Hey Guys
Is there a VGA version of TOUCHFLO for the Jasjar?
anyone know of this being made?
let me know.
cheers
DJC
dynamo said:
Hey Guys
Is there a VGA version of TOUCHFLO for the Jasjar?
anyone know of this being made?
let me know.
cheers
DJC
Click to expand...
Click to collapse
Hi there,
Its been tried but up to now im not aware of any working touch flo on universal. The VGA and screen rotation causes problems.
TTFN
Jay
see http://forum.xda-developers.com/forumdisplay.php?f=260
you have touchflo work on my universal
sudf said:
see http://forum.xda-developers.com/forumdisplay.php?f=260
you have touchflo work on my universal
Click to expand...
Click to collapse
Can you direct me to a specific forum please, I have tried all 3 on there, and none seem to work.. is there some trick? or am I missing something?
Take a look at this thread:
http://forum.xda-developers.com/showthread.php?t=342039
Tested and working on Universal.
i have the touchflo installed,
I font think I was clear, im looking fo the cube app, afaik it only works in qvga devices thougj, but im being optimistic
Instead od TouchFLO use FTouchFLO - much much better software and works great with UNI. As for the Cube try Touch Commander - great software and works great with FTouchFLO.
Related
Dear all
while reading the Kaiser reviews on the internet found some reviews states that Kaiser comes with TouchFlo installed.
Is this True?
Please Advice
Regards
shafez said:
Dear all
while reading the Kaiser reviews on the internet found some reviews states that Kaiser comes with TouchFlo installed.
Is this True?
Please Advice
Regards
Click to expand...
Click to collapse
yes it's true but don' mistake touchFLO with the cube, touchFLO is finger scrolling
It is true but it doesn't have the TuchFlo Cube. If someone know how to install the Cube, please let me know.
shafez said:
Dear all
while reading the Kaiser reviews on the internet found some reviews states that Kaiser comes with TouchFlo installed.
Is this True?
Please Advice
Regards
Click to expand...
Click to collapse
Marcus Tavares said:
It is true but it doesn't have the TuchFlo Cube. If someone know how to install the Cube, please let me know.
Click to expand...
Click to collapse
Till now there is not any .cab for Cube that works flawlessly. We must wait for a while as gullum tries to put it in his next rom. We hope that we will see that soon!
gullum said:
yes it's true but don' mistake touchFLO with the cube, touchFLO is finger scrolling
Click to expand...
Click to collapse
What do you mean by the "Cube" ?, How do u operate the Cube?, Is it like a ButtonFlo ?
Regards
the cube can be seen on youtube or ytpocket just search for "htc touch" and you'll see some reviews showing the cube interface. its part of the today screen. as far as touchflo its similar to what the iphone shows off fluid movements with your finger to control applications example is your looking at a page on the internet with pie, you could scroll down with the wheel use ur stylus to move the bar on the side or use your finger and push the page in the direction you want it to go.
shafez said:
What do you mean by the "Cube" ?, How do u operate the Cube?, Is it like a ButtonFlo ?
Regards
Click to expand...
Click to collapse
Hi Shafez,
Check out this post. Cheerz.
Hello,
i don´t like the TF3D2 - is there any solution from the HTC Home for the TD2. I tried any from the forum of HD2, but all crashes the TD2!
Thx
MyPass
Anyone has a VGA version of HTC Home?
Please post it.
have you tried this one, i use it on my diamond
http://forum.xda-developers.com/showthread.php?t=435751
Thx, this cab works on my TD2!
Rgds
MyPass
I'd like to see some screenshots, i am waiting for the HTC Touch Pro II and hope HTC home works on this as well, i like it much better than the touch flo
Yes, it works in my HTC Touch Diamond2 T5353
At first it did not installed. So I did a hard reset and tried again. Then it worked.
What it means is that it is setting sensitive. What it allergic to, I don't know.
Thank you very much pointing to the right link for home2.cab by Studio Kuma.
Hi all! I want to talk to you about the wallpaper on all tabs! Because when i used the .cab of HD, he works but i have bug when i want to watch contact and other...
It's possible to use only on manila and not in contact screen or other new component on Topaz than Diamond?
Thank you (scuse me for my english i'm french!)
GlamSlam said:
Hi all! I want to talk to you about the wallpaper on all tabs! Because when i used the .cab of HD, he works but i have bug when i want to watch contact and other...
It's possible to use only on manila and not in contact screen or other new component on Topaz than Diamond?
Thank you (scuse me for my english i'm french!)
Click to expand...
Click to collapse
Have you tryed this one? http://forum.xda-developers.com/attachment.php?attachmentid=149451&d=1232709789
aie!!! My TF3D is bug all tab like diamond but with none tabs! other cab?
Thank you for your reply!
OMG... This is just asked SOOOO many times.. over and over again... use the search button
But... this HDWallpaper program doesn't work in Manila 2.6
I have use search button but i don't found the answer of my question! I have the official firmware of HTC and this "cab" doesn't work! TF3D2.037889.1
I can't find it too
I now use the background4alltabs from the blackstone but the start button does'nt work anymore so I can't use it?
I would like to know what to do.
Thnx
WilcoD said:
I can't find it too
I now use the background4alltabs from the blackstone but the start button does'nt work anymore so I can't use it?
I would like to know what to do.
Thnx
Click to expand...
Click to collapse
The same for me, i use "mUn BackGround4AllPages v.02.cab", but the start button does'nt work anymore and i could not navigate thru touchflo tabs, they are not visible, only backup helps.
create cabs with this: http://forum.xda-developers.com/showthread.php?t=503511
use "no cfc compression"
bnm7bnm said:
create cabs with this: http://forum.xda-developers.com/showthread.php?t=503511
use "no cfc compression"
Click to expand...
Click to collapse
Yesss!!!! thanks works great.
Hi all, I searched the author website but only managed to find QVGA version. Any bro here managed to skin one for LEO?
Thanks!
Leechoonhwee said:
Hi all, I searched the author website but only managed to find QVGA version. Any bro here managed to skin one for LEO?
Thanks!
Click to expand...
Click to collapse
I think there is no wvga version. But why you dont try xda shutdown. See the program here http://forum.xda-developers.com/showthread.php?t=544016, there also skins for it
psShutXP works in all resolutions, you just need a vga theme.
psShutXP W/VGA
Heyy Guys,
I downloaded:
Iolite M2D files,
And installed Touchlfow, Alothugh when i tryed a touchflo theme (Gracing)
Its came up realli small in the top right hand side....
Any ideas?
Simon_WM said:
Heyy Guys,
I downloaded:
Iolite M2D files,
And installed Touchlfow, Alothugh when i tryed a touchflo theme (Gracing)
Its came up realli small in the top right hand side....
Any ideas?
Click to expand...
Click to collapse
Coz Iolite is a QVGA device...
Owww, Is the a file for uni?
Probably you need new skin and edit xml file to match VGA size.
mesaj said:
Probably you need new skin and edit xml file to match VGA size.
Click to expand...
Click to collapse
Could i use one of the OLD Touchflo themes? instead of the new 1s
might try : http://www.freewarepocketpc.net/ppc-download-touchflo-2d-manilla.html
Simon_WM said:
Could i use one of the OLD Touchflo themes? instead of the new 1s
might try : http://www.freewarepocketpc.net/ppc-download-touchflo-2d-manilla.html
Click to expand...
Click to collapse
look at the supported devices it's all QVGA.... i also had a look at this before just to find it's QVGA....
here is a VGA port of touchflow 2d.... try and let us know of you findings...
http://forum.xda-developers.com/showthread.php?t=429224
Yes, please let us know your results!
orb3000 said:
Yes, please let us know your results!
Click to expand...
Click to collapse
Looks like am doing another test for the Uni =]
And this is just the beginning
That´s the idea here!
You have something that want to do and nobody made it before?
Go ahead and share with us
That´s the idea on this community
So get used to
orb3000 said:
And this is just the beginning
That´s the idea here!
You have something that want to do and nobody made it before?
Go ahead and share with us
That´s the idea on this community
So get used to
Click to expand...
Click to collapse
Well, I might just have to XD
Anyway to the results.
Using;
IOLITE M2D (touchflo)
Manila 2D Customizer
HTC Home v.2.1
Base ROM: Tomals V12 Wm 6.5
I uninstalled every program that was installed and then installed the following Programs, Applyed a theme (Gracing)
But to my disapointment it only came up very small, (in the top left hand coner)
But as of ever, i then went to the XDA - Dev Uni section and found a way to fix the problem, Althoguh with GCSEs mocking started (now finished) i have to drop the testing for revision.
But i wish to say: Touchflo runs alrightly, Will try the Touchflo Fix and Reportback =]