Database Info

File System Tweak

After try and error for few days finally i've managed to use my storage card as default "my documents" and big storage as program files folder...

nonentity said:
After try and error for few days finally i've managed to use my storage card as default "my documents" and big storage as program files folder...
Click to expand...
Click to collapse
Would you mind saving us a few days of trial and error and tell us what registry changes you made? It sure sounds like an interesting hack...

"After literally an hour's ceaseless searching", I have discovered the "hidden art of turning base things into gold". :wink:
V

here u go... just finished writing the directions...
hope it helps...

Great idea and work. Do you think it will have an effect with Tomtom Navigator 5 since map files are installed in the root folder of the SD card and not in a sub-folder (i.e. My Documents)?

this tweak allows u to use external storage as local storage. it depends on whether u set ur "storage card" or "storage" to program files folder it will be the default installation path...
now all my programs r in the program files folder A.K.A. "Storage" even for those programs that needed to be installed in the main memory like SBP, anti virus etc...
i dun have to worry about my main memory anymore cos this has free up sufficient space for it...

Thanks man. I'm scheduled to do a hard reset on my unit and make a fresh install since my unit has been acting a bit strange lately.

there are 25 downloads on my doc but not a single comment...

This will work very well for "Storage=Program Files" but I think the OS will make a new "My Documents" as soon as you pull out your Storage Card ... (especially if there is an app trying to use that folder)
But I'm using it for the Program Files method.... I think its pretty clever

amazingly it did not change... even if u change another sd card it will still remain as my documents...

i've tested on "my documents" when i took out my sd card, "my documents" folder simply disappears. when i save a note etc, there will be a temp "my documents" folder appear. but this folder can be deleted at anytime before reinserting ur sd card and the original "my documents" folder reappears resuming its place... it'll be fine to change sd cards as all sd cards will be recognize as "my documents"

Test Crash
Yesterday i did some test crash on the system to find out the vunerabilities of it anyway, here's the results...
1) can't survive default factory settings (power + reset) obviously... :roll:
2) forgotten all abt "Windows Media Player" folder and "Connections" folder residing at the original "Program Files" folder by default so before u delete the original "Program Files" folder, make sure that u cut and paste both folders to storage (new "Program Files" folder) i've uploaded "Windows Media Player" folders just in case it's too late... as for the "Connections" folder, it appears to be empty. so i gues its ok... :wink:
3) system only fails (storage = My Documents2, new "My Documents" folder on main memory) when caller ID is installed. this can be restored by taking out your SD card, wait till "My Documents2" folder disappeared, delete new "My Documents" folder and reinserting SD card. but u will have to repeat this process everytime u restart ur system, :twisted: unless caller ID has been removed.
4) Installation of Acrosoft MMS cab will have the same problem as above... but it is not permenant like caller ID. just use the method above once and it'll stay that way for good...
that's the only software conflict i have experienced. other than that, my magician kick ass...
:idea: the purpose of this tweak is to let everyone utilize the storage spaces completely, minimizing the usage of the main memory so that it'll have better performance... turning ur BigStorage into "Default Installation Path", ur SD Card into "Default Documents Storage"... nothing goes to waste...
Structure of this system:
System Files: Main Memory
Program Files: Ext-ROM 18.96mb + Storage 7.6mb= BigStorage 26.56mb to 26.72mb
My Documents: SD Memory

any feedbacks? comments? anything? anyone? :?

nonentity said:
any feedbacks? comments? anything? anyone? :?
Click to expand...
Click to collapse
thx my friend, i'm going to check it and let you know if it was successful.

thanks sherko...
anyway, i've found out a way to speed up PPC even more after you are done with the file system tweak...
alternaltively you can MemMaid to do this, but there are limitations using MemMaid, that is some programs will not work if you move certain .dll
1) copy the entire AppMgr folder from \Windows\ to the new \Program Files\ dir (ex. \Program Files\AppMgr\)
2) use your preferred registry editor to search for \Windows\AppMgr and change all results to \Program Files\AppMgr\XXXX.dll
Reboot your system...
3) use explorer to delete \Windows\AppMgr and that's it...
you'll find that your system will responds faster than it used to be... thanks to the new file system, your PPC recognizes all your external storage as local storage (as in Main Memory)...

hi all , i have done all and working fine. The only problem i get is when i try and sync my outlook with outlook 2003 and i get error on pocket pc
Error : Could not create the voice link recording directory.
I do not have any software on it yet on bigstorerom, only Resco Explorer
any help would be good
Thanks
Brian

hi Brian
ok... i'm not sure if this is the case, i believe that your prior note option save to storage card / My documents. by now your system recognize your storage card as main memory...
so, go to your note > tools > option
change to Save to Main Memory....
as for your outlook, shouldn't have any problem unless you are synchronizing with your notes and the option setting above may just solve everything...
if it works, that means someone's not paying attention on my notes...
keep me update on the results....
cheers...

ok... now i know your problem...
i never noticed it as i don't really uses the voice recording... i'm getting the error when i tap on new in the notes sections...
let me know if u have the same problem...
now i'm working on it... i'll post it once i've rectify the problems... btw, if you happen to solve it before i do, pls share it with us...
thanks...

hmmm...It doesn't works for me....
I've done the tweak, and when I push the contatcts button, my Magician says: "Error opening the shortcut or locating the target filemane"
I've copied all my folders in my Documents, but there wasn't UAContents in there (I've done filetweak after a hard reset).
Any Idea...?

HyperMalac said:
hmmm...It doesn't works for me....
I've done the tweak, and when I push the contatcts button, my Magician says: "Error opening the shortcut or locating the target filemane"
I've copied all my folders in my Documents, but there wasn't UAContents in there (I've done filetweak after a hard reset).
Any Idea...?
Click to expand...
Click to collapse
have you reinstall the cab files u wanted like acrosoft MMS? these r the customized tool from ExtROM... since you did not copy the uacontent, i suggest that u try to reinstall it back...

Bluetooth OBEX PUSH - Change default location

Hello,
I have a MDA Wizard and have been trying to change the default location of the files transferred to the storage card with no success. I changed the BaseDir value in the registry, but it does not work. Any help will be greatly appreciated.
Thanks

yea me too, im looking for a solution. changed BaseDir and even change the My Documents path to Storage Card. Nothing so far. anyone know?

New location for files received by bluetooth
I came accross this program in this forum somewhere. Really good. Give it a try.
Just run the cab file and soft reset. After that, run the program whenever you want to switch bluetooth on and it puts a bluetooth icon on the system tray. double click icon and go to settings and set the dir where you want to receive the file and you're ready to go.
I've tried getting a really big file too just to see if this merely moves the file to the other location after receiving or actually changes the location of incoming files and found out it changes the location.
Let me know if this works for you.

hay damac
see thas :wink:
http://forum.xda-developers.com/viewtopic.php?t=46443
and Version 1.5 Coming Soon

Partial Success...
This is an old thread but I think is directly related to what I'm trying to do. I've seen many other threads trying to solve the same problem, so I won't create a new one. Anyway, first, here is the info:
AT&T 8525
HERM: 100
ROM: 3.62.502.3 (Offical AT&T)
Results:
Successfully transfered 2 test files from my laptop (XP SP2 Tosiba Bluetooth 4.00.22D) directly to my storage card:
AdbeRdr80_en_US.exe - 21,822,168 bytes
Tears of a Dragon.mp4 - 8,572,344 bytes
How:
Added a STRING value BaseDir to the HKLM\SOFTWARE\MICROSOFT\OBEX\{000...} set to: "/Storage Card/"
Problem / Temporary Solution:
Using Resco I can see the file in the Storage Card as soon as the beam is over, however the OBEX prompts you if you want to save the file or not. If you click NO the file gets deleted. If you click YES, the file gets moved after two seconds to \My Documents or some files just go nowhere(?). So before I actually answer the prompt, I just copy the file elsewhere on my card and then click NO on the prompt.
Analysis / Conclusions (so far):
1. The official AT&T ROM does not have OBEX FTP service installed (obexfile.dll). It only has the OBEX Default Inbox service (obexinbx.dll).
2. The obexinbx.dll is not behaving as expected. Ex: Why "/Storage Card/" vs. "\Storage card\"; Adding the DWORD value DisableUI does not eliminate the prompts as it should; If I delete the TransportAuntheticate value in the same key, it just reappears, yet the dll is not supposed to use that value as per MSDN2.
Could somebody try to duplicate my results and/or see if there is a way to disable the prompts? Thanks in advance!

Has anyone tried this? Please?
Here are some screenshots to better explain what is happening:
1. Add BaseDir value to the OBEX key.
2. Send test file from my laptop.
3. PPC displays 1st UI prompt (recfileprompt.jpg)
4. Laptop displays progress indicator for file transfer. (progress.jpg)
5. When transfer is complete, PPC display 2nd UI prompt. (uiprompt.jpg)
6. I can confirm the test file did transfer to the SD card (fileinssdcard.jpg)
7. If I click on YES the file disappears (but some files get moved to \My Documents). If I Click NO the file disappears.
So... Is there a way to get rid of these prompts? Or to make them not move or delete the file once is in the SD Card?
Thanks,

dgaud007 said:
Here are some screenshots to better explain what is happening:
1. Add BaseDir value to the OBEX key.
2. Send test file from my laptop.
3. PPC displays 1st UI prompt (recfileprompt.jpg)
4. Laptop displays progress indicator for file transfer. (progress.jpg)
5. When transfer is complete, PPC display 2nd UI prompt. (uiprompt.jpg)
6. I can confirm the test file did transfer to the SD card (fileinssdcard.jpg)
7. If I click on YES the file disappears (but some files get moved to \My Documents). If I Click NO the file disappears.
So... Is there a way to get rid of these prompts? Or to make them not move or delete the file once is in the SD Card?
Thanks,
Click to expand...
Click to collapse
Unfortunately, the contents of my HKLM\SOFTWARE\MICROSOFT\OBEX\ are the folders Services and Transport. There is no {0000-0000...} folder there. It exists though in the folder Services, so for my device, it is HKLM\SOFTWARE\MICROSOFT\OBEX\SERVICES\{0000...}. After adding the key, the temporary storage for the received file is ideed SD Card so I can grab it before responding to the prompt.
Nevertheless, either if I respond YES or NO for the file save prompt, the file is deleted from SD Card and does not reappear anywhere on the device, so it does not get moved, but deleted.
Notes:
For me it does not matter weather I write "/Storage Card/" or "\Storage Card\", it still receives to Storage Card, but regardless of what I choose, YES or NO, it deletes the file.

tnyynt said:
Unfortunately, the contents of my HKLM\SOFTWARE\MICROSOFT\OBEX\ are the folders Services and Transport. There is no {0000-0000...} folder there. It exists though in the folder Services, so for my device, it is HKLM\SOFTWARE\MICROSOFT\OBEX\SERVICES\{0000...}. After adding the key, the temporary storage for the received file is ideed SD Card so I can grab it before responding to the prompt.
Nevertheless, either if I respond YES or NO for the file save prompt, the file is deleted from SD Card and does not reappear anywhere on the device, so it does not get moved, but deleted.
Notes:
For me it does not matter weather I write "/Storage Card/" or "\Storage Card\", it still receives to Storage Card, but regardless of what I choose, YES or NO, it deletes the file.
Click to expand...
Click to collapse
Exactly. This is the best I could get it to work, by just copying or moving the file to another SD Card location (or renaming it) before responding to the prompt. Anyway, this is kind of an old post. I had orginally done this since Dr. Yar crashed on my phone. Since then, I discovered HTC Bluetooth FTP Explorer 1.2, which adds an FTP tab to your Bluetooth Connections settings, where you can specify the default location for incoming bluetooth files.
Thanks for trying it out though!
PS,
I was trying to upload HTC Bluetooth cab, but there is a problem with the database. Anyway, I got it from VP3G's AddOn pack in the Hermes forum. A quick search should find it for you.

dgaud007 said:
Exactly. This is the best I could get it to work, by just copying or moving the file to another SD Card location (or renaming it) before responding to the prompt. Anyway, this is kind of an old post. I had orginally done this since Dr. Yar crashed on my phone. Since then, I discovered HTC Bluetooth FTP Explorer 1.2, which adds an FTP tab to your Bluetooth Connections settings, where you can specify the default location for incoming bluetooth files.
Thanks for trying it out though!
PS,
I was trying to upload HTC Bluetooth cab, but there is a problem with the database. Anyway, I got it from VP3G's AddOn pack in the Hermes forum. A quick search should find it for you.
Click to expand...
Click to collapse
I don't know whether you are referring to this (which is inside my rom), but look at my settings. Even with these, Bluetooth still receives to Device and saves to Device\My Documents.

tnyynt said:
I don't know whether you are referring to this (which is inside my rom), but look at my settings. Even with these, Bluetooth still receives to Device and saves to Device\My Documents.
Click to expand...
Click to collapse
Yes. That's it. It works fine for me. Is your SD Card name "Storage Card"? I would also try using the browse button and selecting different folders inside the SD Card.

dgaud007 said:
Yes. That's it. It works fine for me. Is your SD Card name "Storage Card"? I would also try using the browse button and selecting different folders inside the SD Card.
Click to expand...
Click to collapse
Just tried. Same thing!

Well. That is strange. I don't have a Trinity. I have a Hermes. What I would do at this point, is first, try installing the BT FTP cab over your existing one (backup first!). If that doesn't work, try removing/re-inserting the SD Card and also if possible another SD Card. Could there be a write access-protect restriction on your card that forces the OS to use the default My Documents location?
Anyway I have to go back now to my other life , but if I think of something else I'll let you know. Sorry you have problems

OBEX vs FTP
That bluetooth setting is only for FTP transfers. OBEX is the "native" transfer protocol that phones et al. use. Changing the setting for FTP received files doesn't alter the OBEX ones!
I'm going to try Dr Yar, but would love to find a registry setting for this!

I've just found this one as a cure, about to try it..
http://www.freewarepocketpc.net/ppc-download-obexinboxex.html

Just Got My Htc Vox.. Few Questions Plz Help

#1 With this push email business, can someone explain to me how that exactly works ... apparantly it is free ????
#2 With the box I got it said there is supposed to be a Pouch included in the box but there wasnt. Did anyone else get a pouch?
#3 When I go into contact ... I cant seem to find a way to sort the Phone Contacts from the SIM Contacts... is there anyway to "hide" the SIM contacts?

htc - s710
re pouch none in the box
push email is somtihng you need to set up via your office or work server like exchange or you can sign up to some company who does it for you but you need maybe to install some kind of software i use www.emoze.com very gd soltion
re contact no idea
enjoy

re SIM contacts
I seem to recall there being something in the "Expert" folder in the start menu. I did have three icons there but i accidently removed one and I am not going to reset my phone to put it back - but you could have a look.
GTAfinest said:
#1 With this push email business, can someone explain to me how that exactly works ... apparantly it is free ????
#2 With the box I got it said there is supposed to be a Pouch included in the box but there wasnt. Did anyone else get a pouch?
#3 When I go into contact ... I cant seem to find a way to sort the Phone Contacts from the SIM Contacts... is there anyway to "hide" the SIM contacts?
Click to expand...
Click to collapse

#2 With the box I got it said there is supposed to be a Pouch included in the box but there wasnt. Did anyone else get a pouch?
Click to expand...
Click to collapse
I asked my vendor about that and they said it's an error in the manual, no pouch..
rgards
Björn

Hiding Sim-Contacts
Hello
I try to translate from my German Vox.
First you go to the settings.
Select the telefonsettings.
Tene select Callingoptions or Calloptions ( German : Anrufotionen )
There you can see "show Sim-Contacts".
I hope in Eu-Versions it is the same and my english is not tooooo bad.

THANK YOU!
IT WORKED!!!!!
Now can you solve the solution why this thing LAGS and is SO SLOW?!?!
I dont know if comming from a tytn makes it seem like this, but to me this device it wayyyyy tooooo slowwww

the CPU is hardly worthy of WM6
use Omapclock and speed it up
i run 252mhz and it's more than enough for me

im tryin to do that now but it doesnt seem to work on resume!
i installed omap clock plus as well.... whenever the phone comes out of hibernate, the clock is set back to origional speed.
do you know how to fix this ??????
what version of omapclock are you using?

Thanks for that tip about contacts, dietmarr
BTW, i did get a pouch with my Vox!!

Regarding overclocking, JDRoss over at MoDaCo posted the below tip. Works like a charm!
Here's what you need:
omapclock application (available here)
tornado power control application (available here)
Download the CAB files for each and install like you would any application. That means copying them to your S710 via bluetooth or ActiveSync, and then running them on your phone to start the application setup process.
Now you need to link the two together. How? Well, the nature of the tornado control application is to launch files based on internal phone events. In this situation, the way to do this is to create "link" filetypes that instantiate omapclock with command line variables to set the appropriate CPU speed.
As a result, you need to create 3 link-type files (.lnk) in the same directory as the tornado application on your S710:
(the first line is the file name, and the 2nd line is exactly what I typed in notepad on my PC before saving the file as a .lnk file):
Power_On.lnk
40#"\Program Files\TornadoPowerControl\OmapClock.exe" -clock 252
Power_Backlightoff.lnk
40#"\Program Files\TornadoPowerControl\OmapClock.exe" -clock 186
Power_UserIdel.lnk
40#"\Program Files\TornadoPowerControl\OmapClock.exe" -clock 186
Once these .lnk files are saved on your PC, you can use ActiveSync or bluetooth to move the files to the \Program Files\TornadoPowerControl directory. Once there, you're almost ready to go...
You also need to create a link file type (I call the file TPC.lnk) and put it in the windows/startup folder so that Tornado Power Control loads automatically upon boot.
Here is my TPC.lnk file contents:
43#"\Program Files\load.exe" -hide "\Program Files\TornadoPowerControl\TornadoPowerControl.exe" bright hide
Note that I'm using a program called "load.exe" (available here) that I simply copied to my /program files/ folder - this is optional, but it makes TPC application run in the background and not show up in task manager (which makes the overclocking even more invisible to the user). Actually, this doesn't always work (since I sometimes see Tornado in task manager), but it's still a nice concept.
Hope this helps.
Click to expand...
Click to collapse

Direct copy of files via BT to Memory Card

Hi folks,
is there a possibility to have incoming files via BT to be copied to memory card instantly?
Currently files are first being copied to main disk on WM6 (after you agree to receive) and then you can specify where you want it saved in.
Due to lack of space, I would prefer if it is possible to override the current way and have files going to memory card instantly.
Would be happy if there is an solution?
regards
Horst

There is a BT utility called "Dr YAR" something. Sorry I can't recollect the entire name. One of it's features is it allows you to transfer files directly to the storage card. However I must inform you that in all the times I have tried it over various ROMS and devices, I have never had it successfully complete large files. It always goes through to about 50% and then hangs.
I really hope somebody can create a simple app that can cover for this one annoying aspect of WM.

Hi,
thx for the Info. i also do know of a program called "Sniper", which fulfills the job more or less as well.
But what I was wondering, if there aint a way to get files directly to the card.
regards
Horst

Waggl Daggl said:
But what I was wondering, if there aint a way to get files directly to the card.
Click to expand...
Click to collapse
Without third party software? I don't think so.

There are 2 ways a file is transfered to your
1. Information Exchange
2. File Transfer
Usually when you transfer a file from a normal non-smart phone, it sends a file using the Information Exchage, OBEX push, i think... This is used by WM mobiles for transferring Outlook files like vCard, etc. So when you recieve files from another Phone to ur WM via OBEX push, you most probably, wont have have control over where u can save the file, atleast by default firmware.
Now in the second case, Say transfering a file from a Laptop, it uses "File Transfer" to send a file. This uses a shared folder on your WM phone, and the file is transfered to your shared folder. This Shared folder is defined in the "Advance..." button of your "File Transfer" service, under the "Services" tab in Bluetooth Settings.So basically select a folder on your card to define where you recieve the files. i have transfered a fairly large file (24Mb , thats more than the free memory i have on my ROM) directly tothe card. kindly note that the files in the folder that you have decided to share will be available/ accessible to the host bt device sending the file, so its a good idea to define a new folder that for the purpose.
Hope this info was helpful

official hermes AT&T WM6 does not have FILE TRANSFER!
Hello,
I'm linking to my other posts in the thread below, since nobody has replied to that one. Anyway, the HERMES offcial AT&T ROM does not have the OBEX file transfer service, only the default Inbox service. In that case I have managed to transfer direct to the SD Card using this service, but I would like to improve the process by removing the UI prompt. Please read the other thread and let me know if you can duplicate my results and/or if there is a way to remove the prompts. Thanks,
http://forum.xda-developers.com/showthread.php?t=268697

Changin Bluetooth temp folder so we can get bigger files?

I think there is a serious problem on Winmo devices that I noticed. My friend tryed to send me a video file which was 32mb huge. I had about 57 MB internal space free so he send me the file trough bluetooth and it recieved well but after I clicked "yes" on the "do you want save the file" screen it denieds me that the storage memory is low and auto delets the file!
Is there any solution that its directly saves the incoming file on the SD kart?
Any help would be appreciated!

Use that:
OBEX Inbox

can you please explain me it a bit more please?

Do a search for moBlue, this will enable you to redirect any incoming bluetooth file to where ever you want.

Thanks for the replys!
I already found OBEX and it works perfect!
I kinda like searched a tool like this...

moBlue allows redirecting files to certain dirs depending on the file format...