Hi, does anyone know the workaround or a fix for the pocketbreeze and keyguard issue?......basically when pocketbreeze is on my today screen the keyguard function does not work/activate......but when i disable or take off pocketbreeze from the today screen then the keyguard works as normal.......i know its the pocketbreeze issue coz i have tested all my third party apps and this is the only program thats stuffing up the keyguard function.....the issue is in both WM5 and WM6 roms by the way.....
if there is no workaround or fix to this.....what is another app that works just like pocketbreeze.......thanks in advance
nevermind, i actually found the solution as per link below.....all i need to do was to put the gsget.dll on the windows directory and reset.....also need to install the most recent version of pocketbreeze for the dll file to work......as it doesn't work on old version of pocketbreeze
http://discussion.treocentral.com/showthread.php?t=141003
Related
Hi,
does anyone here use the TodayAgenda tool on the Touch Pro? I wonder if this is useful as it runs on the Today screen but does not fit into the TouchFLO3D ... Is there a good calendar tool already installed on Touch Pro? I am used to TodayAgenda on my HTC Wizard ...
Cheers,
Eriol
if touchflo is running on the today screen, no other today application can be used / displayed. However, by using an application called secondtoday (google it) you can have a second today screen, with all your usual today apps running. Switching between the two today screens can be done with a soft key - there is another app on the same site that sets this up for you - it replaces the phone soft key on the homescreen with secondtoday.
I use pocket informant which provides much better calenders, contact lists etc.
I don't use TodayAgenda, but I do use SPBDiary running on a SecondToday screen. It works very well switching between TouchFlo3D and the classic looking Today screen.
I also run a number of other Today Plugins in this screen provided by SecondToday e.g. PhoneAlarm and PocketWeather.
Eriol said:
Hi,
does anyone here use the TodayAgenda tool on the Touch Pro? I wonder if this is useful as it runs on the Today screen but does not fit into the TouchFLO3D ... Is there a good calendar tool already installed on Touch Pro? I am used to TodayAgenda on my HTC Wizard ...
Cheers,
Eriol
Click to expand...
Click to collapse
I've been using TodayAgenda with SecondToday since getting my Pro.
The flipping between TouchFlo and TodayAgenda works perfectly and there's no lag.
With VGA its possible to cram a lot of info on to the screen and still being legible.
Best solution I've seen so far to make up for the limited number of diary entries on the TouchFlo Todday screen. (Plus it's free!!)
Would be nice if TF3D can be hacked to add a tab that shows a selected Today module
absolutely. really need this.
I do
I use it on the second today screen. I'm unable to map a soft key to second today on the primary today screen though.
Hi,
someone can hel me to see the active tasks in TODAY of TouchFLO?
Now I can see only Time, calendar and calls..
I try to set the tasks in START-SETTING-TODAY-ELEMENTS but nothing.
Thanks in advance.
Hi,
I have the same problem. But no solution
Tasks Touch LO
A simply way to it's to sobstitute calendar with tasks activity.
But how?
I try to use advance config tools secion TouchFLO 3D but no sets are here for my problem.
????
No other Today plugins/items can be used if TF3D is activated.
Until someone works out how to add task to TF3D itself (I assume by editing the XML bits of manilla) you will not be able to do this.
What would be really useful is if someone figured out how to add a Tasks tab to TF3D and also a Calendar tab too (I know there is one but I don't think it shows highlights on days with appointments etc).
People are working on these things so I tihnk there will be a solution down the road.
TF3D
So to solve the only way is to disable TF3D.
No solucion installing SPB Mobile shell o similar becouse with TF3D active it's impossible to add Tasks in Today Screen too.
Many thinks to solve
It's incredible you buy a terminal It's cost 800€, and you have to put a cab to fix double contact SIM and Cellular, You can't display the active tasks..., ....!!
But the ingeneers are tested this, or the most important think is to have a good weather tasks?
Bho!?
I have been searching for a Touchflo Tasks tab also with no luck. My best solution thus far as been to remap my PTT button to my tasks. This definitely isn't too bad to work with. I use NATFs ROM on my Fuze which already has remapping tools but you can use fuzemobility.com and search for PTT remap if you need.
why dont you try that tf3d disabler that lets you switch between tf3d and standard today screen plugins? simple click of a soft key and your back and forth between the two.
The Jack of Clubs said:
why dont you try that tf3d disabler that lets you switch between tf3d and standard today screen plugins? simple click of a soft key and your back and forth between the two.
Click to expand...
Click to collapse
That would be your best bet IMO.
install secondToday, map that app to the PTT button or some other hard key, and you can easily have an alternate today screen for expanded agenda and tasks. By installing SecondToday, you can have all of your plug-ins right at hand... and get to them from anywhere in the device.
It's the best of both worlds. Really.
Does anyone know if the newer versions of Touch Flo 3D will allow other Today plug-ins ? Such as Tasks, etc?
I just started using MTP (Manilla Today Page) and it's incredible.
Just what I needed to put SPB Diary as it's own tab in TF3D.
I couldn't use TF3D for months till i got this working, and i gotta say, it's gorgeous.
what is Manila Today Page?
Any update with the Tasks Tab?
Now with the new HTC HD2 - I think that TouchFlo is finally a decent replacement for SPB Mobile Shell.
However, I still miss the Tasks window to complete the tabs list...
I've noticed lately that when the screen switches orientation the app changes. It will go back to the home page(TF3D) or maybe the dialer. Then if the orientation switches back then the original app will redisplay. After I first reboot it doesn't occur. Something is triggering it, but I haven't figured out what just yet.
Has anybody else run into this issue? I thought maybe it was something I installed, but I've tried uninstalling several things and it still occurs.
I'm running the upgraded AT&T rom on my fuze.
Software:
i-nigma
G-Watch
Ticker Tape
Total Commander
KeePassPPC
Google Maps
HTC Application Service
NetCallerID
Colored Top Bar
.Net CF 3.5
Bing
Facebook
Radar Watch 2
Netflix
FuzeBerry
AppToDate
NoCurtains
Media Center for Windows Mobile
Opera mobile
PHM Registery Editor
Weather Watcher
Any thoughts or suggestions would be appreciated.
bump. any thoughts anybody?
I've had a lot of issues with the screen constantly rotating on my fuze when i slide the keyboard out. Goes all the way from Monx>Pfcsabre>At0mAng and even self cooked roms in Da_G's kitchen. I never install any kind of g-sensor applications either. All i do is use the default calibrator.
A soft reset seems to fix it for a bit but before long it shows again. It's very frustrating while trying to type an sms/email and it keeps rotating from portrait to landscape.
I've tried to search for it...but if you put in g-sensor or screen rotate all ya get are apps. Has anyone else encountered this before?
Thanks
venelar said:
I've had a lot of issues with the screen constantly rotating on my fuze when i slide the keyboard out. Goes all the way from Monx>Pfcsabre>At0mAng and even self cooked roms in Da_G's kitchen. I never install any kind of g-sensor applications either. All i do is use the default calibrator.
A soft reset seems to fix it for a bit but before long it shows again. It's very frustrating while trying to type an sms/email and it keeps rotating from portrait to landscape.
I've tried to search for it...but if you put in g-sensor or screen rotate all ya get are apps. Has anyone else encountered this before?
Thanks
Click to expand...
Click to collapse
I did encounter with At0mAng's new ROM...... its too much in convenient that's why changed to my own build ROM. Its some thing to do with gsensor pack used or some drivers used from Diamond ROM( I cook my own ROM in AtOmang's kitchen)
Seems like u have Gyrator installed.... I use Energy Rom and it only rotates to the default orientation when the keyboard slides out... and exception of the new opera...
Package/Application [OEM]
Some applications, such as Opera, handle Rotation internally ... have a look at the .REG/.RGU as well as the .INI file(s). Also verify the OEM .PROVXML's asa some of them include changes to Opera behaviour.
As for other rotation in other applications, G-Sensor (aka Sensor SDK 4.0) provides the abilitiy to configure White/Black list entries. If you look at the G-Sensor 4 package I posted to the OEM Repository (4Shared), you will find a .PROVXML that allows you to quickly define entries for both lists.
The original values for the entries in the .PROVXML are found in the .REG/.RGU file.
HTH,
hilaireg said:
Some applications, such as Opera, handle Rotation internally ... have a look at the .REG/.RGU as well as the .INI file(s). Also verify the OEM .PROVXML's asa some of them include changes to Opera behaviour.
As for other rotation in other applications, G-Sensor (aka Sensor SDK 4.0) provides the abilitiy to configure White/Black list entries. If you look at the G-Sensor 4 package I posted to the OEM Repository (4Shared), you will find a .PROVXML that allows you to quickly define entries for both lists.
The original values for the entries in the .PROVXML are found in the .REG/.RGU file.
HTH,
Click to expand...
Click to collapse
That the frustrating part. It does it without being in an app. I can have the phone sitting with nothing running and just showing the tf3d screen..slide out the keyboard and just watch it switch back and forth
venelar said:
That the frustrating part. It does it without being in an app. I can have the phone sitting with nothing running and just showing the tf3d screen..slide out the keyboard and just watch it switch back and forth
Click to expand...
Click to collapse
Rotation for Phone Canvas and Manila are also definable entries in the White/Black list for G-Sensor 4.
If you're up to it, download the WinMO 6.1.21051 kitchen (and packs) and cook a ROM with the 21051_Test_ERV_Profiles.zip - use the thread paperclip to locate the attachment. It's the ROM profile that I currently use for my device.
The Manila version is 1.2.35845.1_1813.6; Landscape should display and 8 button selection page. If you experience erratic behaviour, it could indicate a hardware related issue.
HTH,
hey,
I have a Touch Pro, and I tried some ROM's but it seems that the autorotate function never works. I can't find it in the settings. Is there a tool to fix this or what do you recommend to do.
Somebody knows a ROM that doesn't have this problem.
grettz
esmo
Check my signature for my preferred ROM of choice.
NOTE ::
If you have tried ROMs that include Flip-It or BSB G-Config, and you want the rotation, do not, I repeat, DO NOT clean your Invalid Registry Values or Invalid Registry Keys with ClearTemp, SKTools, or Pocket Mechanic. I can verify that all of these "cleaner" apps will, by default, delete the Rotation Registry String... unless you manually Ignore the Rotation Keys.
I prefer Auto-Rotation to be off, beings that I usually have my Fuze in a Belt Pouch [Landscape Orientation]. Slide-Out rotation ftw!
esmo said:
hey,
I have a Touch Pro, and I tried some ROM's but it seems that the autorotate function never works. I can't find it in the settings. Is there a tool to fix this or what do you recommend to do.
Somebody knows a ROM that doesn't have this problem.
Click to expand...
Click to collapse
[HKCU\Software\HTC\HTCSENSOR\GSensor]
"AutoRotation"=dword:1
[HKCU\Software\HTC\HTCSENSOR\GSensor\WhiteList]
"Excel Mobile"="BOOKWIN"
"File Explorer"="FEXPLORE"
"Google Maps"="GoogleMapsMobile"
"Internet Explorer"="IEMobile"
"Resco Explorer 2010"="RESCO_EXPLORER_CLASS"
"Registry Editor"="RESCO_REGISTRY_CLASS"
"Tom Tom Navigator"="MunichWinClass"
"Word Mobile"="Pocket Word"
"Word Mobile"="WordPad"
I keep it off because with it on, the camera does not correctly rotate photos once they are taken.
I've included the SensorSDK 4.2 from the Rhodium S2 ROM in my newest ROM, but I replaced the HTCSensorService.dll with the 3.3 from the Touch Pro. Result? Nothing will rotate but Album (which I removed from the whitelist) because it handles its own rotation. GSensor calibrator works. Do I need a 3rd party program or what to get autorotation working in all programs with the Raph?
Lost
__________________
I've also posted this question in my ROM development thread here, but it hasn't had a single view today, so I'll take my flames as a former Mod