Is there a setting to silence the phone on an incoming call when the phone is locked? Pressing the volume up or down WON'T work with me.
Thanks in advance.
i just tried on my phone several times from different numbers and it works fine for me.. both buttons too
Were you using any program such as manic AutoKeylock? or you just held the end call button to lock it?
Maybe I need to reset it but I didn't install any programs.
just end button i did not think i needed a program to autolock my phone
silence
Hi,
when somebody calls me i would like to silence the ringtone and not hangup. (on sonyericsson you press the side key for volume)
pressing volume up or down doesn't work for me either. is there a place in settings where you have to enable this feature? (i sure couldn't find it )
I would like to confirm that a hard reset fixed the problem! Pressing volume down while phone is locked SHOULD silence the phone by default.
Could be some software glitch that messed it up in the first place.
Figured out the problem. It seems to me that when there is an active connection, i.e EDGE is connected and it is showing in the near the cell signal, you WON'T be able to silence it by pressing a volume down.
If you go to connection manager and disconnect Edge by pressing 6, then lock it and let somebody call you, you WILL be able to silence it!
I have tried the above three times to confirm it. Seems pretty messed up if you ask me!
If you know how to solve the problem, please let me know.
Anybody figured out the problem (Read above)? I will paypal you $20 if you can get this to work!
Really, why did they mess it up like that when my previous phone, SDA, worked!
Related
Is it possible to activate the loudspeaker on my Xda before choosing a telephone number?
Dial a number. Disconnect and tap onto the signal symbol in the title bar. Tap onto the disconnect telephone button and then immediately press the green button (accept telephone call) keeping it pressed until the note appears: The loudspeaker is activated.
The telephone then disconnects without establishing a connection. The information that the loudspeaker is activated remains.
Turn on the telephone. The loudspeaker is turned on instantly with each dialled number.
thats the info in their faq section but i dont understand???? what ive been trying to do is:
dial 4444....
hit the red button and then click the signal bar at the top of the screen
tap red button then hold green button down....
just doesnt do nothing :\ anyone know how to do this?
figured it out
right.......
phone loaded up as normal
dial any number and use the stylus to tap talk on the screen
then when connected use stylus to hit end on the screen
then quickly tap the signal bar and hit turn phone off or flight mode on
then quickly hold down the green BUTTON and speaker phone will turn itself on and the phone will turn off.
then just tap the signal bars again turn the phone part backon
there you go you now have h/f mode on all the time good for when driving
gaz
Yup, it works, a real convoluted way of doing things dont you think but something I have been trying to do for ages and finally gave up. Thanks
i wouldnt call it a propper way of doing it lol id call it more of a glitch in ppc lol but at least it works but you dont get no tones from keypad numbers if you turn them on and then so softreset they come abck on but h/s mode disapears......
but guess whats in my statup folder for some strange unknown reason a shortcut to handsfree.exe i click it it doesnt seem to do nothing but its just appeared in there for no reason.
ive searched windows directory and cannot see handsfree.exe so i linked to my pc to search found it i try copy it over from the ppc to my xp pc with show all files turned on but the icon just dissapears then i try copy it over again and it says do you want to overwrite this file so its on my pc but it just dont show up :\
it would be great if i could get this h/f thing into my startup lol so it comes on when turning the phone on
gazzaman2k said:
then quickly tap the signal bar and hit turn phone off or flight mode on
then quickly hold down the green BUTTON and speaker phone will turn itself on and the phone will turn off.
then just tap the signal bars again turn the phone part backon
Click to expand...
Click to collapse
I can't believe O2 tells people to do this. Surely the effort of coding this small feature s less than the extra hassle of having your customers perform such 'dirty' workarounds.
There's some serious glitches in the support->coders communication pipeline for these devices, I tell you.
i totally agree
it would be nice if it done like......
when receiving a call and the screen pops up answer / reject
if it had aonother box option for like loudspeaker answer that would be cool
Maybe obtuse, but it works
On several occasions, I had fumbled fingered my PPC during a call and wound up with the H/S turned on semi-permanent. I never could figure out what I did. This is great info, but I agree, a nice little app would be a LOT better.
david
when u do this after turning the fone part back on hold the green button it goes off hold it again it comes back on if you tap the green button the telephone screen shows tis pretty cool but the device liek sounds low? till after the softreset
The other way round?
Having turned the XDA II off for a flight by powering down rather than putting on flight safe mode, all phone calls now are handsfree. How can I get it back to 'normal' mode?????
Driving me insane!!!
if left alone, the phone app will open itself, and it seems the hangup button is pressed over and over again 10s intervals,
if you open something else, it will close because hangup is the same as minimize or close. and it will go back to the phone application. i have disabled phone and removed the sim and it still tries and opens the phone app.
if you hold the hangup button, the phone works like it normally does. and i can make calls normally as well.
i upgraded the radio rom but did not help, im starting to think its a button board problem.
really weird but does someone have a solution to this?
I do not have auto lock turned on. I did load the VZW "clean up" cab. I can't figure out why sometime when I pick up the phone the lock is on, and other times the screen is simply turned off. I never hit lock, simply turn off screen or let it go off automatically.
Anyone have an idea?
Thanks.
Are you sure you are not hitting the top button accidentally. That button will turn off the screen.
I do use the top button. It only turns off the screen though, not locks the device. I can use it, then hit it again minutes later and the device is fine. But sometimes I'll put the phone down or aside for a while, and when I pick it up to answer a call or something I'll find it has locked itself and I have to press the soft keys.
hmm... sounds strange, I gotta go with what the 2nd guy said, I will sometimes lock the device myself (the soft key for it is on the home screen after all and it's VERY sensitive). About the screen turning off, you sure it's not just going into it's timed sleep/standby mode?
hopefully this will be of some help...i too had this problem and then i realized what the cause of MY problem was...whenever i would receive a phone call and would let it go to voicemail, when i would wake the phone back up it would be locked...i cant remember if the same thing happened when i answered the call but i know for sure it would do it when i pressed ignore call or mute ringer and let it go to voicemail...SOLUTION:i downloaded a cab called disable auto lock (or sumthing like that) and it fixed the problem...hopefully that helps..
mwrood said:
hopefully this will be of some help...i too had this problem and then i realized what the cause of MY problem was...whenever i would receive a phone call and would let it go to voicemail, when i would wake the phone back up it would be locked...i cant remember if the same thing happened when i answered the call but i know for sure it would do it when i pressed ignore call or mute ringer and let it go to voicemail...SOLUTION:i downloaded a cab called disable auto lock (or sumthing like that) and it fixed the problem...hopefully that helps..
Click to expand...
Click to collapse
I've been trying to figure this out as well and came to the same conclusion. My screen is off, I answer a call, and when I hangup my screen is locked. I did a quick google search for disable auto lock and didn't have much luck. Can you post the name of the file and where you got it? Thanks
Not sure where I found it, I think PCGeeks, but it was called Disable_Auto_device_lock.cab
HOWEVER...it did not work for me. I may have to cold reboot (from scratch) as I've tried so many different cabs, things are getting messed up. I'm trying to hold off for the ROM update.
The phone will automatically lock if you miss a call. Sometimes if you pick up on the last ring the phone will consider it a missed call and still lock the phone. That has happened on my 6700, my 6800 and now my TP2, but this is the first phone that locks after a missed call. I actually like it becuase since I dont have a S2U2 or 6.5 on the phone it prevents butt dialing if I leave my phone in my pocket or soemthing.
I have noticed the same issue. I also noticed that it did not happen before I had installed the clean up cab. I had thought that the lock button was being hit while the phone was in my pocket.
Although the "Disable auto..." didn't work for me, I down loaded and am trying S2U2. So far, and if I'm not mistake, It did not lock me after a missed call, or answering a call.
I'm going to play with it for a while. Had something similar before on my old Q9c so if it works, great!
I just hope all these friggin cabs work when I update to 6.5, or I may not! The only real pet peeve I have about the TP2 is earpiece volume. If the cab volume booster doesn't work, I won't upgdate!
I have this issue as well. It seems to lock if the person that calls me hangs up before I do. It also locks if I ignore a call. I have had it lock in the middle of a call as well. Really annoying if I need to use the onscreen keyboard to enter information during the call.
I hope someone can find a solution for this. So far, it's my only complaint about this phone.
Well, I've been using S2U2 now for a couple of days. Getting to like it! My screen no longer locks, and I kind of like the Iphone type unlock. When a call comes in 2 nice large buttons for either answer, or end (ignore).
You may want to try it.
Mine does the occasional random lock also and when it does, it wants a password that does not exist. IF anyone knows what the standard password is, please let me know. I don't have one set and need to reboot when this happens. Really my only beef with the phone which hopefully gets fixed in 6.5
I have found that if I receive an SMS the screen will come on on its own. In those circumstances I have seen it lock the screen afterwards.
I am thinking it is a failsafe put into the phone for accidental button hits after the phone wakes up from certain activity but could be in a pocket.
hi,
sorry for this lengthy message. But pls, experts look into this.
my father was having an Imate jama 201. 3 yrs ago, he kept inside since it did not work properly for him. That time i did not know what the problem was. Now i have caught hold of that.
The phone switches on properly. The welcome screen is seen. If there is no Sim card, it displays a msg. When i put a Sim card, it displays the operator name as well as the G- GPRS symbol. But when i click the start button or any key, it operates very very slowly.
In the navigation buttons i can only press the down button to go down a menu, but that too, by pressing the left key along with it. The right selection button( long rectangle near back button,) does not respond when i click it. But if the phone back light goes out, the phone responds back by coming back again to the home screen, on clicking that button.
I dont know whether this is a software or a hardware problem. The phone, very rarely is able to work without any sluggishness. I am able to view the preloaded gifs and images in the pictures menu and even go to camera mode.
I am able to receive calls and messages, but since the buttons don't respond properly, i am not able to answer them. The ring tone is loud enough to hear when i get a call.
I have no important data in it, so i am willing to flash it irrespective of any data loss, if required.
I am ready to answer any of your queries regarding this issue.
Thanks in Advance
You should try to make a hard-reset!
actually, most of the keys in it wont work properly. You just press randomly some keys in it, only a letter appears. i am able to go till the hard reset menu, but not able to enter the number: 1234
my girls volume wont turn on at all? anyone ever hear about this problem? it isn't rooted....
not sure if it will help, but try this: from the home screen, press the menu button, then choose settings>sound>volume, and check the settings for the various volumes, i.e incoming call, media, system, etc. when my phone was stock like hers, sometimes one or more of those volumes got pushed down to 0 for some reason... it was annoying, and it seemed to happen especially to my notifications volume every time i rebooted the phone! hope that helps
I'm having the exact same issue
Hey everyone. So I bought a sidekick 4g on craigslist the other day. I checked it out and thought everything was okay, but I was wrong. So far no response from the jerk who sold it to me without telling me about this problem.
The phones volume up key doesn't work 90% of the time. If I reboot the phone or leave it off for a while, the volume up key will work for a few minutes and then stop again. The funny thing is the volume up key works when I want to reboot (holding vol.up + vol.down and power button at the same time).
So is there any fix for this? Will rooting it and loading a rom fix it? Also I am new to all of this, is it even possible to root and load generginger 2.0 with a broke volume up button? The phones firmware is all up to date.
Thanks for any info and help everyone.
i'd suggest using this thread: http://forum.xda-developers.com/showthread.php?t=1275116
root the phone, and then go back to stock with the heimdall and see if that fixes the problem. and if it does then you should try rooting it again and install one of the Custom ROMs because the stock OS on this phone is garbage out of the box.
but i'm no expert either, it just seems strange that only when its been on for a bit that it stops working. that it works when you boot it seems to suggest that its a software issue? somebody help me out here guys lol