WEP(open) EAP-PEAP Not connecting to Wifi - HTC Tornado

I am having problems setting up my WiFi connection with my SDA (HTC Tornado ...Tmobile unlocked) with Windows mobile 5 and i cant find a solution..please help me...
When using my laptop wifi connect I set up the following
Network Authentication OPEN
Data Encryption WEP
key is automatically provided (i tick this option)
Enable IEEE 802.1x authentication for this network
EAP Type as PEAP.
Then under configuration of PEAP I uncheck Validate Server Certificate and authentication method selected as "Secured password (EAP-MSCHAP v2) and "enable fast reconnect" is also ticked.
With these settings it works perfectly well in laptop. But with these settings made in the SDA phone it gives the following error msgs ; "The server certificate is issued by an unknown authority" and "Cannot log on to the wireless network. This network requires a personal certificate to positively identify you."
I have done the registry edit (adding DWORD ValidateServCert=0). It stopped showing the message ""The server certificate is issued by an unknown authority". But the other msg still comes. Actually for PEAP we wont want personal certificate. I think this is a bug. Then i installed a dummy personal cert to cover this bug. Now no more error msgs, but internet is not connected.
Then i installed the root certificate (specific for my univ) i got from my laptop (windows xp). But no effect. I checked under root cert to see if it is there and i saw it there.
Sorry for this long story sometimes we need long explanations to fully understand the problem.
SOMEBODY PLEASE HELP ....

try using a key that is not provided automatically. May not be the fix you want, but it works for me (never tried doing it your way).

Related

Kaiser bluetooth mac internet settings

I have been playing with my new Kaiser(Tilt) since I got it earlier in the week. Rom is updated and everything is the way I like it. I would like to have my mac to connect to my Kaiser with bluetooth for internet access I just don't know what the AT&T setting are:
-telephone number
-account Name
-and password
I have looked all over and nothing I can find works. The Mac tells me
-A modem error occurred. Please verify your settings and try again.
What can I do to get this working? What setting are you using to make theis work for you?
You have to enable the Internet Sharing app. You can either find it in the Windows folder (IntShrUI), or you can do as I did and perform a hard reset but kill all the carrier customizations. By default, AT&T removes the program shortcut from your Programs folder. Here are some instructions, courtesy of the AT&T forums:
(1) From the Mac, initiate the pairing process with the phone. It will say the phone doesn't have any supported services, but then the last page of the Bluetooth wizard will say it supports a Personal Area Network.
(2) Open the "Internet Sharing" application on the phone.
(3) Change the method used to connect the computer from "USB" to "Bluetooth PAN".
(4) Click "Connect".
(5) On the Mac, click the Bluetooth menu on the Menu Bar and select "Join Network on [device]". (The Internet Sharing app on the phone should now say "Connected".)
Need more info
I got that part down, thanks. It's when it is trying to connect it imideatly disconects and tells me - A modem error occurred. Please verify your settings and try again. What are the settings on the mac side for
-telephone number
-account Name
-and password
Bluetooth PAN doesn't require those settings. It looks like what you're after is Bluetooth DUN. I believe you'll need to use the WModem app that's in the Connections tab. These should be the settings you're seeking:
Type [email protected] in the User name field.
Type CINGULAR1 in the Password field.
In the Dial field, type *99#.
thespiessman said:
I got that part down, thanks. It's when it is trying to connect it imideatly disconects and tells me - A modem error occurred. Please verify your settings and try again. What are the settings on the mac side for
-telephone number
-account Name
-and password
Click to expand...
Click to collapse

Internet Connection Permanently Killed??

Is it possible to permanently affect my Wizard's internet connection by over flashing??
I'm having a problem connecting to the internet. It doesn't connect via WiFi whether on an open or WEP network (I'm testing it with 2 routers -- mine and my neighbors). It connects to GPRS just fine as long as I put the right ISP info. But when I try to load a page in IE it comes back with 1 of 2 error messages:
1)
Error 502 - Bad Request
The server could not resolve your request for uri:
2)
Cannot obtain a server-assigned IP address. Try again later or enter an IP address in Network settings.
I was running a custom made vanilla 1413 for the longest time. Then yesterday tried MFrazzz's 1913 and now ANTC's. Between one of those two I am not unable to connect to the internet. I even flashed back to the 2.24 official T-Mo ROM and even with the factory settings it still not working for either GPRS or WiFi. In the past hour I've tried T-Mob official, ANTC 2.0 and XM6R4...all the same problem.
So that virtually eliminates the possibility that it was either a bad radio, corrupted Ext ROM or a bad flash. It definately seems like my Wizard isn't being given an IP address. So that would be a software/ROM/registry problem, right? Well then why is it not working with 3 fresh ROM flashes??
Any suggestions??
If I connect it to my PC via usb/activesync and use the PC's internet connection then it will go ahead and load webpages.
As soon as I disconnect the USB cable then it'll load up the GPRS connection and try to load a webpage and timeout with one of the errors above.
One strange thing I noticed is that when it gives the 502 error it removes the domain from the uri. Example:
Target URI:
http://mobreader.com/proxy.aspx?s=http://test.com...
Response:
Error 502 - Bad Request
The server could not resolve your request for uri: /proxy.aspx?s=http%3A%2F%2Ftest%2Ecom...
seems your proxy is not functioning correctly
reflash with original rom and then this rom you would like
you can also try and delete all connections but i doubt it helps..
I'm on T-Mobile full internet plan, not T-Zones or anything, so no need to set a proxy. Just put in the access point as wap.voicestream.com and it should work.
I've input the data manually as well as tried with the t-mobile wap setting cabs. Doesn't make a difference. Also since these are freshly installed ROMs (including an official T-mobile ROM) there shouldn't be any proxy settings pre-set, right?
yes i am aware of that..
i need to explain myself more , sorry for that..
what i mean is the proxy inside the phone , not the one u setup with t-zones
or any related..
Ok a little update...
I was able to connect via Wifi this morning, it was either
A) Registry changes to HKLM>Comm>TNETWLN1>Params>HTCPreloadStatus to value of "1"
B) Registry change to HKLM>Comm>TNETWLN1>Params>HTCPreloadWifi to value of "1"
The router assigned me an IP address now and fully connected. I'm able to pull up websites now. Sometimes the above registry settings mysteriously change back to "0" value and if that happens then I won't be able to pull up a website. So I know what was causing the WiFi issues.
But still don't know what's the problem with GPRS. Still can't load a website via URL or even IP address. Is there a similiar registry edit that I can make that will restore GPRS connection ability?
Thanks in advance guys.

Fuze - VPN to Compnay Network - Remote Desktop Works, Intranet browsing does not

I have the AT&T Fuze with the stock ROM. I purchased it the first day it came out. I think this was 11/11/2008. I have the PDA Personal plan for unlimited data. I have things set up so that my contacts and email synch with our Exchange server. I can remote desktop from my Fuze using the data network to any machine that I can remote to from my computer, so from that, I am thinking VPN must be configured correctly. On one of these machines that I connect to, I have IIS running and put a very simple web page on it (no script, nothing IE specific). From my work computer, it loads fine. I can remote desktop from my Fuze to any machine on the network and launch IE and load it. But, I can't load it directly from my Fuze in either Opera or IE. It does initiate the VPN connection. But, then I get the error HTTP gateway timed out. I'm really not interested in viewing the page that I created. We use Perforce, which is source control system. It has a jobs portion, which we use to track bugs. There is a web interface to the jobs, which is on the intranet, not internet. I don't have rights to remote to the Perforce server, and that is why I initially tried putting a simple page on a machine that i am an admin on. I want to be able to click on a link in my email and have it load the bug in Opera. If I am home and turn on WiFi, and disable the data network, this works fine. This bypasses AT&T's machines, which makes me think there is something that AT&T is blocking. And if they are, then maybe it is the AT&T bloat this is telling them what it is. Our IT guy has verified that I am successfully VPNing in. He is seing the mycingular.net in the firewall.
My boss has the same phone, but purchased more recently, and his is working fine for this. He has flashed the new AT&T test ROM, and done the thing that keeps the AT&T bloat from getting installed.
The fact that remote desktop works, but browsing a webpage on the same machine does not, makes me think there is more to this than just network settings.
If anyone has the anwer to this, please share. If I find the answer, I will post it is well. I have extensively searched the forum for the answer to this, and have not found anything that worked. If I have missed something, I appologize.
Sort of works now, still have an issue
After going to the proxy tab, and checking that This network connects to the Internet and checking the check box that this network uses a porcy server to connect to the internet. Then specify the server. Then go to Advanced and change the HTTP port to 8080 instead of just 80. I also put the user id, password and Domain in on the proxy for HTTP.
But I get prompted for a user id and password from the proxy erveer. I have entered it and clicked the checkbox to save it. It does not display the same info that I entered the next time and it does not display what was entered on the HTTP proxy page. It is a drop down, and I can select the correct one. It's just annoying to need to. I'd like to clear this cache.
Also, to initially get it working I had to disable HSDPA and HSUPA, restart. Then reenable it. I have the registry on my Fuze which give me the menu option on the Advanced network tab to do this.
Figured out how to clear the cache issue - still prompts
The cache was a setting in Opera for passwords.
It still asks for the password. At least it is prefilled with the correct info, since I now only have the one entry, so it is just 1 click, but I should not need to do this step.
Any one know what I need to do to fix this.
If I try to load it in IE, it just tries but never succeeds and never asks for a password, just says Opening.
Connections
Why should I need to set this to connect to the Internet, and use the ISA server? I would think if it needs to connect to the internet, it should be able to just use the Media Net
My Media Net Settings are
Modem -
Name - Modem
Media Net - wap.cingular
Advanced shows the modem in the drop down list as Cellular Line (GPRS, 3G)
The drop down is disabled
Next
Access Point Nam - wap.cingular
Next
User name - [email protected]
don't know what the password is. I've never changed it.
Domain is blank
Next
TPC/IP
Use server - assigned IP address is selected
Use software compression and use IP header compression are checked.
Use slip is not checked and the checkbox is disabled
Servers
Use Servr Assigned addresses is selected
So DN,Alt DNS, WINS, and ALT WINS are disabled.
Proxy Settings
This network connects to the internet
This networks uses a proxy server to connect to the internet is not checked.
More info and additional question
Navigating to some intranet sites does not prompt me for the isa server.
such as http://machine/virtdir/Default.aspx
seems to work without being prompted
but
http://perforcemachine:8080/@md=d&cd=//&[email protected]//?ac=107&mx=25
prompts me for the password.
Also, in order to get either of these links to work, I need to have in my exceptions:
*.companyname.com/*
Where companyname is the actual companyname.
This is annoying because it makes it connect to the VPN when synching with the exchange server. Before I want on the quest to get these links to intranet sites to work, I synched with the exchange server without connecting to the VPN.
I've tried putting in isa.companyname.com in the exceptions, but that doesn't work.
Is there a way to do *.companyname.com/* except mail.companyname.com?
I suspect all of this is in the registry somewhere.

VPN Setup for Advantage X 7510

I need some assistance on setting up VPN access to my corporate network on my X 7510. I am technologically barely savvy. I am a business user of my X 7510.
Can someone please help me in configuring my device to access my corporate VPN?
The following describes my attempts to configure the VPN settings using the standard VPN configuration available on the device:
I am using the settings given by my network team. We are using a pre-shared key and no certificates. Our corporate VPN uses CISCO ASA 5520. When I setup the VPN there is an "Advanced" option that asks for certain server IP addresses. Our network team says that this need not be used.
I am trying to connect over a GPRS network. The most frustrating part is that the IT Manager uses an iPhone and he downloaded a VPN client for 9 dollars from the Apple Store and it works beautifully !!!
But I am not able to connect and I get an error message that says that there is a problem with my user name and password. The message asks me to turn off and turn on my device to see if that fixes my problem. But it does not.
I have triple checked all the setting details with our network team and all the data are correct. My network team can monitor connection attempts and they say that they are not even able to see any connection atempts from my device.
Can somone please help me?
I Think it depends on the rom you use. If that vpn package is there.
I also have a problem with my VPN on x7510. I think I get all the settings right because it says I am connected to my corporate network. Our network administrator from the network monitoring desk actually sees me connected. But I cannot access any application on the network, not even my company's intranet homepage.
Another irritating part is that when I fire up any application that requires internet access but not VPN - like Nimbuzz, the VPN starts to connect through GPRS - very annoying. So I have now set up the VPN to disallow internet access.
rsawoseyin
Can you please share how u have setup the VPN? I am not even able to connect.
Isn't there anybody else here who can assist?
My roms have vpn capabilities, if you go to connection at the bottom it has "set up vpn" (or something like that)

WIFI authentication problem after heartbleed

Hi!
I'm not able to login into my university's wifi network after they changed certificates for the heartbleed bug.
I can access to the network with all my other devices (nexus 7 2013 and macbook pro) but not with my moto g.
My university has 2 wifi networks called "USI" and "USI-5", if i'm not wrong USI-5 has an additional layer of encryption.
When I try to connect to USI, it says "Authentication problem" but USI-5 is not visible anymore from my moto g.
There's a way to check if it is trying to use an old certificate? I tried to to "Forget Network", reboot, airplane mode.. etc.. with no success.
The strange thing is that when I forget USI and try to reconnect again, it doesn't ask me for my username and password, that should be normal since it is a close wifi network.
I checked the file on /data/misc/wifi/wpa_supplicant.conf --> USI-5 is not listed (probably because I removed it) and USI looks like this
network={
ssid="USI"
key_mgmt=WPA-EAP IEEE8021X
eap=SIM AKA
priority=72
proactive_key_caching=1
}
lucaurso said:
Hi!
I'm not able to login into my university's wifi network after they changed certificates for the heartbleed bug.
I can access to the network with all my other devices (nexus 7 2013 and macbook pro) but not with my moto g.
My university has 2 wifi networks called "USI" and "USI-5", if i'm not wrong USI-5 has an additional layer of encryption.
When I try to connect to USI, it says "Authentication problem" but USI-5 is not visible anymore from my moto g.
There's a way to check if it is trying to use an old certificate? I tried to to "Forget Network", reboot, airplane mode.. etc.. with no success.
The strange thing is that when I forget USI and try to reconnect again, it doesn't ask me for my username and password, that should be normal since it is a close wifi network.
I checked the file on /data/misc/wifi/wpa_supplicant.conf --> USI-5 is not listed (probably because I removed it) and USI looks like this
network={
ssid="USI"
key_mgmt=WPA-EAP IEEE8021X
eap=SIM AKA
priority=72
proactive_key_caching=1
}
Click to expand...
Click to collapse
I solved the problem by modifying network settings as follows: EAP method: PEAP, phase 2 authentication: none

Categories

Resources