Related
Registry Hack Improvement of using bluetooth listen music
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BtA2dpSnd
Add "Priority256 "= dword:60 (Use Dword Value)
HKLM/SOFTWARE/Microsoft/Bluetooth/AudioGateway/Capability
(Dword:69)(Default is 37)
HKLM/SOFTWARE/Microsoft/Bluetooth/AD2P/Settings/BitPool
(Dword: 60)(Default is 30)
Re: Bluetooh listen music (A2DP) - Use Registry Hack to impr
What?
can elaborate the difference in settings?
Yes, I tried this registry hack on my Atom with HS-12W Headset, it eliminated almost 99% of high frequency noise. Now the sound is crytal clear
mine didnt even have the default settings bitpool key
i just tried it and it makes a huge improvement
it's still not perfect, but it's a lot better than before
thanks
for those that don't have the bitpool, add the settings key and then add the dword for bitpool
I understand the bitpool setting, but isn't the audiogateway capability a bitmask used to set the handsfree profile capabilities? Why would that affect a2dp quality?
ehm......hex or dec values???
Re: Bluetooh listen music (A2DP) - Use Registry Hack to impr
sas90850 said:
Registry Hack Improvement of using bluetooth listen music
HKLM/SOFTWARE/Microsoft/Bluetooth/AD2P/Settings/BitPool
(Dword: 60)(Default is 30)
Click to expand...
Click to collapse
The above key isn't available on my AKU2.3 summiter rom. Someone able to make a .cab installer of the correct settings?
reg edit
Hi All,
So I downloaded PHM reg edit and tried what is suggested by sas90850 in the beggining of this topic, but alas, I am too duh to do any serious reg hacks. I can change an existing reg but creating a new one is far beyond me. I do really want to try this hack though. Is there anyone out there that can make this a little more easy to understand or maybe post some screen shots of what it actually looks like, that sort of thing. If I am asking to much, I apologize in advance.
Thanks
Todd
reg edit
Hi All,
So I downloaded PHM reg edit and tried what is suggested by sas90850 in the beggining of this topic, but alas, I am too duh to do any serious reg hacks. I can change an existing reg but creating a new one is far beyond me. I do really want to try this hack though. Is there anyone out there that can make this a little more easy to understand or maybe post some screen shots of what it actually looks like, that sort of thing. If I am asking to much, I apologize in advance.
Thanks
Todd
Re: reg edit
imapfsr said:
Hi All,
So I downloaded PHM reg edit and tried what is suggested by sas90850 in the beggining of this topic, but alas, I am too duh to do any serious reg hacks. I can change an existing reg but creating a new one is far beyond me. I do really want to try this hack though. Is there anyone out there that can make this a little more easy to understand or maybe post some screen shots of what it actually looks like, that sort of thing. If I am asking to much, I apologize in advance.
Thanks
Todd
Click to expand...
Click to collapse
i tried to make a CAB to install those registrieds at once.
It can work to change registries value in my Universal.
You can try this, i sugest make a softreset to effect changes.
@My Qtek 900 1.30 ROM<Universal> has no registry follows,
But i added to test,,,
HKLM/SOFTWARE/Microsoft/Bluetooth/AD2P/Settings/BitPool
Find this post from here:
If you encounter sond drop problem, other web site which I found has shown some new A2DP settings that may be useful to others with bandwidth problems. You can control the bitrate with the following registry key/values.
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\A2DP\Settings]
"BitPool"=dword:00000051
"SampleRate"=dword:00048000
There is a table in the A2DP Specification that shows several values to use that result in the following bitrates.
Medium Quality
BitPool=35, SampleRate=44.1khz = 229kb/s
BitPool=33, SampleRate=48khz = 237kb/s
High Quality
BitPool=53, SampleRate=44.1khz = 328kb/s
BitPool=51, SampleRate=48khz = 345kb/s
There are also parameters called "MinBitPool", "MaxBitPool" so the device can pick for itself depending on mp3 quality etc. I haven't tested the min/max parameters yet, but apparently these are used by default.
Hope it can help.
I am a little confused now... :?
What's the correct path to the BitPool key?
Is it HKLM/SOFTWARE/Microsoft/Bluetooth/AD2P/Settings/BitPool
or HKLM/SOFTWARE/Microsoft/Bluetooth/A2DP/Settings/BitPool
???
djvw said:
I am a little confused now... :?
What's the correct path to the BitPool key?
Is it HKLM/SOFTWARE/Microsoft/Bluetooth/AD2P/Settings/BitPool
or HKLM/SOFTWARE/Microsoft/Bluetooth/A2DP/Settings/BitPool
???
Click to expand...
Click to collapse
should be a2dp
Re: reg edit
Asukal said:
imapfsr said:
Hi All,
So I downloaded PHM reg edit and tried what is suggested by sas90850 in the beggining of this topic, but alas, I am too duh to do any serious reg hacks. I can change an existing reg but creating a new one is far beyond me. I do really want to try this hack though. Is there anyone out there that can make this a little more easy to understand or maybe post some screen shots of what it actually looks like, that sort of thing. If I am asking to much, I apologize in advance.
Thanks
Todd
Click to expand...
Click to collapse
i tried to make a CAB to install those registrieds at once.
It can work to change registries value in my Universal.
You can try this, i sugest make a softreset to effect changes.
@My Qtek 900 1.30 ROM<Universal> has no registry follows,
But i added to test,,,
HKLM/SOFTWARE/Microsoft/Bluetooth/AD2P/Settings/BitPool
Click to expand...
Click to collapse
I did try it and view that all settings are the same as state above. However, the quality is still the same, a hissing sound at the background
Do I any missing?
I have just applied this to my Atom and it's working wonderfully. I've choosen a BitPool of 53 myself. I don't know WHY these devices wouldn't be shipping with better settings. Simply registry edits shouldn't cause THIS much of an improvement
Goodge said:
I have just applied this to my Atom and it's working wonderfully. I've choosen a BitPool of 53 myself. I don't know WHY these devices wouldn't be shipping with better settings. Simply registry edits shouldn't cause THIS much of an improvement
Click to expand...
Click to collapse
Hi Goodge, so you're using BitPool 53 and SampleRate 44khz? Does your atom still skips ocationally? Any one got this fixed? Thanks...
RE
GREAT! JUST GREAT!!!
One thing I noticed is that hiss from music could come from the manner the song was ripped/copied ie. noise introduced during the ripping/copying process. In such a case I don't believe any registry hack can remove the inherent hiss.
Secondly, the quality of the headphone counts ie. for the same song played some headphone may exhibit more hiss than others
Wow, I've just applied, it works! Can't tell the diff from Bluesoil's... But I still have that occational skips Keep up the good findings guys!!!
ok the one cab that is out for the word suggestion fix doesnt work all the time.. so is there a for sure fix? i hate the word suggestion and i feel it slows me down as i txt because i fly when i txt
Cyber-mate Cyber-mate is offline
Senior Member
Join Date: Sep 2004
Location: UAE
Posts: 221
[Dubai] [United Arab Emirates - UAE ETISALAT-G2]
Thumbs up SuggWords fix...
I have discovered another way to fix this and even chang it to the number of words you want -of course reasonable.
\HKLM\SOFTWARE\Microsoft\CompIME
...change the "SuggWords" DWORD to the value tht reflects number of words suggested. I use 8, quite okay though.
I thought the same about SIP string but it is very stubborn!
...i changed it to 0 and it works!
AWESOME! Thanks.
There's duplicate entry in all WM6 wizard builds (except mine NBD, off course) for the value of SuggWords, and therefore Control Panel applet doesn't remember settings you made. The value in \HKLM\SOFTWARE\Microsoft\CompIME should be DELETED, and one in
HKCU\ControlPanel\Sip is correct one.
zoki said:
There's duplicate entry in all WM6 wizard builds (except mine NBD, off course) for the value of SuggWords, and therefore Control Panel applet doesn't remember settings you made. The value in \HKLM\SOFTWARE\Microsoft\CompIME should be DELETED, and one in
HKCU\ControlPanel\Sip is correct one.
Click to expand...
Click to collapse
I cannot find the SuggWords in HKCU\ControlPanel\Sip ? we have same build, so ... why ?
Maybe silly suggestion, but maybe You are looking in HKLM
Its HKCU.
I did that mistake
I have Xplore 1.1 and i have it
Update:
But, i found an issue..
When i type a name in name line, for example in sms, system suggest the name. And everything would be ok, but when i press down arrow, it's not marking the name, as it was before, but the cursor goes straight to text field. When i bring back this reg, everything works again.
Changing DWORD in SuggWords to 0 work for me
klabton said:
Maybe silly suggestion, but maybe You are looking in HKLM
Its HKCU.
I did that mistake
I have Xplore 1.1 and i have it
Click to expand...
Click to collapse
No, I was looking in the rgu's and is no there
Not even in the provxml's... Anyway I fixed that
zoki There's duplicate entry in all WM6 wizard builds (except mine NBD, off course) for the value of SuggWords, and therefore Control Panel applet doesn't remember settings you made. The value in \HKLM\SOFTWARE\Microsoft\CompIME should be DELETED, and one in
HKCU\ControlPanel\Sip is correct one.
could we technically just delete the entire \HKLM\SOFTWARE\Microsoft\CompIME entry then? like the whole CompIME folder
Hey guys,
basically i have upgraded to gullum's ROM and found that my MMS settings are wrong, meaning that pictures i send get resized by o2. My mms pictures are tiny and i need a registry entery from the original orbit 2 rom to help.
The links to this are:
http://forum.o2.co.uk/viewtopic.php?t=11821
and
http://forum.xda-developers.com/showthread.php?t=441428&page=2
could someone with the original o2 rom installed please tell me the registry entries at location:
HKEY_LOCAL_MACHINE - Software - Arcsoft MMS UA - Config - mm1 - WspHeader
for
User-Agent string
and
x-wap-profile string
thanks
Fergus
As a temporary measure i decided to use the info from this thread,
http://forum.xda-developers.com/showthread.php?p=2648519
but i still need the orbit 2 settings. If anyone can spare 5 min to check those registry strings that would be great, thanks!
just for my own records what the gullum ROM has is:
(http://www.htcmms.com.tw/gen/Polaris-1.0.xml)
and
(HTC_P3650/arcsoft-mmsua-4.0.0.xx)
User-Agent string
HTC-8900/MR2
and
x-wap-profile string
http://www.htcmms.com.tw/ATT/Pilgrim-1.0.xml
thanks for replying, but are you sure you are using o2? Those headers would appear to be for another service provider and model.
Surely the user agent profile would have orbit2 in it somewhere?
I have the 02 XDA Orbit 2 running O2's official wm6.1 update:
RUU_Polaris_O2_UK_3.13.206.0_radio_sign_25.85.30.07_1.59.42.15_Ship.exe
But, I am in the USA and use a cab file to install AT&T's settings. Guess that's a problem as far as the settings you're seeking.
Sorry.
this makes perfect sense then. The cabinet file has likely altered your mms applications software, arcsoft to think that the phone is the pilgrim. Likely this is a phone that At&T sells with its network, so it knows exactly how to handles picture messages from this phone.
The ignito fix works for me in the same way, however i would prefer the original o2 settings.
Had occasion to do a hard reset so I let it install the O2 UK Post Pay settings. Hopefully this is what you need:
User-Agent
Xda_Orbit_2/arcsoft-mmsua-4.0.0.xx
x-wap-profile string
http://www.htcmms.com.tw/gen/Polaris-1.0.xml
thank you very much this is exactly what i was needing! Your help is much appreciated.
However it is just my luck, i need to reflash since i appear to have a touch screen/button fault. If this doesn't clear then i will be sending the device back. So i will have the opportunity to get the settings anyway!
Hi
I've searched this for a couple of hours, but cannot find anything.
I store a number in the phone book in the standard way....07xxxxxxxxx.
Occasionally, when a call comes in, it'll come through as +44xxxxxxxxx.
When it does this, it displays Unknown Caller.
It didn't do this with the Vario II or III.
Any ideas why this happens, and how to rectify?
On a different note, i've never flashed my phone. I'm not computer illiterate, but could someone tell me how to do it!!!!
Thanks for your help
Best regards
It is a problem with caller ID trying to match too many numbers, you can change this setting in the registry under call ID match (trying to find a link)
* HKCU\Control Panel\Phone\CalIidMatch value:7
xda link:
http://forum.xda-developers.com/showthread.php?t=515136
is definately your problem, I had the same thing drove me mad.
Hi laughloudly
Thanks for your reply.
Sorry to be stupid but can't find HKCU on my phone? - HKCU\Control Panel\Phone\CalIidMatch value:7
Best regards
You have to get a Reg Editor and navigate to that specific registry key.
Thanks Bruce, could you recommend one?
Total Commander has a fantastic reg editor builtin (in the \\plugins folder).
mine is set to match 8 digits (im in the UK)
HKLM/Software/OEM/PhoneSetting
and what are the names and value for anything that has prepend in it
I have an AT&T Fuze stock ROM version 5.11.502.2 WWE. Here are the registry keys and values under PhoneSetting. I don't see anything with "prepend" in the name.
[HKEY_LOCAL_MACHINE\Software\OEM\PhoneSetting]
"Last_SMS_Tick"=dword:0463d7fc
"ShowUMTSBandPage"=dword:00000000
"ONSDisplayRule"=dword:00000004
"LongNamePrefix"=""
"Enable3GLongNamePrefix"=dword:00000000
"PhoneSettingExt-DLL"="PhoneSettingExt.dll"
"EnableAutoPickupSec"=dword:00000001
"RefreshPINStatus"=dword:00000001
"ShowPIN2Page"=dword:00000000
"ShowPINPage"=dword:00000001
"ShowNITZPage"=dword:00000001
"QOSTrafficClass"=dword:00000004
"ShowALSPage"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\OEM\PhoneSetting\FDN]
"FDN_Datang"=dword:00000000
"FDN_RW_Immediate"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\OEM\PhoneSetting\BandType]
"ItemValue4"=dword:00000003
"ItemName4"="UMTS(2100+800)"
"ItemValue3"=dword:00000002
"ItemName3"="GSM(1900+850)+UMTS(1900+850)"
"ItemValue2"=dword:00000001
"ItemName2"="GSM(900+1800)+UMTS(2100)"
"ItemValue1"=dword:00000000
"ItemName1"="Auto"
"ItemCount"=dword:00000004
[HKEY_LOCAL_MACHINE\Software\OEM\PhoneSetting\NetworkType]
"ItemValue3"=dword:00000002
"ItemName3"="WCDMA"
"ItemValue2"=dword:00000001
"ItemName2"="GSM"
"ItemValue1"=dword:00000000
"ItemName1"="Auto"
"ItemCount"=dword:00000003
thanks, i wonder where they hide the prepend settings