ROM upgrading process: http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser#ROMx20.Upgrading
Ta
Dave
DaveShaw said:
Hi,
You still need a Hard SPL. The SPL you have is 3.29 but is the OEM version.
Download and Flash a 3.* HardSPL from the Sticky thread.
Backing up contacts can be done over active sync or using PIMBackup.
This section of the Wiki explains the ROM upgrading process: http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser#ROMx20.Upgrading
Ta
Dave
Click to expand...
Click to collapse
Thank you so so so so so so so much
i really appreciate your help