Is there a way to floash the rom while connected thru the USB port?
That's how it's typically done, if I'm understanding your question and whatnot.
Establish Activesync, then run the updater from your particular carrier. It will put the device in bootloader mode and send the ROM image to the device.
zhzaen said:
Is there a way to floash the rom while connected thru the USB port?
Click to expand...
Click to collapse
What if you just have the rom image, not the installer? Is there a bootloader you can run on your pc and flash the rtom thru the usb cable?
Related
So I have a Galaxy S 4G that I can not get to be recognized by my computer via USB. It charges fine but always get "USB device not recognized". It's on stock froyo and I have tried several cables and computers as well as versions of drivers so I assume it's a faulty usb port on the phone.
I looked at this thread : http://forum.xda-developers.com/showthread.php?t=1099374
And it seems that it was possible to flash cwm from recovery and then flash a custom kernel that gave root access? But links have been removed and thread closed and replaced by one that requires gingerbread. Does anyone know of any way to root on froyo without usb cable? or have the files that were removed from the thread above?
Any suggestions at all?
Fix your USB port.
try heimdall?
Visit your local library and use a computer there to root. Having fun isn't hard when you got a library card.
pisherthefisher said:
Visit your local library and use a computer there to root. Having fun isn't hard when you got a library card.
Click to expand...
Click to collapse
Most free-to-the-public computers are so locked down that I doubt he'll be able to get drivers installed.
FBis251 said:
Most free-to-the-public computers are so locked down that I doubt he'll be able to get drivers installed.
Click to expand...
Click to collapse
The ones in smaller towns usually aren't, or their security is easily bypassed with ctrl-alt-delete or similar combinations
thanks for the responses but it seems that I need to clarify that it looks like it's the usb port on the phone that is defective and not the computer. My Galaxy s3 and tab 7.7 connects just fine with odin using same computers and drivers that I can't get to recognize this phone.
And yes I did try heimdall but since the computer does not see the phone heimdall won't either
Nothing else I can do to get root? I would not mind about being stuck on froyo I just need root to install vodoo sound.
^ How do you charge your phone if your USB port is busted?
If it is charging well, then I suspect there is a conflict in drivers.
Rebel_X said:
^ How do you charge your phone if your USB port is busted?
If it is charging well, then I suspect there is a conflict in drivers.
Click to expand...
Click to collapse
If the power and ground pins are active, it will charge, but if the data +/- pins arent' connected, you can charge but not transmit data. My USB cord did that to me, will charge, but won't show "usb mode" to connect for usb storage. Thought it was the rom, flashed 4 times, realized the cord must have a break in the VCC+/- wires.
Hello everyone,
i bricked my HTC One S device. There's no OS on it right now, but i can access bootloader (says HBOOT-2.15, S-ON, unlocked, RADIO 1.15.50.05.29) and CWM Recovery (v6.0.4.8).
It should be no problem for me to install another ROM, but: I can't establish a USB connection.
I tried it on multiple computers, with the proper HTC drivers installed on each but the device won't show up even in windows device manager. When in fastboot mode and connected to an AC power supply it doesn't even say "FASTBOOT AC", but the usb cable is definetly not broken!
anyone got an idea?
thanks in advance
Maybe try USB OTG?
808phone said:
Maybe try USB OTG?
Click to expand...
Click to collapse
also doesn't work
I would try and find a computer that you really know works. Then try again. Otherwise.... JTAG???
Hello, I have a galaxy S6 where after restarting the factory settings stopped working the USB and Wifi. When I try to update the software via OTA I get the message "Your device has been modified. Software updates are not available".
I have already tried to connect it via USB in recovery mode and even then the device is not recognized on any computer. I also tried a new reset with wipe cache and wipe data but it does not resolve. Do you know any alternatives?
Note: The USB port normally charges and if I connect a pen drive via OTG I can copy data.
Install TWRP by USB from PC, and MTP in TWRP should work.
Tazerick said:
Install TWRP by USB from PC, and MTP in TWRP should work.
Click to expand...
Click to collapse
The problem is that USB is not recognized on the PC. The device only appears as charging.
dentepc said:
The problem is that USB is not recognized on the PC. The device only appears as charging.
Click to expand...
Click to collapse
Then you have broken USB port in phone or in cable.
Try another USB cable, if it's not working u have broken it in phone and there is nothing you can do about it expect a repair.
Tazerick said:
Then you have broken USB port in phone or in cable.
Try another USB cable, if it's not working u have broken it in phone and there is nothing you can do about it expect a repair.
Click to expand...
Click to collapse
The strange thing is: If I connect a pendrive in the device with the OTG cable I can see and copy files from the pendrive.
İ use custom rom and i disabled OEM unlocking and restart my phone. Phone cant boot. My USB port isnt work and i cant use odin. Cant open twrp. Actually isnt broken but my PC cant recognize my phone i try different cable, pc and driver but Windows says unkown device.
nereloyka13 said:
İ use custom rom and i disabled OEM unlocking and restart my phone. Phone cant boot. My USB port isnt work and i cant use odin. Cant open twrp. Actually isnt broken but my PC cant recognize my phone i try different cable, pc and driver but Windows says unkown device.
Click to expand...
Click to collapse
How did you flash TWRP and custom if your USB port isn't working?
Download Mode is independent of ROM so unless your hardware got damaged since flashing custom, there's no reason it shouldn't work
Try installing Samsung S7 driver again, remove old drivers from device manager first while phone is connected / enabled "Show hidden devices" from device manager while phone is disconnected and remove old drivers
Windows should install the correct driver itself
*Detection* said:
How did you flash TWRP and custom if your USB port isn't working?
Download Mode is independent of ROM so unless your hardware got damaged since flashing custom, there's no reason it shouldn't work
Try installing Samsung S7 driver again, remove old drivers from device manager first while phone is connected / enabled "Show hidden devices" from device manager while phone is disconnected and remove old drivers
Windows should install the correct driver itself
Click to expand...
Click to collapse
İ try 4 different PC. İ charge my phone with wall charher but phone see USB charging. İ install twrp with odin but i cant use odin now. Windows says unkown device and odin cant recognize. https://forum.xda-developers.com/galaxy-s7/help/usb-device-recognized-fast-charge-t357118/ its my problem
That link redirects me to here
https://forum.xda-developers.com/showthread.php?t=357118
If you have tried 4 PCs, and different USB cables then you need to get your USB port on the phone replaced / repaired
*Detection* said:
That link redirects me to here
https://forum.xda-developers.com/showthread.php?t=357118
If you have tried 4 PCs, and different USB cables then you need to get your USB port on the phone replaced / repaired
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-s7/help/usb-device-recognized-fast-charge-t3571184/page2 you can see my comment page 2
Hey,
I 100% NEED to Root MY Motorola G Stylus 5G ((2021)) , and it needs to be done without the use of a computer, and preferably without the need of $Payment$//Money...
I know that there are plenty of "FREE-2-DL" Ver. Of almost EVERY ROOTing Software, I just need to know what my best options are for my specific Phone, Make & Model.
Anyone help please???
Thank You!!
You have to use a computer. If no computer, you can use another android phone that's rooted and download termux, install adb-fastboot in termux, plug in the phones together using a female USB to USBC adapter, enable USB debugging, unlock bootloader, install TWRP, and flash magisk.zip
Kalel88 said:
You have to use a computer. If no computer, you can use another android phone that's rooted and download termux, install adb-fastboot in termux, plug in the phones together using a female USB to USBC adapter, enable USB debugging, unlock bootloader, install TWRP, and flash magisk.zip
Click to expand...
Click to collapse
lol