Hi,
someone can hel me to see the active tasks in TODAY of TouchFLO?
Now I can see only Time, calendar and calls..
I try to set the tasks in START-SETTING-TODAY-ELEMENTS but nothing.
Thanks in advance.
Hi,
I have the same problem. But no solution
Tasks Touch LO
A simply way to it's to sobstitute calendar with tasks activity.
But how?
I try to use advance config tools secion TouchFLO 3D but no sets are here for my problem.
????
No other Today plugins/items can be used if TF3D is activated.
Until someone works out how to add task to TF3D itself (I assume by editing the XML bits of manilla) you will not be able to do this.
What would be really useful is if someone figured out how to add a Tasks tab to TF3D and also a Calendar tab too (I know there is one but I don't think it shows highlights on days with appointments etc).
People are working on these things so I tihnk there will be a solution down the road.
TF3D
So to solve the only way is to disable TF3D.
No solucion installing SPB Mobile shell o similar becouse with TF3D active it's impossible to add Tasks in Today Screen too.
Many thinks to solve
It's incredible you buy a terminal It's cost 800€, and you have to put a cab to fix double contact SIM and Cellular, You can't display the active tasks..., ....!!
But the ingeneers are tested this, or the most important think is to have a good weather tasks?
Bho!?
I have been searching for a Touchflo Tasks tab also with no luck. My best solution thus far as been to remap my PTT button to my tasks. This definitely isn't too bad to work with. I use NATFs ROM on my Fuze which already has remapping tools but you can use fuzemobility.com and search for PTT remap if you need.
why dont you try that tf3d disabler that lets you switch between tf3d and standard today screen plugins? simple click of a soft key and your back and forth between the two.
The Jack of Clubs said:
why dont you try that tf3d disabler that lets you switch between tf3d and standard today screen plugins? simple click of a soft key and your back and forth between the two.
Click to expand...
Click to collapse
That would be your best bet IMO.
install secondToday, map that app to the PTT button or some other hard key, and you can easily have an alternate today screen for expanded agenda and tasks. By installing SecondToday, you can have all of your plug-ins right at hand... and get to them from anywhere in the device.
It's the best of both worlds. Really.
Does anyone know if the newer versions of Touch Flo 3D will allow other Today plug-ins ? Such as Tasks, etc?
I just started using MTP (Manilla Today Page) and it's incredible.
Just what I needed to put SPB Diary as it's own tab in TF3D.
I couldn't use TF3D for months till i got this working, and i gotta say, it's gorgeous.
what is Manila Today Page?
Any update with the Tasks Tab?
Now with the new HTC HD2 - I think that TouchFlo is finally a decent replacement for SPB Mobile Shell.
However, I still miss the Tasks window to complete the tabs list...
Related
Any1 know how to completely disable (i dont want it in memory too) Touch FLO?
Hey...
Try this:
\\\REGISTRY\HKLM\Software\OEM\TFLOSettings\
EnableCube = 0 (original = 1)
It worked on my MDA Touch and i know it worked on some Orbit 2 too....
Tweaking instead of On/Off
The Polaris also has a number of other registry entries under TFLOSettings that, in addition to allowing you to turn Touch FLO on or off, also enable you to tweak its sensitivity. Does anyone know if these settings documented somewhere? I've done a search and found bits and pieces of information but not all the information in one place. Thanks.
WHY, oh why?
wonderiuy said:
Any1 know how to completely disable (i dont want it in memory too) Touch FLO?
Click to expand...
Click to collapse
Question: Why would you want to disable TouchFLO? I personally think TFLO is the best invention since sliced bread...
http://forum.xda-developers.com/showthread.php?t=351082
GenghisKhent said:
The Polaris also has a number of other registry entries under TFLOSettings that, in addition to allowing you to turn Touch FLO on or off, also enable you to tweak its sensitivity. Does anyone know if these settings documented somewhere? I've done a search and found bits and pieces of information but not all the information in one place. Thanks.
Click to expand...
Click to collapse
I found this http://forum.xda-developers.com/showthread.php?t=351082 under Tips & Tricks (post #6) from the Nike forum but it works on the Polaris. I changed the Touch Flo settings on both my Nike and Polaris from 15 to 50 and now it's much faster. Hope this helps, let me know.
Excluding Apps from TouchFlo
badaccent said:
Question: Why would you want to disable TouchFLO? I personally think TFLO is the best invention since sliced bread...
Click to expand...
Click to collapse
I like TFLO. However, certain apps like PhatPad which I use don't behave well with it. So I would like to exclude certain apps from TFLO. I could do this with fTouchFlo by editing a config file. However, I don't know how to do this with TFLO and a search didn't find anything. Anyone help would be appreciated.
Disable TouchFLO - to do or not to do . . .
badaccent said:
Question: Why would you want to disable TouchFLO? I personally think TFLO is the best invention since sliced bread...
Click to expand...
Click to collapse
Good for you. To each his own.
I DON'T like it.
I want to use stylus or buttons only. I don't give a damn about finger functions on the screen.
Let people do what they want. Help them if you are interested and you can, but no need to denigrate them.
Don't take this as a flame - no offense intended - I just recognize that whatever feature exists for any mechanical device, some will love it, some will be indifferent, some will hate it.
GenghisKhent said:
I like TFLO. However, certain apps like PhatPad which I use don't behave well with it. So I would like to exclude certain apps from TFLO. I could do this with fTouchFlo by editing a config file. However, I don't know how to do this with TFLO and a search didn't find anything. Anyone help would be appreciated.
Click to expand...
Click to collapse
I am not sure that is possible. Your best best is to make the PhatPad developers aware of whatever issues you are having so a possible fix can be applied to future versions of the app.
I want also disable TouchFlo and replace it with the 4 cube version SCLPF
Hello, I have my polaris for a week now.
But I have the oppsite problem. My TFLO is disabled, but I don't know why!
I dont have my Polaris in landscape mode, so it should work.
I don't have any strange programms installed.
Can anyone help me with this?
TFLO has reg settings to disable for certain apps. Eg there's one for photo album there.
Is there anyway I can benefit from TouchFlo and some of the SPB softwares (like phone suite, Spb diary, mobile shell etc.) both?
I would like to see multiple appointments on my today screen and also the task list by categories which is very important.
Moreover, I have found that the sound stuff doesnt work properly on any of these roms available here unless i use mobile shell which really keeps phone silent only when i have a calender item that marks me busy. TouchFlo sound option keeps the phone silent eventhough someone's birthday is there on the calendar or even if my out of office event is there on calendar..
when i killed twice manilla2d.exe all that absolutly useless (for me and maybe some other users) stuff as panel in the bottom and large alarm clock which makes my device stupid disappeared. now there is clean screen with wallpaper. very nice, i like it but there is string "tap here to launch touchflo tm". is it possible to disable manilla2d.exe startup on every boot and this start link on the screen? (via system registry file?)
so when it is completely disabled it would be perfect to have some tiny alternative as clock in system tray or on the screen. and one more useful possible function is smth like custom desktop shortcuts.
do you now such software programs?
htc touch elf, wm 6.1
Moved of: HTC Polaris: Touch Cruise > Touch Cruise ROM Development
To: HTC Polaris: Touch Cruise > Touch Cruise General
Please put your questions to: Touch Cruise General
I read a little and apparently it is not possible ,at the moment, to incorporate "Phone Alarm" into TouchFlo 3D.
Well this pisses me of because I spent over $1000.00 on that new device and I can't even configure it the way I want and use the apps or "Tools" I like and need the way I want it....
So the goal of this Thread is to see if there are others in the same situation and maybe team up to try to find someone that has the Resources, Knowledge and the Time to make this request possible...
I've been reading on this site for almost two years and became a member (not too active) close to a year now and can honestly say that there is some super brilliant minds in here, not all, but some, that could probably write a "Patch" or even Rewrite this TouchFlo3D SW that would allow it to be personalized and more user friendly.
There is four things that I would like to get in this new TF3D
1- Ability to have TF3D and PA (Phone Alarm) to run simultaneously (without the need of a 3rd party sw)
2- Have the "Top Bar" or "Bottom Bar" to display the actual PA "Profile"
3- Have a large PA "Scroller" field (somewhere)
4- Link the "little WM Alarm Clock" to PA's Alarm instead.
If there are some others in the same situation, please let it be known...
I am really please with using SecondToday making the left softkey open SecondToday from the Home Page of Touchflo 3D.I know you said no third party software but it is really nice to have the "best" of both worlds in using ToucFlo as it was designed and having a whole new Today screen for PhoneAlarm. With the power of our device there is absolutely no lag when switching between SecondToday today screen and Touchflo "today" screen.
this really works and I'm actually glad to have touchflo and phonealarmon different pages
ps I have a nice vga skin for PA and TodayAgenda on my secondtoday today screen
jcrompton said:
I am really please with using SecondToday making the left softkey open SecondToday from the Home Page of Touchflo 3D.I know you said no third party software but it is really nice to have the "best" of both worlds in using ToucFlo as it was designed and having a whole new Today screen for PhoneAlarm. With the power of our device there is absolutely no lag when switching between SecondToday today screen and Touchflo "today" screen.
this really works and I'm actually glad to have touchflo and phonealarmon different pages
ps I have a nice vga skin for PA and TodayAgenda on my secondtoday today screen
Click to expand...
Click to collapse
What skin do you use for PhoneAlarm ?
I didn't find a nice one yet so I now use PhoneWeaver with SecondToday instead of PhoneAlarm but I want to use PhoneAlarm again.
I've used PhoneAlarm on my TytnII for almost a year and is way better than PhoneWeaver.
I was just wondering how many people do not run the TF3D program on their TP or Fuze? And to those who do not run it what do your home screens look like? WHat programs do you customize your phone with? Just wondering cause I was going to get off the TF3D wagon for a while just for a change.
I use SPB shell and suite.
After a week with the Tilt, the excitement of TF3D wore off, so I finally removed it from the phone. I'm now running a VGA version of HTC Home, which I really like. Of course, nothing is perfect, and current problems are:
1. No customization program for VGA version of HTC Home
2. Contacts tab doesn't work (don't care about this, as I don't use that tab anyway)
3. Weather tab works, but available cities are limited
4. Program launcher tab only has room for 9 programs
Below the HTC Home section of my main screen, I also have my calendar, a Live Search plugin (for web searches right from the desktop), and a device locking button.
The only thing I miss from TF3D is the Intenet tab; I liked having the tab list my favorite pages.
- DDB
I have a few questions about Manila 2d that I have downloaded on my Samsung Omnia (VZ i910).
-How can you add contacts to your people menu?
-How can you add programs to the program menu?
*I have clicked on both, held each spot, but nothing happens.
-How can I set up my location for the weather tab?
*I have tried to click add location, but nothing works
-I have tried to download a new theme, however each and every time I do so (following directions) the interface only takes up 2/3 of the screen leaving a small area at the bottom under the different tabs of extra space. I had a feeling that perhaps the files I was downloading weren't QVGA, but I downloaded another and it still didn't work.
Also, is there a reliable Manila 2d that supports landscape? I heard some member here was working on it.
Any suggestions are welcomed.
hmmmmm
i too have the omina i910...iim about to install Manila on my phone...but too sure anymore...lol
how is it......
76BluRay said:
I have a few questions about Manila 2d that I have downloaded on my Samsung Omnia (VZ i910).
-How can you add contacts to your people menu?
-How can you add programs to the program menu?
*I have clicked on both, held each spot, but nothing happens.
-How can I set up my location for the weather tab?
*I have tried to click add location, but nothing works
-I have tried to download a new theme, however each and every time I do so (following directions) the interface only takes up 2/3 of the screen leaving a small area at the bottom under the different tabs of extra space. I had a feeling that perhaps the files I was downloading weren't QVGA, but I downloaded another and it still didn't work.
Also, is there a reliable Manila 2d that supports landscape? I heard some member here was working on it.
Click to expand...
Click to collapse
The landscape part, I would check the main M2D thread. I believe that Helmi was close to getting it done. Which version of M2D are you using? I ask because the version might actually be the reason why you can't get it to work properly. I have seen that problem a few times in the early versions of M2D, where people had all sorts of issues adding things to the launchers. Let us know so that we can help you out.
I just spent the last 3 hours getting all the nessary information to install Manila 2D on my Omnia. I got it working. now the only thing is the the flow menu that you use to navigate between all the features (Home, Contacts, Messages, Internet etc...) is 3/4 way down the screen its not at the bottom where it should be. so when i go to Contacts the flow menu is 3/4 way down but all my contacts go down to the bottom. is there anyway to fix this
Thanks
Is there a way to get rid of the quicklinks and add a the tasks application in it's place? Or even have a tasks tab in Sense 2.5/ The HTC Leo/HD2 (Aus) is a great phone, but will end up having to go back to standard 6.1 style windows due to lack of tasks tab/manager. Been searching all day to no avail.
Hmmm, I put my task in the quicklinks.
can you explain how did you display the tasl in your quicklinks?
I too would LOVE to have tasks incorporated into Sense, either into the Calendar-tab or as a stand-alone tab.
I presently use a combination of pTasks (from this forum) and Pocket Informant (set up to show tasks in the calendar views) to access my tasks.
Both are very helpful programs but still I am not 100% satisified.
Sadly the developer of pTasks has clearly stated that there will be NO pTasks tab for Sense so that ends that hope.
I love the tweaked setup of my HD2 now and the only thing I really miss is the ability to see and modify my tasks directly in Sense!
If anyone in this great forum has any info on the 'Tasks-in-Sense' request please share!!
I'd also love to have a Tasks Tab or inside Calendar Tab or on Home Tab. Any of the three solution would have a great appreciation I think. Poll on this?
http://forum.xda-developers.com/showthread.php?t=659089
Co0kie's Home Tab has support to display tasks on the home screen And lots more to boot
madindehead said:
Co0kie's Home Tab has support to display tasks on the home screen And lots more to boot
Click to expand...
Click to collapse
Cookies Home Tab 1.8.5 is THE solution - do not waste time looking any further - IT ROCKS !!!