Hi,
By mistake I put a custom ROM for KJAM on my S200...This ROM is used before u start unlocking CID. The ROM went ok in the setup, and then it reset the device.
After that I could not even see anything, as the screen was black, with some white light flashing...& and the power, bluetooth LEDs kept flashing with black screen.
I tried to get into the bootloader mode, but no way...it gives the same black screen with blinking LEDs....
Please Help
Related
I accidently flashed a wizard rom into my G4 prophet.
THought this can work or at least should abort but it didnt....
now the bootloader appears for 1 second ( the screen with the 3 colors) then immideatly turns off by itself. this happens all the time on off. the battery is charged so its not caused of the battery. is there any way to fix the bootloader ? the device restarts before the phone is recognized as usb. No update possbile by usb at this time.
alphazero said:
I accidently flashed a wizard rom into my G4 prophet.
THought this can work or at least should abort but it didnt....
now the bootloader appears for 1 second ( the screen with the 3 colors) then immideatly turns off by itself. this happens all the time on off. the battery is charged so its not caused of the battery. is there any way to fix the bootloader ? the device restarts before the phone is recognized as usb. No update possbile by usb at this time.
Click to expand...
Click to collapse
your phone is a G3?
g4
no its a g4 it turns on 1 second then bluetooth blue and orange led flashing 1 time then turns off
Jesteeeeeeeer =)
okay i put jesters g3 image to my sdcard now it asks me if i want to boot from sdcard. if i press yes it says:
No update allowed!
JEEEEEEEEEEESTEEEEEEEEER would a g4 image fix my problem ?
could any1 of u guys host or upload a g4 image of a prophet please.
you got a cid lock I guess you have to wait for the gold card project to work.
Stuck @ splash screen
I have the G3 version, I'm stuck at the Splash screen that displays the OS, GSM, etc version with the Qtek logo. Can any one provide assistance on hoe to het to the actual 3 color page (bootscreen) to reload the OS. PDAMobiz used to provided the page for the solution but since has been removed on the steps to get past this. PLase help
I have the same problem - screen is stuck at boot-screen and does not go any further... any way to load a new ROM from an SD card?
I have a Qtek S200 and have been using the Prophet_Orange_UK_Rom. I decided this morning to revery back to my initial upgrade PDAMobiz_Prophet_WM6_V1.00 Rom. However in the middle of the update process in step 2, something happened which caused the update to fail.
No my qtek starts and gets stuck on the boot screen where you see the orange logo and IPL, SPL etc... info. When I plug the usb cable, there's no message from my computer (and no ack from activesync) but the power led shows it's charging. Any ideas as to what I can do? I've tried hardware reset several times and after saying Format is completed!, I end up with the same stuck-up boot screen.
Thanks for your big help!
done it
sorry for the bother. Was doing hardware reset with both cam and comm buttons pressed. Did not know about boot reset with comm button only...
hi, may i know what you did after you went to bootloader?
my dopod 818pro just struck at the three color screen.
pls help.
I read Wiki, reflashed ROM. Now ok.
Hi fellas, I have a I-mate Jamin (Prophet) G4
While upgrading to RUU_Prophet_220734_22-7114_024721_NVID.exe, I lost ActiveSync synchronisation. This was while it was copying the extended ROM. Now when I did the hard reset, it only shows the Qtek splash screen and doesn't do anything else. Is there any way to rescue the XDA?
Thanks!
hi...
i faced the same problem before
you need to go to bootloaded mode (press camera button and soft reset)
you will get tri colour screen...
Flash again....
it will get stuck at 85% but wait for the 100% completion.
restart...
After 4 months of fully perfect use my kaiser stuck on a blue, red , green and white screen and isn't able to perform a boot. I tried to do a hard reset and it has worked until I restart it. Then the 4 color screen reappeared. What shall I do? thanks in advance.
that screen is called the bootloader and it is very unusual for a kaiser to get stuck on bootloader by itself.
where u trying to flash a rom/radio to ur device??
also what info does it display on bootloader?
Hello
after installing magldr 1.12 (wanted to try win7) my htc hd2 is stuck on white screen with htc logo. I saw simmilar posts how to solve this problem but holding down volume key and pressing turn on button doesnt boot into four colour screen it is still white screen with green logo
1.66 rom eastern europe was installed and 2.08hspl, however I didnt install any radio How to get back to rom
Thank you in advance
any solution to this problem?? i am having same issue. thnx
Can you post step-by-step what you did?
Did You make task29 before magldr?
White screen after magldr 112 - help !
titjukaz said:
hello
after installing magldr 1.12 (wanted to try win7) my htc hd2 is stuck on white screen with htc logo. I saw simmilar posts how to solve this problem but holding down volume key and pressing turn on button doesnt boot into four colour screen it is still white screen with green logo
1.66 rom eastern europe was installed and 2.08hspl, however i didnt install any radio how to get back to rom
thank you in advance
Click to expand...
Click to collapse
hello
i have the same problem !
have you found the solution ?
Please , answer me ....
Thanks
alessanro - venice - italy
same problem here please help
After flashing Magldr the Phone Reboots but gets stuck at the Splash Screen
You most probably have an older incompatable Radio on your phone. The Radio needs to be at LEAST 2.08.50 and the .50 is very important as it means the Radio is 576 RAM compatable (as stated in post1). The Radio I recommend is 2.15.50.14 and you can download it *HERE*. Boot your phone into the Bootloader Screen and flash a newer Radio and everything should be fine
White screen of death
I have the same problem.
Installed:
* HardSPL 3.00
* Radio 2.15.50.14
* MAGLDR 1.13 - here I got the same problem as all in this thread: white screen with HTC logo after reboot hanging forever. MAGLDR doesn't load by switching off, pressing and holding volume down and power buttons.
Any solution to this?
Wow! Got MAGLDR installed finally… after several cycles of different installations.
Here is what I found:
My original SPL was 3.00-0000, so previously I tried installing 3.00-HSPL. That didn’t work.
Now I installed exactly 2.08-HSPL version and here we go – I see MAGLDR menu now!
Good luck everyone! I hope this will help others with the same problem. I think we all need to read carefully (about 2.08) )))