Related
Hi guys i'm pretty new in this scene and i did something stupid...
i've downloaded Win Mobile 6 from usenet and installed it without reading
anything. At 95% of the installation it hangs and when i try to recover it doesnt work. Now i only have the screen with the green red and blue at the background. I've tried a hard reset but that doesnt work either and i tried to search by google and found nothing.
Am i right that i had to remove some kind of G4 lock? And does somebody know how to help me getting things started again.....
thnx in advance.
greetz
JohnGotti
do your carriers flash and let it fully finish. Once thats done, read a little on making sure your device is unlocked and once you get that done, youll be ready to move to the next level.
what your device is g3 or g4?
how do i perform such a flash and how can i see what kind of G3/4 i have??
If you got a G4 or G3 IPL/SPL 2.x:
Try flasing wizard_love rom from the bootloader screen.
If you got IPL/SPL 1.x:
flash button_rom from the bootloader screen.
damn thats a whole mouth full and i dont get it how its intended.....
perhaps you can tell me in dutch or in a language a stupid fool can understand
JohnGotti said:
damn thats a whole mouth full and i dont get it how its intended.....
perhaps you can tell me in dutch or in a language a stupid fool can understand
Click to expand...
Click to collapse
See you're private messages!
ok thank you
i have the same problem..and i've tried all versions,RUU_mUn_aRTM_10_2_0_8_WWEx.exe, Wizard_Love_2[1].26.10.2_WWE_Novii_CF2.exe, Molski[1].Biz_AKU3.3_21911_8MB_Crossbow.rar...and now when i open it, shows me for 1 second the bootloader screen, and then it's shutting down himself..what should I do???
ady_uaic said:
i have the same problem..and i've tried all versions,RUU_mUn_aRTM_10_2_0_8_WWEx.exe, Wizard_Love_2[1].26.10.2_WWE_Novii_CF2.exe, Molski[1].Biz_AKU3.3_21911_8MB_Crossbow.rar...and now when i open it, shows me for 1 second the bootloader screen, and then it's shutting down himself..what should I do???
Click to expand...
Click to collapse
You should provide more information... What phone model is this? Is it a G3 or G4? What is your IPL / SPL? What did you do before this started happening? Was the battery fully charged before you started this process? Did your PC give you errors when you tried to do teh initial flash that started this process?
The more information you provide the better we can help.
If your phone won't stay turned on when its on the bootloader (rainbow screen) then either your battery is almost dead, or you may have bricked your phone. But we need more details.
this happened to me once, i almost had an heart attack.. but anyway.. what u get there is the bootloader mode, which is you can still save the phone.. when this happened to me, all i did was, i upgraded to original tmobile rom, and from there i ve used shell tool to upgrade to wm6 (my wizard is not unlocked but shelltool takes care of that and u dont have to worry).. its really easy.. let me know what happened.. no worries
Dont worry guys... I think most of us here, faced the same things before, Me included.
Everybody here is quite nice and will help u in any way we can..
Just do some research and fact finding before u flash your rom..
One of the article that I think is very helpful to me is Dr P post on how to unlock and flash your wizard.
If you have any problem or question after reading that, just ask.
Hopefully u can find your answer and your wizard are all healthy..
mfrazzz said:
You should provide more information... What phone model is this? Is it a G3 or G4? What is your IPL / SPL? What did you do before this started happening? Was the battery fully charged before you started this process? Did your PC give you errors when you tried to do teh initial flash that started this process?
The more information you provide the better we can help.
If your phone won't stay turned on when its on the bootloader (rainbow screen) then either your battery is almost dead, or you may have bricked your phone. But we need more details.
Click to expand...
Click to collapse
my phone is G4...first, when i tryed to change the rom, on 95% was blocked..and i have wait about 20 minutes, and nothing...the spl is....01...the battery was quite full, but after several tries, i don't know now how it is (i supose to be from the battery, but i still need a very good rom for it)
ok.. here are the steps.. its very easy.. i had the samething..
your phone is probably CID locked and you will need a shelltool to install that ROM.. so what you need to do is just download the original tmobile ROM.. and connect the phone and install the original ROM.. You didnt birck the phone because you get the bootloader screen.. which means, you can still save the phone..
anyway.. connect the phone via usb and install after you install the original wm5, download the shelltool from here and follow the instructions.. and install the ROM via shelltool.. Then you should be good to go with the new
wm6.
http://forum.xda-developers.com/show...ght=CID+unlock
ok, but where can i get that original rom?
rom
ady_uaic said:
ok, but where can i get that original rom?
Click to expand...
Click to collapse
if you cant get the tmobile rom
use the wizard love rom you can get it from here http://rapidshare.com/users/EXGZ7T
flash this rom not using the shell tool once flashed the use the shell tool following all the instructions and it should work
now i've installed RUU_mUn_aRTM_10_2_0_8_WWEx.exe (i've tried and that version also, but same situation) and after reflashing, it shows me windows mobile screen, and then restart the phone...what should I do??? i've tried many roms...could someone please give me an original rom, in english?
ady_uaic said:
now i've installed RUU_mUn_aRTM_10_2_0_8_WWEx.exe (i've tried and that version also, but same situation) and after reflashing, it shows me windows mobile screen, and then restart the phone...what should I do??? i've tried many roms...could someone please give me an original rom, in english?
Click to expand...
Click to collapse
Simple: Go to the Wizard Upgrading forum and in the stickies is a post by Dr. Putingham on how to CID Unlock your device. Scroll to the bottom of the first post and there is a direct link to pull the Tmobile 2.26 official ROM.
But as EasyMob suggested (and gave a link to) you may be better off with teh Wizard Love rom since you are a G4 device. Wizard Love ROM is very good at recovering G4 devices.
mfrazzz said:
Simple: Go to the Wizard Upgrading forum and in the stickies is a post by Dr. Putingham on how to CID Unlock your device. Scroll to the bottom of the first post and there is a direct link to pull the Tmobile 2.26 official ROM.
But as EasyMob suggested (and gave a link to) you may be better off with teh Wizard Love rom since you are a G4 device. Wizard Love ROM is very good at recovering G4 devices.
Click to expand...
Click to collapse
OK..I'm agree with you, but please understand: I've tried that version too...same situation...please give me the link with the Tmobile 2.26 official ROM
ady_uaic said:
please give me the link with the Tmobile 2.26 official ROM
Click to expand...
Click to collapse
If you read my previous post, I gave you exactly how to find the link (Hint, its in the first post of Dr. Putingham's sticky in the Wizard Upgrading forum and the title is about How to CID Unlock your device. Was that too hard?
i believe you, but i can't find it...and about 3 days i'm hopeless, because with any ROM version, the phone is still restarting, after reflashing (i didn't flash it with tmobile original rom)...please please, give me the link of the topic...
Hy everyone. I tried installing NBD 8.1, 8.2, and 8.3 on my phone today and it goes well. It says it has finished updating my phone and then when I start my phone, it says its being customized and I see everything being installed. After it is done installing, it resets. When it resets it is just the same old thing. It looks the same way it did when I first bought the phone. Im using a Cingular 8125 if it makes any difference. Thanks.
Your phone is still CID locked.
Follow this tutorial to unlock it, and follow the steps closely.
i wouldnt follow that tutorial just yet. You still need to give us a little more information like if your wizard is a G3/G4. You can only cidunlock your wizard if it is a G3.
I wonder why newbies are always told to CID unlock...
Shelltool works perfectly for flashing new OS (I flashed my CID locked G4 at least 6 times) and there should not be any risk of bricking the phone...
Mirek
mirekluza said:
I wonder why newbies are always told to CID unlock...
Shelltool works perfectly for flashing new OS (I flashed my CID locked G4 at least 6 times) and there should not be any risk of bricking the phone...
Mirek
Click to expand...
Click to collapse
I agree! I'd been flashing my G4 phone from about 5 months ago with different ROMs (almost continuously)... ShellTool is the best tool that I tried to flash ROMs without risk.
Cheers!
mirekluza said:
I wonder why newbies are always told to CID unlock...
Shelltool works perfectly for flashing new OS (I flashed my CID locked G4 at least 6 times) and there should not be any risk of bricking the phone...
Mirek
Click to expand...
Click to collapse
nobody bothers to read anymore and dont know what the search link looks like. The just jump on the bandwagon. But its true i had a hard time following some instructions but i got through it.
Really??
I used shelltool 2 times without problem, but then i get the 1 time a message - flashing done after 8 minutes and the flash wasnt really on the phone. Since then i use RUU (which is in the love wizard rom package) and it works for me.
Today i tried flashing nbd 8.3 to faria aku 3.3 and other faria rom with aku 4. In both casec the flashing stoped at 99% and i had to reflash it with nbd rom.
The flash didnt end , cause i have cid-locked phone?? I would like to have a newer aku(i have 2.3). HELP
I used Shelltool to install the rom I had. It finished after about ten minutes, and then I hard reset my device.
Whenever I start my phone up now it just hangs on the Cingular start up screen and this is what it says.
IPL 2.25
SPL 2.25
GSM 02.25.11
OS 6.6.6.666
Any idea what went wrong or if there is any way to fix this?
Thanks
Are you using Vista?
Nope. I used Windows XP Pro.
I had the same problem with shelltool on xp pro sp2. Get the phone in bootloader mode and flash again. Maybe with RUU , which is in the wizard love rom package. Just replace the .nkb file (rom file) to one u want.
I don't like this topic name. It should be: "I don't know how to install new rom"
A few advices from long time shelltool user
(I used it to flash "faria real thing", several version of "crossbow reloaded", "xda mobile", "pandora", "wrcx3"). I am on a locked G4 phone.
a) I always start by flashing the original ROM of my provider (in my case T-Mobile CZ) in normal way. This may not be a needed, but I read that it is *recommended*to flash your provider's ROM to have some stable base. It takes about 10 minutes or so.
b) Afterwards I flash using shelltool (see shelltool documentation how it is done)
Possible problems with shelltool
a) It does not end and the flashed phone seems to be frozen (clock is not updated etc.):
No problem, flash is done. After 30 minutes from the flash start just take your phone, do the hard reset and everything will work ok.
This (shelltool not ending) happens often, but as I said - it is no problem.
b) The wrong flash
Either the shelltool is interrupted prematurely or it the phone freezes during restart afterwards.
No problem, just reflash your provider's ROM in normal way and try again shelltool.
This happens only very rarely and I never went through this more than once.
Conclusion
Since the shelltool is limited to flashing only OS, you should not ever brick your phone in this way... The most you can do is to screw up your OS - which can be quickly recovered by flashing the official ROM from your provider.
Flashing by normal way is more dangerous: if you flash a locked phone with the ROM containing more than just OS, you can easily brick your phone (if you flash ROM just with the OS you will wonder that nothing has changed - at least this is like I understand it).
Mirek
zoki said:
I don't like this topic name. It should be: "I don't know how to install new rom"
Click to expand...
Click to collapse
I have to agree with you Zoki. Has nothing to do with your ROM.
zoki said:
I don't like this topic name. It should be: "I don't know how to install new rom"
Click to expand...
Click to collapse
I'm sorry. I didn't mean to offend you or anything. I just thought I did it the right way the first time and that something went wrong but not on my part because I followed directions doing it. I'm not saying anything bad about the rom. Sorry!!
I'll try to do it with the RUU then. Thanks a lot.
I have problems to use the Hard-Spl v1. I have a new HTC-Kaiser from T-Mobile. I start the Application HARD-SPL (I want to upgrating with Dutty´s ROM)
I run the kaiser-hardSPL.exe on Computer (PC)
I follow instructions on screen!!!!!
on the mobile i the question to start the applikation i answer Yes and then i get a with screen on the HTC Kaiser. NO tri-color-screen !!!
Please help, thx
Thomas
Thomas_Germany_Hamburg said:
I have problems to use the Hard-Spl v1. I have a new HTC-Kaiser from T-Mobile. I start the Application HARD-SPL (I want to upgrating with Dutty´s ROM)
I run the kaiser-hardSPL.exe on Computer (PC)
I follow instructions on screen!!!!!
on the mobile i the question to start the applikation i answer Yes and then i get a with screen on the HTC Kaiser. NO tri-color-screen !!!
Please help, thx
Thomas
Click to expand...
Click to collapse
From what I've read you need to remove your sim card and your microsd card then try again
There is no simcard and microsd in the htc Kaiser.
on the HTC Kaiser is the original T-Mobile software, nothing else
Perhaps your problem is related to new SPL... take a look at http://forum.xda-developers.com/showthread.php?t=349476
Cheers.
When your phone is booting up, look in the lower right corner. If you have a line that reads:
D 1.57.00.00
Then you most likely have the issue in the thread mentioned by jcespi2005. If you have:
D 1.56.00.00
Then its probably something else (as 1.56.00.00 should be able to do the HardSPL).
Why not flash the old SPL to the device then you can use Hard_SPL. I havent checked but arent there original ROM available(of course CID/carrier specific) from before 1.57.
wpbear said:
Why not flash the old SPL to the device then you can use Hard_SPL. I havent checked but arent there original ROM available(of course CID/carrier specific) from before 1.57.
Click to expand...
Click to collapse
The real problem is SSPL used to flash HardSPL is not working with this one, so you can't go back to previous SPL... don't know what shipped ROMs are out that allows flash over this SPL...but perhaps this can be a way to go...
Cheers.
The Rom of my Phone is d.1.56.00.00 !
I do a hardreset, but Hard SPL dont work!
well... for the Tilt you can't flash the "official" ROM back to the device because of an "Invalid Vendor ID", I'm not sure why this is but it just doesn't work. You can however flash the AKU0.4.4 ROM to an unmodified Tilt so the CID apparently is good on that ROM. However I've done this and it does not fix the "white screen" issue on the affected devices.
sirsycho said:
well... for the Tilt you can't flash the "official" ROM back to the device because of an "Invalid Vendor ID", I'm not sure why this is but it just doesn't work. You can however flash the AKU0.4.4 ROM to an unmodified Tilt so the CID apparently is good on that ROM. However I've done this and it does not fix the "white screen" issue on the affected devices.
Click to expand...
Click to collapse
oh well it was an idea. Another reason for me to put off the Tilt purchase.
wpbear said:
oh well it was an idea. Another reason for me to put off the Tilt purchase.
Click to expand...
Click to collapse
I might be returning mine because of this. Bummer.
hey Guyz. I have a Tilt that a customer gave me that got bricked while trying to flash one of dutty's roms...Problem is that the genius didn't load up Hard SPL even tho he told me that he did...now He wants me to fix it...even tho he didn't follow my instructions and read the WiKi...I kno that on the Hermes it was able to be unbricked. Is the same for the Kaiser possible? I would greatly appreciate your help as my customers are loving the work you guyz do here in nyc..
Thanks in Advance!
Cristian
What is the current status of the phone?
Can you get into the bootloader at all?
If you can get to the bootloader you should be able to load the AT&T AKU v0.4.4 ROM (the unoffical upgraded AT&T ROM). Once you get that loaded you should flash HardSPL immediately.
Let me know how it goes...
Cheers.
I bricked my tilt when it was less than 24 hours old... I recovered it with a BETA of the ATT rom and THEN redoing the hardspl thingy - worked a treat.
Do a search for tolt bricked and you should find afew threads for it.
The rom is called something like RUU_Kaiser_ATT_WWE....._Internal.exe
It goes to the Tri-Color Screen but stays there..I'll go ahead and research it so I can find the original AT&T and load it up...It shows a lot..workin for at&t and being a member on xda...U guyz have no idea how ya make life easier for my tilt customers b/c at&t truly dropped the ball on the rom...and by offering alternatives..u make the user experience so much better...thanks!
HTCFAN0923 said:
It goes to the Tri-Color Screen but stays there..I'll go ahead and research it so I can find the original AT&T and load it up...It shows a lot..workin for at&t and being a member on xda...U guyz have no idea how ya make life easier for my tilt customers b/c at&t truly dropped the ball on the rom...and by offering alternatives..u make the user experience so much better...thanks!
Click to expand...
Click to collapse
If you are at the bootloader screen (Tri-Color) then the phone is not bricked. In the sticky at the top on how to revert back for warranty replacement, it has links for the various roms. Just flash an official AT&T rom on it and you should be good to go. Then do the HardSPL.
Cool that you work for AT&T and hang out here! If you have any other warranty returns, I can give you my address as I wouldn't mind having a backup or two...
BTW: The AT&T ROM for the Tilt is actually quite good in the big picture of things. At least the phone is usable (slower than it should be and less memory than it should have, but its still very usable and stable on the official rom). If you want to ***** about official roms, go back to the 8125 and its official rom. The while the device (at the time) was great, that rom made the phone almost worthless (super slow, battery problems, bad radio, dropped calls, freezing, etc). I can't tell you how many people that run custom roms on the Wizard just can't believe what that phone is actually capable of.
Ok, sorry, got off topic there...
does Hard-SPL needs to be flashed just once on a device or does it need to be installed every tome a new ROM is going to be Flashed onto it?
mfrazzz said:
If you are at the bootloader screen (Tri-Color) then the phone is not bricked. In the sticky at the top on how to revert back for warranty replacement, it has links for the various roms. Just flash an official AT&T rom on it and you should be good to go. Then do the HardSPL.
Cool that you work for AT&T and hang out here! If you have any other warranty returns, I can give you my address as I wouldn't mind having a backup or two...
Click to expand...
Click to collapse
For some reason, it's not being recognized by my Activesync. I got it to recognize it but now it sayz Error 294: Invalid Vendor ID...I'm using the RUU_Cingular_WWE Rom for the Kaiser...so I'm flabbergasted at this point...
Quick Silver said:
does Hard-SPL needs to be flashed just once on a device or does it need to be installed every tome a new ROM is going to be Flashed onto it?
Click to expand...
Click to collapse
Only once! Than you can flash as much as you like!
HTCFAN0923 said:
For some reason, it's not being recognized by my Activesync. I got it to recognize it but now it sayz Error 294: Invalid Vendor ID...I'm using the RUU_Cingular_WWE Rom for the Kaiser...so I'm flabbergasted at this point...
Click to expand...
Click to collapse
ActiveSync will not recognize your device when in BootLoader mode!
The Vendor ID error means the ROM cannot be loaded on the Tilt without HardSPL. You need an original Tilt ROM. (That's what I think about this)
HTCFAN0923 said:
It goes to the Tri-Color Screen but stays there..I'll go ahead and research it so I can find the original AT&T and load it up...It shows a lot..workin for at&t and being a member on xda...U guyz have no idea how ya make life easier for my tilt customers b/c at&t truly dropped the ball on the rom...and by offering alternatives..u make the user experience so much better...thanks!
Click to expand...
Click to collapse
Oddly enough the "Original" Tilt ROM will not install on a Tilt that does not already have HardSPL on it (to spell it out for you, the CID of the ROM does not match the Tilt's stock SPL). If you check the "reverting back" sticky you'll find all this info already, though it is deep in the thread.
The AKU v.0.4.4 ATT Beta ROM does have the correct CID and will flash on a stock Tilt. SO that is what you are forced to resort to at this point. Once you get the beta ROM installed you can (and probably should) install HardSPL.
After all that, if you decide you want to return or warranty the phone follow the "revert" thread to restore it to "stock" form.
Some additional notes on your problem...
ActiveSync will not connect in Bootloader mode (this is expected). You should see a device show up in Device Manager however, I can't recall the exact description however.
quick flash procedure:
put phone in bootloader
connect usb cable
install ROM
FYI, the problem may not be a bricked tilt... you could try Pof's fix which involves using MTTY.exe to boot the phone, depending on how your "customer" tried to flash it it may just need a kick in the pants to restore it. (search Pof's SSPL for the Kaiser thread for instructions, the thread was closed so you will have to look deep).
<climbing on my soapbox>
Lastly... your use of the word "customer" concerns me... are you charging people for the work you do to their phones? If so, do you donate to the people who make it possible? I'm probably just misunderstanding you, but if you're profiting from others work, perhaps you should contribute (especially if you're coming here to ask for help).
</climbing down>
Good Luck!
Cheers.
Customers as in I work for an AT&T corporate owned Retail location and they have bought Tilts from me. They kno my Tilt has been modded and they usually want to do the same. I don't charge them for doing mods to their Tilts. This still remains a community where we help each other and I cherish that. Greed has no place here.
as far as ur suggestions...It looks like I'm gonna be drunk @ 4am on XDA tonite...lol...
HTCFAN0923 said:
Customers as in I work for an AT&T corporate owned Retail location and they have bought Tilts from me. They kno my Tilt has been modded and they usually want to do the same. I don't charge them for doing mods to their Tilts. This still remains a community where we help each other and I cherish that. Greed has no place here.
Click to expand...
Click to collapse
That's cool... my misunderstanding then. Hopefully no hard feelings .
All in all it sounds like the guy wants a custom ROM so you should probably get the ATT Beta ROM and install that. And then install HardSPL.
Check Kyphur's second post in the thread below for the ROM you want.
http://forum.xda-developers.com/showthread.php?t=343198
Thanks for the info sycho...I'll get to it after work..
Good news! The AKU 0.33 worked! Thanks for ur help sycho!
how can i re-install the window? at tilt 8925
i have wm6.1
i want to reset it so the error message shud gone like Recover ?
@kaal,
It seems what you want to do is a HARD RESET. Please visit Kaiser Wiki and read through. You'll know your phone better that way.
@HTCFan & Sirsycho, Glad you both sort it out in the community spirit Cheers!
sirsycho said:
Oddly enough the "Original" Tilt ROM will not install on a Tilt that does not already have HardSPL on it (to spell it out for you, the CID of the ROM does not match the Tilt's stock SPL). If you check the "reverting back" sticky you'll find all this info already, though it is deep in the thread.
The AKU v.0.4.4 ATT Beta ROM does have the correct CID and will flash on a stock Tilt. SO that is what you are forced to resort to at this point. Once you get the beta ROM installed you can (and probably should) install HardSPL.
After all that, if you decide you want to return or warranty the phone follow the "revert" thread to restore it to "stock" form.
Some additional notes on your problem...
ActiveSync will not connect in Bootloader mode (this is expected). You should see a device show up in Device Manager however, I can't recall the exact description however.
quick flash procedure:
put phone in bootloader
connect usb cable
install ROM
FYI, the problem may not be a bricked tilt... you could try Pof's fix which involves using MTTY.exe to boot the phone, depending on how your "customer" tried to flash it it may just need a kick in the pants to restore it. (search Pof's SSPL for the Kaiser thread for instructions, the thread was closed so you will have to look deep).
<climbing on my soapbox>
Lastly... your use of the word "customer" concerns me... are you charging people for the work you do to their phones? If so, do you donate to the people who make it possible? I'm probably just misunderstanding you, but if you're profiting from others work, perhaps you should contribute (especially if you're coming here to ask for help).
</climbing down>
Good Luck!
Cheers.
Click to expand...
Click to collapse
Because of you folks and this thread, I have a working device as opposed to a paperweight...Thanks!!!
Ok, I'm kind of at my wits end. I've already bricked a Sprint Snap, and I'm trying to get HARD to display on my tri-color instead of 0000 before I try ookba's rom again.
But I can't. I've done everything correct. SDA application unlocker - auto.bat from the JockyW thread, JumpSPL and boot Rom Update Utility. Every time it goes to a 100%, but once I reboot and then hold volume down I still get
CEDA200
SPL-0.34.0000
MicroP-Willow#C (LED) v58B.
No luck. I've tried hard resetting my phone with brand new factory settings (my old 6.1 was heavily modded). I've tried XP and Vista. No luck. When I confirm jumpSPL my screen goes black. Then I run RomUpdateUtility while the screen is black. Is that right? Please advise me, I'd love to have 6.5 on my snap.
Please use the correct version of Hard SPL, suitable for your phone!(S 511). Above all use Jump SPL (depending on your SPL version) and follow the prompts in the DOS window. Just press space bar. On your phone, screen will turn black this is NORMAL!Then free to interact in any way with the phone and without disconnecting the phone from the PC will need to run Hard SPL.Again attention, according to your platform (S511).After all this if all is well you should install the favorite ROM .
Good Luck!!!
i have followed these steps
I have started the romupdateutility with the black screen and it completes to a 100 percent. however my tricolor splash screen doesn't change.
Strange ...Something is wrong there.Try on another PC, make sure Active Sync or Windows Mobile Device Center is working properly.But most importantly try another JumpSPL and HardSPL, those you have now may have errors or can be corrupt file.Had happened to me with my old Diamond.
what is supposed to happen?
The .0000 should say .HARD if the flash was successful right? If a phone is HARDSPL then it won't change after a hard reset right? I really can't get this to work... is there a newer jumpspl I should try? Everytime RomUpdateUtility completes with the black screen my phone reboots and nothing has changed
DAMN
I just bricked my second snap by trying a different version of JumpSPL, really really upsetting. I can't believe I did that again, all I wanted was my device to be HardSPL and now its a paperweight. UGHHHH no phone certainly isn't better than stock 6.1... I'm probably done trying to 6.5 this damn thing. I'm going to replace it and never mess with it again. Thank you for trying to help.
Sorry man, really sorry. And I agree with you, 6.5 is nothing better than 6.1 and I think so.I have 6.5 and do not see an obvious improvement or an addition to performance.Perhaps a higher consumption of resources.I think it depends on preference.In your case maybe not everything is lost.Read this very very very carefully: "Flashing and Unbricking your Maple" by Ookba.Even if they refer to Maple, can help you.Good luck!
yay!
After getting a new s511, I attempted this for the third time
Well, It worked like magic. .Hard is now visible on my tri-color screen. SO!
Now I can flash the ROM? Do I just turn my phone on to its homescreen and plug it in to run RomUpdateUtility? Any other precautions I should take?
@Johny, thanks so much man for all of your help i appreciate it.
Yes, theoretically should work without problems now.Turn on the phone then start running RomUpdateUtility. If Hard is visible, you are insured in case of failure to update the ROM. In my case...I did not succeed the first time this.Even if I did HardSPL, I could not install 6.5, an error occurs...All they have resolved JumpSPL.If you have problems post here. Good luck!
Johnny_BV said:
Yes, theoretically should work without problems now.Turn on the phone then start running RomUpdateUtility. If Hard is visible, you are insured in case of failure to update the ROM. In my case...I did not succeed the first time this.Even if I did HardSPL, I could not install 6.5, an error occurs...All they have resolved JumpSPL.If you have problems post here. Good luck!
Click to expand...
Click to collapse
salut Johnny . putem vorbi de telefon?
drc38 said:
salut Johnny . putem vorbi de telefon?
Click to expand...
Click to collapse
Please provide an english translation, since this is a english forum
Device Help
I have a HTC Snap 511 from a Wireless Carrier in Puerto Rico it works just as fine as Sprint's. Actually its the same phone under another carrier. I tried Updating the rom i got lucky it boots 6.5 but i downloaded the wrong rom because its for a GSM phone not CDMA now its asking me for SIM and i can't updated to the one it goes ( that i downloaded sometime later )... Tri-Color Says:
CEDA200
SPL-0.39.0000
MicroP-Willow#C (LED) v 58B
i tried putting the s511 Sprint ROM but says at upgrade communication error.
I think its because im downgrading roms?
CEDA is 2.00.XXXX
WILL is 1.50.XXX
Any comments are aprreciated.
PS-
SIM Failure
The SIM card is missing or is not valid.You can still make emergency calls if your service providers supports it.
--##_- 240x320 Fun! -_##--
Which Un RAR arhivator complete work on this device (Snap S511) ???
I`m test all and not working nothing. WM 6.5 and WM 6.1
Not description for Icons in the SYSTEM(WM 6.5) menu... Baaaaad.