WM5Torage doesnt work ? - Tilt, TyTN II, MDA Vario III Windows Mobile ROM De

Wm5Torage not working
Anyone tried it ?

you need version 1.73

No 1.73 does not seem work either and neither does 1.75 (or Softick Card Export)

May I know if you manage to solve the problem because i'm facing the same problem. thank you

The only thing I found working is Softick Card Export II v3.05 (only this and later versions)...
I heard that after installing the above, WM5torage is known to work too, because it needs the drivers that Card Export uses...
Don't know what's treu about that...
And why instll WM5torage when you get Card Export to work?

rvdgeer said:
The only thing I found working is Softick Card Export II v3.05 (only this and later versions)...
Click to expand...
Click to collapse
I can confirm Softick will work, as good if not better than WM5torage. (except for the free part ) WM5torage won't work on the 8525 either. And as the other member stated, make sure it's 3.05 version. Any other version has bugs with WM6.

Jep, I know Softick is not free...
(It's a shame!)
But someone told something about regularly removing a reg key ro stretch the trial period...
I don't think Softick intended it to work that way...

rvdgeer said:
The only thing I found working is Softick Card Export II v3.05 (only this and later versions)...
I heard that after installing the above, WM5torage is known to work too, because it needs the drivers that Card Export uses...
Don't know what's treu about that...
And why instll WM5torage when you get Card Export to work?
Click to expand...
Click to collapse
Just because Card Export is not free...

donLee said:
Just because Card Export is not free...
Click to expand...
Click to collapse
Good one

WM5torage does work well when connecting to a Linux computer. I transfer files all day with my 8925. I get the same "card not formatted" error when I tested in XP. The author, Ingvarr, states that problem lies in the USB driver that came with the Kaiser units and that if he could fix it, he would have already.

rotohammer said:
WM5torage does work well when connecting to a Linux computer. I transfer files all day with my 8925. I get the same "card not formatted" error when I tested in XP. The author, Ingvarr, states that problem lies in the USB driver that came with the Kaiser units and that if he could fix it, he would have already.
Click to expand...
Click to collapse
Then what is Softick doing differently then? Their (commercial) application Card Export II does exactly the same as WM5Storage, but they have succesfully updated their version 3.05 to support the TytN II.

I think Card Export II uses its own proprietary USB driver. It works like a champ. An interesting thing is, now that I have Card Export II installed, WM5toarge works as well. I haven't purchased the CEII yet, but am wondering if I can find out which USB driver is installed and use it in conjunction with WM5torage.
Maybe someone here with the brain will find out.

can someone confirm, if wm5torage works when sceII's trial expired?

Ohh good question.

hope someone can check it. i have still 20days of trial comming...

How come the WM5Torage 1.78beta2 link was removed? I downloaded it from this thread. Should work but not tested yet!

hehe, working, but only when softick card export 2 is installed.. because of this i removed it.. sorry

patr!k said:
can someone confirm, if wm5torage works when sceII's trial expired?
Click to expand...
Click to collapse
WM5torage is still working after the trial of Softick Card Export II has expired.
I changed the registry key HKLM\Software\Softick\Card Export\Installation time to force an expiration.
You still need to start the Tray Client (\Program Files\Softick\Card Export II\CardExportSetup.exe) before using WM5torage, though.
Tip: set Card Export II not to start at startup and create your own shortcut in \Windows\Startup
Update: WM5Torage stops working when the trial is expired. I modified the registry so that the trayclient thought it was expired. W5Torage still worked. Now that the actual trial period is passed, also WM5torage stops working.
Helas..

What about the 1.8 version?
http://www.modaco.com/index.php?automodule=downloads&showfile=1702
Regards,
Nika.

nikagl said:
What about the 1.8 version?
http://www.modaco.com/index.php?automodule=downloads&showfile=1702
Regards,
Nika.
Click to expand...
Click to collapse
My friend says this version is working without any problems with Dutty's 6.1 19199...
I Still don't hava my kaiser with me to test...
cheers

Related

Turn your device to USB flash drive

Softick Card Export II for Pocket PC turns your Pocket PC and Windows Mobile PDA into USB flash drive.
http://www.softick.com/download.php
Holy crap, this is nice.
But trial version? Please make sure you mention things like this =]
But yeah, installed, tested great. Puts a little icon in your "System Tray" to select between "Activesync" and "Card Reader".
Works on my Magician, connecting to XPSP1 machine. Yes, it had to install drivers but the drivers were native so in about 10 seconds I had access to my SD Card.
Did a quick file transfer test - MUCH faster than Activesync.
This might save me having to carry my card reader everywhere, despite the fact that the cable doubles as my Magician charger ;D
Now check this
change your owner name to
Dcs [RCAPDA]
then see what happen
Haha, thanks, but I've already fixed that little problem ;D
No go with the latest Qtek rom.
It say's you will have to download the newest USB driver ?!?!? :shock:
I discoverd that this one is for WM2003, downloaded the one for wm2005 but won't work either.
Lets see if there is an update some day.
Cheers,
Drifter
Drifter
on the download site
http://www.softick.com/pocket-pc/cardexport2/
there are three downloads
1. ZIP Microsoft Windows Installation (English)
2. CAB package for Windows Mobile 2003 (English)
3. CAB package for Windows Mobile 2005 (English)
first one ZIP is ver 2.21
others are ver 2.11
try the zip
and they say
We are permanently developing support for the new devices. Tell us what device support do you need.
try it hope you get some luck
hay Jed D`Lagged tell me the secret
next time i will be careful to mention about trial versions
Unfortunately, it seems only to function in Read-only mode on WM2005, and quite slowly too. (at least on my himalaya)
You can make your phone a USB drive without extra software. I have read that it can be done. Havn't done it yet with my 6700, but did with my 6600 but cant remember how I did it
The WM5 one works a treat on my Universal and Wizard. Or rather,it did untill I upgraded the roms to direct push capable ones. Now I have to disable direct push and kill activesync before switching the card export to 'export' mode. Irritating but still quiet usable.
If you're worried about the trial version you could alway, er, buy it! It's cheep!
USB mass storage driver
i dont know what is this & what will it do ?
USB mass storage driver is free for personal use
http://www.deje.gmxhome.de/software.html
... wrong way around. That installs a driver that let's you plug USB thumb drives into your PocketPC.
Although... I don't know any Pocket PC devices that have a USB Slot A connection?
The Fujistu-Siemens Loox (older model) had a USB host.
Thanks
Thanks
an alternative freeware which seems to work nicely on Himas (can't speak for rest)....
http://buzzdev.net/component/option,com_simpleboard/Itemid,59/func,view/id,16355/catid,26/
Cheers - Mallow1

WM5 USB Mass storage WM5torage

Hey guys, i found this USB mass storage program WM5torage.
It seems to works with WM5 properly. Give it a try. Guess there's no need to use Softick anymore
Works perfectly with my Wizard! I mean i can see the drive. Though never tried to write to it yet. Should be working fine i guess.
http://www.modaco.com/WM5torage-t238545.html
btw... a note... you may need to reboot your system cuz it doesnt seems to work after activesync.
It's ok to post a link to another forum rite?
yup it's fine to
thanks for the link
Jip, found it through msmobiles.com - works well with my Universal!
works like a charm on my charmer... er, prophet!
Guys, how many times is this program going to be posted? Please search before engaging fingers...
V
well... i was pretty sure i was the first to post it
At my Wizard (last Qtek ROM) don't work;
Error: Cant switch to Mass Storage USB driver, error 1f
anybody know why? I disabled activesync before.
thanks
you can get updated version 1.32 from http://www.modaco.com/index.php?download=1702
regards
Same!!!
I Think is because today plug-ins SPB pocket plus ans Phonealarm, thar have shortcuts to SD card!
the New version now with read/write LED support and it works with pocket + on my Qtek9100!
No way... don't work at my wizard!

Copy to and from memory card without ActiveSync !!!

Hi guys,
I don't have a card reader, so I would like to know if I can copy files from my PC and paste them into my mini-SD, because I can't do that with ActiveSync !!
Any help would be much appreciated. Thanks
Search for a program called WM5 Storage and install that on your device. It makes the computer think it's interfacing with a SD reader so that you can copy back and forth like you can with activesync
Urthwhyte said:
Search for a program called WM5 Storage and install that on your device. It makes the computer think it's interfacing with a SD reader so that you can copy back and forth like you can with activesync
Click to expand...
Click to collapse
Thank you so much Urthwhyte !!!! Cheers to you !
AM I right in assuming that the program worked for you? Good luck with copying over with whatever it was you needed to, and a belated welcome to the forums!
Urthwhyte said:
AM I right in assuming that the program worked for you? Good luck with copying over with whatever it was you needed to, and a belated welcome to the forums!
Click to expand...
Click to collapse
Yes! But a large file ( aprox. 900MB ) gave me a redundance error. I'll try again today.
By the way, I think that this software came already bundled in the latest Ax3l ROM !!! eventhough, thanks for your kindness words and support !
----
Well... my previous comment refered working in windows XP. Unfortunately, I'm getting to even a more solid conclusion that Windows Vista is really a pain. There's a lot complicated things ( or I'm a really hass *ole ); specially in recognizing my miniSD card of P3600, the P3600 itself. I had problems installing Windows Mobile Device Center in vista too. GRRR. Even my brand new external hard drive Lacie 500GB USB 2.0 is asked to install drivers. Even if install them... every time I logon into Vista it asks for drivers... !! I'm starting being tired of Vista issues. I will make a dual boot and that's the end of story.
Sorry about this last comment. But I needed to ...

Windows mobile 6.1 Here you go...!!!! (Link updated for G3 & G4) WWE 6.1

Dear All,
I have just downloaded Windows Mobile 6.1 for universal from PDAVIET...
Here I have uploaded the link for you all...Thanks to nncoung for his efforts..
Will appreciate your response...
Here we go.....
http://rapidshare.com/files/87505731/UNIVERSAL_6.1.rar.html
Here it is the most awaited rom 6.1 from mmwang...Thanks for all his efforts (G3 & G4)
http://rapidshare.com/files/88967555/DFT.U.V1.WWE.rar
Thanks,
Abid
Posted yet...
http://forum.xda-developers.com/showthread.php?t=362278
is this g3 or g4 or both?
Hocus said:
is this g3 or g4 or both?
Click to expand...
Click to collapse
I wanted to ask the same.
I hope this is g3 compatible.
zolee1988 said:
I wanted to ask the same.
I hope this is g3 compatible.
Click to expand...
Click to collapse
Jesus Christ, JouSePo already posted the answer to your question!
It's the same ROM here:
http://forum.xda-developers.com/showthread.php?t=362278
teixeirabmb said:
Jesus Christ, JouSePo already posted the answer to your question!
It's the same ROM here:
http://forum.xda-developers.com/showthread.php?t=362278
Click to expand...
Click to collapse
Ok, I find it
I usually read the whole thread before starting read the linked thread.
6.1???
it's just the same with the wm6 but the other point it's more faster than other rom i thing!!
I allready PORT my DOPOD 900 G3 with this ROM...
I think this is a FAKE...
Back to WM5 AKU3.3 by HELMI...
Its really fast and stable.
Thanks for sharing.
What's the battery life compared to the (other) WM6 ROMS?
Downloaded, flashed - works good! WPA-TSK (TKIP) works without problems for me. So far this is the fast one but let's see who stable it will be...
Pdaviet WM6.1 really fast
This rom is really fast, it seems stable. Just 3 little problems so far, plug ins for spb diary do not show except defaults, pocket player skins do not show, always keep default skin. Bluetooth audio is not recognized, only handfree.
tsoifun said:
Downloaded, flashed - works good! WPA-TSK (TKIP) works without problems for me. So far this is the fast one but let's see who stable it will be...
Click to expand...
Click to collapse
A2DP doesn't, neither WPA-TSK (TKIP) for me...
SD card problem
There is problem appeared: SD card (2gb) keeps on disconnected on no obvious reasons. Have to slide out then in again and it works. Could be that Wisbar advance&desktop creates problems. Otherwise so far so good. Tested WPA-TSK (TKIP) on various occasions (3COM and Linksys wifi routers) - no problems. Even after automatic turn off it connects without problems
tsoifun said:
There is problem appeared: SD card (2gb) keeps on disconnected on no obvious reasons. Have to slide out then in again and it works. Could be that Wisbar advance&desktop creates problems. Otherwise so far so good. Tested WPA-TSK (TKIP) on various occasions (3COM and Linksys wifi routers) - no problems. Even after automatic turn off it connects without problems
Click to expand...
Click to collapse
Same Problem ... SD 2gb disconnects itself & sometimes it shows only folders (without files) in the storage card.
I'm not running Wisbar softwares on my device but I've SPB Pocket+ installed !
Other than this problem, I find this ROM to be fastest of all..!
Looks like there problem with SD driver.... Was trying to find "Storage Settings" ver 2.0 from HTC - Does anyone has cab file?...
tsoifun said:
Looks like there problem with SD driver.... Was trying to find "Storage Settings" ver 2.0 from HTC - Does anyone has cab file?...
Click to expand...
Click to collapse
Were u able to find any driver for Storage Card??
SD card driver
Hassan101 said:
Were u able to find any driver for Storage Card??
Click to expand...
Click to collapse
HI There,
I think you will find THIS PAGE has the file you need and I can confirm it works on mine. BUT put it onto a clean ROM before anything else. I tried to put it on mine once I was having problems and it didn't work then. I'm into my third day on this ROM and the SD card shows every time.
Also, The fault on the camera buttons is cured well by reassigning the camera button back to the camera, even though it is already. Not everyone had this fault I understand,
Take care
Jay
responderman said:
HI There,
I think you will find THIS PAGE has the file you need and I can confirm it works on mine. BUT put it onto a clean ROM before anything else. I tried to put it on mine once I was having problems and it didn't work then. I'm into my third day on this ROM and the SD card shows every time.
Also, The fault on the camera buttons is cured well by reassigning the camera button back to the camera, even though it is already. Not everyone had this fault I understand,
Take care
Jay
Click to expand...
Click to collapse
Thanks for the head up. My storage card completely disappeared but when I installed this app everything works fine again.
This was the best ROM so for for me. I have been using Jwrightmcpsrom and this one was ten times faster and more stable
Only problem I have and its a big one for me is I use T-mobile trigger plugin. I could not get it to get the email automatically. I would have to hit send and recieve myself. I guess saying that I have to return to Jwrightmcps latest rom.
Thanks.

USB2Pc Popup Cooking

How can it usb2pc popup work on other devices besides raphael,diamond? From wa I see somebody mentioned that it needs to be hex editted and someone did it on kaiser and trying to get it to work on athena to be cooked in.I have zippys newest cab from diamond forums.Any help / step by step is appreciated.
i have no idea what you just said.
but if you're looking for a usb2pc you can use no2chem's nuemassstorage.
nir36 said:
i have no idea what you just said.
but if you're looking for a usb2pc you can use no2chem's nuemassstorage.
*
Click to expand...
Click to collapse
No,im trying to get zippys usb2pc popup app for diamond to work on htc athena.Ive read somewhere that it needs to be hex editted to work on other devices and ive seen it for kaiser.What I wanna know is how to get it working on athena so it can be cooked in a rom.
Sorry for misunderstanding!
Wa I mean by usb2pc popup is the program/service on diamond that asks if I want to start internet sharing,activesync,mass storage when you attach device to pc via usb.
*
D1ab70 said:
No,im trying to get zippys usb2pc popup app for diamond to work on htc athena.Ive read somewhere that it needs to be hex editted to work on other devices and ive seen it for kaiser.What I wanna know is how to get it working on athena so it can be cooked in a rom.
Sorry for misunderstanding!
Wa I mean by usb2pc popup is the program/service on diamond that asks if I want to start internet sharing,activesync,mass storage when you attach device to pc via usb.
*
Click to expand...
Click to collapse
i got it working just fine on the kaiser cooking it in without hex editing it
I've attached the package I'm using.
good luck
Thx Bro,
Since this from opal (non vga),will this work fine on vga devices such as athena in terms of displaying correctly?
D1ab70 said:
Thx Bro,
Since this from opal (non vga),will this work fine on vga devices such as athena in terms of displaying correctly?
Click to expand...
Click to collapse
no, the pictures will be realllllllllllllly small to see.
you need one from touchpro or diamond.
i have it in a package file but i am not at ho,e right now.
i will post soon for you to have.
so i assume it'll work on polaris huh?
try this it is in package form
herg62123 said:
try this it is in package form
Click to expand...
Click to collapse
Thx herg, will give this a try!
mbarvian said:
i got it working just fine on the kaiser cooking it in without hex editing it
I've attached the package I'm using.
good luck
Click to expand...
Click to collapse
what file is that?
does it mean after the installation of this cab, every time when i connect ppc to any pc there will be a balloon pop up to ask me if i want to connect my ppc to pc as mass storage, active sync and etc?????
or must it have active sync installed?
Hi All,
I am wondering if this will work on Vogue? I am on NagROMs 6.5.1 Build 23054.
Thanks,
Apurv

Categories

Resources