I've got I-mate kjam....
while I was updating with crossbow wm6 rom package rom update stopped at % 99 and auto resetted. now my k-jam is only four colour screen. in four colour screen right up writes RUU. IPL 2.16. SPL 2.16. How can I solve this problem please help me!!!!!!!!
wizard service tool program says in this picture.
http://img453.imageshack.us/img453/1223/hata1tc7.jpg
how can I solve this problem???
Have you even tried to look at the stickies at the top of this forum? Specifically the one on How to flash a rom? http://forum.xda-developers.com/showthread.php?t=298613
You are in the bootloader. Just flash an official rom (or if you have a G4 then flash the Wizard Love rom). Links are in the above post and all the steps for how to do this properly and recover from stuff like this.
Related
hi there
i am using imate jamin da problem with my cell is
i upgraded my rom to qtek 2.20000 it was working absolutely fine with 8 icons in my comm manager then i upgraded to RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-b1 and it has severely damaged my cell as my phone my phone hangs white booting it shows me the colour screen with
IPL 1.00 and SPL 2.20.0001
on the Screen
OS and GSM is not displayed
I tried rom update several times but its not working
i even tried to format my phone but it gives FAT16 format failed
I even tried to upgrade to jesters RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1 but still its not working and givng same problem
now i dont understand what to do
i just brought this phone from dubai last month its under warranty will imate people sort this problem ????
guys please give me Advice and solution for this IPL SPL Problem
Thanks in Advance
Hello, I feel sorry for your bricked Prophet but here some informations. First of all, there is no need to write in big red letters. This usually annoy people or make them feel offended. You are not more important than others - who have their own problems as well. Writing normally would usually give better chances for a reply.
Here some feedback for your problem :
a) As long as you can get back into the boot loader as long everything is recoverable (hold camera button and reset and keep the camera button pressed until you get into the boot loader with the different colors). As long as this is still there as long you can recover.
b) Get an official ROM from your service provider for your Prophet and flash it back.
c) Only problem you might have is the updated boot loader (2.20).
big red annoys me.
You did not try to flash your G3 phone with a G4 rom now did you? (or G4 with G3 rom..)
As Spatzm said: Try to get into bootloader. If that works try updating again with the official qtek 2.20 rom. (here). And READ that topic about how to install and get yourself the ROMUpdateUtility_NoID.exe from the ftp (see wiki).
Since you tried to update with the 2.20 rom (which is the base of Jesters rom) you cannot downgrade, that's why you need to use the 2.20 official qtek rom (which is suitable for both G3 and G4). You can only downgrade if you have a CID unlocked G3 (if you don't know if it's CID unlocked then it's not ) with a G4 device you cannot downgrade to put it down shortly.
I today installed the RUU_Prophet_220734_2207114_024721_NVID Rom on my existing Smart 1v2 it went fine but then at 95% it stopped saying .nbf file not supported with ur model now it only opens in bootloader mode n when i tried the JAMin orignal ROm JAMin_213923_2139126_022021_ship it says get a new one
PLZZZzzzzzzz someone help cuz Imate has only released this ROM............
try several times...sure it will work
Which rom should i try the NVID one or my JAMin ROm
Dude i tried like 7 or 8 times everytime i get the same errors
for the NVID I GET at 95 % this error
Error [326] INVALID COMMAND
this NBF file cannot be used for your PDA phone.Please check your NBF file.
for the imate rom i get at the beginning
rror [296] Upgrade only
This NBF cannot be used for your phone.Please get newer NBF.
PLZ help im totally stuck wat should i do,,,,,,,,,,,
Fady said:
Dude i tried like 7 or 8 times everytime i get the same errors
for the NVID I GET at 95 % this error
Error [326] INVALID COMMAND
this NBF file cannot be used for your PDA phone.Please check your NBF file.
for the imate rom i get at the beginning
rror [296] Upgrade only
This NBF cannot be used for your phone.Please get newer NBF.
PLZ help im totally stuck wat should i do,,,,,,,,,,,
Click to expand...
Click to collapse
Put the device into bootloader and flash with an official ROM.
The device only opens in bootloader now n by da way i cannot use my imate official Rom so which should i try now............
Try downloading the official i-mate Jamin ROM. When you've downloaded the ROM skip the first to steps. Before it checks the device reset the device so you will have an USB connection. If you wait to long the USB connection gets lost.
You did a mistake when you upgrade to the useless 3.08 IPL SPL, I think you have less feature now with official ROMs
You can't flash your phone with any official NBF (ROM) unless you unlock the CID, to downgrade IPL SPL
Unlock your CID I think you have a G3 device and you can install any ROM you want, if you don't what G3 mean, look what G device you have in the WIKI
If you have G4 the only solution is Extract the NBF and make a new one without IPL SPL and you can install any ROM you want
But you didn't brick your phone ask before any step you will make before you brick it
Yes i have a G3 device n how can i unlock the CID plz tell me the steps n I will do as you will say...............
Ive searched in wiki but the unlocking has been tried on ipl spl 2.09-2.20
would it work on my stupid IPL SPL 3.08
Dude just gimme all the steps i should do now n the links for any softs I need if u can n Plz tell me how can i get rid of this stupid IPL SPL 3.08 Again
THANX A LOT IN ADVANCE
Waiting for your Reply!!!!!!!!!!!!!!!!!
N also my device opens in bootloader only...................
look at this thread - it should help
http://forum.xda-developers.com/showthread.php?t=300356
also the first post on page 3 of that thread has a link to the instructions to CID unlock a G3
Good luck
Fady said:
Ive searched in wiki but the unlocking has been tried on ipl spl 2.09-2.20
would it work on my stupid IPL SPL 3.08
Dude just gimme all the steps i should do now n the links for any softs I need if u can n Plz tell me how can i get rid of this stupid IPL SPL 3.08 Again
THANX A LOT IN ADVANCE
Waiting for your Reply!!!!!!!!!!!!!!!!!
N also my device opens in bootloader only...................
Click to expand...
Click to collapse
I see ok lemme check the site.........
Thanks A lot man I owe u one Now lets see if its workin for ME............
can I downgrade to my older IPL SPL vers..........
No - once you have upgraded ipl/spl you are stuck with them. Do not got to v 3.08!!!
Fady said:
Thanks A lot man I owe u one Now lets see if its workin for ME............
can I downgrade to my older IPL SPL vers..........
Click to expand...
Click to collapse
Doesnt matter now if im stuck well it WORKED my JAMin is again alive Thanks a lot again for telling me the link n thanks a lot for helping everyone out with the nb2nb tools n stuff n all the instructions n thanks to everyone for their advices All u senior members rock...........................
Fady said:
I today installed the RUU_Prophet_220734_2207114_024721_NVID Rom on my existing Smart 1v2 it went fine but then at 95% it stopped saying .nbf file not supported with ur model now it only opens in bootloader mode n when i tried the JAMin orignal ROm JAMin_213923_2139126_022021_ship it says get a new one
PLZZZzzzzzzz someone help cuz Imate has only released this ROM............
Click to expand...
Click to collapse
try to upgrade to latest Radio Rom and then try to upgrade the latest rom u would see its running ok
Highes IPL/SPL Versions win!
If you have install IPL/SPL 3.08 ... no downgrade in the moment!
Wats the advantage of this IPL SPL 3.08
i have only seen one change n its that I cant get my imate rom back without editing it n removing IPl Spl from it...............
u try try this method.
i found the solution. i get this <RUU_Prophet_220734_2207114_024721_NVID>
rom before. i try this rom can complete to fixed the bootloader screen!
thx a lot
i think maybe the wm6 rom cht have the problem , then make the machine cannot finish to flash the system.
Hi I have a G4 Prophet and the IPL and SPL version number reads 2.10.0001.
I would like to flash it to use a WM6.1 ROM with the touchflo type functionality and new IE Mobile features (i.e. zooming).
I have read through all the guides about carrying this out and have even started having a go but am getting confused about HardSPL.
From what I read HardSPL CID Unlocks your phone so that you can install a diffeerent Carrier (e.g. Orange, Vodaphone) ROM ... or in fact a home 'cooked' ROM off of this site.
I have tried manually carrying out the HardSPL using both the Prophet Tools GUI and the command line batch file HardSPL however after the procedure finishes my IPL and SPL do not read differently as all posts indicate (i.e. they do not read 2.G4.4PDA) ... instead they remain as 2.10.0001.
I have seen the phone go to the tri-colour bootloader screen and even the progress bar go up correctly however when it reboots it says 2.10.0001. I'm assuming that I cannot go ahead and flash with a ROM (such as the Shadow TE one until the SPL reads 2.G4.4PDA).
Can anyone offere me some help with getting to this?
Many thanks.
Nick (a very much noob!)
nisgar2k said:
Hi I have a G4 Prophet and the IPL and SPL version number reads 2.10.0001.
I would like to flash it to use a WM6.1 ROM with the touchflo type functionality and new IE Mobile features (i.e. zooming).
I have read through all the guides about carrying this out and have even started having a go but am getting confused about HardSPL.
From what I read HardSPL CID Unlocks your phone so that you can install a diffeerent Carrier (e.g. Orange, Vodaphone) ROM ... or in fact a home 'cooked' ROM off of this site.
I have tried manually carrying out the HardSPL using both the Prophet Tools GUI and the command line batch file HardSPL however after the procedure finishes my IPL and SPL do not read differently as all posts indicate (i.e. they do not read 2.G4.4PDA) ... instead they remain as 2.10.0001.
I have seen the phone go to the tri-colour bootloader screen and even the progress bar go up correctly however when it reboots it says 2.10.0001. I'm assuming that I cannot go ahead and flash with a ROM (such as the Shadow TE one until the SPL reads 2.G4.4PDA).
Can anyone offere me some help with getting to this?
Many thanks.
Nick (a very much noob!)
Click to expand...
Click to collapse
I would recommend you use something like: http://forum.xda-developers.com/showthread.php?t=353547 It makes it a one stop upgrade... That uses "JumpSPL" rather than HardSPL which is the short term option.
Thanks for the help I tried the alternative lazy tool and it worked (http://forum.xda-developers.com/showpost.php?p=2141436&postcount=188) now my Orange SPV M600 has the Shadow Touch edition rom on it with the shadow cube addon, so far works a treat.
I would still be interested to know why the SPL version number did not change using the prophet tools or HardSPL on its own.
Anyway many thanks again.
Nick
nisgar2k said:
Thanks for the help I tried the alternative lazy tool and it worked (http://forum.xda-developers.com/showpost.php?p=2141436&postcount=188) now my Orange SPV M600 has the Shadow Touch edition rom on it with the shadow cube addon, so far works a treat.
I would still be interested to know why the SPL version number did not change using the prophet tools or HardSPL on its own.
Anyway many thanks again.
Nick
Click to expand...
Click to collapse
What is your devices IPL?
It may be because Soft/Jump SPL was not executed properly prior to HardSPL (this is automated through the HardSPL tools and Prophet Tools).
HardSpl Problem
l3v5y said:
What is your devices IPL?
It may be because Soft/Jump SPL was not executed properly prior to HardSPL (this is automated through the HardSPL tools and Prophet Tools).
Click to expand...
Click to collapse
i ran upgrade_hardspl_g4 on my prophet, my spl is 2.15 still... what should i do l3v5y? tried flashing it 5 times still no luck. Please help, having a hard time upgrading roms...
ipl: 2.20
spl: 2.15
im currently downloading prophet tools 2.8. i currently flashed my 818 with PV_temp rom. i'll try to install the prophet tools and hardspl my phone with it.. hope it works...will update in a few after the installation is done... downloading so slow... =(
*-----------------------------*
i did it!! thanks!!!
I made it, use SoftSPL.
i got elfin and i want to ask if it is any way to flash rom in bootloader mode,i want just to got my htc working again and my device is stucked at bootloader showing in right top corner RUU and on left IPL And SPL numbers.
ms2405 said:
i got elfin and i want to ask if it is any way to flash rom in bootloader mode,i want just to got my htc working again and my device is stucked at bootloader showing in right top corner RUU and on left IPL And SPL numbers.
Click to expand...
Click to collapse
hey, i just took a brief look in the elfin section. Go there and look at the stickies, there are guides for un bricking yoiur elfin and a good guide on how to correctly hardspl and flash....DO READ THEM (and you normally should flash a rom from bootloader in any case )
If you dont want to hardspl, then try the uspl way. You didnt say what rom you had tried to flash or wot you have done to get it stuck in bootloader.
Also are you using vista or xp on your computer?
i'm using xp on my comp,i got to bootloader because i tried to flash some roms and when i tried last time flashing onyx one it showed me error message and then started the problem.
ok, did u hard-spl sucessfully? what is you ips/spl shown on bootloader?
IPL is 2.26.0002
SPL is 2.26.0000 and as i said in right top corner RUU,
i've tried to flash it from sd card,but it ain't worked andlooked at goldcard method and i haven't got another winmo devic and don't know somebody who has,please help me to unbrick my phone,it was both from orange uk.
ms2405 said:
IPL is 2.26.0002
SPL is 2.26.0000 and as i said in right top corner RUU,
i've tried to flash it from sd card,but it ain't worked andlooked at goldcard method and i haven't got another winmo devic and don't know somebody who has,please help me to unbrick my phone,it was both from orange uk.
Click to expand...
Click to collapse
Please have a look at post 3 from here : http://forum.xda-developers.com/showthread.php?t=408637
Is this what you have tried doing previously?
Did you unlock your elfin first if it is locked on orange network?
If you cant get it working after trying this, go back to first link above and flash back an original stock rom, at least ur device will be working again!!
ps when u hardspl and tried to flash, did u disable antivirus on PC, and disconnect all other non essential usb devices? This is an commen cause of bad flashes, also try other usb ports, 2 of mine i cant flash on, 2 i can (which is wierd) - (i have experienced this myself).
If any of this doesnt help, as for help in the elfin section, but DO describe all your steps properly and fully and enclose links of roms tried etc so someone with an elfin can see what you have donw and save unnecassary posts etc.
mate,the link you gave me is that when i upgraded my elfin when it was working, i don't know what you mean about unlocked it is sim unlocked what about cid i really don't have idea,because i couldn't connect to mtty,please can you give me the link for original stock rom for my elfin,because i haven't done backup and i downloaded one but i don't know how to put in when i got in bootloader only and can't connect acivesync please tell me how to this aswell,PLEASE HELP ME UNBRICK MY ELFIN!!
Have you resolved this?
Search and download a stock rom from HTC or from here, use the search and wiki, you will find one there.
When you plug in ur elfin into the computer and put it in bootloader, do you see "USB" on the screen along with ur ipl and spl?
You should, and if you do you should be able to flash the stock rom on.
I tried to update HardSPL 3.29 on my friend's Kaiser from AT&T. But it still stucked.
I run SDA-Unlocker .It shows ok.
After serveral tries the phone stucked So i use Kaiser SuperCID and Security Unlocker v0.1 by ockyw2001SPL and do step 1. I don't know what i have exactly done.
During copy it stays at 95 % !
Now every time i boot the device it shows only the bootloader
KAIS1*0
SPL-3.56.0000
CPLD-8
Seial
I can't upgrade other ROM any more.
I think i should take HardSPL 3.56force USB ? because ATT already has SPL 3.56 and WM I 6.1
What have i to do now ? I'm a little confuse because the phone of my friends. That is the gift from his brother. :-(
read this then go to the sticky at the top of this forum and follow the links to the right thread for you to ask this in, good luck.
Ok ! I folow http://forum.xda-developers.com/showthread.php?t=420683
and tried to flash SPL 3.29 again. But it still stucked at 0%.
I will try the SD version.
Other question: should the battery loading at in bootloader ?
Hi,
Try re-flashing the stock ROM for the phone. You'll either find it on the wiki or on your carriers website.
Any more problems, please post in this thread : http://forum.xda-developers.com/showthread.php?t=423486 (after reading the 1st post o/c)
Dave