Related
Hi, I want perform an uograde on my imate sp5 to wm6, i look your guide, but doesn't work for me.
First of all, when i have downloaded spvservice.zip e xctract it, i found 3 files, cert.cab, spv-service.exe and TyphoonNBFTools.dll, it's correct?
when on my pc start spv-service receive an error:
"Failed to create a empty document"..What is this?
then i delete a dll file and spv service starts, but with another error: "RAPI Init failed: Client DLL not found".
Please help me!!
if u fail to unlock using unlock application try try this:
Download regeditSTG2 fro: http://4pda.ru/forum/attach/387522/regeditSTG2.zip
Then install it and change some registry values:
HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 1001 = 2
-> change to 1
HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 1005 = 16
-> change to 40
HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 1017 = 128
-> change to 144
HKEY_LOCAL_MACHINE \Security\Policies\Policies
-> create new key "0000101a": Dword = 1
HKEY_LOCAL_MACHINE \Security\Policies\Policies
-> create new key "0000101b": Dword = 1"
sfter restart and supercid using lokwiz
mine is an rooted lg optimus p500 with stock gingerbread 2.3.3 ,firmware v20c for india.last day i installed rom manager trail,when i tried to back up current rom,the phone gone off,now it is strucked at lg logo.i tried kdz for installing another stock rom.but it says phone is not connected. i checked through adb,when typing command 'adb shell' it also says no devices found.hard reseting is not working,no emergency mode. what to do??? pls help me.
Did u flash recovery first before hitting backup current rom? If you are getting LG logo then u should get emergency mode. Press volume up button+return key + connect the usb cable connected to your PC all at the same time. http://forum.xda-developers.com/showthread.php?t=883314 Read this. it will help u.
reinstall drivers.
let your phone be on (stuck at lg logo), connect to computer, flash custom recovery from lgmdp.
There might errors occur at nv backup or nv restore but it will flash recovery.
sweettaniyaa said:
Did u flash recovery first before hitting backup current rom? If you are getting LG logo then u should get emergency mode. Press volume up button+return key + connect the usb cable connected to your PC all at the same time. http://forum.xda-developers.com/showthread.php?t=883314 Read this. it will help u.
Click to expand...
Click to collapse
thnks. phone recovered. then how to back up current rom using rom manger????.do i want to flash recovery first.??
phone not even starting
hi everyone,
i tried to update the firmware on my op1 p500.it came to emergency mode,but after this some error occured and kdz updater showed 'c drive erased'
and now my phone is not even starting.
it is in warranty,but i dnt knw wat reason i can tell at the service center,that wat happened to the phone.
Plz help.
farzii said:
hi everyone,
i tried to update the firmware on my op1 p500.it came to emergency mode,but after this some error occured and kdz updater showed 'c drive erased'
and now my phone is not even starting.
it is in warranty,but i dnt knw wat reason i can tell at the service center,that wat happened to the phone.
Plz help.
Click to expand...
Click to collapse
If the phone can't boot, then it's alright. Easy. Something like "I switched it off before I went to sleep and the next morning I couldn't turn it on" should do the trick
Sent from my LG-P500 using xda premium
farzii said:
hi everyone,
i tried to update the firmware on my op1 p500.it came to emergency mode,but after this some error occured and kdz updater showed 'c drive erased'
and now my phone is not even starting.
it is in warranty,but i dnt knw wat reason i can tell at the service center,that wat happened to the phone.
Plz help.
Click to expand...
Click to collapse
Just say when you are updating firmware it had an error and your phone would not start up.
Lg bricked
I've got a similar problem;
Rom manager crashed my phone (lg p500) when i was trying to back-up the original rom. The Phone booted in <b> fastboot mode </b>, i've followed the guide your guide to recover, but the phone crashed and even the fastboot mode disappeared. After a long research i've found the kdz 'ultima ratio' system, i've started the phone to <b> emergency mode </b> followed all the procedure (shaking included) trying to flash my phone to V10C.kdz, the result was
[23:14:11:932] : =============================================
[23:14:11:932] : Log is started on 06.03.2012, at 23:14:11:932,
executable: C:\Users\giuseppe\Desktop\KDZ_FW_UPD_EN\KDZ_FW_UPD.exe (ProcID: 0x00000810),
compile time : May 24 2011 11:19:45
[23:14:11:932] : Version :
[23:14:11:932] : Get Usb Port
[23:14:11:979] : rsi.strFriendlyName=Porta di comunicazione (COM1)
[23:14:11:979] : Remove Porta di comunicazione (COM1)
[23:14:11:979] : rsi.strFriendlyName=LGE Bluetooth TransPort (COM4)
[23:14:11:979] : Remove LGE Bluetooth TransPort (COM4)
[23:14:11:979] : rsi.strFriendlyName=LGE Android Platform USB Serial Port (COM11)
[23:14:11:979] : FriendlyNameList[iii].szFriendlyName=LGE Android Platform USB Serial Port
[23:14:11:979] : WM_COPYDATA žÞœÃÁö ºž³¿ 1 - COM11
[23:14:11:979] : Port = COM11
[23:14:11:995] : UNKNOWN : Req(12) -> Rsp(13)
[23:14:12:010] : UNKNOWN : Req(12) -> Rsp(13)
[23:14:12:026] : UNKNOWN : Req(12) -> Rsp(13)
[23:14:12:026] : >> DIAG_STATUS_F FAILED
[23:14:12:041] : >>Get Model Name [DIAG_VERNO_F]
[23:14:12:057] : BAD CONN MODE : Req(0) -> Rsp(3)
[23:14:12:073] : BAD CONN MODE : Req(0) -> Rsp(3)
[23:14:12:088] : BAD CONN MODE : Req(0) -> Rsp(3)
[23:14:12:104] : BAD CONN MODE : Req(0) -> Rsp(3)
[23:14:12:119] : BAD CONN MODE : Req(0) -> Rsp(3)
[23:14:12:135] : BAD CONN MODE : Req(0) -> Rsp(3)
[23:14:12:135] : FAIL (No Phone)
[23:14:12:135] : GetModelName() Operation Failed Check Diag CMD
[23:14:12:135] : EMERGENCY Booting Mode
[23:14:12:135] : >>Get Model Name in Emergency Mode [DLOAD_VERREQ_F]
[23:14:12:151] : BS/P500/7Diuseppe\AppData\Local\Temp\DZ
[23:14:12:151] : WM_COPYDATA žÞœÃÁö ºž³¿ 0 - P500
[23:14:12:166] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[23:14:12:166] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[23:14:12:182] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[23:14:12:182] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[23:14:12:197] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[23:14:12:197] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[23:14:12:197] : NV Write Fail : NV ITEM 9028(9028)
[23:14:12:307] : >> GET DLOAD COMM MODE
[23:14:12:322] : [GetCommMode] Communication mode : 2
[23:14:12:322] : Pre Nand Download
[23:14:12:322] : >>Set Trusted Mode [DLOAD_NAND_SEC_MODE] sec_mode = 1 (1=trusted 0=NonTrusted)
[23:14:12:322] : WM_COPYDATA žÞœÃÁö ºž³¿ 3 - TRUSTED MODE
[23:14:12:338] : [COM11] >>NandFlashInitWithFile(PARTITION TBL)
[23:14:12:338] : WM_COPYDATA žÞœÃÁö ºž³¿ 3 - INIT PARTITION TBL
[23:14:17:267] : žÞœÃÁö ºž³¿ TYPE_WPARAM_WRITE_AMSS 15
[23:14:17:267] : [COM14] žÞœÃÁö ºž³¿ TYPE_WPARAM_WRITE_AMSS 15
[23:14:17:267] : [COM11] >>NandFlashInitWithFile(AMSS MODEM HEADER)
[23:14:17:267] : WM_COPYDATA žÞœÃÁö ºž³¿ 3 - INIT AMSS MODEM HEADER
[23:14:17:283] : [COM14] >>Dl_AsyncWrite()
[23:14:17:283] : >> AMSS FLASHING ...
[23:14:17:283] : žÞœÃÁö ºž³¿ ProgreassiveBar Init wParam TYPE_WPARAM_PROGRESSIVE_POS=5 lParam(pos)=0 nResult=0
[23:14:17:283] : Sending Pkt Seq : 0
[23:14:17:283] : Sending Pkt Seq : 1
[23:14:17:283] : Sending Pkt Seq : 2
[23:14:17:283] : Sending Pkt Seq : 3
[23:14:17:283] : Sending Pkt Seq : 4
[23:14:17:283] : Sending Pkt Seq : 5
[23:14:17:283] : Sending Pkt Seq : 6
[23:14:17:283] : Sending Pkt Seq : 7
[23:14:17:283] : Sending Pkt Seq : 8
[23:14:17:283] : Sending Pkt Seq : 9
[23:14:17:283] : Sending Pkt Seq : 10
[23:14:17:283] : Sending Pkt Seq : 11
[23:14:17:283] : Sending Pkt Seq : 12
[23:14:17:283] : Sending Pkt Seq : 13
[23:14:17:283] : Sending Pkt Seq : 14
[23:14:17:283] : Sending Pkt Seq : 15
[23:14:17:283] : Sending Pkt Seq : 16
[23:14:17:283] : Sending Pkt Seq : 17
[23:14:17:283] : Sending Pkt Seq : 18
[23:14:17:283] : Sending Pkt Seq : 19
[23:14:17:283] : Sending Pkt Seq : 20
[23:14:17:283] : Sending Pkt Seq : 21
[23:14:17:283] : Sending Pkt Seq : 22
[23:14:17:283] : Sending Pkt Seq : 23
[23:14:17:283] : Sending Pkt Seq : 24
[23:14:17:299] : Dl_AsyncWrite - ErrNo(45), Addr(0x0000C600), NandErrNo(0x04)
[23:14:17:299] : [COM14] ERROR Dl_AsyncWrite() TYPE_LPARAM_UPGRADE_ERROR_WRITE_TO_FLASH
[23:14:17:299] : WM_COPYDATA žÞœÃÁö ºž³¿ 3 - Close Port
[23:14:17:299] : Close Port<<
[23:14:17:299] : TYPE_WPARAM_UPGRADE_ERROR
[23:14:17:299] : žÞœÃÁö ºž³¿ - TYPE_WPARAM_UPGRADE_ERROR Error Code = 4008
[23:14:17:361] : Log finished
Click to expand...
Click to collapse
I've tried to reflash, but nothing happened even shaking the pc, then i've disconnected the phone and unplugged the battery pack. From that moment my phone is officially 'dead' no key combination seems to work, no usb connection, no signal.
Now what are your suggestions?
BACK + VOLUMEN UP + POWER... you can get EMERGENCY MODE... Then use KDZ
Stuck at fastboot mode Started udc start()
I was using
ROM : LG Icy Snap (4.0.4)
and wanted to update to 4.4.4 . Started the process normally .(i had previously tried the 4.4 kitkat by mukulsoni. which used the CWM 6..0.4 something like that)So updated my recovery .The recovery was fine but the volume buttons were not working so pressed the power button and i got a message saying that i would loose root access. i pulled out the battery and when i started it with the combo(Power+vol UP+ Home) i got the fastboot msg. i bricked my phone previously similarly but came out of it as my pc detected my mobile. Now it is not and when i try to launch that command to says waiting for device. Dunno what to do . I know LG P500 is a bit old but it is the only mobile i have :crying: .
Hello,
I have a LG p700 L7.
I wanted to do an update, and I do not know why but the phone is stuck on "emergency mode".
As soon as you start the phone, the screen yellow "emergency mode" appears.
And as it is impossible to install drrver "LG Mobile USB Modem", the phone is not recognized by any software.
Manipulation for Hard Reset I tried, does not work.
Can you help me please?
I did not find anything about it on XDA.
gomgom42 said:
Hello,
I have a LG p700 L7.
I wanted to do an update, and I do not know why but the phone is stuck on "emergency mode".
As soon as you start the phone, the screen yellow "emergency mode" appears.
And as it is impossible to install drrver "LG Mobile USB Modem", the phone is not recognized by any software.
Manipulation for Hard Reset I tried, does not work.
Can you help me please?
I did not find anything about it on XDA.
Click to expand...
Click to collapse
Please Help Me !
OK,we really can't help you until you tell us what exactly you did.You sound like you were thinking about an update and you found your phone in emergency mode.
SunnyChrono6 said:
OK,we really can't help you until you tell us what exactly you did.You sound like you were thinking about an update and you found your phone I. Emergency mode.
Click to expand...
Click to collapse
I wanted to update because my phone said me that an update was available. So I connected the phone to the computer, the software LG began updating. Once completed, the software shown me that everything was OK and that the update was completed successfully.
Unfortunately my phone it was stuck on this background yellow with "Emergency Mode!"
That's what happened
Was this when the phone was still connected to the computer or after you disconnected it?
SunnyChrono6 said:
Was this when the phone was still connected to the computer or after you disconnected it?
Click to expand...
Click to collapse
After I disconnected phone !
gomgom42 said:
After I disconnected phone !
Click to expand...
Click to collapse
Nobody know this problem ? And nobody expert too ?
Please...
gomgom42 said:
Nobody know this problem ? And nobody expert too ?
Please...
Click to expand...
Click to collapse
I'm waiting somebody can help me.. I don't know what can i do !
gomgom42 said:
I'm waiting somebody can help me.. I don't know what can i do !
Click to expand...
Click to collapse
Ok, nobody will help me...
So, i have a problem to install this driver : "LG Mobile USB Modem". That's why my PC don't recognize my LG Phone.
If i Can install this driver, i could install a new firmware. But I can't... Do you know why ??
I have the same problem. At the time of cwm installing, my phone rebooted on emergency mode yellow screen and cant open anymore. I use vol+ + power and the computer recognize my phone. I diasbled LGE modem and try to install v10A, V10C, v10g and v10h firmware every time it cant finish correctly and say
[R&D Test Tools Log File]
14:00:22 : Launching SW update
14:00:22 : Unpacking KDZ
14:00:37 : KDZ file extraced
14:00:43 : Files were extracted.
14:00:43 : LGMobileDL Load.
14:00:43 : Port = -1
14:00:43 : Connecting to phone
14:00:52 : Check Phone mode = 2
14:01:09 : Phone type check.......
14:01:15 : _DetachDLL Call
14:01:15 : _DetachDLL Call End
14:01:15 : Param : Path = D:\ProgramData\LGMOBILEAX\Phone\LGP705AT-00-V10c-TUR-XX-JUL-19-2012+0.dz
14:01:15 : Param : moduleDir =
14:01:15 : Param : waitTime = 0
14:01:15 : Param : UsbHighSpeed = 1
14:01:15 : Param : PhoneMode = 2
14:01:15 : Param : BinVersion = V10C_00
14:01:15 : Param : AuthMark = 0
14:01:15 : Call fn_StartUpgrade
14:01:15 : CDMA: wParam = 206, lParam = 0
14:01:15 : Model Dll Msg Not Found(206, 0)
upgrade error wParam:100 lParam: 1002
how can I fix this problem
drberkantkaya said:
I have the same problem. At the time of cwm installing, my phone rebooted on emergency mode yellow screen and cant open anymore. I use vol+ + power and the computer recognize my phone. I diasbled LGE modem and try to install v10A, V10C, v10g and v10h firmware every time it cant finish correctly and say
[R&D Test Tools Log File]
14:00:22 : Launching SW update
14:00:22 : Unpacking KDZ
14:00:37 : KDZ file extraced
14:00:43 : Files were extracted.
14:00:43 : LGMobileDL Load.
14:00:43 : Port = -1
14:00:43 : Connecting to phone
14:00:52 : Check Phone mode = 2
14:01:09 : Phone type check.......
14:01:15 : _DetachDLL Call
14:01:15 : _DetachDLL Call End
14:01:15 : Param : Path = D:\ProgramData\LGMOBILEAX\Phone\LGP705AT-00-V10c-TUR-XX-JUL-19-2012+0.dz
14:01:15 : Param : moduleDir =
14:01:15 : Param : waitTime = 0
14:01:15 : Param : UsbHighSpeed = 1
14:01:15 : Param : PhoneMode = 2
14:01:15 : Param : BinVersion = V10C_00
14:01:15 : Param : AuthMark = 0
14:01:15 : Call fn_StartUpgrade
14:01:15 : CDMA: wParam = 206, lParam = 0
14:01:15 : Model Dll Msg Not Found(206, 0)
upgrade error wParam:100 lParam: 1002
how can I fix this problem
Click to expand...
Click to collapse
You can try disabling this screen pressing Power button, Low Volume/High Volume (I don´t remember, but I think it´s Low button) and the Home screen button at the same time. If the screens get´s black, but after release it backs to the yellow screen, you guys will need to flash the phone again. Download the lastest firmwares for P700/P705 here: http://lg-phone-firmware.com/index.php?id_mod=13
Make sure your phones aren´t F or G variants, because my phone is internacional and I´m brazillian, so, when I try to flash a brazillian ROM, the phone simply get stuck on LG logo. Use KDZ to flash this, If the error persists, use another KDZ file, with another firmware, or another country.
---------- Post added at 01:09 PM ---------- Previous post was at 01:00 PM ----------
I saw that you setted the type to CDMA, and that´s wrong. Try to flash on 3GQCT option.
Junior...também sou brasileira e meu lg também é importado. No caso, quando for baixar a firmware, eu baixo mesmo assim a do Brasil e depois uso o KDZ pra tirar do logo da LG é? Por favor...preciso de ajuda.
Junior...I'm brazilian and my phone is internacional too. So, when i downloaded the firmware, i have to download the brazilian firmware then i use KDZ to fix the error with the LG logo? Pleaseeee..i need help
You cant flash a p705f firmware on a p700/p705 cell Phone. Brazil does have a diferent model for optimus L7 (p705f). My LG is imported too, so I cant flash a brazillian firmware because it doesnt works on another l7 models, i dont know why. But you can flash a P700 firmware on a p705, and vice versa.
Sent from my LG-P700 using xda app-developers app
my tablets a20 allwinner board `: s780I-v10
my touch has just got inverted .when i touch right side screen it goes left..i flashed the stock rom but still the problem exists..anyone look at the script file( attachments ) at tells me what to do...are touch screen drivers missing or not? confused
already converted from script.bin to script.fex
please help
or take look at this
[ctp_para]
ctp_used = 1
ctp_twi_id = 2
ctp_screen_max_x = 800
ctp_screen_max_y = 480
ctp_firm = 2
ctp_int_port = portH21<6><default><default><default>
ctp_wakeup = portB13<1><default><default><1>
[ctp_cfg_para]
ctp_cfg_used = 0
[ctp_list_para]
ctp_det_used = 1
ft5x_ts = 1
gt82x = 0
gslX680 = 1
gt9xx_ts = 0
gt910 = 0
gt811 = 1
gt818 = 0
ilitek_aimvF = 1
zet6221 = 1
Hi,
I can't find anything relevant on XDA for your device and issue. You will need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Hi. I think I might have toasted my s7 while trying to flash the firmware. I had loaded a combination file that got it into some sort of diagnostic/developer mode but nothing I did would get it out of that mode. so I tried again and now when I try to get it into download mode (sound down, home and power) I get the following
[ RST_STAT = 0x1000000 ]
EVT 2.0
ASV TBL VER = 10. grade = C
ASV TBL VER2 = 0
ETC : Paaa005q
LOT_ID = N4N2H
CHIP_ID = 07b5ce94b658
CHIP_ID = 0000000
MNGS:36'APOLLO:39'C G3D:39'C ISP:39'C
% 1 <5 P._ 'd h %! ? Ir : 0x8 '! f @ %! ?
% 1 <5 D ' ,_%!
any suggestions with this mess?