I supercid my qtek8310 and upgraded to the aku2 rom ..worked for a day..then it crashed .tried to reinstall the rom again and somehow ended up installing the imate rom erroneously..then the phone showed me a green screen..tried hard reset ..everything ..and nothing works ..finally the phone just does not come on or boot up.. is it dead ? what can i do next ? :evil:
Hi,
By mistake I put a custom ROM for KJAM on my S200...This ROM is used before u start unlocking CID. The ROM went ok in the setup, and then it reset the device.
After that I could not even see anything, as the screen was black, with some white light flashing...& and the power, bluetooth LEDs kept flashing with black screen.
I tried to get into the bootloader mode, but no way...it gives the same black screen with blinking LEDs....
Please Help
Hi fellas, I have a I-mate Jamin (Prophet) G4
While upgrading to RUU_Prophet_220734_22-7114_024721_NVID.exe, I lost ActiveSync synchronisation. This was while it was copying the extended ROM. Now when I did the hard reset, it only shows the Qtek splash screen and doesn't do anything else. Is there any way to rescue the XDA?
Thanks!
hi...
i faced the same problem before
you need to go to bootloaded mode (press camera button and soft reset)
you will get tri colour screen...
Flash again....
it will get stuck at 85% but wait for the 100% completion.
restart...
Does somebody could help me solve this problem?
My HTC S710 sometimes when you restart the device or power off and on, it prompt a message searching for sdcard and then goes to the 3 color bars and stay there stuck! After many time power on and off the device i'm fortunated to get it back to start up normally and entering the os.
I did already:
Take out the sd card and reseting the device and no luck
Take out the sim card and reseting the device and no luck
Flashing the rom with original HTC rom and the new HTC Rom update and still encounter the same problem when reseting the device.
Flashing the rom with Dr. Martin Gonzo's WM6.1 ROM, 6.1 rom works like a charm but still encounter problem with bootloader.
Is there somehow to change to bootloader string to only look in the device to boot up?
Hello
after installing magldr 1.12 (wanted to try win7) my htc hd2 is stuck on white screen with htc logo. I saw simmilar posts how to solve this problem but holding down volume key and pressing turn on button doesnt boot into four colour screen it is still white screen with green logo
1.66 rom eastern europe was installed and 2.08hspl, however I didnt install any radio How to get back to rom
Thank you in advance
any solution to this problem?? i am having same issue. thnx
Can you post step-by-step what you did?
Did You make task29 before magldr?
White screen after magldr 112 - help !
titjukaz said:
hello
after installing magldr 1.12 (wanted to try win7) my htc hd2 is stuck on white screen with htc logo. I saw simmilar posts how to solve this problem but holding down volume key and pressing turn on button doesnt boot into four colour screen it is still white screen with green logo
1.66 rom eastern europe was installed and 2.08hspl, however i didnt install any radio how to get back to rom
thank you in advance
Click to expand...
Click to collapse
hello
i have the same problem !
have you found the solution ?
Please , answer me ....
Thanks
alessanro - venice - italy
same problem here please help
After flashing Magldr the Phone Reboots but gets stuck at the Splash Screen
You most probably have an older incompatable Radio on your phone. The Radio needs to be at LEAST 2.08.50 and the .50 is very important as it means the Radio is 576 RAM compatable (as stated in post1). The Radio I recommend is 2.15.50.14 and you can download it *HERE*. Boot your phone into the Bootloader Screen and flash a newer Radio and everything should be fine
White screen of death
I have the same problem.
Installed:
* HardSPL 3.00
* Radio 2.15.50.14
* MAGLDR 1.13 - here I got the same problem as all in this thread: white screen with HTC logo after reboot hanging forever. MAGLDR doesn't load by switching off, pressing and holding volume down and power buttons.
Any solution to this?
Wow! Got MAGLDR installed finally… after several cycles of different installations.
Here is what I found:
My original SPL was 3.00-0000, so previously I tried installing 3.00-HSPL. That didn’t work.
Now I installed exactly 2.08-HSPL version and here we go – I see MAGLDR menu now!
Good luck everyone! I hope this will help others with the same problem. I think we all need to read carefully (about 2.08) )))