Well I have the MMS client in my build....
And if I load the T-Mobile GPRS/MMS setting CAB, it works.
However, I can't manage to MANUALLY configure it.
Every time I try to do a "send/receive" after setting it up I get an instant error, which implies that whatever the client is looking for in the connections, its not finding it.
Anyone manage to get this to work with manual configuration? I don't want to use the T-Mo CAB because it "hides" the connection profiles, which sucks bananas, and it also breaks connections when plugged into ActiveSync.
Related
I've tried setting up the Treo with the same GPRS settings I've used on the Wizard but it still doesn't work. Has anyone else run into this problem? Please share your settings.
sure
you just have to enter either wap.voicestream.com or internet2.voicestream.com in the Access point settings. I run a 750 with T-mobile for a while now with no problems.
I'm having the same problem with the Fido network. The settings that always work in WM5 devices won't work on this this unit. Can anyone shed some light on this? Are there some settings in the registry that need to be edited?
Nope. No reg settings needed. Just configure with the standard T-Mobile settings and go.
I've got it to work, somehow. I left the settings as they are and did a soft reset a couple of time and it worked. I actually gave up but it worked in the end without me realizing.
Another thing I've learned by messing with the settings, I can actually sign into Pocket MSN by taking out the proxy settings! This makes me very happy. I've also tried the same thing on my previous phone, the T-mobile MDA (Wizard) and the ended up with the same result!
I've just got a Treo 750 and I am on T-Mobile but I do not know what settings to enter to get onto the internet. Any ideas? Thanks.
if you have t-mobile, the setting should be loaded automaticly (it did to with my Treo at the german T-mobile). Or you use the manual on https://shop.dangaard.de/files/Qtek/Qtek.htm
There you can also download a setting cab which you can install - this will automaticly install the settings.
I am a long time reader newer poster. I am coming from a Treo 750. Is there anything I should do to this before I start adding my apps and transfering contacts? Is there a better backup of my Treo other than the Windows Vista Sync? I am mainly concerned with contacts and software. Also I am on Att I heard about the only thing I need to do is swap Sim card out, also should I adjust the wap settings for this to work. [email protected] password CINGULAR1. Also does it matter when syning new device the device name be the same? What is the best ROM I should have?
ATT
I also use att and all i have to do is set up the network to use media net and tell it under advanced to not use the proxy. It should work fine for you then. I am using Bepe rom 6.3 premium. The connection wizzard sets up right for ATT in the us except fothe proxy. you do npot have to enterthe wap settings they are there already.
Coming from my 750, I didn't have to do a thing - just stick in sim card and I was good to go. I am on the PDAConnect plan so no issues with proxies and such.
As for backup, use Sprite. It comes with the Cruise on the CD.
Thanks I will do that. I should have it in my hands tomorrow morning.
mpf54 said:
I also use att and all i have to do is set up the network to use media net and tell it under advanced to not use the proxy. It should work fine for you then. I am using Bepe rom 6.3 premium. The connection wizzard sets up right for ATT in the us except fothe proxy. you do npot have to enterthe wap settings they are there already.
Click to expand...
Click to collapse
I got my phone installed bepe rom premium, I thought I got all of the att settings correct I am able to receive sms and email but for some reason It only has edge when before the rom i was getting hsdpa and 3g speeds. can you please take me through a small tutorial of what excat settings I need in the connections panel. I have only 1 listed MEdiaNet I then went to the advanced network and it says: turn on HSDPA it is checked, GPRS PAP authentication is checked, CSD Line Type data rate 9600 bps(v.32) connection element Transparent, SMS Service SMS over GSM. What else do I need to do? Please help
Also under comm manager it shows no data connection available?????
I figured it out. I removed all settings and went through the connection wizard. Also I forgot to change the band type to auto, that is why I would only get edge speeds. I wasnt sure about the proxy settings, I was supposed to checkit not uncheck it. and found the server settings and port numbers. Thak for everything. This phone is so much better than the treo 750. Well worth the money. No more square screen for me.
Out of curiosity what do we need to set the proxy to? Is this for using tethering or something else? I am on ATT as well and the auto network configure app thing seems to have set it all up correctly. Is there anything additional to be done?
I have my brand spankin' new TC on Rogers here in canada. Ran the auto connection wizard, great! I have Internet! But I get the cannot connect error every time i send or receive email using outlook. I have tried everything I know, is there something you can suggest? It works fine over WIFI, and ActiveSync via USB. But over the 3G there is nothing!
OK, I figured it out.
For future reference.
When your setting up the email account, do it manually as opposed to allowing the auto set up to happen. And at the outgoing mail server screen select advanced options and make sure it connects to your carrier (In my case "Rogers Internet") internet connection.
Hullo
If you've seen me post already it was to do with me setting up TNT5.0 on my Wizard, which I've done.
What I'm now having issues with is setting up an internet connection.
I can connect the phone to my wifi, which is all well and good but if I'm at home, I can check my email on my PC.
I've never de-branded my phone before, and there was always already preset O2 internet connections on it. So how can I set up these previously default connections on my PDA so I can download my outlook email connections via the internal modemy thing? (ie: anyone know the O2 settings, I think there are two on the phone, O2PayMonthly - my tarrif, and O2MobileWeb.)
Any clue?
Thanks
I've been through various pages, and nothing seems to have worked:
http://www.o2.co.uk/assets/O2HybridNav/Static-files/PDFs/Pocket PC manual set up instructions.pdf
http://www.itrack123.com/content/blogcategory/10/71/
http://www.filesaveas.com/gprs.html
I only seem to be able to make modem connections rather than GPRS (or is that the same) either way I can't get the web or email to download. These work connecting to my wifi.
Downloaded an o2 contract cab settings from http://forum.xda-developers.com/showthread.php?t=263609 but the file didn't seem to do anything specific to my phone
I had to hard reset my Fuze and got rid of the bloatware. There are some cabs that I restored but what does the proxy and hiddenproxy cabs do in windows folder?
When in weather tab, sometimes it says that I dont have data connection. Im hoping that I need to install one of these...
The 'hidden proxy' is a proxy that your phone uses to get onto the web. So if it is enabled your phone is routed over AT&T's network. You cannot use medianet without it. However, it slows down other apps and causes major problems with some apps like Internet Explorer and the weather app. I disable the proxy at all times since I don't use any of the AT&T medianet type apps. You should try to disable it...you can always re-enable it.
bugsykoosh said:
The 'hidden proxy' is a proxy that your phone uses to get onto the web. So if it is enabled your phone is routed over AT&T's network. You cannot use medianet without it. However, it slows down other apps and causes major problems with some apps like Internet Explorer and the weather app. I disable the proxy at all times since I don't use any of the AT&T medianet type apps. You should try to disable it...you can always re-enable it.
Click to expand...
Click to collapse
Thank you. So if I hard reset my Fuze without the bloatware, do I have the hidden proxy enabled?
Also how do i disable it? What cabs should i activate in the windows folder?
Don't know what it will default to but the cab itself should be located in your Windows Directory and is called removehiddenproxy and another is called restoreproxy.
Thanks, bugsykoosh