Related
How can I tell if my phone is cid-locked, I would really like to change the ROM without the risk of bricking it. Has anyone one tried lokiwiz to cidunlock their phone? any advice would be appreciated. BTW I bought the phone from gray market in Hong Kong and is Vodafone branded, do you think it would be locked?
It came preloaded with Dopod Rom, but I don't like it that much. Also what is the best radio rom, the dopod radio rom is a bit weak.
IPL 2.15.0001
SPL 2.15.0001
Rom vs: 2.15.13.27 WWE
Radio: 02.19.21
Protocol version: 4.1.13.09
Ext ROM: 2.15.13.21
Thanks
locked
you are on G4, so yes you are still CID locked.
Normally when you flash your rom you will know imediately when it try to update.
kenxu said:
you are on G4, so yes you are still CID locked.
Normally when you flash your rom you will know imediately when it try to update.
Click to expand...
Click to collapse
so should I try to flash a rom and see what happens? if it goes through without an error it is cid unlocked? if an error pops up it is locked? Should I try this or should I avoid the risks? Any ROM suggestions? Qtek maybe?
Since your phone is G4 chip, i'm pretty sure you are CID locked. Dont worry about the CID locking for now, GOOD ROMS outthere been using different programs to get around CID locking problem. I suggest you can start with PDAMobiz rom from the other thread. REMEMBER USE G4 program not G3 or other programs. or look for any rom that has NoVender CID in the name.
MDA VARIO II with Dopod WM6
I recently bought Tmobile MDA Vario ii with Dopod Wm6. When it boots it shows dopod sign so I think it is dopod. The ROM is 3.54.707.3.
I want to upgrade to Wm6.1 but Tmobile has only official 3.60.xx rom presently available for download. Can I directly flash any Hermis compatible ROM on MDA Vario II.?
Since it has Dopod WM6 the CID lock must have been diabled I suppose. Am I right? and should I directly flash any HERMIS official or extended ROM? what are your suggestions Thanks
Hemant
I don't know enough about the Hermes and flashing to be certain, but I think you'll need to HardSPL (which bypasses bootloader CID checks) before flashing a ROM.
Take a look at the Hermes sub fora before doing anything though...
I followed Dr. Puttingham's thread and Yippie's thread to a tee in addition to reading threads in this forum for a good number of hours each day for two weeks. Yesterday, I became brave enough to downgrade my 2.26 Ipl / 2.26 spl; GSM 2.25.11; OS 2.26.10.2 MDA with a goal to upgrade to a custom WM6 rom with touchflo.
* Started with flashing the button rom then cid unlock with lockwiz2b which looked successful no errors but got a 1.xx IPL / 2.26 SPL since I got a 2.26 SPL then
* flashed the wizard love rom then then cid unlock with lockwiz2b which looked successful also but got the same results - a1.xx IPL / 2.26 SPL again then
* flashed the 2.26 T-mobile rom from the Tmobile website then
* flashed NBD 8.3 only to go back to Tmobile's 2.26 rom - DISAPPOINTED after two hours...............
Any assistance would be appreciated without bricking my MDA. Also, I read the thread on how to install a 2.x rom in a cid locked G3, this method appears a little bid complicated and if I need to move forward with this method, would this method work for any WM6 rom with touchflo and if somebody could simplify the method in layman's terms for newbie's like me could understand, please advice.
Let me know if I missed anything in the process.
Thanks, Technobuff
After u do cid unluck and sim unluck and its reboots do a downgrade again to the button rom and ur ipl and spl will change.(u do not have to re-due the onlucking procedure again)
I tried again performing Dr. Puttingham's CID unlocking process in terms of flashing the button rom then the CID unlock process using Lokowiz2b but while I am at the DOS screen trying to CID unlock my MDA it the DOS screen showed unlocking phone........DO NOT DISCONNECT UNTIL THE PHONE REBBOTS.
This process went on for 5 then 10 then past 30 minutes until I gave up. To be on the safe side I turned off the LAPTOP by taking the battery then pulled the USB cable from the PC to the MDA.
What is the typical timeframe for the unit to CID unlock? Why is is it hanging? Am I missing or skipping the process? How can I complete the process?
Any help would ber greatly appreciated by newbies who read threads.
Technobuff
The problem is that you need to have an IPL/SPL of 1.xx before you try to unlock your phone. CID unlocking will not change your SPL which means that you had an IPL of 1.xx and an SPL of 2.26 before you even tried to unlock. You need to reflash the button ROM over and over until your IPL and SPL both show 1.xx and then run lokiwiz.
dont get your point, i have been using shelltool for ages without any problems and quite a lot custom roms. my SLP/IPL is 3.08.
regards
irm
unlock problem
if your device doesn't reboot almost at once after the unlock, it probably didn't work. That is what happened to me. Did you get four lines of File cannot be opened or a similar message? I got that from following the 17 steps carefully. What was wrong for me was unzipping to the root directory of C:/. When I redid it to the desktop and executed from there, no problemo.
Your symptoms sound exactly like mine. I posted a longer thread, somewhere....
LH
Ok i did a little booboo and yesterday was using equinoxe's softspl tool by mistake (didn't notice i had a g3), this causes you to actually end up with the exact same os you had before you flashed.
The best advice I can give: Open the Dr's guide and follow every step closely. (also just found this guide. Its a bit simpler http://forum.xda-developers.com/showthread.php?t=305225)
Once you CID unlock you should be able to use the RUUs to flash.
Make sure everytime you do any of the steps that dr. putt gives to be comepletely synced to activesync.
Also dont forget to load enablerapi.cab on your wizard.
Also you must use the unlock function before the cid unlock function in lokiwiz.
OH also the unlock will work after your ipl drops to 1.xx After you do the unlocks reflash button to drop the spl to 1.xx Then just flash up to a higher IPL/SPL as the Dr states.
If it seems unorganized im sorry =P
4irm said:
dont get your point, i have been using shelltool for ages without any problems and quite a lot custom roms. my SLP/IPL is 3.08.
regards
irm
Click to expand...
Click to collapse
Umm I believe the IPL/SPL of 3.08 means your phone is unlocked... so you really shouldnt need to use shell tool. Some correct me if I'm wrong
slod said:
Umm I believe the IPL/SPL of 3.08 means your phone is unlocked... so you really shouldnt need to use shell tool. Some correct me if I'm wrong
Click to expand...
Click to collapse
Just cause you have 3.08 does not mean you are unlocked..you could have upgraded a 2.xx ipl/spl without having downgraded and unlocked first.
thanks. helps me to learn stuff.
CID???
how wil i know if my fone mda vario is CID unlocked?
it is now installed with t-mobile 2.26 ROM
thanks.
rizortiz
famewolf said:
Just cause you have 3.08 does not mean you are unlocked..you could have upgraded a 2.xx ipl/spl without having downgraded and unlocked first.
Click to expand...
Click to collapse
right, i installed the latest german t-mobile rom and my device is still locked. the point i made is why the hell does somebody want to downgrade? It doesnt matter if u use the shelltool.
regards
irm
4irm said:
right, i installed the latest german t-mobile rom and my device is still locked. the point i made is why the hell does somebody want to downgrade? It doesnt matter if u use the shelltool.
regards
irm
Click to expand...
Click to collapse
Perhaps they want it actually cid unlocked for resale value...or perhaps they prefer the RUU method of installs vs having to use shelltool.
Hi!
I need some help / steps to update my Wizard to WM6 (or 6.1)
I tried with diferent ROMs, i followed the differrent guides, but something strange is happening.
After installing the ROM, everithing seems ok, the device restarts, but ... i still have the WM5!!!
What i missed? I have IPL/SPL 2.18, unlocked phone.
Some guidelines?
Thanks!
Peter
Not cidunlocked... as usual...
CID locked
Thanks!
I missunderstood that CID lock is different from SIM lock. No i undestand what's happening.
The problem thta i have now is using WST. I tried to unlock CID, but it says that i have to downgrade SPL to 1.06 to unlock CID (because is write protected)
So, corret me if i'm wrong, i have to
Downgrade SPL to 1.06
Unlock CID
Upgrade SPL to 2.xxx
Install WM6 ROM
It's correct?
Thanks!
P
PeterSlam said:
Thanks!
I missunderstood that CID lock is different from SIM lock. No i undestand what's happening.
The problem thta i have now is using WST. I tried to unlock CID, but it says that i have to downgrade SPL to 1.06 to unlock CID (because is write protected)
So, corret me if i'm wrong, i have to
Downgrade SPL to 1.06
Unlock CID
Upgrade SPL to 2.xxx
Install WM6 ROM
It's correct?
Thanks!
P
Click to expand...
Click to collapse
YUP ! thats correct.First downgrade to IPL/SPL 1.xx to CID unlock,than upgrade to 2.xx for upgrading to wm6 or 6.1 ,follow this guide :-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
use button's rom to downgrade to 1.05 and make sure both IPL/SPL are 1.05 sometimes u have to do it twice to get to this state..
then unlock it both supercid and sim
then u can update to WWE 2.26 as this is the most solid base..
i purchased a kaiser that has been fully unlocked with no carriers attached to it. i want to install a cooked rom e.g Dutty on my phone. Do i still need to do the sim unlock and hard spl?. Can i just install the rom update without doing any of those steps?.
You don't need to sim unlock it but you will need to cid unlock the phone and install hard-spl still.
Jeff
READ READ READ. Trust me.
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
So I have followed the guides, two of them conflicting each other (one tells me Wizard Love while other says Button)
So I pick wizard love because I did the factory update a few years back to 2.25
use loki3
run tmobile 2.26 and it fails
run the 3.08 and it works
try to install TNT roms... all get stuck at 99% except one but the rom doesn't work because I am still on windows 5.1
Now on my third attempt it gets stuck at bootloader. Can't get the phone to turn back on to normal mode just to use it and forget about trying these roms
Any ideas?
Got button to work some how
Now I am at IPL 1.01 and SPL 3.08
Hopefully I can redo everything and get 6.1 to work
It tells me my CID/SIM but no where does anyone tell me where I need to insert this ID code at.
ID code? What do you mean by that?
I ment CID, it was telling me the CID like if I needed to enter some sort of menu and run it
Running t-mobile rom again, hopefully this works
You sure that it wasnt asking for a SIM unlock code? OR was it giving you a "data crashes" message?
Nope neither of those.
Anyways
Tmobile screen pops up now with 2.26/2.26
In regards to installing new roms, do I just launch ROMUpdateUtility or Do I need to do a CID unlock again?
Also saw there is 3.08/3.08 available, Update before or after upgrading the wm6.1 rom?
Well, lemme ask you this, what is your device? Is it a G3 or a G4, if G3, then sure, update your IPL/SPL after you upgrade. If it is a G4 however, FOR THE LOVE OF TUNA DO NOT upgrade your IPL/SPL or you will have a brick on your hands. And also, if you have used HardSPL, then no, you do not have to CID unlock your device again. Personally, I just use the SoftSPL method each time I load a ROM. If your device is a G4, I have made a guide in the G4 section that should help you. Its got screenshots and such aswell.
G3
Yay somehow it worked this time, 6.1 is nice
I did softspl
3.08 worth it?
If you device is G3 - FORGET HARDSPL
You mention that you have IPL 1.xx and SPL 3.xx
get WST - Wizard Service Tool and follow the instructions to cid unlock you device, unfortunately you cannot unlock your SIM with the SPl that you have for now
After that flash a carrier ROm to align your IPL/SPL to 2.xx
Ohh it now displays 2.26 on both IPL/SPL
From what I read, 3.08 is mainly for the european radio brand in terms of what the focus on it was for
<---AT&T
Hopefully this will be my last month with this company, figured I try some things out before I put the phone away or give it away to a friend.
Ok, you have a G3 device
Get WST: http://forum.xda-developers.com/showthread.php?t=329170
Install in your PC (XP not Vista), check the situation about your CID and SIM
If you have CID unlock = SUpercid you can flash any ROm you want, if not you must downgrade to IPL/SPL 1.xx (Button Rom)
WST Unlock only works with IPL/SPL 1.xx
Note that SIM can only be unlocked with your SPL as 1.xx
go on run, type msconfig and open that, close all microsoft services and install,
Ckamc said:
Ohh it now displays 2.26 on both IPL/SPL
From what I read, 3.08 is mainly for the european radio brand in terms of what the focus on it was for
<---AT&T
Hopefully this will be my last month with this company, figured I try some things out before I put the phone away or give it away to a friend.
Click to expand...
Click to collapse
DUDE! I'm your friend you can give it to me
Or you could use tmobile with that phone (or any other company that uses sim chips for service) .
Once you have it completely unlocked (cid/sim) you can take it traveling to other countries and use their prepaid sim cards... This is an open phone. dont get rid of it.
on second thought, I will buy it from you if you dont see a reason why you would keep it. I could use a backup to test my cooking on PM me
HAHAHAHA
S.V.I said:
DUDE! I'm your friend you can give it to me
Or you could use tmobile with that phone (or any other company that uses sim chips for service) .
Once you have it completely unlocked (cid/sim) you can take it traveling to other countries and use their prepaid sim cards... This is an open phone. dont get rid of it.
on second thought, I will buy it from you if you dont see a reason why you would keep it. I could use a backup to test my cooking on PM me
Click to expand...
Click to collapse
You know when an oportunittie comes huh!
I can buy it too but its more glad to see a wizard function well with 6.1
hope you can unlock and upgrade... if not... READ a lot.
Losing Mind (again)
OK, here we go.
First off, I am in no way new to Flashing or the logistics behind it. I am sure this is just something that I cant find by searching. But my problem is this.
I have a G3 TMOBILE USA MDA (Wizard). I have used the lokiwiz2 unlock software several times and according to the program I am SUPERCID unlocked. I am able to flash ROMS all day long. I get no error about loading. What is happening is that I almost always end up with the same default ROM after the FLASH is completed. I am now sitting with the Button ROM on the unit. I assume if the Button ROM loads, then I should be CID Unlocked otr it would not load (or is this my mistake in thinking?)
As my MDA sits now, I have the Beer Mug Displayed, IPL 1.05
SPL 2.26 GSM 01.12.10 OS 1.5.4.2
Now, if I go and try to Flash to one of the Two ROMS I want to go to
TMOUS_MDA_5.2.1629_Wing_Port_1.1 (Boring ROM) or I try with SNN 3.1 it will run the procedure perfectly, and I will end up with a Barebones version of Windows Mobile 5.0. This is wild.
Has anyone seen this happen and is laughing and going "Been there, here is the problem,,) or do I need to discuss this in more detail.
Im wondering if the ROM Upgrade Software is grabbing a ROM from elsewhere on my Hard Drive and is installing it from cache or something like that. Is there another version of the OS Upgrader that allows me to tell it exactly what ROM I want installed, instead of just installing whatever it wants.
Thanks for the help, after two days of searching and looking around, I can deal with amteur hour emabreesment, just HELP!!
My xv6800 and my 8125 was a breeze compared to this nitemare. (BTW, I also flashed this 2 years ago with the TMOBILE USA Official Release, no issue)
wyreless
Well,these are symptoms of CID not unlocked.Button's Rom flashed doesn't mean its CID unlocked,its a patched IPL/SPL rom simply to downgrade to IPL/SPL 1.xx for CID unlocking.
Simply,download WST_4.2.2 and run it to verify the CID lock/unlock status of the phone and do the right thing onwards.
Thank You Zabardast for the quick and to the point answer.
I was thinking in the back of my head it was a CID issue. It was just that everything seemed to be "moving right along". I sthere an easier or better Unlocking soiftware then lokwhiz for the Wizard Series, specifically my USA Tmobile MDA?
Well,if you have Button's Rom running successfully,so its IPL/SPL must be 1.xx already,there shudn't be any problem to use lokiwiz02b to CID unlock the phone,you can even use WST_4.2.2 tool also to easily CID unlock the phone.
There's no other method known to get CID unlocked a wizard freely,unless you are ready to pay to IMEI company to get a unlock code
hey alll..ok i screwed up
i downloaded Charecters ROM..i used WST and it showed that my device is G3 and its CID locked..well i just started the Flashing and it stuck at 99%
now it wont load any ROM and just as i came from school..its not evening starting..its not evening charging..please help any one
for one to flash a rom you must CID unlock it first...