Related
If anyone is interested in getting Blackberry Connect working on their Hermes / Tytn / etc, take a look at:
http://www.sems.org/entry.asp?ENTRY_ID=162
It works nicely... I tested it with both BES and BIS.
would love to try this out, but the second link doesnt work.
They must have changed the link. I'll dig up the page I found it from.
It looks like they are temporarily putting the files to the link I put up. I updated the post, go to:
http://support.vodafone.de/index_l3_2z.html and download it under VPA Compact II, Desktop Manager 2.1 für VPA compact II (13,7 MB), it is the same thing.
Thanks for the link. One more thing, will this only work on vodafone, or can I use it on TMO in the U.S.?
I tried to use it for Cingular but it says Blocked - Radio in use. Any suggestions?
I tried to use it on T-mo usa. It registered fine and t-mo saw the new pin, but T-Mo won't let me change my handheld. I've been running into this trouble recently with T-Mo. I'm guessing they are blocking all non-blackberry devices or not authorized by T-mo USA to register on their network.
Ok got it setup but I get a conflict from my phone trying to connect to wap.cingular and when signed on I dont get my e-mails throuhg balckberry.net.
Is there any way that both can coexist on this phone happily?
Can anyone confirm the Vodafone Blackberry solution works for Tytn ? Tmobile USA with BES server? That's the only condition that I will go with Tytn. Thanks.
Can anyone confirm the Vodafone Blackberry solution works for Tytn ? Tmobile USA with BES server? That's the only condition that I will go with Tytn. Thanks.
BBC and Cingular Conflict
decepticon said:
Ok got it setup but I get a conflict from my phone trying to connect to wap.cingular and when signed on I dont get my e-mails throuhg balckberry.net.
Is there any way that both can coexist on this phone happily?
Click to expand...
Click to collapse
Did you figure out how to run BBC with the TyTn? I am new to the TyTn and I have the "Blocked - Radio in Use" problem. My UTMS symbol does show something is continuously connecting to network, but so far I cannot find the program.
Thanks in advance
Kevin
kwsmith6 said:
Did you figure out how to run BBC with the TyTn? I am new to the TyTn and I have the "Blocked - Radio in Use" problem. My UTMS symbol does show something is continuously connecting to network, but so far I cannot find the program.
Thanks in advance
Kevin
Click to expand...
Click to collapse
Change the Band to GSM only. BB Connect does not work over UMTS (..yet).
I have BB connect working fine via UMTS and GPRS - I dont have a strong enough signal at my house to get UMTS / 3G, but when I get closer to town the TyTn automatically switches to UMTS / 3G and BB still works fine.
I am using a HTC Rom with a Vodafone blackberry enabled account and synced to the BlackBerry Exchange server
If it says Radio in use that mean that you probably have another program that's actively using the gprs connection (i.e. Direct Push)
I'm also using the tytn with a Tmobile US sim.
I dont know what you guys are talking about when you say you get a "New Pin detected" Message.
When I go to BB Webclient through tmobile.com, it shows my old pin number in there. And I cant change it.
Do you actually have to setup a webclient account, or it's supposed to work as long as you are provisioned for blackberry.net?
Blackberry Coonect Spv 3100
Hi there I have a SPV 3100 with a WM6 cooked Rome. Has anyone managed to get Blackerry connect to work with orange uk
Manythanks
steven
Blackberry Connect
Hi there,
has anyone managed to activate the blackberry connect on the orange spv m3100.
i have contacted orange they say they dont support it but they have activated the blackberry apn on the account.
i know some people have managed to do it any help appreciated.
someone said that due to rim checking imei and network if network does not support they stop the connection. does any one know
i want to use it with BIS
many thanks
steven
BlackBerry Connect 4 for Hermes/TyTN: .CAB file anyone?
Hey - anyone have a .cab file of BBConnect 4 for Hermes/TyTN? I am on a corporate PC that does not run Windows installers (paranoid IT guys).
siros said:
Hey - anyone have a .cab file of BBConnect 4 for Hermes/TyTN? I am on a corporate PC that does not run Windows installers (paranoid IT guys).
Click to expand...
Click to collapse
http://www.sems.org/entry.asp?ENTRY_ID=248
BBConnect + ActiveSync Direct Push coexistence
Hi -
I've got BBConnect v4.x on a Tilt/Tytn II, partly coexisting with ActiveSync Direct Push. This is using a T-Mobile SIM, subscribed to the BlackBerry Enterprise plan (unlimited data, plus access to BES gateway).
I say "partly coexisting" because typically either ActiveSync is getting direct push of new items or BBConnect is actually connected to the company BES. When ActiveSync is "winning", BBconnect typically shows "blocked" (and may say "radio in use"). When BBconnect is "winning", the phone will report that it can't "dial" its data connection.
But sometimes both are working simultaneously...
What is the magic incantation so that they will start up in the right order and both work at the same time?
Many thanks,
Jay
Hey all. I just wanted to give you a heads up. I started a thread on Hofo a day ago. There are actually two about this topic now.
Appearently Cingular had the wireless.cingular.com proxy set on IE. It's in the registry, not in the connection profile. The default connection profile is still wap.cingular without the proxy, but IE will use the proxy.
I assume they did this so that IE could access http://device.home/ the Media Net site, which you need the proxy to access. They did something else to make IE really work right with Media Net, so that's good, but you can't disable the proxy.
This has a few ramifications:
1) IE is slower due to the proxy.
2) The proxy may compress images.
3) You can't access the internet from IE using a Wifi card or if you change your access point to isp.cingular
I started deleting IE connection settings in the registry and managed to disable it. I screwed up the WAP settings in the process. So I have to isolate the registry setting(s) that are specific to this proxy.
It's something we should all do (disable the proxy.) You can still acess it by changing to the MediaNet connection profile should you want to later, but trust me you don't want the proxy set all of the time in IE.
Unfortunatley IE's settings don't have access to edit the proxy setting in IE, it's in the registry only. At least so far I haven't found a setting.
I'll keep you posted. My Treo 750 is appearently defective and I'm working on getting it swapped, so I'm going to be tied up with solving this for at least a day.
Here are two of the threads:
http://www.howardforums.com/showthread.php?p=8553147
http://www.howardforums.com/showthread.php?t=1085384
RF9, just like I posted on HowardForums, please keep us all posted.
Thanks!
I isolated it. To disable the cingular proxy setting in IE:
[HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Internet Settings]
The default setting (that uses the proxy) is:
"EnableAutoDetect"=dword:00000000
Change it to:
"EnableAutoDetect"=dword:00000001
Or simply delete it. It's more of the fact that if it's there and =0 it's used. if it's missing it's not used. But changing it to =1 will also make it disable. This way you can simply change the value back without re-adding the seting back in.
Full details are in my post here:
http://www.howardforums.com/showthread.php?p=8555248#post8555248
I will attempt to .cab an .xml file that will allow you to import the change without a registry editor.
Is this key there right after a hard reset or does it only appear *after* the SIM is installed and the device is turned on?
gamescan said:
Is this key there right after a hard reset or does it only appear *after* the SIM is installed and the device is turned on?
Click to expand...
Click to collapse
I'm really not sure at this point.
I finally got this registry edit (or "Hack" if you prefer) in to a .cab file that you can download and install without ever installing a registry editor.
It's perfectly safe to use. There are two cab files.
1) To disable the existing proxy server setting
2) To restore the proxy server setting back to the default state.
All it does is change the existing registry value from 0 to 1.
Get it here:
http://www.gadgetech.info/treo/hacks/disableproxy/index.shtml#Download:
Download the two .CAB files to your Treo 750. Just click on it to install it like you would any other .CAB file.
To verify that it's installed. Try to browse to http://device.home/ . If you can get to it the proxy is enabled. If yoiu can't, it's (most likely) disabled.
If you use isp.cingular or a wifi card, of course it will only work if it's disabled.
gamescan said:
Is this key there right after a hard reset or does it only appear *after* the SIM is installed and the device is turned on?
Click to expand...
Click to collapse
I just verified. These settings are NOT there before the SIM is inserted. Only after the SIM is registered (SIM inserted, and phone turned on) do those settings become enabled.
Good catch. So it's not hard-coded. It's a carrier preference. I would assume that if I put a non-cingular SIM in the phone this setting would disappear. Palm does specified configuration based on the SIM inserted on thier Palm OS line, I assume they've done this on WM5.
I've been through the MSDN documentation and there's a whole big section devoted to carrier provisioning which is what this is.
other way round
Hey,
I'd like to know if there is a solution to give the PIE a special proxy setting via the registry.
Due to some restrictions i am forced not to make general proxy settings in the connection manager, but i want the PIE to route via an proxy. Since PIE doesn't provide a proxy setting within the program i'm wondering, if there is the possibility to do so in the registry....
anyone know how to copy ROM files?? I found a DLL and registry entries for "PorkPie.dll" in the \Windows folder that I think is responsible for the cingular proxy hard coding and other customizations.
RF9, I noticed your Fido logo in your profile... Have you managed to get IE to work with a Fido SIM using this method?
Pls help : Unlocked Treo750 - Not able to view websites
Hi - I bought unlocked Cingular treo750 from US and now using in India. Have setup my ISP and using the Internet. I can now download my emails, use Pocket MSN but unfortunately not able to see any website on IE. It keeps says "Locating" to any kind of website I want to view.
The problem is only on viewing websites. IMAP email and Pocket MSN works perfect therefore I presume the connection is perfect.
Could you please help me on this.
After some time - The message appears "Page can not be downloaded as the connection was lost..."
Thanks very much.
Manish Vij
Treo 750 Proxy Disable
Hi RF9
I have been following your thread on getting a treo 750w from Cingular to work on the Fido network. I have tried to change the registry settings as you have described:
- <wap-provisioningdoc>
- <characteristic type="Registry">
- <characteristic type="HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings">
<parm name="EnableAutoDetect" value="1" datatype="integer" />
</characteristic>
</characteristic>
</wap-provisioningdoc>
I got the download, but I am afraid I am not familiar enough to know how to install the changes on my phones software. Could you please do a more step by step explanation for me (us). Everything works on my Fido phone except when I go to a web page I get: "connecting" "locating" and then "page cannot be displayed".
Many thanks for your help. Ian
beispielwiese said:
Hey,
I'd like to know if there is a solution to give the PIE a special proxy setting via the registry.
Due to some restrictions i am forced not to make general proxy settings in the connection manager, but i want the PIE to route via an proxy. Since PIE doesn't provide a proxy setting within the program i'm wondering, if there is the possibility to do so in the registry....
Click to expand...
Click to collapse
Did you get this to work? I'm Using hamachi mobile now and would like to use a proxy i have setup on my network.
Enquiring Minds
Please forgive my lack of technical savy; I am really struggling to learn all of this stuff...so my questions might seem a bit "stupid"... (it's just my old age showing!
Could this proxy thing be causing my problems in accessing bank of america's website? I was able to do so just fine on my old Treo 680, nad my AT&T Tilt (I hated that phone!), but on my 750 with WM6, I keep receiving a message that says "For security reasons, your device can't access Mobile Banking" I also cannot access other banking sites as well.
If so, will making these changes cause other issues?
Thanks for your patience and information. You folks here are the best!
Tom
tommc4 said:
Could this proxy thing be causing my problems in accessing bank of america's website? I was able to do so just fine on my old Treo 680, nad my AT&T Tilt (I hated that phone!), but on my 750 with WM6, I keep receiving a message that says "For security reasons, your device can't access Mobile Banking" I also cannot access other banking sites as well.
If so, will making these changes cause other issues?
Thanks for your patience and information. You folks here are the best!
Tom
Click to expand...
Click to collapse
Tom, I just tried www.bankofamerica.com and I got into it fine. So this does not seem to be the problem.
About your unit...
Thanks for the reply!
Are you using an AT&T branded 750 with the WM6 upgrade, or a generic or other branded 750? I have the AT&T branded one.
Thanks again for your reply!
tommc4 said:
Thanks for the reply!
Are you using an AT&T branded 750 with the WM6 upgrade, or a generic or other branded 750? I have the AT&T branded one.
Thanks again for your reply!
Click to expand...
Click to collapse
Yes, I have the at&t branded with the official WM6 upgrade also. I do have the at&t CapPackage removed per the instructions on this site but all the MediaNet dB is intact.
Cap Package?
I have not heard about that one? Can you elaborate, or point me in the rigt direction? Thansk!
Tom
RF9, this is very similar to what I'm experiencing, but when I go to "HKCU\Software\Microsoft\Windows\CurrentVersi on\Internet Settings" the EnableAutoDetect value is already set to 1.
I have the AT&T Tilt, which came with WM6.
Here's my problem thread : http://forum.xda-developers.com/showthread.php?t=352064
Thanks.
Hi RF9,
I saw this thread and tried your .cab file on my treo 750 and now my internet explorer is running sweet! ive been having the problem for some weeks now and im truly happy that finally my treo is fully functional using softbank AP here in Japan....
a lot of thanks to you!
Razor1973 said:
RF9, just like I posted on HowardForums, please keep us all posted.
Thanks!
Click to expand...
Click to collapse
Hi to All;
Im sorry if im posting this email on a wrong thread. My apologies am not very familiar with this type of threads. I would like to ask for any assistance on my Mobile fone. I bought a Treo 750 AT&T from a friend who works in the States who brought his mobile fone here in the Philippines. I am now using the Treo 750 here in the philippines using a local network provider. I can send sms using the local network but I can't seem to connect to the internet and can't even send an MMS. Ive have tried hopelessly but there would always b e a promp which says" Connecting to : AT&T , connecting to GPRS,3G.." and it can't connect...I also tried to access yahoo and internet explorer but the same thing, could'nt access as well. I tried to ask assistance from the network's wireless center but they said that they could not help me on this problem either. I am no left with an expensive mobile phone with a lot of features, but couldn't use them. I hope somebody can help me with this type of problem.
Best regards,
Abrille
Hi,
So I finally (hours...) managed to get BBC (version 2.1.2.52) to work on my Treo 750v (over Cingular/at&t's network).
Now for the next challenge...
It appears that when BBC is connected (99% of the time), if I try to browse to a website using PIE, it disconnect from the BlackBerry APN (blackberry.net) and connects back to My ISP (or MediaNet), and won't push emails until I stop browsing.
Is anyone with BBC (on either the 750 or one of the 700s) able to browse and push emails at the same time?
The BlackBerry APN does not show up under connections (it is set inside BBC setup only), so I can't configure it to be my default APN for everything.
Any ideas/recommendations?
Thanks,
Ix.
zaxxon said:
Hi,
It appears that when BBC is connected (99% of the time), if I try to browse to a website using PIE, it disconnect from the BlackBerry APN (blackberry.net) and connects back to My ISP (or MediaNet), and won't push emails until I stop browsing.
Click to expand...
Click to collapse
There is no way to change this. The Treo cannot be connected via two APNs at the same time. The BlackBerry service will always shut down as soon as you open a connection via your operators APN.
hey zaxx where did you get the program for the bb connect?
Sorry, I did not save the download link. But googling "blackberry 2.1.2.52" might get you there, it was on some forum post.
Hello all,
Recent owner, second-time poster!
I am having two connection specific issues that I am hoping to get a clear answer on.
First I cannot make HTC Home 1.5 (Emu's build) connect to the weather server with the T mobile 216.155.165.50:8080 proxy port open. Is there a workaround available for this? Interestingly, it works just fine to update over active sync!
The related question, an active sync one, is that pIE will not connect to the web when I am sync'ed up, even though its apparent that HTC Home Weather can! PIE works fine over GPRS (T-Mobile $6 plan) or WiFi.
I have already trolled around in the registry looking for a weather-related IP or proxy setting. There are obvious settings for location, but not for anything connection related.
I am running Jaguar 4.0b with HTC Home 1.5 and Home customizer Beta5. I purchased and installed the whole SK Toolkit (great program, worth the money). I also have more player and Voice Dialer.
This is my first ever smart phone, and I am trying to learn quickly. Thanks, all!
I'm having a similar problem with HTC Home weather and my t-mobile GPRS connection. I'm running XDA Mobile 6 R5 though. Everything works fine over WiFi but not with GPRS. Internet Explorer works over GPRS but drags its knuckles when connecting, it takes a few minutes once the connection is initiated. I've tried both settings for T-mobile data and neither works real well.
Shane
I have a familiar issue with Orange. All works fine except the weather update using Orange World GPRS.
Where can I change the connection that HTC Home uses to get the weather info???
I just got the T-Zones plan for $5.99/month and put in the proxy settings with the 8080 port for connections, Internet explorer works fine (but slow obviously), but no other program that uses the internet seems to work.. maybe its the settings? maybe the program has to use the proxy as well? any thoughts?
I believe the weather program may be timing out too fast. Dunno weather it's a registry entry or what that changes the settings for it. Or if it's even changable. Everything else works great over GPRS just not HTC Home Weather. Although it works fine over WiFi.
Shane
anyone ever have any luck with the weather downloading over proxy?
i have never been able to have the weather update from the tmobile proxy, I think it has something to do with some blocked port or something of the sort. I have looked for months for a workaround, only solution is to upgrade from the 5.99 plan to the full internet plan and it will work, but that wont happen everything connects fine except htc weather and some other application i had on my wizaed cant remember right now.
if you guys did some homework and did a search of the forums for specifically: htc home proxy, you would find the htc home proxy patch which lets you do exactly what your asking
thanks i found it and it works
http://forum.xda-developers.com/showthread.php?t=371591
How did you fix it? Please let me know.
Thanks
daishi17 said:
thanks i found it and it works
http://forum.xda-developers.com/showthread.php?t=371591
Click to expand...
Click to collapse
the fix is easy. remove that old proxy and change your wap to epc.tmobile.com.
I am a long time reader newer poster. I am coming from a Treo 750. Is there anything I should do to this before I start adding my apps and transfering contacts? Is there a better backup of my Treo other than the Windows Vista Sync? I am mainly concerned with contacts and software. Also I am on Att I heard about the only thing I need to do is swap Sim card out, also should I adjust the wap settings for this to work. [email protected] password CINGULAR1. Also does it matter when syning new device the device name be the same? What is the best ROM I should have?
ATT
I also use att and all i have to do is set up the network to use media net and tell it under advanced to not use the proxy. It should work fine for you then. I am using Bepe rom 6.3 premium. The connection wizzard sets up right for ATT in the us except fothe proxy. you do npot have to enterthe wap settings they are there already.
Coming from my 750, I didn't have to do a thing - just stick in sim card and I was good to go. I am on the PDAConnect plan so no issues with proxies and such.
As for backup, use Sprite. It comes with the Cruise on the CD.
Thanks I will do that. I should have it in my hands tomorrow morning.
mpf54 said:
I also use att and all i have to do is set up the network to use media net and tell it under advanced to not use the proxy. It should work fine for you then. I am using Bepe rom 6.3 premium. The connection wizzard sets up right for ATT in the us except fothe proxy. you do npot have to enterthe wap settings they are there already.
Click to expand...
Click to collapse
I got my phone installed bepe rom premium, I thought I got all of the att settings correct I am able to receive sms and email but for some reason It only has edge when before the rom i was getting hsdpa and 3g speeds. can you please take me through a small tutorial of what excat settings I need in the connections panel. I have only 1 listed MEdiaNet I then went to the advanced network and it says: turn on HSDPA it is checked, GPRS PAP authentication is checked, CSD Line Type data rate 9600 bps(v.32) connection element Transparent, SMS Service SMS over GSM. What else do I need to do? Please help
Also under comm manager it shows no data connection available?????
I figured it out. I removed all settings and went through the connection wizard. Also I forgot to change the band type to auto, that is why I would only get edge speeds. I wasnt sure about the proxy settings, I was supposed to checkit not uncheck it. and found the server settings and port numbers. Thak for everything. This phone is so much better than the treo 750. Well worth the money. No more square screen for me.
Out of curiosity what do we need to set the proxy to? Is this for using tethering or something else? I am on ATT as well and the auto network configure app thing seems to have set it all up correctly. Is there anything additional to be done?