Hey all. I just wanted to give you a heads up. I started a thread on Hofo a day ago. There are actually two about this topic now.
Appearently Cingular had the wireless.cingular.com proxy set on IE. It's in the registry, not in the connection profile. The default connection profile is still wap.cingular without the proxy, but IE will use the proxy.
I assume they did this so that IE could access http://device.home/ the Media Net site, which you need the proxy to access. They did something else to make IE really work right with Media Net, so that's good, but you can't disable the proxy.
This has a few ramifications:
1) IE is slower due to the proxy.
2) The proxy may compress images.
3) You can't access the internet from IE using a Wifi card or if you change your access point to isp.cingular
I started deleting IE connection settings in the registry and managed to disable it. I screwed up the WAP settings in the process. So I have to isolate the registry setting(s) that are specific to this proxy.
It's something we should all do (disable the proxy.) You can still acess it by changing to the MediaNet connection profile should you want to later, but trust me you don't want the proxy set all of the time in IE.
Unfortunatley IE's settings don't have access to edit the proxy setting in IE, it's in the registry only. At least so far I haven't found a setting.
I'll keep you posted. My Treo 750 is appearently defective and I'm working on getting it swapped, so I'm going to be tied up with solving this for at least a day.
Here are two of the threads:
http://www.howardforums.com/showthread.php?p=8553147
http://www.howardforums.com/showthread.php?t=1085384
RF9, just like I posted on HowardForums, please keep us all posted.
Thanks!
I isolated it. To disable the cingular proxy setting in IE:
[HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Internet Settings]
The default setting (that uses the proxy) is:
"EnableAutoDetect"=dword:00000000
Change it to:
"EnableAutoDetect"=dword:00000001
Or simply delete it. It's more of the fact that if it's there and =0 it's used. if it's missing it's not used. But changing it to =1 will also make it disable. This way you can simply change the value back without re-adding the seting back in.
Full details are in my post here:
http://www.howardforums.com/showthread.php?p=8555248#post8555248
I will attempt to .cab an .xml file that will allow you to import the change without a registry editor.
Is this key there right after a hard reset or does it only appear *after* the SIM is installed and the device is turned on?
gamescan said:
Is this key there right after a hard reset or does it only appear *after* the SIM is installed and the device is turned on?
Click to expand...
Click to collapse
I'm really not sure at this point.
I finally got this registry edit (or "Hack" if you prefer) in to a .cab file that you can download and install without ever installing a registry editor.
It's perfectly safe to use. There are two cab files.
1) To disable the existing proxy server setting
2) To restore the proxy server setting back to the default state.
All it does is change the existing registry value from 0 to 1.
Get it here:
http://www.gadgetech.info/treo/hacks/disableproxy/index.shtml#Download:
Download the two .CAB files to your Treo 750. Just click on it to install it like you would any other .CAB file.
To verify that it's installed. Try to browse to http://device.home/ . If you can get to it the proxy is enabled. If yoiu can't, it's (most likely) disabled.
If you use isp.cingular or a wifi card, of course it will only work if it's disabled.
gamescan said:
Is this key there right after a hard reset or does it only appear *after* the SIM is installed and the device is turned on?
Click to expand...
Click to collapse
I just verified. These settings are NOT there before the SIM is inserted. Only after the SIM is registered (SIM inserted, and phone turned on) do those settings become enabled.
Good catch. So it's not hard-coded. It's a carrier preference. I would assume that if I put a non-cingular SIM in the phone this setting would disappear. Palm does specified configuration based on the SIM inserted on thier Palm OS line, I assume they've done this on WM5.
I've been through the MSDN documentation and there's a whole big section devoted to carrier provisioning which is what this is.
other way round
Hey,
I'd like to know if there is a solution to give the PIE a special proxy setting via the registry.
Due to some restrictions i am forced not to make general proxy settings in the connection manager, but i want the PIE to route via an proxy. Since PIE doesn't provide a proxy setting within the program i'm wondering, if there is the possibility to do so in the registry....
anyone know how to copy ROM files?? I found a DLL and registry entries for "PorkPie.dll" in the \Windows folder that I think is responsible for the cingular proxy hard coding and other customizations.
RF9, I noticed your Fido logo in your profile... Have you managed to get IE to work with a Fido SIM using this method?
Pls help : Unlocked Treo750 - Not able to view websites
Hi - I bought unlocked Cingular treo750 from US and now using in India. Have setup my ISP and using the Internet. I can now download my emails, use Pocket MSN but unfortunately not able to see any website on IE. It keeps says "Locating" to any kind of website I want to view.
The problem is only on viewing websites. IMAP email and Pocket MSN works perfect therefore I presume the connection is perfect.
Could you please help me on this.
After some time - The message appears "Page can not be downloaded as the connection was lost..."
Thanks very much.
Manish Vij
Treo 750 Proxy Disable
Hi RF9
I have been following your thread on getting a treo 750w from Cingular to work on the Fido network. I have tried to change the registry settings as you have described:
- <wap-provisioningdoc>
- <characteristic type="Registry">
- <characteristic type="HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings">
<parm name="EnableAutoDetect" value="1" datatype="integer" />
</characteristic>
</characteristic>
</wap-provisioningdoc>
I got the download, but I am afraid I am not familiar enough to know how to install the changes on my phones software. Could you please do a more step by step explanation for me (us). Everything works on my Fido phone except when I go to a web page I get: "connecting" "locating" and then "page cannot be displayed".
Many thanks for your help. Ian
beispielwiese said:
Hey,
I'd like to know if there is a solution to give the PIE a special proxy setting via the registry.
Due to some restrictions i am forced not to make general proxy settings in the connection manager, but i want the PIE to route via an proxy. Since PIE doesn't provide a proxy setting within the program i'm wondering, if there is the possibility to do so in the registry....
Click to expand...
Click to collapse
Did you get this to work? I'm Using hamachi mobile now and would like to use a proxy i have setup on my network.
Enquiring Minds
Please forgive my lack of technical savy; I am really struggling to learn all of this stuff...so my questions might seem a bit "stupid"... (it's just my old age showing!
Could this proxy thing be causing my problems in accessing bank of america's website? I was able to do so just fine on my old Treo 680, nad my AT&T Tilt (I hated that phone!), but on my 750 with WM6, I keep receiving a message that says "For security reasons, your device can't access Mobile Banking" I also cannot access other banking sites as well.
If so, will making these changes cause other issues?
Thanks for your patience and information. You folks here are the best!
Tom
tommc4 said:
Could this proxy thing be causing my problems in accessing bank of america's website? I was able to do so just fine on my old Treo 680, nad my AT&T Tilt (I hated that phone!), but on my 750 with WM6, I keep receiving a message that says "For security reasons, your device can't access Mobile Banking" I also cannot access other banking sites as well.
If so, will making these changes cause other issues?
Thanks for your patience and information. You folks here are the best!
Tom
Click to expand...
Click to collapse
Tom, I just tried www.bankofamerica.com and I got into it fine. So this does not seem to be the problem.
About your unit...
Thanks for the reply!
Are you using an AT&T branded 750 with the WM6 upgrade, or a generic or other branded 750? I have the AT&T branded one.
Thanks again for your reply!
tommc4 said:
Thanks for the reply!
Are you using an AT&T branded 750 with the WM6 upgrade, or a generic or other branded 750? I have the AT&T branded one.
Thanks again for your reply!
Click to expand...
Click to collapse
Yes, I have the at&t branded with the official WM6 upgrade also. I do have the at&t CapPackage removed per the instructions on this site but all the MediaNet dB is intact.
Cap Package?
I have not heard about that one? Can you elaborate, or point me in the rigt direction? Thansk!
Tom
RF9, this is very similar to what I'm experiencing, but when I go to "HKCU\Software\Microsoft\Windows\CurrentVersi on\Internet Settings" the EnableAutoDetect value is already set to 1.
I have the AT&T Tilt, which came with WM6.
Here's my problem thread : http://forum.xda-developers.com/showthread.php?t=352064
Thanks.
Hi RF9,
I saw this thread and tried your .cab file on my treo 750 and now my internet explorer is running sweet! ive been having the problem for some weeks now and im truly happy that finally my treo is fully functional using softbank AP here in Japan....
a lot of thanks to you!
Razor1973 said:
RF9, just like I posted on HowardForums, please keep us all posted.
Thanks!
Click to expand...
Click to collapse
Hi to All;
Im sorry if im posting this email on a wrong thread. My apologies am not very familiar with this type of threads. I would like to ask for any assistance on my Mobile fone. I bought a Treo 750 AT&T from a friend who works in the States who brought his mobile fone here in the Philippines. I am now using the Treo 750 here in the philippines using a local network provider. I can send sms using the local network but I can't seem to connect to the internet and can't even send an MMS. Ive have tried hopelessly but there would always b e a promp which says" Connecting to : AT&T , connecting to GPRS,3G.." and it can't connect...I also tried to access yahoo and internet explorer but the same thing, could'nt access as well. I tried to ask assistance from the network's wireless center but they said that they could not help me on this problem either. I am no left with an expensive mobile phone with a lot of features, but couldn't use them. I hope somebody can help me with this type of problem.
Best regards,
Abrille
Related
Hi guys,
I have the Palm 750v unlocked with my T-mobile sim in. I have setup the Internet connection etc but the new MMS/SMS package sets up different and I cannot set up MMS .
Need someone who knows the password for T-mobile UK MMS
Anyone with any idea , even if you copy down the vodafone settings that would give me a guide of what is different.
Cheers
moved to treo section
Try this works for me
Thanks Chrisboy
Have you managed to get the device to send an MMS?
I havent tried to be honest but i did with my Tytn and it didnt work, i assumed it had to be switched on by Tmobile
Chris
mms I can't get working currently.
A network error (0x150) has occurred.
First things does anyone know where the automatic settings are linked too?
They must link back to a file in the registry or maybe in the windows file.
manual settings I have tried (same settings that work on my tytn still no luck)
The menu settings are different to the ones on my TyTN.
Menu,Options,Advanced
auto / manual
select manual then edit
If anyone gets it working on tmobile please post.
Thanks
speed tests are fantastic currently getting 1.1 megabits per second.
[QUOTE
speed tests are fantastic currently getting 1.1 megabits per second.[/QUOTE]
Is that on your Tytn or the 750V ???
Treo 750v chrissyboy6969. I love the device.
Dude how do you get 1.1mb/s on the device, HSDPA is not enabled the most i can get is 300kb/s
Not enabled a thing just did a speed test on the device and I am getting over 1mb always best so far is 1.1mb tmobile uk sim card. I know the phone doesn'y have wifi but I can live with these speeds over GPRS.
Very strange, i am on tmobile and i had the tytn before this and my speeds were around the same with the tytn but with this i can only get 300kb/s do you have the vodafone standard rom as well and what do you use to test the speed
Thanks
Chris
Guys Paul at Modaco sent me this . Its from the registery I guess the Vodafone part is hard set into the registry.
I have tried this and it doesn't work . If I open it with Notepad the Tmobile settings seem wrong . Is it simply just entering the correct values and you are done?
Treo 750 Clear MMS Settings
Today just got an "unlocked" Treo 750v (Vodafone Version).
The MMS settings are buried in the registry. Cannot get to them via typical set up options.
There is no way I can replace Cingular MMS settings with Tmobile (My carrier).
If I go and make change manually, the changes do not take effect. The next time I reboot/restart phone these settings disappear.
I have found registry import files in different forums, but none seem to make change properly.
Any ideas?
Yea , it seems an issue and it does come from within the reg. I have to date no none fix . Maybe some of the other more techy guys could help on the other forums.
I received my unlocked Treo750v yesterday.
So far I have been successfull in getting everything working except MMS messages.
Currently, I have aquired what I believe to be all the necessary information in order to send T-Mobile USA MMSs:
Message Center Number: +12063130004
Email Center Number: 500
MMS Gateway address: 216.155.165.050
MMS URL: http://216.155.165.050/servlets/mms
Network Profile: Default
Some people have stated they were unable to get these settings to stay after restarting their phone. I am not experiencing that problem. The closest I can get to reproducing that error is that when i turn off the cell capabilities, the Message Center Number disappears. However the correct number reappears when I turn the cell functions back on.
I've taken a brief look at the reg file in T_Mobile_750v.zip
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Palm]
[HKEY_LOCAL_MACHINE\SOFTWARE\Palm\Messaging]
[HKEY_LOCAL_MACHINE\SOFTWARE\Palm\Messaging\Prefs]
"NetworkProfile"="MMS"
"MmsGatewayAddress"="212.183.137.12:8799"
"MmsUrl"="http://mms.vodafone.co.uk/servlets/mms"
"UseManualNetworkSettings"=dword:00000000
"AutoDownloadMmsEvenIfRoaming"=dword:00000000
"AddMediaDontShow"=dword:00000001
"EmailCenterNumber"=""
[HKEY_LOCAL_MACHINE\SOFTWARE\Palm\Varnish]
[HKEY_LOCAL_MACHINE\SOFTWARE\Palm\Varnish\Messaging]
[HKEY_LOCAL_MACHINE\SOFTWARE\Palm\Varnish\Messaging\General]
"IsGSM"=dword:00000001
"ShowAdvancedPreferencesTab"=dword:00000001
"ShowSmsToMmsConvertWarning"=dword:00000001
"UseVodaphoneVoicemail"=dword:00000001
"ValidityPeriodAvailable"=dword:00000001
[HKEY_LOCAL_MACHINE\SOFTWARE\Palm\Varnish\Messaging\SMS]
"CanSendBlank"=dword:00000001
"MaxCharsPerMsg"=dword:000000A0
"MaxPartsPerMsg"=dword:0000000A
"MaxRecipients"=dword:00000014
"SMSCUseSIM"=dword:00000001
"SMSC"=""
"RequestDeliveryReceiptAvailable"=dword:00000001
"SMSEmailGateway"=""
[HKEY_LOCAL_MACHINE\SOFTWARE\Palm\Varnish\Messaging\MMS]
"MMSC"="http://193.254.145.140:8002/ "
"MMSUA"="MDA Vario/2.0/arcsoft-mmsua-3.2.0.xx"
"MMSUAProf"="http://www.htcmms.com.tw/tmo/mdavario-2.0.xml"
"MMSProxy"="149.254.201.135:8080"
"APN"="T-Mobile Internet"
"CanSendBlank"=dword:00000000
"CcBccSupported"=dword:00000001
"DefaultPageDuration"=dword:00001388
"IsPictResolutionLimited"=dword:00000000
"IsWAVSupported"=dword:00000001
"MaxAudioSize"=dword:0004B000
"MaxMsgSize"=dword:0004B000
"MaxPictHeight"=dword:00000000
"MaxPictWidth"=dword:00000000
"MaxRecipients"=dword:00000014
"MaxVideoSize"=dword:0004B000
"RequestDeliveryReceiptAvailable"=dword:00000001
"RequestReadReceiptAvailable"=dword:00000001
"AcknowledgeMsgRead"=dword:00000000
"AcknowledgeMsgReceipt"=dword:00000000
I'm going to proceed and edit the messaging portion of the reg file, and import it on my cell, however I don't really know how to approach the VARNISH settings.
What exactly are those?
Where did you make the changes to these new settings?
Did you make the network settings as "Manual" and enter these manually, or change the registry with these settings?
Thanks
OK, found a posting on TreoCentral that solves the MMS issue.... take a look
http://discussion.treocentral.com/showthread.php?p=1109428&posted=1#post1109428
Works fine for me!
MMS Sorted Send and receive (UK Tmobile)
Setting, Connections, Connections
add a connection (You may have one if you using GPRS on tmobile)
if not enter a name for the connection i.e Tmobile GPRS
modem Cellular Line GPRS.3G)
Access point general.t-mobile.uk
username - user
password - one2one
Finish
Start, Messaging, Menu, Options, Advanced,
Click Manual then edit
Message center number should already be there
Email Center number (Blank)
MMS Gateway - 149.254.201.135:8080
MMS URL - http://mmsc.t-mobile.co.uk:8002
Network Profile - Tmobile GPRS
I use the same profile as my GPRS Internet but some people just add one under connections called Picture Messaging or something along them lines.
I took a look at the registry file and changed it and got everything working but when you restart the phone settings default to the original ones which cause message to stop send and receiving.
I also took some pictures of some speed tests as I am getting over 1mb speeds.
I am so happy with my Treo 750v it was a good buy everything that I want is now working. more pictures in my next post.
Tried what yo have and still sits there at 10%
Can you put some screen shots up of your network settings
Hello guys
Please help! I've just got my Palm Treo 750v unlocked. The phone works fine on T-mobile but I can't get a GPRS connection. I've tried changing the settings and setting up a new t-mobile GPRS connection but i still can't get it connected.
I seem to have a wap contract connection (I presume this is preinstalled by Vodafone and must be Windows reg related) which always overides when i reboot the Palm.
If you can help I would be really grateful
Marcyb said:
Hello guys
Please help! I've just got my Palm Treo 750v unlocked. The phone works fine on T-mobile but I can't get a GPRS connection. I've tried changing the settings and setting up a new t-mobile GPRS connection but i still can't get it connected.
I seem to have a wap contract connection (I presume this is preinstalled by Vodafone and must be Windows reg related) which always overides when i reboot the Palm.
If you can help I would be really grateful
Click to expand...
Click to collapse
If you are in UK you are welcome to contact me tomorrow and i'll run through how to set it up. I've got an unlocked 750v running T-mobile and i've had no problems with GPRS or 3G.
Thanks Mike, I have sent you a private message. Looking forward to getting it working its driving me crazy.
Marc
Marcyb said:
Thanks Mike, I have sent you a private message. Looking forward to getting it working its driving me crazy.
Marc
Click to expand...
Click to collapse
Hi Marc
just replied by private message
regards
mike
Unlock 750
I have just purchased the 750 and would like to know how you guys unlocked it. Would love to use it with my T-mobile 2GB GPRS
l44wsn said:
I have just purchased the 750 and would like to know how you guys unlocked it. Would love to use it with my T-mobile 2GB GPRS
Click to expand...
Click to collapse
i used these guys -
http://www.imei-check.co.uk/
no problem at all
I've just got an unlocked Treo 750 and I am on T-mobile. My previous phone (Sony Ericsson k750i) worked fine on the web, but I've got no idea what settings to enter to get on the web on this phone! Can you help? PS I was thinking of trying Opera for browsing but I have not installed it yet.
hope this helps someone
good luck
http://www.filesaveas.com/gprs.html
Matt Christie said:
I've just got an unlocked Treo 750 and I am on T-mobile. My previous phone (Sony Ericsson k750i) worked fine on the web, but I've got no idea what settings to enter to get on the web on this phone! Can you help? PS I was thinking of trying Opera for browsing but I have not installed it yet.
Click to expand...
Click to collapse
1) go to start / settings / connections
2) if an existing connection exists click manage existing connections or add a new modem connection
3) if existing connection click edit or tap New
4) enter name - e.g. T-Mobile Inter.
5) select a modem - cellular line (GPRS, 3G)
6) access point name - general.t-mobile.uk
7) user name - t-mobile
8) password - one2one
9) click finish
you should be good to connect now
btw - you can always call t-mobile for support - they are really helpful
I tried this but after entering the name and modem the Treo asks 'Enter the number exactly as it should be dialed.'. What number do I put in here? I then tried using GPRS instead and I just get 'No modem at the above number.'.
Matt Christie said:
I tried this but after entering the name and modem the Treo asks 'Enter the number exactly as it should be dialed.'. What number do I put in here? I then tried using GPRS instead and I just get 'No modem at the above number.'.
Click to expand...
Click to collapse
If it is asking for a number, it sounds like you are setting up a WAP connection and not a GPRS connection.
Matt Christie said:
I tried this but after entering the name and modem the Treo asks 'Enter the number exactly as it should be dialed.'. What number do I put in here? I then tried using GPRS instead and I just get 'No modem at the above number.'.
Click to expand...
Click to collapse
call t-mobile - they'll help you set it up
i have a cab file that sets up all the tmobile settings for web and wap pm me if you want a copy it works a treat
chris
What are the proxy settings for Cingular Palm 750 with T-Mobile UK sim card?
I've unlocked my Cingular Palm Treo 750 and can make voice calls without any problem.
I still can't access the internet.
I've entered the settings and when I launch the browser, it first show 'locating' and then 'opening' in the status bar, but the web page never opens.
I know that with Cingular there were some proxy settings and so I wonder if I need to enter any here.
The proxy fields are:
1. This network connects to the internet
2. This network uses a proxy server to connect to the internet
3. Proxy Server (name)
4. Http:
5. WAP
6. Secure WAP
7. Socks
I've tried setting up the Treo with the same GPRS settings I've used on the Wizard but it still doesn't work. Has anyone else run into this problem? Please share your settings.
sure
you just have to enter either wap.voicestream.com or internet2.voicestream.com in the Access point settings. I run a 750 with T-mobile for a while now with no problems.
I'm having the same problem with the Fido network. The settings that always work in WM5 devices won't work on this this unit. Can anyone shed some light on this? Are there some settings in the registry that need to be edited?
Nope. No reg settings needed. Just configure with the standard T-Mobile settings and go.
I've got it to work, somehow. I left the settings as they are and did a soft reset a couple of time and it worked. I actually gave up but it worked in the end without me realizing.
Another thing I've learned by messing with the settings, I can actually sign into Pocket MSN by taking out the proxy settings! This makes me very happy. I've also tried the same thing on my previous phone, the T-mobile MDA (Wizard) and the ended up with the same result!
I've just got a Treo 750 and I am on T-Mobile but I do not know what settings to enter to get onto the internet. Any ideas? Thanks.
if you have t-mobile, the setting should be loaded automaticly (it did to with my Treo at the german T-mobile). Or you use the manual on https://shop.dangaard.de/files/Qtek/Qtek.htm
There you can also download a setting cab which you can install - this will automaticly install the settings.
I am a long time reader newer poster. I am coming from a Treo 750. Is there anything I should do to this before I start adding my apps and transfering contacts? Is there a better backup of my Treo other than the Windows Vista Sync? I am mainly concerned with contacts and software. Also I am on Att I heard about the only thing I need to do is swap Sim card out, also should I adjust the wap settings for this to work. [email protected] password CINGULAR1. Also does it matter when syning new device the device name be the same? What is the best ROM I should have?
ATT
I also use att and all i have to do is set up the network to use media net and tell it under advanced to not use the proxy. It should work fine for you then. I am using Bepe rom 6.3 premium. The connection wizzard sets up right for ATT in the us except fothe proxy. you do npot have to enterthe wap settings they are there already.
Coming from my 750, I didn't have to do a thing - just stick in sim card and I was good to go. I am on the PDAConnect plan so no issues with proxies and such.
As for backup, use Sprite. It comes with the Cruise on the CD.
Thanks I will do that. I should have it in my hands tomorrow morning.
mpf54 said:
I also use att and all i have to do is set up the network to use media net and tell it under advanced to not use the proxy. It should work fine for you then. I am using Bepe rom 6.3 premium. The connection wizzard sets up right for ATT in the us except fothe proxy. you do npot have to enterthe wap settings they are there already.
Click to expand...
Click to collapse
I got my phone installed bepe rom premium, I thought I got all of the att settings correct I am able to receive sms and email but for some reason It only has edge when before the rom i was getting hsdpa and 3g speeds. can you please take me through a small tutorial of what excat settings I need in the connections panel. I have only 1 listed MEdiaNet I then went to the advanced network and it says: turn on HSDPA it is checked, GPRS PAP authentication is checked, CSD Line Type data rate 9600 bps(v.32) connection element Transparent, SMS Service SMS over GSM. What else do I need to do? Please help
Also under comm manager it shows no data connection available?????
I figured it out. I removed all settings and went through the connection wizard. Also I forgot to change the band type to auto, that is why I would only get edge speeds. I wasnt sure about the proxy settings, I was supposed to checkit not uncheck it. and found the server settings and port numbers. Thak for everything. This phone is so much better than the treo 750. Well worth the money. No more square screen for me.
Out of curiosity what do we need to set the proxy to? Is this for using tethering or something else? I am on ATT as well and the auto network configure app thing seems to have set it all up correctly. Is there anything additional to be done?
Just started getting a problem with the MMS on my Serra and not sure if anyone can let me know theirs please.
Under connections/My ISP I have
Mobile Web - Cellular Line (GPRS,3G), mobile.o2.co.uk, o2web/password, DNS 193.113.200.200, Alt DNS 193.113.200.201
Mobile Web 2 - Cellular Line, mobile.o2.co.uk, o2web/password, DNS 193.113.200.200, Alt DNS 193.113.200.201
My Work Network
02 Active - Cellular Line (GPRS, 3G), wap.o2.co.uk, o2wap/password, user server specific
MMS Settings
o2uk - Gateway 193.113.200.195 port 8080, server address http://mmsc.mms.o2.co.uk:8002. Connect via My ISP
Thanks
Sorry all fixed myself, my proxy settings were incorrect
What exactly was the error - I still cannot get MMS to work even with your seetings from your post?
I found out that mine was that a proxy server was enabled. I hook mine up to my laptop while in the office to charge and activesync with my Exchange server. Hadn't realised that it also enables my office proxy server.
crazyC, is the SIM in your Serra on O2 contract or Pay and Go? I'm guessing it's the former, but if it's the latter I know the settings...
Is it just MMS that's not working, or is your data connection (via telephone I mean) not working either?
It was just MMS that did not work.
I am on contract, and after a lot of digging and trialling of cabs that should have fixed it, but didn't, I have sussed it out and tested it.
I will roll the settings into my O2 setup cab, test it, and then post it if anyone wants it.
YES! Please post it.
I am using these settings on my contract o2, htc touch pro. all my 3g and internet works... just no mms.
I have sat here for four hours now messing around with it...
any chance of posting the settings that worked for you?
Try this
MMS Settings
o2uk - Gateway 193.113.200.195 port 9201, server address http://mmsc.mms.o2.co.uk:8002. Connect via My Work Network
Other connections as per the normal O2 set up.
'My Work Network' shows up as O2 Active
Dont forget to set the O2MMS server as the default under MMS options
I havent tested this yet, but this cab SHOULD insert the O2 MMS settings - note you must already have the correct O2 network setup for calls and data, this is just the MMS bit.
im also having prblems with this, using the new Elite RC4. Im gunna reflash it and try again cuz i have fiddled with the settings too much
Edit - i tried the cab and the setting listed above it and neither worked for me
I have called O2 to see if they can help me and they sent me the some lame ass intruction which are exactly the same as on here... except afte you set up the o2web settings it says to use auto download for the rest :/
Whats the deal witht he proxy for the o2 active settings are they supposed to be on or off and if on, what do i set them as?
Installed the original O2 ROM to get all the settings working properly. It seems the missing details are in the WAP Proxy ones.
start - settings - connections - connection settings - manage existing under the 'my work network' (or whatever you renamed it too) - proxy (ensure use proxy is ticked) - advanced
WAP - 193.113.200.195:9201
SECURE WAP - 193.113.200.195:9203
Other than that settings are as they have been mentioned previously
MMS issues
I have extensively searched forum after forum and this seems to be the only thread with the sort of info i am searching for. I have installed TPC V3.1 Rom With required radio, everything works including MMS, however, no matter what settings i try i cannot receive normal sized pictures and any MMS videos go straight to the O2 website and all i get is a message your phone is not compatible with this type of message. Can anyone help, its really annoying............
I have tried the above .cab file and it doesn't work for me either.
Thanks in advance for any help.
O2 serra (raphael) win6.5, TPC v3.1 radio 1.14.25.05
Kevfm said:
I have extensively searched forum after forum and this seems to be the only thread with the sort of info i am searching for. I have installed TPC V3.1 Rom With required radio, everything works including MMS, however, no matter what settings i try i cannot receive normal sized pictures and any MMS videos go straight to the O2 website and all i get is a message your phone is not compatible with this type of message. Can anyone help, its really annoying............
I have tried the above .cab file and it doesn't work for me either.
Thanks in advance for any help.
O2 serra (raphael) win6.5, TPC v3.1 radio 1.14.25.05
Click to expand...
Click to collapse
Try some of these reg edits.
Thanks, but that is more for increasing the send size limit of mms, I can send them fine, but my network O2 cannot determine what phone I have and therefore only allows me to receive the smallest possible sized attachement.
I have tried numerous settings and radios to adjust this I've even tried the get settings feature and I get a txt back sorry we are unable to blah blah blah. with out going back to O2 stock rom i'm running out of options.......
Also I have never attemped to edit the registry
Again thank u for your reply......
EDIT......
Attempted reg edit, has had no affect, am I doing something Wrong.......?
o2 mms size problems
crazyC said:
I havent tested this yet, but this cab SHOULD insert the O2 MMS settings - note you must already have the correct O2 network setup for calls and data, this is just the MMS bit.
Click to expand...
Click to collapse
Hi guys, I have entered all the settings found on here and my mobile web and mms work but the mms messages received are resized to a tiny default size as mentioned on here.
Any chanch of an idiots guide to edit the registry so that o2 think it's another phone allowing me to received full size pics.
My phone is a Vodaphone UK HTC Touch Pro2 with O2 Pay Monthly Sim.
Any help is appreciated