Dear all
while reading the Kaiser reviews on the internet found some reviews states that Kaiser comes with TouchFlo installed.
Is this True?
Please Advice
Regards
shafez said:
Dear all
while reading the Kaiser reviews on the internet found some reviews states that Kaiser comes with TouchFlo installed.
Is this True?
Please Advice
Regards
Click to expand...
Click to collapse
yes it's true but don' mistake touchFLO with the cube, touchFLO is finger scrolling
It is true but it doesn't have the TuchFlo Cube. If someone know how to install the Cube, please let me know.
shafez said:
Dear all
while reading the Kaiser reviews on the internet found some reviews states that Kaiser comes with TouchFlo installed.
Is this True?
Please Advice
Regards
Click to expand...
Click to collapse
Marcus Tavares said:
It is true but it doesn't have the TuchFlo Cube. If someone know how to install the Cube, please let me know.
Click to expand...
Click to collapse
Till now there is not any .cab for Cube that works flawlessly. We must wait for a while as gullum tries to put it in his next rom. We hope that we will see that soon!
gullum said:
yes it's true but don' mistake touchFLO with the cube, touchFLO is finger scrolling
Click to expand...
Click to collapse
What do you mean by the "Cube" ?, How do u operate the Cube?, Is it like a ButtonFlo ?
Regards
the cube can be seen on youtube or ytpocket just search for "htc touch" and you'll see some reviews showing the cube interface. its part of the today screen. as far as touchflo its similar to what the iphone shows off fluid movements with your finger to control applications example is your looking at a page on the internet with pie, you could scroll down with the wheel use ur stylus to move the bar on the side or use your finger and push the page in the direction you want it to go.
shafez said:
What do you mean by the "Cube" ?, How do u operate the Cube?, Is it like a ButtonFlo ?
Regards
Click to expand...
Click to collapse
Hi Shafez,
Check out this post. Cheerz.
Related
Hey Guys
Is there a VGA version of TOUCHFLO for the Jasjar?
anyone know of this being made?
let me know.
cheers
DJC
dynamo said:
Hey Guys
Is there a VGA version of TOUCHFLO for the Jasjar?
anyone know of this being made?
let me know.
cheers
DJC
Click to expand...
Click to collapse
Hi there,
Its been tried but up to now im not aware of any working touch flo on universal. The VGA and screen rotation causes problems.
TTFN
Jay
see http://forum.xda-developers.com/forumdisplay.php?f=260
you have touchflo work on my universal
sudf said:
see http://forum.xda-developers.com/forumdisplay.php?f=260
you have touchflo work on my universal
Click to expand...
Click to collapse
Can you direct me to a specific forum please, I have tried all 3 on there, and none seem to work.. is there some trick? or am I missing something?
Take a look at this thread:
http://forum.xda-developers.com/showthread.php?t=342039
Tested and working on Universal.
i have the touchflo installed,
I font think I was clear, im looking fo the cube app, afaik it only works in qvga devices thougj, but im being optimistic
Instead od TouchFLO use FTouchFLO - much much better software and works great with UNI. As for the Cube try Touch Commander - great software and works great with FTouchFLO.
Hi, I have just bought a HTC Touch Diamond, and I'm very very pleased with it. I'm however in desperate need for the possibility to customize the TouchFlo 3D start page with information from other programs like weather, birthdays, program start etc. This is possible if I switch off the TouchFlo and use the standard windows mobile start page, but I would hate to do that since I really like the TouchFlo functionality.
Is there a way to customize the TouchFlo 3D start page?
Search is your friend. Howgh
Wrong place..
Short answer is: NO. You may either switch it off and use another program like SPB, or live with it.
There are only small tweaks available from dev guys,and l am afraid it is not what you want.
btw, you are posting in wrong forum, this sub-board is for Diamond accessories only ..
his 1st post....
and he got it all so wrong...bless the n00b
go to this link
http://forum.xda-developers.com/showthread.php?t=409901
themes for tf3d
liamhere said:
and he got it all so wrong...bless the n00b
Click to expand...
Click to collapse
oh so rofl....
TouchFlo 3D improvements
Check out this link -Second Today
http://forum.xda-developers.com/showthread.php?t=401907&highlight=Today
Works great for me on Touch diamond 2 week old.
Good Luck
I am looking for the latest finger touch scrolling .cab for my tilt i just got. I am not sure of what the name is for this application, if i did i would you the search. Please help me out!
Thanks!
Perhaps FTouchSL?
dmarakowski said:
I am looking for the latest finger touch scrolling .cab for my tilt i just got. I am not sure of what the name is for this application, if i did i would you the search. Please help me out!
Thanks!
Click to expand...
Click to collapse
Touchflo 2D/Manilla 2D, SPB Mobile Shell 2.1 just to name two of them. There are many to choose from. But that's a start for you.
Syd159 said:
Perhaps FTouchSL?
Click to expand...
Click to collapse
I'm still enjoying this one
mbarvian said:
I'm still enjoying this one
Click to expand...
Click to collapse
Which version are you on?
hi, do you guys know which manila touchflo 3d rom is most stable and everything works on it?
zdane said:
hi, do you guys know which manila touchflo 3d rom is most stable and everything works on it?
Click to expand...
Click to collapse
Actualy, I just flashed -G- ROM version 9 and Installed TF3D via cab, and it is faster than all the ROMs with TF3D cooked in! I have tried all the others and was a little warry of using TF3D in cab form< but I gotta say! It is so fast on this ROM! Click on this link and use the cab here in the classaction TF3D QVGA link!
http://forum.xda-developers.com/showthread.php?p=2928719
Have Fun< Merry Christmas!
zdane said:
hi, do you guys know which manila touchflo 3d rom is most stable and everything works on it?
Click to expand...
Click to collapse
You will be better to do some search before asking like this,.
I saw three ROM's have TF3D built in
dashmaster1000 said:
Actualy, I just flashed -G- ROM version 9 and Installed TF3D via cab, and it is faster than all the ROMs with TF3D cooked in! I have tried all the others and was a little warry of using TF3D in cab form< but I gotta say! It is so fast on this ROM! Click on this link and use the cab here in the classaction TF3D QVGA link!
http://forum.xda-developers.com/showthread.php?p=2928719
Have Fun< Merry Christmas!
Click to expand...
Click to collapse
Happy Christmas dashmaster. Tell me, did you add Utopykzebulon's standyby fix cab or do find that is not necessary?
robjhellis said:
Happy Christmas dashmaster. Tell me, did you add Utopykzebulon's standyby fix cab or do find that is not necessary?
Click to expand...
Click to collapse
Happy Christmas to you my friend! No I did not, I actualy use a mortscript that I assign to my ptt button! It shuts down manila and secondtoday(landscape fix) puts the phone into sleep mode, and then starts them both up again, when you press it again! You have to use the power button to bring the phone out of sleep and then pust the ptt button to start them again, but hey,it is stable and doesnt have any weird sideffects!
Here is the script and the Landscape zip is posted in the L26 TF3D ROM thread!
zdane said:
hi, do you guys know which manila touchflo 3d rom is most stable and everything works on it?
Click to expand...
Click to collapse
read and dont post ANY more new threads
is there a cab of touchflo 3d thats faster instead of a rom..................
and i'll stop posting when you say please biatch
-G- said:
You will be better to do some search before asking like this,.
I saw three ROM's have TF3D built in
Click to expand...
Click to collapse
msd24200 said:
read and dont post ANY more new threads
Click to expand...
Click to collapse
Well Cheery day it is .....OP asked a good question and there have been some good responses so far..... Me for one was not aware that there was a Cab for TF3D and that it maybe it is faster then the ones with it built in....,.
Now since I have this info , i might try out a few other roms and add TF3D to it....
Thank you dashmaster1000 I am going to check this out....
zdane said:
is there a cab of touchflo 3d thats faster instead of a rom..................
and i'll stop posting when you say please biatch
Click to expand...
Click to collapse
Zdane, just ignore them and remember them when you see their donate button
F2504x4 said:
Zdane, just ignore them and remember them when you see their donate button
Click to expand...
Click to collapse
and the fact was just very easy, if you need the cab, dev and hack forum provide it, you need the ROM with manila3D, just read what ROM have been released in this Kaiser ROM development forum.
related to your word "them" if you have any problem or dont like with "them" you always have a pm,
for the "donate button" words, i think i am the only one have that button until this post, so if you have a problem with me as the "donate button" owner, say it on pm, or mail me at [email protected], got it?
Threads not going anywhere and enough with the flaming.
Thread locked.
Heyy Guys,
I downloaded:
Iolite M2D files,
And installed Touchlfow, Alothugh when i tryed a touchflo theme (Gracing)
Its came up realli small in the top right hand side....
Any ideas?
Simon_WM said:
Heyy Guys,
I downloaded:
Iolite M2D files,
And installed Touchlfow, Alothugh when i tryed a touchflo theme (Gracing)
Its came up realli small in the top right hand side....
Any ideas?
Click to expand...
Click to collapse
Coz Iolite is a QVGA device...
Owww, Is the a file for uni?
Probably you need new skin and edit xml file to match VGA size.
mesaj said:
Probably you need new skin and edit xml file to match VGA size.
Click to expand...
Click to collapse
Could i use one of the OLD Touchflo themes? instead of the new 1s
might try : http://www.freewarepocketpc.net/ppc-download-touchflo-2d-manilla.html
Simon_WM said:
Could i use one of the OLD Touchflo themes? instead of the new 1s
might try : http://www.freewarepocketpc.net/ppc-download-touchflo-2d-manilla.html
Click to expand...
Click to collapse
look at the supported devices it's all QVGA.... i also had a look at this before just to find it's QVGA....
here is a VGA port of touchflow 2d.... try and let us know of you findings...
http://forum.xda-developers.com/showthread.php?t=429224
Yes, please let us know your results!
orb3000 said:
Yes, please let us know your results!
Click to expand...
Click to collapse
Looks like am doing another test for the Uni =]
And this is just the beginning
That´s the idea here!
You have something that want to do and nobody made it before?
Go ahead and share with us
That´s the idea on this community
So get used to
orb3000 said:
And this is just the beginning
That´s the idea here!
You have something that want to do and nobody made it before?
Go ahead and share with us
That´s the idea on this community
So get used to
Click to expand...
Click to collapse
Well, I might just have to XD
Anyway to the results.
Using;
IOLITE M2D (touchflo)
Manila 2D Customizer
HTC Home v.2.1
Base ROM: Tomals V12 Wm 6.5
I uninstalled every program that was installed and then installed the following Programs, Applyed a theme (Gracing)
But to my disapointment it only came up very small, (in the top left hand coner)
But as of ever, i then went to the XDA - Dev Uni section and found a way to fix the problem, Althoguh with GCSEs mocking started (now finished) i have to drop the testing for revision.
But i wish to say: Touchflo runs alrightly, Will try the Touchflo Fix and Reportback =]