Well I have the MMS client in my build....
And if I load the T-Mobile GPRS/MMS setting CAB, it works.
However, I can't manage to MANUALLY configure it.
Every time I try to do a "send/receive" after setting it up I get an instant error, which implies that whatever the client is looking for in the connections, its not finding it.
Anyone manage to get this to work with manual configuration? I don't want to use the T-Mo CAB because it "hides" the connection profiles, which sucks bananas, and it also breaks connections when plugged into ActiveSync.
I am a long time reader newer poster. I am coming from a Treo 750. Is there anything I should do to this before I start adding my apps and transfering contacts? Is there a better backup of my Treo other than the Windows Vista Sync? I am mainly concerned with contacts and software. Also I am on Att I heard about the only thing I need to do is swap Sim card out, also should I adjust the wap settings for this to work. [email protected] password CINGULAR1. Also does it matter when syning new device the device name be the same? What is the best ROM I should have?
ATT
I also use att and all i have to do is set up the network to use media net and tell it under advanced to not use the proxy. It should work fine for you then. I am using Bepe rom 6.3 premium. The connection wizzard sets up right for ATT in the us except fothe proxy. you do npot have to enterthe wap settings they are there already.
Coming from my 750, I didn't have to do a thing - just stick in sim card and I was good to go. I am on the PDAConnect plan so no issues with proxies and such.
As for backup, use Sprite. It comes with the Cruise on the CD.
Thanks I will do that. I should have it in my hands tomorrow morning.
mpf54 said:
I also use att and all i have to do is set up the network to use media net and tell it under advanced to not use the proxy. It should work fine for you then. I am using Bepe rom 6.3 premium. The connection wizzard sets up right for ATT in the us except fothe proxy. you do npot have to enterthe wap settings they are there already.
Click to expand...
Click to collapse
I got my phone installed bepe rom premium, I thought I got all of the att settings correct I am able to receive sms and email but for some reason It only has edge when before the rom i was getting hsdpa and 3g speeds. can you please take me through a small tutorial of what excat settings I need in the connections panel. I have only 1 listed MEdiaNet I then went to the advanced network and it says: turn on HSDPA it is checked, GPRS PAP authentication is checked, CSD Line Type data rate 9600 bps(v.32) connection element Transparent, SMS Service SMS over GSM. What else do I need to do? Please help
Also under comm manager it shows no data connection available?????
I figured it out. I removed all settings and went through the connection wizard. Also I forgot to change the band type to auto, that is why I would only get edge speeds. I wasnt sure about the proxy settings, I was supposed to checkit not uncheck it. and found the server settings and port numbers. Thak for everything. This phone is so much better than the treo 750. Well worth the money. No more square screen for me.
Out of curiosity what do we need to set the proxy to? Is this for using tethering or something else? I am on ATT as well and the auto network configure app thing seems to have set it all up correctly. Is there anything additional to be done?
Hello everyone,
Got my Touch Pro yesterday, first impressions were good but I just realised that there is no way to get my exchange to sync through 3G (or even GPRS).
I'm with 1and1, my parameters are fine (they work on my Vario III with the same SIM card). I'm with T-mobile (I know the 3G reception is not good on the TP, I had to switch to 2G to avoid getting cut off during a call, but I get 4 bars from my desk in a loft, so that shouldn't be a problem!).
I tried the default t-mobile parameters setup by the touch, and I tried to configure the connection manually with the parameters that work well with my Vario III:
APN: general.t-mobile.uk
User name: user or nothing (instead of T-mobile)
Password: pass or nothing
Still a no go. I get the same error message:
Activesync cannot reach the server. Check that the server address and proxy server settings are correct.
Support code: 0x80072F78
I've called 1and1 and they say they support WinMo6.1.
Anyone with T-mobile able to sync an exchange account on 3G/GPRS?
Would you mind sharing parameters?
I could live with the Touch Pro with 2G until they release a better rom/radio, but I can't live without push email/exchange!
By the way, there is no problem with the server itself or the exchange parameters, it synchronizes fine on wifi, so it looks like it's a touch pro (works on Vario III), winmo6.1 (works on Winmo 6.0) or t-mobile (works on wifi) issue!
Thanks for your help!
PS: before you ask, I did a hard reset to make sure there is no problem with third party software, this is after a hard reset...
Manni01 said:
Hello everyone,
Got my Touch Pro yesterday, first impressions were good but I just realised that there is no way to get my exchange to sync through 3G (or even GPRS).
I'm with 1and1, my parameters are fine (they work on my Vario III with the same SIM card). I'm with T-mobile (I know the 3G reception is not good on the TP, I had to switch to 2G to avoid getting cut off during a call, but I get 4 bars from my desk in a loft, so that shouldn't be a problem!).
I tried the default t-mobile parameters setup by the touch, and I tried to configure the connection manually with the parameters that work well with my Vario III:
APN: general.t-mobile.uk
User name: user or nothing (instead of T-mobile)
Password: pass or nothing
Still a no go. I get the same error message:
Activesync cannot reach the server. Check that the server address and proxy server settings are correct.
Support code: 0x80072F78
I've called 1and1 and they say they support WinMo6.1.
Anyone with T-mobile able to sync an exchange account on 3G/GPRS?
Would you mind sharing parameters?
I could live with the Touch Pro with 2G until they release a better rom/radio, but I can't live without push email/exchange!
By the way, there is no problem with the server itself or the exchange parameters, it synchronizes fine on wifi, so it looks like it's a touch pro (works on Vario III), winmo6.1 (works on Winmo 6.0) or t-mobile (works on wifi) issue!
Thanks for your help!
Click to expand...
Click to collapse
Use the settings the connection manager applies automatically....untick the proxy server and you should be good to go, i also am on tmobile UK, same settings and use an exchange server. The proxy has been messing which alot of stuff recently, im sure theyve changed something on it since this happened on my Hermes aswell.
Perhaps flash the newer radio onto your Raph....update to HardSPL first then flash Radio 1.02.25.31 to your device from the wiki pages. Read everything to the letter and ul be fine.
mrvanx said:
Use the settings the connection manager applies automatically....untick the proxy server and you should be good to go, i also am on tmobile UK, same settings and use an exchange server. The proxy has been messing which alot of stuff recently, im sure theyve changed something on it since this happened on my Hermes aswell.
Perhaps flash the newer radio onto your Raph....update to HardSPL first then flash Radio 1.02.25.31 to your device from the wiki pages. Read everything to the letter and ul be fine.
Click to expand...
Click to collapse
Thank you, that was quick and efficient! Unticking the proxy did the trick (even with the manual parameters).
Manni01 said:
Thank you, that was quick and efficient! Unticking the proxy did the trick (even with the manual parameters).
Click to expand...
Click to collapse
yer its a weird problem tbh. Have you used the HSPA connection for a laptop/pc yet? fast as hell.
mrvanx said:
yer its a weird problem tbh. Have you used the HSPA connection for a laptop/pc yet? fast as hell.
Click to expand...
Click to collapse
Not yet, trying to get the basics to work first. Used to do this with my Vario III (BT PAN) and was very happy with it. I'm hoping it will be faster with the TP.
Forgive me if I'm being think, but the radio you mentionned is listed as coming form Cingular in the wiki. Will it work with UK T-mob, and will it improve the 3G reception issue?
Manni01 said:
Not yet, trying to get the basics to work first. Used to do this with my Vario III (BT PAN) and was very happy with it. I'm hoping it will be faster with the TP.
Forgive me if I'm being think, but the radio you mentionned is listed as coming form Cingular in the wiki. Will it work with UK T-mob, and will it improve the 3G reception issue?
Click to expand...
Click to collapse
Ive had some improvment with the reception yes, calls dont seem to drop as much, it works fine with tmobile.
it is possible.
Hi, I got a pro, use it on the dutch tmob netwerk, both G and H work fine with the (free) mail2web exchange service.
t-mobile uses standard proxy to bring webpages faster .. unfortionatly it doesnt map all other ports so youtube and such wont work either.. it keeps trying to connect when one plays a video. since it is not neccesary to have a proxyserver it is best practice to turn it off.
mrvanx said:
yer its a weird problem tbh. Have you used the HSPA connection for a laptop/pc yet? fast as hell.
Click to expand...
Click to collapse
Hi MrVanx!
I've tried to setup my BT Pan as usual with my Vaio TZ11, and although the pairing and setup goes fine, when I try to connect I get a "connection is denied" error. Does the BT PAN work out of the box on the TP or do you need a tweak like on the Kaiser?
Sorry I'm afraid this was a "RTFM" case...
As the internet sharing option has disappeared from the comm manager, I assumed the connection was automatic...
Of course you need to launch internet sharing and select BT PAN...
It works great, I get 400-500kbps down and 300-400kbps down, 130-140ms ping. Far from my home broadband, but still good enough.
I tried with my Vario III, I get about the same results (with 3 bars on HSDPA on Kaiser, 4 on TP).
So two questions now:
1) Do you get better performance with T-Mobile UK on the Touch Pro (I'm in Salisbury)
2) Any way to bring Internet Sharing back to comm manager?
This worked for me
Man I wasted 30mins - had already read this post before I ordered and forgotten. XDA dev is the best!
My Cingular 8525 (HTC Hermes w/o front-facing camera) running WM6 on a stock Cingular ROM isn't enabling the built-in SIP functions in WM6 correctly. I filled out the _setup.xml as per the "SIP calling in WM6" guide, packaged it into a CAB using CabArc, installed it on the device, and did a soft reset. When I did so, I got "Internet Calling: Service Blocked" on my Today screen. So, After trying again a number of times (making sure to delete Prov0SIPSettings between tries), I got the same message half of the time, and "Internet Calling: Available" the other half. I'm still unable to make SIP calls. I tried with the _setup.xml my brother used to [successfully] enable VoIP on his AT&T Tilt (HTC Kaiser w/o front-facing camera) running WM6, but to no avail. I'd like to not use a 3rd-party SIP client (the phone's got barely any RAM). Is there something I'm doing wrong? Does the 8525/Hermes have known problems with WM6 and the SIP functions?
EDIT: Apparently I inadvertently used the wrong access password for SIP Sorcery. Sorry for sounding so stupid.
PS: Here's my _setup.xml. I've removed the password. It was supposed to connect to the SIP Sorcery SIP provider to provide Google Voice connectivity (the phone doesn't have a SIM or cellular service, and is running solely off of Wi-fi).
Hello,
I have installled and run COnnection setup on my phone to configure MMS and wap. However under Vodafone there are two apns for internet (wap.omnitel and web.omnitel).
Since with my old Nokia the APN for internet was defaulted to Web and when I connect to that i spend 1.00€ while with Wap I spend 0.30€ is there any way to see which registry keys connection setup sets for the APNs so I could edit them to point to wap.omnitel instead of web.omnitel?
Thanks for your advice.