I tried to install the following ROM: http://forum.xda-developers.com/viewtopic.php?t=22591&highlight=ftp+site
I did everything like the instruction said but after a few seconds of collecting data from my MDA, the program on the pc said "Country error 120".
What now? I'm trying to make my german MDA compact into an english one.
-John
This problem has been posted many times on this forum...
Anyway replace the 'ROMUpgradeUt' with 'MAUpgradeUt_noID' available here:
ftp://ftp.xda-developers.com/Magician/Tools
Also don't forget to disable the USB connection by right clicking ActiveSync and unchecking the box.
Disable USB? But if I disable the USB how can upload the ROM files to my MDA? I use a USB connection to connect the MDA to my pc.
-John
Trust me it will work- I only did it yesterday to upgrade my mates ROM to 1.12.
He tried to do it himself but it didn't work. When I did it, the only thing I did different was to disable the USB in Active Sync.
Try it and see if it works... its takes about 20 mins to perform the whole thing.
Not sure if I`m missing something but everytime I attempt to connect to the ftp server above (since I`ve got the same problem) I get "access denied" when I connect via ftp.
Not sure if I`m missing something but everytime I attempt to connect to the ftp server above (since I`ve got the same problem) I get "access denied" when I connect via ftp.
Click to expand...
Click to collapse
Make sure you change the login credentials in Internet Explorer; when you get the access denied message go to File> Login As and change the username xda and password to xda.
If that still doesn't work, use a FTP client software package- some people have reported to have problems with FTP when accessed through Internet Explorer.
Anyway replace the 'ROMUpgradeUt' with 'MAUpgradeUt_noID' available here:
Click to expand...
Click to collapse
Ummm... where do I put this file? I'm trying to run the exe file called "o2asia_11100_922_11100_ship" with the instructions I got from the link I posted on my first post.
I opened the exe file "o2asia_11100_922_11100_ship" with winzip just to see it's content and it has the "ROMUpgradeUt" file but if I replace it and try to run the exe I don't think it will work as the installer is looking for the original "ROMUpgradeUt" and not "MAUpgradeUt_noID".
That's why I wanted clear instructions because I really don't have a *** clue what I'm doing and I really really REALLY can't use the internet now very much as I can only visit off-work sites at my coffee breaks.
So please, help me, I have all the files now but I don't know what to do with them!
-John
Can't get it to work. Here's what I did:
Extracted all the files from "WWE_11200_128_11210_ship" into d:\mda
Did everything as stated here: http://forum.xda-developers.com/viewtopic.php?t=14973
But doesn't work. I does upgrade, but the upgrade takes like 10 seconds, then it says to cold boot the mda and after a cold boot it is back in German language.
What am I doing wrong? The .bat file I made does some changes and I am doing everything like the instructions say but something must be wrong here. Please help.
-John
Works now, well at least it is now upgrading so something must be rigt... now I just have to wait
And to contribute and help other newbies - The BEST instructions (in my opinion) are those from "NemesisDE" in this thread; http://forum.xda-developers.com/viewtopic.php?t=14973&postdays=0&postorder=asc&start=75
See pages 4 and 5. Read the instructions on page 4 and then see page 5 for further info = where to download the large rom file as it's been moved and also get the MaUpgradeUt_noID.
To clarify: After you have the ROM (I used WWE_11200_128_11210_ship), download also MaUpgradeUt_noID.
Then you can proceed with NemesisDE's instructions, they are VERY good. I had no problems converting my german MDA compact into english.
Now this is the type of information I should've gotten yesterday... but now it works, I'm happy.
Upgraded XDA2 running 2003 to an XDA Mini S running 2005. Programmes that I previously had running on 2003 (Amirsys/Elsevier -Pocket Radiologist series). Despite many suggestions and help from Elseviers techies in St Louis they now think it's an incompatibility that cannot be overcome. Has anyone any experience of patches etc or are these programmes now completely useless.
Having said that, I find the functionality of 2005 good with calls made and taken whilst running TomTom 5.21 - which is a vast improvement!
I think the only way is to watch out for a new version which is WM 5 compatible.
But I don't understand how u can make an XDA 2 to an XDA mini s with an rom upgrade? I think u mean something different.
cu
No. I've changed my XDA2 to an XDA Mini S (wizard) which is why I'm now using WM5. Kind of wish I'd stuck with WM3.
Looked in profiles but no option for newer phones
No. I've changed my XDA2 to an XDA Mini S (wizard) which is why I'm now using WM5. Kind of wish I'd stuck with WM3.
Looked in profiles but no option for newer phones
Hello k.griffin (& anyone else who is trying to get the Amirsys soft running under WM5),
I have some "older" programs that won't run on my new Wizard as well (including your example of Amirsys Pocket Radiologist, and, e.g. a PPC dictation program). I think this is an issue for everyone trying to migrate software to WM5 devices, and it is primarily associated with the new flash architecture of WM5.
I posted some questions regarding the Pocket Radiologist software to Elsevier, too. They said a WM5 version is being prepared but nothing has happend for quite a while now.
Interestingly, I have read forum posts that claim that by chance some people had discovered this software (and several other programs that usually can't cope with the WM5 flash architecture) will run after installing the "Arabizer" suite. This is said to be associated with changes in flash memory handling when this peculiar package is installed.
So my question to everyone who is familiar with WM5 and its memory structure: how plausible is that (at the moment I am thinking of ~1% ) ? I am rather unwilling to check it out blindly, because I am not fond of getting into long hours of installing and uninstalling tools for arabic character sets [that I don't need..] in vain..
Can anybody provide some statements on that ?
there is a hack for pocketradiologist so it work with wm5,
let me search it in my harddisk and will post it,but its seem its illegal
Arabizer
I installed Arabizer, but it doesn't makes a difference !
Who has the magical hack or can fix it in the registry ?
IPAQ RW6815
help
pdafre4k said:
there is a hack for pocketradiologist so it work with wm5,
let me search it in my harddisk and will post it,but its seem its illegal
Click to expand...
Click to collapse
Can you say me if i can use pocketradiologist with wm5 and how ?
I'm in france but I love USA.
Tnx ([email protected])
Hey guys!
Send me that fix too please!!!
My email is [email protected]
See ya all
thank you all !
http://www.4shared.com/file/4123375/41e3e80e/pocketradiologist.html?s=1
at last found wm5 working version by ifalleni !
thanx for all the support folks.
When I try to install ADOCEforMIMSonPDA in the device or in the sd card says: "Failed to load resource DLL MSDAERES.DLL"
What can I do?
Tnhxs
jumanji1212 said:
When I try to install ADOCEforMIMSonPDA in the device or in the sd card says: "Failed to load resource DLL MSDAERES.DLL"
What can I do?
Tnhxs
Click to expand...
Click to collapse
AFAIK the file "MSDAERES.DLL" is part of M$ VB runtime for PPC.
I will try to install it on my PDA this afternoon and let you know.
cheers.
I was able to install pocket radiologist without any problem.
First I installed ADOCE.WM5.CAB, then READER APPLICATION.PPC_2577.CAB and CHEST 100.PPC_2577.CAB.
It's quite good except the radiographs are quite small on PDA screen.
What operating system is on your PDA?
cheers.
ttangcho said:
I was able to install pocket radiologist without any problem.
First I installed ADOCE.WM5.CAB, then READER APPLICATION.PPC_2577.CAB and CHEST 100.PPC_2577.CAB.
It's quite good except the radiographs are quite small on PDA screen.
What operating system is on your PDA?
cheers.
Click to expand...
Click to collapse
Hi ttangcho,
thanks for replying. My operating system is WM5. My pda is a qtek 9000 with Spanish Rom. I tried making a soft reset before installing it, and later I tried a hard reset getting the same message in both actions.
I first tried to install ADOCEforMIMSonPDA from WM5 file but i got that message. So couldn´t keep on going.
What would you recomend me?
Thanks in advance buddy
jumanji1212 said:
Hi ttangcho,
What would you recomend me?
Thanks in advance buddy
Click to expand...
Click to collapse
I'm using WM5 WWE and I installed it after hard reset.
Try to install Ms VB Runtime on your device first. This VB runtime includes "MSDAERES.DLL". I hope this work. By the way, I installed it successfully without VB runtime.
cheers,
ttangcho said:
I'm using WM5 WWE and I installed it after hard reset.
Try to install Ms VB Runtime on your device first. This VB runtime includes "MSDAERES.DLL". I hope this work. By the way, I installed it successfully without VB runtime.
cheers,
Click to expand...
Click to collapse
I´ve got an error message when i install th Vb runtime too.
This is amazing!!! DOn´t know what to do
Any idea?
ok, now vb runtime is installed on my device in the main memory without any problem. I have also installed adoce without any problem on my sd card, but i cannot find the adoce files as a program or even in the file explorer.
do i need to install any of the modules first and then substitute by the crack file?
thanks for all your help guys
jumanji1212 said:
ok, now vb runtime is installed on my device in the main memory without any problem. I have also installed adoce without any problem on my sd card, but i cannot find the adoce files as a program or even in the file explorer.
do i need to install any of the modules first and then substitute by the crack file?
thanks for all your help guys
Click to expand...
Click to collapse
Good to hear that you were able to install the program. VB runtime is way too big to put in the main memory. If you want to install VB runtime on the RAMdisk or SD card, do the followings.
1. Create "\RAMdisk\Windows" directory
2. Open your reg edit program and add \RAMdisk\Windows\ in the SystemPath
[HKEY_LOCAL_MACHINE\Loader]
"SystemPath"=\RAMdisk\Windows\ \Windows\..............
(Note. this is Multi_SZ)
or you can cut and paste the following and add to your registry.
----------------------------------------------------
REGEDIT4
[HKEY_LOCAL_MACHINE\Loader]
"SystemPath"=hex(7):5c,5c,52,41,4d,64,69,73,6b,5c,5c,57,69,6e,64,6f,77,73,5c,\
5c,00,5c,5c,77,69,6e,64,6f,77,73,5c,5c,6f,65,6d,5c,5c,00,5c,5c,52,65,6c,65,\
61,73,65,5c,5c,00,00,00,00
----------------------------------------------------
3. Soft Reset using SOFTWARE or power off and on couple of times and soft reset using your stylus.
4. Install VB run time on your RAMdisk.
This is how I did in order to install VB Runtime (3MB) and M$ .NET Compact platform 2.0 SP1(2.2MB) on the RAMdisk.
Cheers!
TTangCHo
thanks you all buddies, it worked, at the end, but worked!!!
now i can go with all pocket radiologist on my handheld device, it´s really amazing!!!
see ya in another life brother
lipe said:
http://www.4shared.com/file/4123375/41e3e80e/pocketradiologist.html?s=1
at last found wm5 working version by ifalleni !
thanx for all the support folks.
Click to expand...
Click to collapse
Hi, the link is not working any more,.
any one who can upload it again please, or another link to download it,,???
SORRY: wrong titel!! translation: upgrade to WM6 using Windows VISTA!!
Hi!
i am a newbe but i informed me since 1 week and so i want to give WM6 a chance.
i am trying to upgrade my qtek s200(HTC prophet) G4 to WM6 smartv1.3.
first of all i am using the following helps:
http://forum.xda-developers.com/showthread.php?t=308755
i try do us:
RUU_Prophet_220734_2207114_024721_NVID
to upgrade my mda. but i get always the same error:
ERROR [248~260] : UPDATE ERROR
by using the readme.txt i can only find the following info: pls restart mda and pc. i did both but i still get this error
i guess its because i use vista and i jump over the step : install active sync 4.5 (this is not possible in vista)
has any one an idea or has someone experience upgrading his htc prophet from WM5 to WM6 on WINDOWS VISTA?
thanks for help!!
flo
P.S.: i tried di kill all process including deactivating firewall and viren scanner. i also tried to close the securite center (is not possible)
nothing helped!
P.P.S.: i searched in google and i found out, that some people have successfully upgraded their mda on vista(but it was an other device)
P.P.P.S.: i also found an RUU on http://205er.de/ppc.htm but he confused me. he uses also a s200 device BUT the RUU is not for s200 (i am guessing, because their is another picture at the upgrade routine )
please yous forums search ... you can found a lot of hits her!!
**** sorry netrunner
if possible delete this thread please!
for everyone who has the same problem..
try this:
http://www.modaco.com/index.php?showtopic=252977
but i noticed, that it doesn't work for everyone!
if this happens also to you
FORMAT C: DELETE this **** vista... nothing works anymore on this OS except the graphical stuff
Hi at all,
i saw your thread to update the MDA2 to Windows Mobile 5. I downloaded the file from rapidshare and followed the readme. In one step the readme says that I should connect the MDA with the PC over USB and run the programm "HimaUpgradeUt_noID.exe", so I did. The programm brings error 102: Checksum Error, but I followed the steps in the readme...
What am I doing wrong? Which checksums aren't correct? The sums of the new ROM or the old one?
Thanks for help!
PS: Sorry for my bad English, but I'm not a native English speaker ;-)
the text file i got in my rom packet told me very spc to put my pda in the bootloader before running the flash upgrade
Thx for your answer!
Yes, but I don't exactly want to do, first I have to change the Checksums, then I have to put the MDA in the bootloader mode and then? What should I do then?
Sry, but this is the first time, I do such a thing
if it's the correct type of rom for the device
and it's in bootloader
connected to a powered cradle
and displaying serial
as the txt guide say
starting the flash tool should be enough
hm...
this doesn't work...
I don't know exactly weather this is the right version, my MDA II has
- 125MB RAM
- 2GB SD Card
- Intel PXA263
I downloaded following: http://forum.xda-developers.com/showthread.php?t=287941
Is this the right version?
http://www.buzzdev.net/index.php?option=com_phorum&Itemid=125&phorum_query=read,26,6594
good guide
Everything works!
Thank you very much! The version is very good, with a lot of useful programs, but the American keyboard layout is a bit strange for Germans ;-)
Hi
I have still some problems...
My MDA doesn't connect with the network, so that I am unable to phone or send SMS. The displays shows "no service", but this isn't possible, because here is a service avalible. Are there some special setting I have to do for German use?
Thanks!
EDIT: When I tap "find network" there is an option to choose "E-Plus" (my network), but when I tap OK, there is a message "registering with network" but in the end it is still "no service". I don't know exactly but I guess that it has something to do with my debitel-light prepaid-card. Debitel-light is a kind of E-Plus resell.
Newbie question:
I've noticed that MaUpgradeUt_noID.exe program as found in http://vidmes.com/xda/Uni/Radios/Universal_radio-1.15.00.rar does not require to have Activesync installed.
However, ROMUpgradeUt.exe program (the one included in excellent Tomal's ROMs) does require to have Activesync installed. If not, you get a "rapi.dll not found" error.
Both programs seem to work with my SPV M5000 (I have made a couple of flash operations with them, both Radio and ROM).
I don't like to have Activesync installed, so my question is:
Is it OK to understand that it is safe to always use MaUpgradeUt_noID.exe instead of ROMUpgradeUt.exe when upgrading to newer HTC Universal ROMs. (specially with Tomal's ROMs)?
Thanks.
Please, confirm
Please, confirm if is it fine to always use MaUpgradeUt_noID.exe instead of ROMUpgradeUt.exe when flashing new ROMs. I want to flash from a PC without Activesync installed, and thus ROMUpgradeUt.exe is discarded.
Thanks in advance.
Put the device in serial mode, and use MaUpgradeUt_noID.exe
uni_user said:
Please, confirm if is it fine to always use MaUpgradeUt_noID.exe instead of ROMUpgradeUt.exe when flashing new ROMs. I want to flash from a PC without Activesync installed, and thus ROMUpgradeUt.exe is discarded.
Thanks in advance.
Click to expand...
Click to collapse
Hi i did read somewhere that MaUpgradeUt_noID.exe is not safe but don't really know the reason...
Win_XP said:
Put the device in serial mode, and use MaUpgradeUt_noID.exe
Click to expand...
Click to collapse
oh really genius ? ! wow! damm, but VOILA! its a darn broken link with a missing RUU.dll gosh ! what say genius ? now what ? LOL!
Have you noticed this thread is more than one year old
Please let us know exactly what you need so we can help you find your way
r.davare said:
oh really genius ? ! wow! damm, but VOILA! its a darn broken link with a missing RUU.dll gosh ! what say genius ? now what ? LOL!
Click to expand...
Click to collapse
I need a proper link please for MaUpgradeUt_noID.exe
I got one but after going through the procedure to the book, I just managed to come back to WM 2003 SE