Related
Since yesterday, I am unable to connect to internal GPS on Touch Pro.
TomTom, iGo, google maps say "No GPS Device found".
It has happen after upgrading ROMeOS to 1.21 and restoring with SPB Backup using "Rom upgrade mode".
Other side effect is that QuickGPS update goes to 70-80% and then says "Unable to connect". It happens either by GPRS, WiFi or ActiveSync connection.
Do someone have an idea what happen?
Thanks!
I had a similar problem after I tried to upgrade TomTom on my Touch Pro...no GPS found...After I restored a back up fromSprite back up (latest version), the problem was the same! I did a hard reset and started over.
I'm currently looking for back up software that will allow you to back up the registry to a file that can be applied after a restore. I'm not fully convinced that this is the problem but I'd like the option anyway.
If your phone has Google Maps installed, try uninstalling it.
I was having the same problem with Destinator 7, but it was solved by doing that. I found this solution in some thread here, but can't remember exactly which.
You don't have to uninstall google maps. Simply go to GPS settings and from automatic, set the GPS port to 4.
Also check your external GPS port is Settings--System. I set mine to 5 and the GPS wouldn't work. I set it back to 4 and it was ok again
jradev said:
Since yesterday, I am unable to connect to internal GPS on Touch Pro.
TomTom, iGo, google maps say "No GPS Device found".
It has happen after upgrading ROMeOS to 1.21 and restoring with SPB Backup using "Rom upgrade mode".
Other side effect is that QuickGPS update goes to 70-80% and then says "Unable to connect". It happens either by GPRS, WiFi or ActiveSync connection.
Do someone have an idea what happen?
Thanks!
Click to expand...
Click to collapse
For TomTom configure your GPS reciever to "other NMEA" COM4 and 4800 Baud.
Works great for me.
XL3N7 said:
You don't have to uninstall google maps. Simply go to GPS settings and from automatic, set the GPS port to 4.
Also check your external GPS port is Settings--System. I set mine to 5 and the GPS wouldn't work. I set it back to 4 and it was ok again
Click to expand...
Click to collapse
I tried it, com5, com6...no positive result.
It was working fine before ROM upgrade and no changes were made to GPS settings, it just stopped working.
It seems that hard reset is needed unless no other possibility with changing config, registry etc.
I've seen lots of people complaining about poor GPS performance - slow to lock, not finding many sats, lag, etc.
But I can't get anything at all from my Touch Pro. I've tried several radio roms, no difference, tweaking the registry settings, and programs called GPSID Settings, GPS Test, and HTC GPS Tool, all without any success.
I believe I should be able to use the HTC GPS Tool to debug, and see the actually serial output of the onboard GPS? But I can't even do that, whatever serial port I try to open I get the message "Failed to send NMEA command...". This suggests to me that the onboard GPS is not giving any response at all, rather than not being able to lock?
Can anyone confirm 100% what com port and baud I should be able to find the on board GPS with? Is there anything else I can try?
BTW, my external B/T GPS works fine with my touch pro, but it would be nice to have the onboard GPS working too.
TP GPS always uses COM4 and any baud (I've tried 4800 to 115200).
Your post is not a "thread" yet and I doubt it will be.
Just search the other threads.
a bit dettered when reading all these GPS problems. Once I've got mine I've had no problem at al besides it showing me a bit off the road in Google Maps. as far as for settings its always been the same COM4 Baud 4800
mike-b said:
I've seen lots of people complaining about poor GPS performance - slow to lock, not finding many sats, lag, etc.
But I can't get anything at all from my Touch Pro. I've tried several radio roms, no difference, tweaking the registry settings, and programs called GPSID Settings, GPS Test, and HTC GPS Tool, all without any success.
I believe I should be able to use the HTC GPS Tool to debug, and see the actually serial output of the onboard GPS? But I can't even do that, whatever serial port I try to open I get the message "Failed to send NMEA command...". This suggests to me that the onboard GPS is not giving any response at all, rather than not being able to lock?
Can anyone confirm 100% what com port and baud I should be able to find the on board GPS with? Is there anything else I can try?
BTW, my external B/T GPS works fine with my touch pro, but it would be nice to have the onboard GPS working too.
Click to expand...
Click to collapse
The default com port is 4. Usually most GPS application should be able to detect it automatically.
NLS said:
TP GPS always uses COM4 and any baud (I've tried 4800 to 115200).
Your post is not a "thread" yet and I doubt it will be.
Just search the other threads.
Click to expand...
Click to collapse
Sorry, I thought I did start a new thread, and I have searched - that's how I know about other people's GPS issues. But I haven't seen anyone else with the same problem as me yet.
I get nothing on COM4 at any baud rate.
TomTom says 'NO GPS Device'
HTC GPS Tool says "Failed to send NMEA command..." on COM4 (at all baud rates).
Google maps - when set to "Managed by Windows" just says Searching(0) and gives up after about 5 minutes.
When Google Maps is manually set to COM4 it says "Initialising.." in the top right corner then hangs, and then refuses to reload until I do a soft reset.
Is this what's supposed to happen?
No it's not.
You could have a hardware problem.
I had that issue after uninstalling google navigator 4 trial.Hard reset helped.
Also check Start > Settings > System > External GPS and make sure the Program Port is set to COM4, Hardware should be Port None and Baud at 4800 and Access tab should be checked to Manage GPS Automatically.
I have the "dreaded GPS lag" issue. I don't have this issue but I have found that my GPS is best with the Blackstone Radio 1.10.25.25. I still have to wait sometimes upwards of 3 minutes for a lock sometimes when the sky is cloudy but it seems to work pretty well.
I suggest you try the following
1. Flash to the radio I mentioned above.
2. Go to Start/Settings/System/AGPS Settings
On the General tab, uncheck "Enable AGPS
On the privacy tab, select the following options:
1. Enable AGPS location information to network services. Operator can get your location information.
2. When send location info. to network services: Send postion info directly
3. Close confirmation message after: 10 second
3. Go to Start/Settings/System/External GPS and make the following changes:
On Programs tab: set GPS program port to: COM4
On Hardware tab: set GPS hardware port to: (None)
On Hardware tab: set Baud rate to: 4800
On access tab: check: Manage GPS Automatically (recommended)
4. Follow the instructions posted by omega01 here:
omega01 said:
A lot of people have problems with the TouchPro GPS especially for pedestrian use...
From stock the TP GPS is quite unsable in car especially with TomTom 7 and totally unusable for pedestrian use.
After 2 weeks of reading and testing tweaks, here are the results of my tests and the applied tweaks to enhance the GPS performance
A. With Advanced config 3.2 http://www.touchxperience.com/fr/ou...ads/9-advanced-configuration-tool-32-cab.html
1. disable A-GPS
2. disable GPS logging
3. logfile name must be empty
4. old logfile name must be empty
5. maximum size of logfile must be 0
6 delete the files : \windows\GPSLogFile.txt and \windows\GPSLogFileBack.txt
7. it seems that if TomTom is installed on a fast microSD decrease the lag(have to test to be sure)
With those changes car usage will be quite perfect
B. Then edit registry with TotalCommander http://ghisler.fileburst.com/ce/tcmdpocketarm.cab
Under: HKLM\SYSTEM\CurrentControlSet\GPS Intermediate Driver\
- Drivers\GpsOneDevice\PollInterval -> 100 (default is 1000)
- Drivers\InputBufferSize -> 512 (default is 4096)
- Drivers\OutputBufferSize -> 512 (default is 4096)
- Drivers\SleepOnNoData -> 100 (default is 1000)
- Multiplexer\MaxBufferSize -> 512 (by default not present, you have to create it)
Tests to be done with buffers at 256...seems to be a little better
Tests to be done with other PollInterval value...seems to "drain" battery
With those tweaks pedestrian usage will be much better but not perfect...I explain.
You have to walk for a least 250m in order to have a reposition with mouvement on the map (before that, speed is always 0km/h) and then if you continue to walk there is quite no lag...and the speed reflect reality
...BUT if you stops you have to walk again for a least 250m in order to have a reposition with mouvement on the map and then if you continue to walk there is quite no lag...
Very strange indeed...
I hope this will help people...please test and feedback.
PS : tests were done with
TomTom_Navigator_7.450.9028_R3_VGA_black_edition
GoogleMaps 2.2.0.16 -- http://www.google.be/gmm/GoogleMaps.CAB
GPSTuner 5.4 -- http://www.gpstuner.com/download/GPSTuner_v5.CAB
Click to expand...
Click to collapse
If that doesn't help you get a better, if not good, lock with your Touch PRO then you have to have some kinda of hardware problem.
I have an HTC Fuze from USA AT&T activated on T-Mobile USA and I don't even have access to T-Mobile's AGPS Servers and my GPS locks are usually relatively quick.
Good luck!
Dan
dharvey4651 said:
I have the "dreaded GPS lag" issue. I don't have this issue but I have found that my GPS is best with the Blackstone Radio 1.10.25.25. I still have to wait sometimes upwards of 3 minutes for a lock sometimes when the sky is cloudy but it seems to work pretty well.
I suggest you try the following
1. Flash to the radio I mentioned above.
Click to expand...
Click to collapse
I've been using .25.25 radio for the last week, changed to 1.09.25.35 today, but no improvement.
dharvey4651 said:
2. Go to Start/Settings/System/AGPS Settings
On the General tab, uncheck "Enable AGPS
On the privacy tab, select the following options:
1. Enable AGPS location information to network services. Operator can get your location information.
2. When send location info. to network services: Send postion info directly
3. Close confirmation message after: 10 second
3. Go to Start/Settings/System/External GPS and make the following changes:
On Programs tab: set GPS program port to: COM4
On Hardware tab: set GPS hardware port to: (None)
On Hardware tab: set Baud rate to: 4800
On access tab: check: Manage GPS Automatically (recommended)
4. Follow the instructions posted by omega01 here:
If that doesn't help you get a better, if not good, lock with your Touch PRO then you have to have some kinda of hardware problem.
I have an HTC Fuze from USA AT&T activated on T-Mobile USA and I don't even have access to T-Mobile's AGPS Servers and my GPS locks are usually relatively quick.
Good luck!
Dan
Click to expand...
Click to collapse
Rechecked all my settings, but they were all already as above. Still no joy. Only other possibility is that it's being crippled by the ROM I'm using - stock 1.90.206.4 WWE O2 UK variant, although no one else seems to be having the same problem. I am trying to avoid reflashing the main ROM, as it would take hours to get all my programs and settings back to how I want them. Maybe when the 2.0 firmware is released...
I guess it could be a hardware fault, but it seems a bit of a long shot. I really don't fancy my chances of trying to convince o2 that it's a hardware fault.
Try this...
1. Install and configure SecondToday to the left soft-key
2. Install HTC Home Plugin for VGA
3. Install GPSToday plugin and configure it to 5 minute manual-on
4. Go to Start/Settings/Personal/Today and disable all but TouchFlo 3D
5. On your new SecondToday, enable HTC Home and GPSToday
6. On HTC Home's Programs Tab, add your favorite GPS program(TomTom, Garmin, Google Maps, Etc...)
7. Start GPSToday by clicking on the little red box on the far left. It may take about 2 minutes on the first try(it's this way after every soft-reset) but after that it should be much faster. As soon as you are locked on to 4 or more satelites start your favorite GPS program that you added to the programs tab of HTC home.
If it works like it did for me, you should be set. I now get GPS locks in less than 10 seconds every "second time" since it takes about 2 mins after each soft-reset.
You can download all the files I mentioned above here:
http://download.ppchaven.com/CDMA Devices/HTC Vogue/Users/dharvey/CABS/CAB FILES.rar
Good luck!!
mike-b said:
Maybe when the 2.0 firmware is released...
Click to expand...
Click to collapse
IF you mean, not when
dharvey4651 said:
Try this...
1. Install and configure SecondToday to the left soft-key
2. Install HTC Home Plugin for VGA
3. Install GPSToday plugin and configure it to 5 minute manual-on
4. Go to Start/Settings/Personal/Today and disable all but TouchFlo 3D
5. On your new SecondToday, enable HTC Home and GPSToday
6. On HTC Home's Programs Tab, add your favorite GPS program(TomTom, Garmin, Google Maps, Etc...)
7. Start GPSToday by clicking on the little red box on the far left. It may take about 2 minutes on the first try(it's this way after every soft-reset) but after that it should be much faster. As soon as you are locked on to 4 or more satelites start your favorite GPS program that you added to the programs tab of HTC home.
If it works like it did for me, you should be set. I now get GPS locks in less than 10 seconds every "second time" since it takes about 2 mins after each soft-reset.
You can download all the files I mentioned above here:
http://download.ppchaven.com/CDMA Devices/HTC Vogue/Users/dharvey/CABS/CAB FILES.rar
Good luck!!
Click to expand...
Click to collapse
Thanks for that. I've given it a try and it doesn't get a lock or even see a single satellite for me. I assume the number in the green box that appears next to the satellite symbol is the number of satellites it can see? It never changes from 0 anyway.
I've never seen a single satellite with the onboard GPS, nevermind gotten a position locked. Beginning to think it's a hardware fault, or my phone got missed when they were putting the GPS in! Convincing O2 that there's a fault will be one thing, then I'll have to flash it back to stock, including the stock bootloader before I send it in.
NLS said:
IF you mean, not when
Click to expand...
Click to collapse
That's why I put a string of dots on the end ot it...
Don't you think it's imminent, why would they release it for diamond and not touch pro?
I had the same problem for about 2 months, could never get a signal. It was solved when I changed ROM's. I actually tried like 7 ROM's and GPS didn't work in 6 of them. Once I tried RSW's ROM with updated GPS Drivers,,, I am able to always get a GPS signal now.
I do use 2 programs though.
1. QuickGPS to download GPS data.
2. Chartcross GPS Test to open my GPS Port.
Then I open up any GPS program and they all work. (Google Maps, Live Search, iGuidance)
COM Port should be COM4 obviously. When I've used a few GPS programs that "scanned" my phone, they all set the baud rate to 9600. You can't change the baud rate in Settings, but if you have to manually set your baud rate in your program, set it to 9600.
GPS reception significantly affected by case.
Just a FYI. I was a Fuze owner with significant problems with GPS. Could not get it to connect to anything for anything with anything. After trying everything I found on the forum I followed the instructions on this thread ... http://forum.xda-developers.com/showthread.php?t=473481&highlight=lock. and got a lock in under ten minutes. Put my phone back in the case and could no longer get a lock. It then dawned on me that my aluminum case was interfering with the gps chip. Did a bunch of tests which confirmed the reception improved drastically outside the case. It doesn't seem to influence the radio reception however which I find a bit strange. Anyway. My gps works reasonably well and I think people will benefit from knowing something as simple as the choice of case could have something to do with their gps reception.
I need some serious help. I tried to get the Fuze GPS to work and I used GPS test and google maps. I had it working briefly. However, now my fuze will not save the hardware settings for the GPS. I have changed them under the hardware profile in system settings. Once I do this and exit, it does not save the changes. When I go back into the settings, they are the default settings again. Any help is appreciated.
What hardware settings?
In google maps settings should point to "managed by windows" in iGO and Garmin to Com4 with a 19200 bitrate in TT either Com4 or NMEA...
The "external GPS" settings. Attempting to change to COM4, but when I exit settings it doesn't save them. It did earlier in the day.
What EXTERNAL GPS unit do you have???
Don't tinker with GPS because most common you'll end up doing a hard reset!!
IF you have an EXTERNAL GPS do NOT set it to COM4 because COM4 is taken by the INTERNAL GPS.
Not using external gps. Using internal one. Try to set to com 4 unsuccesfully
Don't tinker with GPS because most common you'll end up doing a hard reset!!
Click to expand...
Click to collapse
No need to set ANYTHING.
Leave it alone
Why you want to play with it and change settings especially since you CONFIRMED that it works/worked
In your own words:
I used GPS test and google maps. I had it working briefly
Click to expand...
Click to collapse
GPS is an issue, there are 1001 post regarding slow lock, no lock, good lock, lag and no lag - P L E A S E do some research.
For now do the following:
Power cycle phone
Go outside
Programs - Navigation - QuickGPS (to get the latest data)
Programs (or where you hide it) - Google Maps
In google maps:
menu - options - GPS settings "should say managed by windows" DO NOT CHANGE
Cancel
Menu
Use GPS and WAIT
You should get a signal within latest 10 minutes outside with an unobstructed sky view.
If NOT we can start to play
Thanks for the information. Will attempt this tomorrow. Great forums and thanks again for the help.
I am currently following a few websites to keep my news upto date with my ATT fuze. I have tried just about every single possible solution to get my GPS to work. Disabled aGPS, tried GPSTest, flashed various ROMs, tried various GPS programs, change poll interval to 500 ms, etc, etc.
I have owned this phone for 4 months now and I have yet to get a satellite lock to work. The closest I ever got was GPTtest running showing 6-7 different satellites in view, trying to connect to about 3 of them. I left that running for nearly 2 hours, and no luck. Whats the deal?
Please do not tell me to use the search function because I have searched XDA as well as google, and they all end up in the same place of speculation on why the GPS might not be working, but none of the said methods actually make it work.
It works man. I ran 6.5 beta with Google Maps installed. Took me to a location I've never been to and back.
xgm541, before using AGPS, do you have the right gprs settings for your phone? Have you confirmed that your gprs works?
Anyway, for the gps, read up on my thread about me finding an alternative way to get a better fix.
HERE:
http://forum.xda-developers.com/showthread.php?p=3514443#post3514443
Also, make sure you flash your radio if possible. Read up on the radio thread and i am sure other ATT users have posted the performance of GPS based on the Radio.
I am not an ATT user, as i am from Malaysia. So i am unable to help you on the AGPS part.
I second arvin's suggestion on flashing a radio. If you're in the US, I highly recommend 1.12.25.19, I have AGPS and GPS logging disabled, use GPS Test and always get a cold fix in less than a minute outdoors.
yeah ive got no issues with it, used it last weekend in the car and worked perfectly.
GPS definitely works. Flash the latest leaked AT&T rom, and just try it out. Don't flash cooked ROMs but the stock leaked ROM. If GPS doesn't work in that ROM then something is wrong with your particular phone. I'm in California and I get locks in under 7 seconds, and I'm using wm 6.5
GPS is about all that im unhappy with, on my fuze.
It does work, i placed a 3 stage multicache using only my fuze with googlemaps/GCz last week and everyone whos found the cache say my coords. were almost dead on. (coords were an average of around 20 readings at each site)
My trick (doesnt work fast but it works) is to turn on gmaps let it sit there for
1 min while it gets a lock, then switch to my gps (geocache) program and i have nps. I cannot get any other programs to lock or hold the gps without first running the googlemaps program. And everyonce inwhile as soon as i turn it on ill lock up 10 birds. Doesnt make much sense, and i too have played with all i could find (agps,baud,comport, windows settings etc)
good luck
I am using the standard HTC-ROM. All of these settings have been extensively tested in Europe the Netherlands. These are really the optimal, after testing many buffersizes, pollintervals etc. The most crucial one is PollInterval and SleepOnNodata needs to be equal or larger than PollInterval. Disabling or enabling windows GPS logging does not matter, as it is only used for debugging according to MSDN. If you start using AGPS (I Don't!) then make sure all settings are correct to download the info from your provider (mine does not support this and thus it is turned off in these settings).
0) Assuming that the hardware is still OK do the following:
1) Go to settings > System > external GPS.
Check if all options are still normal.
Program port is COM4.
Hardware port : none.
Baudrate : 4800.
Access: Check automated GPS control.
NOTE that an external connected GPS (e.g. Bluetooth device) unit will have a baudrate of 4800. The internal which resides at Com4 has a standard baudrate of 57600. These settings need to be checked to make sure they are still this way and it will also give Windows automated control of the GPS system.
2) You need to install Advanced Config 3.3.
http://www.touchxperience.com/fr/out…ol-32-cab.html
With Advanced config 3.3 under GPS:
1. disable A-GPS
2. disable GPS logging
3. logfile name must be empty
4. old logfile name must be empty
5. maximum size of logfile must be 0
6 delete the files : \windows\GPSLogFile.txt and \windows\GPSLogFileBack.txt
After these settings the tool will soft-reset your mobile.
3) Then edit registry with TotalCommander
http://ghisler.fileburst.com/ce/tcmdpocketarm.cab
Don't make any errors here, check your steps carefully.
Under: HKLM\SYSTEM\CurrentControlSet\GPS Intermediate Driver\
- Drivers\GpsOneDevice\PollInterval -> 100 (default is 1000)
- Drivers\InputBufferSize -> 512 (default is 4096)
- Drivers\OutputBufferSize -> 512 (default is 4096)
- Drivers\SleepOnNoData -> 100 (default is 1000)
- Multiplexer\MaxBufferSize -> 512 (by default not present, you have to create it, make a Dword value)
After these settings are in place, restart / soft reset your device.
4) Run the program QuickGPSfix and download the new data.
This step needs to be repeated anytime it is outdated.
5) Download and install the HTC GPS Tool.
http://rapidshare.com/files/84815853...C_GPS_TOOL.cab
Upon starting it should show COM4 and a Baudrate of 57600.
Go outside the house, preferably with good weather.
Hit the "Open"
Hit the "Nav. Int."
Leave all as is, no need to change the options.
You should now start to see the GPS data flow over your screen in the grey area. Wait patiently, the first fix can take up to 10 minutes (afterwards it wil go faster). If it fails it sometimes seems to help to move around a little bit and to reboot your device if it takes way to long (+10 mins).
See if you have any red bars below the satellite numbers (signal strength per satellite) When you get a fix, the bars and satellites to which it is connected will show up green. If there are no red bars here, no data flow etc then there is something wrong with the ROM / radio combination and your phone.
Close this program if you have a fix.
6) Start-up Google maps. Wait for it to download the basic map information, so you don't have any interference from the "now downloading data" message. Then start the GPS use. Fix should now go fast. Once it has a fix you can start moving towards your destiny.
From now on use HTC GPS tool to get a fix.
Close this program, start the program with which you want to use GPS.
Good luck, Jouke.
GPS works good enough.
I definitely suggest radio 1.11 or later.
Of course best to get the whole 5.05 ROM.
Work great! To nearly perfect location!
I'm using the ATT test ROM and google maps with street view.
Works better than any phone I've ever owned when the test ROM or a derivative is running the show. Matching radio must be used. I've tested the Ralphael 1.12.25.19 (shipped with test ROM) and the Blackstone 1.13.25.24 so far.
Messed around a bit more and got instant 10 sats after changing to
baud rate of 9600 on com4... i guess the windows management of the gps is most of the problem (?).
I had the same exact problem as you. I couldn't get a lock no matter what I tried, I was thinking of going back to the Kaiser. I then decided to change my radio from the .32 to the 1.12, left GPS Test running for about 30 minutes, still no lock.
I was standing on the balcony of my apartment....
Then..... when I got into my car I tried again and I got a lock in under 30 seconds..
Not to insult your intelligence by any means. BUT, are you outside in the open?? Because once you have set those settings that everyone here has asked you to do. It should work.
Here is what I did.
Change the stock radio. I believe this to be the main culprit. 1.12 works good. then set your standard GPS settings to Baud 96**** and to COM 4. Run GPS test in the open, outside.
It should work. I sometimes mess around with the AGPS settings. I mainly leave it off because I honestly have no idea what it is.
I get a lock in under 1 - 2 minutes every time. However, I am having a problem with the speed of the GPS. I use TomTom 6 and sometimes my triangle cursor wiggles oscillating from left to right. I don't know why. and also sometimes it is delayed.
I have yet to find a fix for this, I would be glad if someone can please help. I'm not sure if this is a video problem or a GPS problem.
Worked Both Ways
I've had my Fuze since just before ATT released them, and the GPS worked fine for me, once I could get a signal, obviously a big issue. I followed all of the GPSidfix cab etc and they helped, had to load GPS Test to prime, once it got a full lock and said running I could use Google, TomTom 6 or Livesearch and get instant locks.
I don't flash ROMs, but finally broke down and put the ATT Leaked Rom on my Fuze, and bammmmmm. GPS is almost instant in every single one of those applications, we're talking 2 or 3 seconds when I'm outside. I get locks in my house when I'm by the windows as well.
I haven't driven today, so I can't speak to lag etc or other issues, but once I knew the lag it never bothered me that much. Overall, the new ATT Leaked ROM has been awesome for GPS.
i never changed my radio, am using the stock radio on a fuze bought 1 1/2 months ago, i disabled agps and am using com4 baud 9600 super fast gps now.
GPS Position Lag w/ internal (built-in) GPS receiver
freekquency said:
i never changed my radio, am using the stock radio on a fuze bought 1 1/2 months ago, i disabled agps and am using com4 baud 9600 super fast gps now.
Click to expand...
Click to collapse
I can second or third... that.
Firstly, I don't mean to invalidate any previous comments, posts or fixes, or insult anyone's intelligence. I just merely report my VERY UNSCIENTIFIC findings.
I've had my ATT Fuze (HTC Touch Pro) for about 3 months now, and I've tested various GPS apps in the quest of finding out whether the hardware is the one to blame for the GPS POSITION LAG. I'd like to share my personal findings so that it may help others.
The ONLY GPS application that I can say that come very close to NOT having GPS POSITION LAG is Mobile Navigator 7.3.1 (build 137). On top of that, this version of Mobile Navigator is the only one so far to be ALMOST right on when the destination is reached. Other applications that I've tried always show the destination is 2 or 3 houses down the street.
The following applications I've tested all have position lag: one previous version of MN7, IGo8, TomTom 7, iGuidance, Garmin XT, and NDrive.
Did I use the registry tweak as suggested in previous post and did it resolve the lag?
Yes, I did try the tweak. But personally, I don't think it solved the problem.
Did I change to different ROM or Radio?
No. Everything on the phone is stock ATT Fuze.
So, is the hardware or HTC the one to blame for the lag?
Sorry! YOU have to come to the conclusion on this one.
I have a related problem, with the GPS device freezing (?) at high speed. I drove recently in Germany, and up to 120km/h my navigator (HTC-TP + Destinator 7) worked fine. When I drove faster it just stopped tracking, and resumed when I slowed down below 120km/h resumed.
Anyone experienced that or has an idea how to fix it?
Kepela523 said:
I had the same exact problem as you. I couldn't get a lock no matter what I tried, I was thinking of going back to the Kaiser. I then decided to change my radio from the .32 to the 1.12, left GPS Test running for about 30 minutes, still no lock.
I was standing on the balcony of my apartment....
Then..... when I got into my car I tried again and I got a lock in under 30 seconds..
Not to insult your intelligence by any means. BUT, are you outside in the open?? Because once you have set those settings that everyone here has asked you to do. It should work.
Here is what I did.
Change the stock radio. I believe this to be the main culprit. 1.12 works good. then set your standard GPS settings to Baud 96**** and to COM 4. Run GPS test in the open, outside.
It should work. I sometimes mess around with the AGPS settings. I mainly leave it off because I honestly have no idea what it is.
I get a lock in under 1 - 2 minutes every time. However, I am having a problem with the speed of the GPS. I use TomTom 6 and sometimes my triangle cursor wiggles oscillating from left to right. I don't know why. and also sometimes it is delayed.
I have yet to find a fix for this, I would be glad if someone can please help. I'm not sure if this is a video problem or a GPS problem.
Click to expand...
Click to collapse
TomTom7 also isnt working perfectly for me. It seems to be about 3-5 seconds too slow. It shows me at the street after I have already passed it. I made the registry setting changes that were posted earlier and will test the lag this afternoon ( it may be the Polling Interval being set to 1000 vs 100 i hope. I will report back to say if it has helped
Hey dudes,
im sure many of you already know this, but i figured id post it for those who may not be aware of this possible fix.
for the last few days ive been playing around with igo8 on my HD2, and i have been a little disappointed with the way this program performs. i have had lots of trouble getting a GPS lock, and frequently getting the "gps receiver cannot be found", message while trying to detect the devices GPS.
i think i may have a solution for any of you experiencing the same issue.
my solutions is to disable AGPS, in the HTC's Locations seetings menu.
after doing this, i have had great success getting a GPS lock - even indoors.
hope this helps a few of you.
cheers.
------------EDIT-------------
ps: i also have my GPS settings (in igo8) set to Port 4, with a Baut Rate of 38400.
i get a GPS fix within half a second of opening the igo8 map screen.
good luck.
no problem man. i figured id just make a post for those who may have been searching (or googleing) for "igo8" or "gps receiver cannot be found" rather than the specific "AGPS" setting. i spent quite a bit of time searching for everything excpet AGPS... seeing as though i had no idea AGPS was the cause of my problem.
so i thought i make the post for peeps in my situation, and also just to confirm that this AGPS thing might be an actual fix.
thanks for the reply dude.
ps: i dont mean my reply to sound like an A-hole, just wording it as simple as i can.
cheers.
[email protected] said:
my solutions is to disable AGPS, in the HTC's Locations seetings menu.
Click to expand...
Click to collapse
Hello
can't find disable AGPS, in the HTC's Locations seetings menu
using miri 6.5.X V6
can you explain more or screen shot
hey mate. just gotta go to htc settings screen > location > then hit the on/off switch on the right. check the screen shot.
The agps part is missing on my 1.66 wwe rom. Is there something I am missing?
not too sure mate. if its a custom ROM, the ROM chef may have removed the AGPS feature. otherwise its possible your ROM simply does not contain the AGPS service.
if you cannot see it, and your ROM does not have it... then it shouldnt be causing any problems. are you having difficulty with your SatNav program?
I also don't have that setting in my official htc 1.66 NLD rom. Is there any other way to disable it? I kind of am curious if it improves my iGO8. Although I don't really have a problem. Only sometimes it takes a minute or two to get a fix.
Port Issue
Hi all,
i have an issue in finding the GPS signal as when i go the customize the external GPS under settings i assign the COM2 under Programs and the port to COM9 with Baud Rate 4800 and under access clicked the Manage GPS Automatically, then when i press on ok and go to get the GPS signal on iGO it cannot be located ...
i go back to external and found that the port is NONE...put it back to COM9 click OK and check it back ...it turns to NONE............installed new official ROM, cooked ROMs, other radios and even other GPS like Route66 and navigon but always the same problem cant get the GPS signal.......
any help
Cobrav... in your "external gps" settings, try set your GPS program port to COM4, the hardware i believe is irrelevant, because you are not plugging an external GPS device in (so set your GPS hardware port to 'none), and have 'manage GPS automatically' checked in the access tab. this is how i have my device set (having igo8 set to the port and baud rate from the first post), and with AGPS disabled... igo works like a charm. let me know if you have any further problems.
Cenobite_ & Agoattamer... not too sure why the AGPS service is not visable or present in your ROM. but if your not experiencing any crippleing problems with your SatNav apps... i wouldnt worry about it. the problem i was having with igo8 before disabling AGPS was making igo8 almost unuseable. one thing you can try though... in a file explorer, navigate to your devices windows folder (having all show hidden files settings checked) look for a .EXE file called AGPSSettings.exe. if this exists, run this .EXE and disable the AGPS setting. if this .EXE does not exist, its probably pretty safe to assume that there is no AGPS service on your phone, hence it will not cause any issues for you.
[email protected] said:
hey mate. just gotta go to htc settings screen > location > then hit the on/off switch on the right. check the screen shot.
Click to expand...
Click to collapse
thank you,
don't have this setting in miri 6.5.X rom
any way I turn around this issue by launch OZI and after GPS locked I close OZI and launch IGO
Actually I have no issue connecting with iGO8. Just curious why the setting wasn't there in my official 1.66 rom. Phone is labeled as having agps but not one setting for it. So I don't know if it is off or on. Now I don't live in a big city but it would be nice to be able to enable it if entering a big city with many tall buildings.
What rom do you have, that you have this setting?
im using the stock Telstra ROM - 1.49.841.1 (71528) WWE.
so it seems my ROM is older than yours.
Thanks. I actually have a T9193. HTC must have felt the need to do away with that setting for some reason.
agreed. i also have the T9193, but it seems theyve omitted the AGPS setting/feature in the more recent ROMs. good call HTC.