Database Info

Send Multiple SMS Problem :/

Guys!
when i send a msg to someone, very very often instead of sending 1sms it sends several, ranging from 2 to 6 even.
so heres the story:
1. write sms to a friend. = 1 sms less than 160char
2. send sms to friend
3. receive delivery report, or even if option is off, no matter.
4. get a reply from my friend that i sent him the msg several times.
- this is not isolated case, this has happened with numerous numerous numbers. from different networks and different numbers etc. so theres a problem i think. whats wrong?

Are you using software like SBP pocket plus, to really close apps? When the mail program is closed to soon it resends the message!
If this isn't the case i got no idea.
Regards, M

nope not spb pocket plus.
i'm using wisbar advanced 2 and i have spb time installed. do you want a list of all the applications i got installed to check it out?
how bout a situation when i just choose NEW - > MESSAGE (from the today task bar). finish writin. click send and of course it closes it. what bout then? does it also count as too soon closed?

Not sure what is counting as 'closing too soon'. I never faced the prob. myself though I'm trialling SBP pocket plus. There are more posts/theads about this particular problem, maybe a search can help you as I only tried to pass info through that I've read on the board.
Regards, M
Ps. locatation Hospital sounds not to good.

Found this info for you maybe it helps reading it:
http://forum.xda-developers.com/viewtopic.php?t=12313&highlight=sbp+sms
http://forum.xda-developers.com/viewtopic.php?t=7155&highlight=multiple+sms

Hospital
--> I'm a med student, and believe it or not, most of my time is spend in the hospital - therefore i write on the forums from the hospital whether its my pda or from a pc there, or my laptop, and i practically spend tons and tons o time there reading, studying, etc
but i'll take that into consideration and perhaps change it thx mate!

SMS auto sender

first of all sorry for my english....
I want know if is possible send an sms in auto if i write and send it when i'm out of zone with signal !!! i don't find nothing on this argument.
another question, it's possibile customize the led of the touch pro for example for know when i'm out signal-zone????
I hope that i can explane my self! by
thank's

as far as im aware the fone will hold in outbox and resends when it picks up signal so its done auto. but might be different in your country :s

in fact in my country and with WM6.1 the sms is not resend in auto!!

hmm ur rite..i went to a place i know i dont have sig and tried on my samsung omnia and on my old noika 6300. both of course didnt send... when i picked up a sig my old nokia 6300 sends again but my new samsung does not...
so i also need a programme to auto send..i created a post here. http://forum.xda-developers.com/showthread.php?p=3383314#post3383314
i hope some1 will help us

try AUTOSMS
http://forum.xda-developers.com/showthread.php?t=478649

not bad but if u just want to send the sms once when u get sig it doesnt have that feature.
still useful tho

Messaging on the Touch Pro 2

Hey, sorry if someone already made a thread on this, I wasn't sure what to search for to find out, but here it is:
On the TP2, and I'm sure everyone with this phone has noticed it, while viewing txts in conversation mode, if you leave the conversation open and recieved X amount of messages from that person, when you close out, it will still say you have X number of unread messages, and you have to open and close your conversation X number of times before it shows as no unread messages.
I'm hoping HTC makes a fix for this soon because it is really annoying, but I wanted to see if any of you very capable guys here can make a simple cab fix for it.

I've noticed similar problems and I think it's a bug in the TF3D interface unfortunately.

Holy cow, that was my biggest gripe. I just stopped going into the WM messaging and I use the tf3d instead (click on the first msg from the messaging tab) and stay in there. It works right.

I almost always use the TF3d interface and I still have go occasionally go back in and enter the message again to get the indicator to go away, even after I've responded!

Agreed I hate it. I am not using the HTC interface (went with SPB) but if I get messages and chat in the SMS window it will not mark them as read. I HATE IT!

I haven't tried using the TF3d to see if it works better. I always used the default WM home screen cause I like it better. But either way, yeah hoping they will fix it lol It did it on my TP also, but only after I installed the latest update. With it being on that and on this one, I almost wonder if it wasn't a glitch and maybe it is intentional idk

I have also noticed it too. My old touch pro did the same thing. I have noticed on the touch pro two it changes between two different styles of text messaging screens, it really messes me up because the send button ends up in different spots.

when you're on the sms thread and you're talking to person just use your arrow keys to go up towards the one you haven't read. it'll show a closed envelope to the left of the message and as you press up and pass them the envelope opens up. no need to open and close.

Yes from the SMS inbox that's fine, but from the TF3D interface which is easier to get to than the SMS inbox if you're running TF3D then sometimes you need to read it again.

I was hoping they fixed this in 6.5 but NOPE of course not. WHY THE HELL ARE THERE TWO MESSAGING PROGRAMS!?!?!

kamitsuna said:
I was hoping they fixed this in 6.5 but NOPE of course not. WHY THE HELL ARE THERE TWO MESSAGING PROGRAMS!?!?!
Click to expand...
Click to collapse
Exactly my question. I just disabled TF3D and use WM default I like it better. Plus you free up some resources.

tuxdreamerx said:
Exactly my question. I just disabled TF3D and use WM default I like it better. Plus you free up some resources.
Click to expand...
Click to collapse
You disabled ALL TF3D or just the SMS in TF3d?

I used SBP Mobile Shell as a replacement for a bit, but i had some problems with it too....Are there any other shells out there worth looking at that might correct some messaging issues?

On a somewhat related note, has anyone else noticed that some people you get text messages will be an hour behind? Like you recieve the txt at 5:30pm and it shows as 4:30pm? My TP did this also. I don't know if there is a setting or something...

dont know if yall figured this out but the second post in this thread http://forum.xda-developers.com/showthread.php?t=585101&highlight=mark+read has all your answers. I installed the program and works like a charm. i now have the "mark all as read" option FINALLY!!!!!!! that little orange baloon with the little number was driving me absolutley nutts.

So i have a USCellular TouchPro2 fresh out of the box....
Somehow its stuck showing 1 unread message in the SMS inbox...i have tried deleting every text from the system...installing the InboxExtender and using the mark all read option..the rogue (1) still appears....anything else i can try ??
Thanks
UPDATE --
US Cellular says its a know bug that they are working to resolve....no ETA for the patch of course.....

philekins said:
So i have a USCellular TouchPro2 fresh out of the box....
Somehow its stuck showing 1 unread message in the SMS inbox...i have tried deleting every text from the system...installing the InboxExtender and using the mark all read option..the rogue (1) still appears....anything else i can try ??
Thanks
UPDATE --
US Cellular says its a know bug that they are working to resolve....no ETA for the patch of course.....
Click to expand...
Click to collapse
Try the fix unread message count. Copy to phone and run then reboot.

Hey, on this topic, how do I make it so my default sms is the windows version instead of the HTC one that?
Anyone have a cab for that or can help me for the 6.5 update VZ tp2?

mac_0384 said:
Hey, on this topic, how do I make it so my default sms is the windows version instead of the HTC one that?
Anyone have a cab for that or can help me for the 6.5 update VZ tp2?
Click to expand...
Click to collapse
+1 I wanna know this too except for the TMOUS version. I kinda hate the TF sms. Also has anyone noticed thatg when you type in a recipients name, it brings up ALL their numbers? My Tilt used to only show me mobile numbers for the recipient (which makes sense since land lines and faxes dont typically receive texts DDUUUHHH!!!) but i have on occasion sent a text to a friends home phone or fax!!

+2 I also would like to know if i can make WM my default SMS.

WM6.5 and Avaya as dialler

Hi,
I am new on this portal but I read a lot in the last days and was very surprised of the solutions you find and also the apps you made working. Great
I know its not looking very good to ask as newbie for help but I hope you can help me... I am searching for more than a week for a solution and tried even to edit the registry but unfortunately I am not good enough to find the solution
So what do I want do to?
I have a HD2 (branding free) and I want to install Avaya One-X mobile.
Well the installation was succesfull and I also get it running inside my company and also the private modus. But since I have it installed I hear no ringtone. It always plays an "ding" and thats all.
So right now I always have to keep my eyes on my mobile to see if someone calls me or not.
And the second problem is that I also get no caller picture displayed..
But as soon as I deinstall the one-x everything is working (phone rings and caller picture is displayed)????
So you are my last hope to find a solution. Please can you help me?
If you need any further infos please let me know
Thanks
Frank
oh... the one-x mobile software is free for download on the avaya webiste
I can post you the link later (I am not allowed to post it right now...)

i'm getting mad with it...
Now I am a step further.. I now that the software deactivates the onboard call handler. I think it is only a registry setting to reenable it. after done the caller name+picture should be displayed and even the call-slider should be back.
Does someone have an idea where I can find the entry?

well now I know exactly the differents between the registry with one-x installed vs without. But I have no experiences in reading/interpreting my results.
Is a Dword something which can be used as name? or is it only a value?
Does someone has a guide for beginners please?

Did you contact Avaya support for assistance?

I have recently taken over all our telecoms at the office (avaya system)
Saw your post on One-x and been reading a little on it. Where did you get the install files from and did you get it working in the end?
I have a support contact with a company called central so I can contact them for free advice if needed

is this the version you are using?
http://support.avaya.com/css/appman...loads/P0438/5.2.x/C201012083328498084#summary
I'll take a look at what the installer does as I've not heard of it before but it's not letting me register to download it .

yep that's the software I am trying to download
Could not create an account either
I have emailed my support company and they will be sending the software to me on a disc.

thanks for your responses.
I installed the version for pocketpc WM6 (not the UC version) and yes it is working fine
But:
The problem I have is that since I have it installed it
- my mobile does not play a ringtone any more
- "slide to answer" and "show caller name+picture" is away

When I get the disc tomorrow ill post up the results.
This app will be very helpful if i get it working
As for the no ringtone issue I am not sure.

I would attach it... but i have no permissions...
@ fards: there are two versions. one for "Windows mobile 5"and the other one for "Windows mobile pocket pc" (here you can find it for WM6). the first is a UC versions. For this you need an internet connection and a uc-server running in your company. the other one is for normal mobile use. it calls via the phone connection the server and then your call is managed by the server.

support.avaya.com/css/appmanager/public/support/Downloads/P0483/C20090710162819340875658#files
you can find it here for free and you need no login

I do not see the HD2 listed as compatible device.
Did you get it working or still having problems?
How does the Avaya interface on the mobile phone look like?
Is it replacing the WM dialer completly or only while Avaya software is running in the background?

I have just installed it onto my HD2. The install hung at the end for about 20 mins. Reset device and the software has replaced my dialer. Appears to be working but im reading on how to configure the ini file now.
Tested on personal mode and call connected fine.

it replaces the dialer completly...
for the ini file you need the settings of your ACM. here you have to enter different extensions for each function...
you also has to to enter your mobile number in the ACM. Because your are identified via your number.
But can you test if you get a ringtone for incoming calls? thats my problem. I get no

Just to draw a conclusion to this This topic. This solution does not work correctly on HD2. Unless someone has managed to do this and has not shared?

sry... I was offline for a while... Does somesone find the solution?

No i gave up in the end..... bloody crap

Tellme Application for the HD2

Hi Guys,
Just wanted everyone to know there is a free app called:
http://www.tellme.com/you
Its like Microsoft Voice Command.....maybe it is....maybe its whats included in the new WP7S, however its an app that works on 6.5 and its great, fast and I actually like it.
Take a look and watch the video too.

got a cab of it?

Right, It's USA only... HD2 isn't even on the list and not downloadable on that website.
So whats this post all about?

There is a cab available, it does work on the HD2, to a certain extent. It's from the Samsung Intrepid, which I believe is a non-touchscreen phone, so touchscreen doesn't work properly (and we don't have arrow keys to compensate).
The program promises a lot, but delivers poorly. The voice recognition is quite poor (on my Scottish accent anyway). It can dictate a text message, but you'll be lucky if it picks up anything you're saying correctly.

elyl said:
There is a cab available, it does work on the HD2, to a certain extent. It's from the Samsung Intrepid, which I believe is a non-touchscreen phone, so touchscreen doesn't work properly (and we don't have arrow keys to compensate).
The program promises a lot, but delivers poorly. The voice recognition is quite poor (on my Scottish accent anyway). It can dictate a text message, but you'll be lucky if it picks up anything you're saying correctly.
Click to expand...
Click to collapse
Thats true it doesnt work properly with non-american accents. I tried to search for La Tasca, it came back with a resualt of blackass.com ???????
I had to speak slow, but it did work eventually.
Out of interest, do anyof you have a cab for Microsof Voice Command ? I have the 1.6 version however it doesnt work on my HD2

vardig said:
Thats true it doesnt work properly with non-american accents. I tried to search for La Tasca, it came back with a resualt of blackass.com ???????
I had to speak slow, but it did work eventually.
Out of interest, do anyof you have a cab for Microsof Voice Command ? I have the 1.6 version however it doesnt work on my HD2
Click to expand...
Click to collapse
Make sure you use the corect MVS, i used 1.6 and it killed phone, not responsive to anything so hard reset saved me.
It actually requires MVS to work correctly but as others mentioned, its not good. Unlike the Youtube demo, it barely recognised what i say on several occasions and i spoke very cleary, slow and with no strong accent etc. Needs alot more work.

does not work at all on my hd2
i installed it and it loaded initially, then when i try to start it, it doesnt come up at all. i tried to install a new version of microsoft compact framework or whatever but then the phone will tell me i have to remove the previous version ,but then i obviously cant b ecause it does not appear in the remove programs list. this is very frustrating, can anybody help me?

Gateau Noël said:
i installed it and it loaded initially, then when i try to start it, it doesnt come up at all. i tried to install a new version of microsoft compact framework or whatever but then the phone will tell me i have to remove the previous version ,but then i obviously cant b ecause it does not appear in the remove programs list. this is very frustrating, can anybody help me?
Click to expand...
Click to collapse
Only worry about a newer version of .Net if you're actually told by an application that you need it. Also, when installing something and it tells you you need to remove the existing version, that means it's already installed. The .Net 3.5 installation will not tell you you need to uninstall .Net 2.0, so you've already got the version you tried to install. Just forget about it.

I believe it needs MSVC to work, although I'm not sure. I think I had to install MSVC.
I've never installed it since, since it was so crap - I have a very neutral accent, and even tried an American accent, but it was still pish.

i have it on my TP2......it suuuucks and my accent IS american, lol.
btw, it will put asterisks in place when you use curse words, haha, at least it recognizes them with no problem, go figure!

I tried to send a text message, it got everythin right, but the message just sat in my outbox ...
Anyone else try this??
Marty

i just noticed that 'translation', blackass.com, lol. i wonder what you would have got if you DID ask for blackass.com! :O) ahhh, technology, more fun than the proverbial barrel of monkeys at times!

better this , voice ommander or something else? just to understand the maerket now

works great on my tmobile htc hd2

Oh, I hate TellMe so much I want to scream. I've managed to successfully use it on two occasions (where it actually understands what I've said). More often than not, it simply "thinks" and "thinks" until, ultimately, saying "Sorry, didn't catch that". I don't doubt that it works great for some people, but for this thick-accented outer-Bostonian, TellMe is an exercise in futility (and definitely not an app to break out to show off the HD2's power!!).

martywix said:
I tried to send a text message, it got everythin right, but the message just sat in my outbox ...
Anyone else try this??
Marty
Click to expand...
Click to collapse
I'm having the same problem.
I downloaded the TellMe application for HD2 at mobile underground
I have installed the WMPPC_TP_TP2_HD2.cab on my device and the application runs but when I send a text message the message appears to send ok but then gets stuck in my outbox. The message stays there until I send a text the old fashion way and then all the text messages are sent out.
The instructions on the mobile underground website say to make sure you have .NET CF 3.5 version:
*TELLME*: Install NETCFv35.wm.armv4i.cab.zip first on your WM PPC, before installing the TellMe App, get it here media..fire...
Click to expand...
Click to collapse
But, I when I tried to install this I received a message saying I already had a newer version. See screen shot showing my 3.5.9198.0 version of the .NET Compact Framework. So, I'm assuming I have a newer version that should work with the TellMe but so far I have been unable to get it to send text messages properly.
Also, I'm running Voice Command v1.6.21889 , which came on the phone originally.
Has anybody else had this problem? Anybody know of a solution?

I have two T-Mobile HD2's sitting here with this installed, all work fine, except the same outbox issue on texts. I wonder what could be the issue or if there was some way to trigger the sending automatically.

I have an idea but not sure how to make it happen.
Obviously the TellMe application is only composing the message and putting it in the outbox.
So, the HTC Messaging should be able to periodically tell that a message is waiting or simply just try to send messages every now and then. After looking at the option in the Settings->Options while you are in the message application you can see that there are 4 options for Delivery: Immediate, 1 hour, 1 day, 1 week.
I wonder if there was a way to set the delivery at 1 second if it wouldn't try to send the message. This is just an idea and I'm not very experienced in customizing phones but I do some programing and could see this as a possibly.
____
The other option would be to write a small program that would check the outbox and send any messages in it. Then you could use voice command or tell me to run the program by creating a short cut the this small program and calling it "Send Messages" or something like that.
Anybody have comments or suggestions on either of these ideas?